Scx-4200 internal error - false

scx-4200 internal error - false

hi, I have a problem with my printer. As soon as I do to print, I get a white sheet with some writing internal error false. along with guides you could enjoy now is Samsung Scx 4200 Scanner Manual below. customer-friendly technician Review Questions—including true/false. The output tray is full. Once the paper is removed from the output tray, the machine resumes printing. The machine selects print materials from the wrong. scx-4200 internal error - false

Samsung SCX-4200 3.2.2 Scan Part, 3.2.3 Ope Pannel

System Overview

Samsung ElectronicsService Manual

3-11

3.2.2 Scan Part

1) Pictorial signal input part: output signal of CIS passes through Bypass Cap change to ADC at IPMain and

defined signal between AFE and IPMain processes the Image signal. When AFE accept each pixel, scx-4200 internal error - false, CDS

(Correlated Double Sampling) technique which samples arm-level twice is used on each pixel by using IP

signal.

2) Pictorial image processing part: read CIS Pixel data in terms of 600dpi Line and process LATalgorithm on

text mode, scx-4200 internal error - false, Error Diffusion Algorithm on Mixed mode, and store Data at Scan Buffer on PC Scan mode without

algorithm. On every mode Shading Correction and Gamma Correction are executed ahead then processing is

executed later.

* Scan Image Control Specification

Minimum Scan Line Time: 1.23ms

Scan Resolution: Max. 600 x 2400 DPI (optical)

Scan Width: 216mm

main function

- Internal 10bit ADC

- White Shading Correction

- Gamma Correction

- CIS Interface

- 256 Gray Scale

3) CIS Operating Part : CIS use +3.3V

- CIS Maximum Operating Frequency : 5MHz

- CIS Line time : 1.63ms

- White Data output Voltage : 1.7V -(Mono Copy, 5ms/line)

3.2.3 Ope Pannel

1) Configuration

Operation Panel uses Main Control and separated Ope Chip Micom and work as inner program, systemic

operation is serial system which exchange Data with SIO Port of Main Control. Ope Panel is approximately

composed of Micom part, Matrix part and LCD.

2) Micom controller

Micom has ROM, RAM, I/O Port built-in and displays and lights LCD by CPU command of Main Control Part

and report Key recognition Data to Main Control Board.

Z7_M0I02JG0KGVO00AUBO4GT60082

hp-software-driver-metadata-portlet

Actions

HP Support Solutions is downloading


This product detection tool installs software on your Microsoft Windows device that allows HP to detect and gather data about your HP and Compaq products to provide quick access to support information and solutions. Technical data is gathered for the products supported by this tool and is used to identify products, provide relevant solutions and automatically update this tool, scx-4200 internal error - false, to improve our products, solutions, services, and your experience as our customer.

Note: This tool applies to Microsoft Windows PC's only. This tool will detect HP PCs and HP printers, scx-4200 internal error - false.

Data gathered:

  • Operating system
  • Browser version
  • Computer vendor
  • Product name/number
  • Serial number
  • Connection port
  • Driver/device description
  • Computer and/or printer configuration
  • Hardware and software diagnostics
  • HP/Non-HP ink and/or HP/Non-HP Toner
  • Number of pages printed

Installed Software Details:

  • HP Support Solutions Framework - Windows Service, localhost Web server, and Software

Removing Installed Software:

  • Remove "HP Support Solutions Framework" through Add/Remove programs on PC

Requirements:

  • Operating System - Windows 7, Windows 8, Windows 8.1, Windows 10
  • Browser - Google Chrome 10+, scx-4200 internal error - false, Internet Explorer (IE)10.0+, and Firefox 3.6.x, 12.0+

Detected operating system:Selected operating system:Select your operating system and version,

Change

This product detection tool installs software on your Microsoft Windows device that allows HP to detect and gather data about your HP and Compaq products to provide quick access to support information and solutions. Technical data is gathered for the products supported by this tool and is used to identify products, provide relevant solutions and automatically update this tool, to improve our products, solutions, services, and your experience as our customer.

Note: This tool applies to Microsoft Windows PC's only. This tool will detect HP PCs and HP printers.

Data gathered:

  • Operating system
  • Browser version
  • Computer vendor
  • Product name/number
  • Serial number
  • Connection port
  • Driver/device description
  • Computer and/or printer configuration
  • Hardware and software diagnostics
  • HP/Non-HP ink and/or HP/Non-HP Toner
  • Number of pages printed

Installed Software Details:

  • HP Support Solutions Framework - Windows Service, localhost Web server, and Software

Removing Installed Software:

  • Remove "HP Support Solutions Framework" through Add/Remove programs on PC

Requirements:

  • Operating System - Windows 7, Windows 8, Windows 8.1, Windows 10
  • Browser - Google Chrome 10+, Internet Explorer (IE)10.0+, and Firefox 3.6.x, 12.0+
Please wait

HP has scanned your product but currently has no suggestions for driver updates.

The list of all available drivers for your product is shown above.

HP encountered an error while trying to scan your product.

Please verify your product is powered on and connected, then try again in a few minutes.

Or, view all available drivers for your product below.

The list of recommended drivers for your product has not changed since the last time you visited this page.

Choose 'Refresh' to update the list.

Select the desired files and choose 'Download files' to start a batch download.

Select your desired files and a list of links will be sent by email

The machine does not print.

The machine is not receiving power.

Connect the machine to the electricity supply first. If the machine has a () button on the control, press it.

The machine is not selected as the default machine.

Select your machine as your default machine in Windows.

Check the machine for the following:

If a system error occurs, contact your service representative.

The connection cable between the computer and the machine is not connected properly.

Disconnect the machine cable and reconnect it (see Rear view).

The connection cable between the computer and the machine is defective.

If possible, attach the cable to another computer that is working properly and print a job. You can also try using a different machine cable.

The port setting is incorrect.

Check the Windows printer settings to make sure that the print job is sent to the correct port. If the computer has more than one port, make sure that the machine is attached to the correct one.

The machine does not print.

The machine may be configured incorrectly.

Check the to ensure that all of the print settings are correct.

The printer driver may be incorrectly installed.

Uninstall and reinstall the machine’s driver.

The machine is malfunctioning.

Check the display message on the control panel to see if the machine is indicating a system error. Contact a service representative.

The document size is so big that the hard scx-4200 internal error - false space of the computer is insufficient to access the print job.

Get more hard disk space and print the document again.

The output tray is full.

Once the paper is removed from the output tray, the machine resumes printing.

The machine selects print materials from the wrong paper source.

The paper option that was selected in the may be incorrect.

For many software applications, the paper source selection is found under the tab within the (see Opening printing preferences). Select the correct paper source. See the printer driver help screen (see Using help).

A print job is extremely slow.

The job may be very complex.

Reduce the complexity of the page or try adjusting the print quality settings.

Half the page is blank.

The page orientation setting may be incorrect.

Change the page orientation in your application (see Opening printing preferences). See the printer driver help screen (see Using help).

The paper size and the paper size settings do not match.

Ensure that the paper size in the printer driver settings matches the paper in the tray.Or, ensure that the paper size in the printer driver settings matches the paper selection in the software application settings you use (see Opening printing preferences).

The machine prints, but the text is wrong, garbled, or incomplete.

The machine cable is loose or defective.

Disconnect the machine cable and reconnect. Try a print job that you have already printed successfully. If possible, attach the cable and the machine to another computer that you know works and try a print job. Finally, try a new machine cable.

The wrong printer driver was selected.

Check the application’s printer selection menu to ensure that your machine is selected.

The software application is malfunctioning.

Try printing a job from another application.

The operating system is malfunctioning.

Exit Windows and reboot the computer. Turn the machine off and back on again.

Pages print, but they are blank.

The toner cartridge is defective or out of toner.

Redistribute the toner, if necessary. If necessary, replace the toner cartridge.

The file may have blank pages.

Check the file to ensure that it does not contain blank pages.

Some parts, such as the controller or the board, scx-4200 internal error - false, may be defective.

Contact a service representative.

The machine does not print PDF files correctly. Some parts of graphics, text, or illustrations are missing.

Incompatibility between the PDF file and the Acrobat products.

Printing the PDF file as an image may enable the file to print. Turn on from the Acrobat printing options.

[Note]

It will take longer to print when you print a PDF file as an image.

The print quality of photos is not good. Images are not clear.

The resolution of the photo is very low.

Reduce the photo size. If you increase the photo size in the software application, the resolution will be reduced.

Before printing, the machine emits vapor near the output tray.

Using damp paper can cause vapor during printing.

This is not a problem. Just keep printing.

The machine does not print special-sized paper, such as billing paper.

Paper size and paper size setting do not match.

Set the correct paper size in the in tab in (see Opening printing preferences).

The printed billing paper is curled.

The paper type setting does not match.

Change the printer option and try again. Go toclick tab, and set type to (see Opening printing preferences).

FedoraForum.org > Fedora 35/36 > Hardware > Samsung SCX4200 refuses to print


PDA

View Full Version : Samsung SCX4200 refuses to print



xeonman9000

3rd November 2006, 07:25 PM

Hi, I recently bought a Samsung SCX 4200 multi-function printer/scanner/copier after seeing that Samsung released Linux drivers for it.
So I plugged it in, downloaded the drivers, installed them, rebooted and. it won't print, it revs up for a few seconds and displays "Printing." on the Scx-4200 internal error - false screen, then it stops scx-4200 internal error - false displays "Ready".
The scanner and copier work fine.

EDIT: It works fine under Windows :mad:.


LocutusOfBorg

3rd November 2006, 09:44 PM

did you already read this?
http://www.linuxprinting.org/show_printer.cgi?recnum=Samsung-SCX_4200


xeonman9000

3rd November 2006, scx-4200 internal error - false, 10:25 PM

Yeah That was the page that made me buy the printer in the first place!
I just found a .ppd file called scx4200.ppd in the tar i downloaded from Samsung and configured CUPS through localhost:631 like that page suggested and I tried to print a testpage and got the following error:


SamaungSCX4200
<http://localhost.localdomain:631/printers/SamaungSCX4200> (Default
Printer) "Filter "rastertosamsungspl" for printer "SamaungSCX4200"
not available: No such file or directory"

It also said this: "/usr/lib/cups/filter/rastertosamsungspl failed"

Any ideas?
Cheers.


xeonman9000

6th November 2006, 04:30 PM

I booted up both Knoppix 32-bit and Ubuntu 64-bit Live CD's, installed the downloaded driver and it worked perfectly both times. Is there something I'm missing with Fedora that needs to be installed?


xeonman9000

7th November 2006, 12:51 AM

Something is really wrong, it won't let me install the driver properly and when I try to use the help or setup in localhost::631 I get "Failed To Connect" errors and in printer setup in KDE, I get the error "server-error-service-unavailable" whenever I try to change any settings.
I tried searching the net for help but I really have no idea what the problem is, so I don't really know what to search for. I'm genuinely thinking of going through all the trouble of migrating to a different distroif I can't get this working. Which is a shame as FC is perfect for me.


harri

26th January 2007, 07:38 PM

hi,
have you tried to disable SELinux protection for printing? (System -> Administration -> Security Level and Firewall -> SELinux -> Modify SELinux policy -> Printing -> Disable protection for cupsd backend / daemon). This may help at least for printing problems (not sure about scanning yet).


bigfootnmd

26th January 2007, 08:48 PM

I will give you one simple answer. RTFM. Read the F****** Manual To get the Manual go here

http://www.samsung.com/support/productsupport/download/index.aspx

To download the required driver

http://www.samsung.com/support/productsupport/download/FileView.aspx?cttfileid=828690&type=MFP&typecode=300600&subtype=Multi+Function+Product&subtypecode=300601&cmssubtypecode=&model=SCX-4200&filetype=DR&language=

You must follow the instructions on this page to install the driver.

I hope this helps


xeonman9000

26th January 2007, 11:50 PM

Thanks Harri, turned out that was the problem.
Bigfoot, of you read the threead, you would know that I had already done that and got it working in other distros, just not FC6.


zenkoh

19th February 2007, 04:20 AM

Hi Xeonman900,

Looks like I'm not the only one with the printing problem. I'm using the SCX4216F printer and had exactly the same problem in Fedora Core 6. I'm now using Fedora Core 5 and stumble on the advice to disable SElinux protection for CUPS too (God bless the person who figured it out!). I did that and now it works perfectly! I'm so happy! Harri's right.

Just another note - after disabling the protection, one has to start the terminal and type in "service cups restart" (without the quotation marks) to restart cups. It may be necessary to start the Samsung Configurator and manually assign mf4 to the printer to get it working properly.

Good luck to all those who face the same problem!


krige

11th March 2007, 12:07 AM

I had the same problem with my Samsung SCX-4100 and solved it in the same way: disabling those two SELinux protection for printing and then running "service cups restart". I only wonder whether there are security concerns about disabling those protections.


Powered by vBulletin® Version 4.2.5 Copyright © 2022 vBulletin Solutions Inc. All rights reserved.

Thread: Setting Up Samsung SCX-4200 Multifunction Laser Printer & Scanner, Intrepid 32 bit

Hi Nick--

It was, indeed, an upgrade.

There is no error. When I opened Xsane, I used to get an image (as I still do at home when my Epson scanner is attached) that had two choices on it: the built-in camera, and the Samsung SCX-4200. Now, when I open Xsane, there is no "choice," it just goes straight to the camera, scx-4200 internal error - false, as if there is no other scanner scx-4200 internal error - false. When I open the Samsung Unified Driver Configurator, moreover, it only shows the camera under the "scanner" tab, though it shows the SCX-4200 under printers (at home, it shows the Epson under scanners). I'm wondering whether I should de-install everything and then go back through your script again and reinstall it. But then I need directions on how to uninstall (the uninstall option, for instance, under the Samsung Driver Configurator, won't let me proceed because it says I'm "not authorized" to do it.

Thanks for writing back to me.

Cheers,
Tamas

Samsung SCX-4200 - SCX-4200/XAA - User Manual (ENGLISH)

© 2008 Samsung Electronics Co., Ltd. All rights reserved.

This manual is provided for information purposes only. All information included herein is subject to change without notice. Samsung Electronics is not

responsible for any direct or indirect damages, arising from or related to use of this manual.

SCX-4200 and SCX-4200R are model names of Samsung Electronics Co., Ltd.

Samsung and Samsung logo are trademarks of Samsung Electronics Co., Ltd.

• IBM and IBM PC are trademarks of International Business Machines Corporation.

• PCL and PCL http error 503 are trademarks of Hewlett-Packard company.

• Microsoft, Windows, Windows Vista, Windows 7 and Windows 2008 Server R2 are either registered trademarks or trademarks of Microsoft Corporation.

• TrueType, LaserWriter and Macintosh are trademarks of Apple Computer, Inc.

• All other brand or product names are trademarks scx-4200 internal error - false their respective companies or organizations.

• Refer to the 'LICENSE.txt' file in the provided CD-ROM for the open source license information.

1


Contact SAMSUNG worldwide

If you have any comments or questions regarding Samsung products, contact the Samsung customer care center.

COUNTRY/REG

ION

CUSTOMER CARE

CENTER

WEB SITE

ARGENTINE 0800-333-3733 www.samsung.com/ar

AUSTRALIA 1300 362 603 www.samsung.com/au

AUSTRIA 0810-SAMSUNG (7267864,

€ 0.07/min)

www.samsung.com/at

BELARUS 810-800-500-55-500 www.samsung/ua

www.samsung.com/ua_ru

BELGIUM 02 201 2418 www.samsung.com/be

(Dutch)

www.samsung.com/be_fr

(French)

BRAZIL 0800-124-421

4004-0000

CANADA

1-800-SAMSUNG

(726-7864)

www.samsung.com/br

www.samsung.com/ca

CHILE 800-SAMSUNG (726-7864) www.samsung.com/cl

CHINA 400-810-5858

010-6475 1880

www.samsung.com/cn

COLOMBIA 01-8000112112 www.samsung.com.co

COSTA RICA 0-800-507-7267 www.samsung.com/latin

CZECH

REPUBLIC

800-SAMSUNG

www.samsung.com/cz

(800-726786)

Samsung Zrt., česká organizační složka, Oasis Florenc,

Sokolovská394/17, 180 00, Praha 8

DENMARK 8-SAMSUNG (7267864) www.samsung.com/dk

ECUADOR 1-800-10-7267 www.samsung.com/latin

EL SALVADOR 800-6225 www.samsung.com/latin

ESTONIA 800-7267 www.samsung.com/ee

KAZAKHSTAN 8-10-800-500-55-500 www.samsung.com/kz_ru

KYRGYZSTAN 00-800-500-55-500

FINLAND 30-6227 515 www.samsung.com/fi

FRANCE 01 4863 0000 www.samsung.com/fr

GERMANY

01805 - SAMSUNG

(726-7864 € 0,14/min)

www.samsung.de

GUATEMALA 1-800-299-0013 www.samsung.com/latin

HONDURAS 800-7919267 www.samsung.com/latin

HONG KONG 3698-4698 www.samsung.com/hk

www.samsung.com/hk_en/

HUNGARY

06-80-SAMSUNG

(726-7864)

www.samsung.com/hu

COUNTRY/REG

ION

INDIA 3030 8282

1800 110011

1800 3000 8282

www.samsung.com/in

INDONESIA 0800-112-8888 www.samsung.com/id

ITALIA 800-SAMSUNG (726-7864) www.samsung.com/it

JAMAICA 1-800-234-7267 www.samsung.com/latin

JAPAN 0120-327-527 www.samsung.com/jp

LATVIA 8000-7267 www.samsung.com/lv

LITHUANIA 8-800-77777 www.samsung.com/lt

LUXEMBURG 02 261 03 710 www.samsung.com/lu

MALAYSIA 1800-88-9999 www.samsung.com/my

MEXICO

01-800-SAMSUNG

(726-7864)

www.samsung.com/mx

MOLDOVA 00-800-500-55-500 www.samsung/ua

www.samsung.com/ua_ru

NETHERLANDS

0900-SAMSUNG

(0900-7267864) (€

0,10/min)

NEW ZEALAND 0800 SAMSUNG (0800 726

786)

www.samsung.com/nl

www.samsung.com/nz

NICARAGUA 00-1800-5077267 www.samsung.com/latin

NORWAY 3-SAMSUNG (7267864) www.samsung.com/no

PANAMA 800-7267 www.samsung.com/latin

PHILIPPINES

POLAND

PORTUGAL

1800-10-SAMSUNG

(726-7864)

1-800-3-SAMSUNG

(726-7864)

1-800-8-SAMSUNG

(726-7864)

02-5805777

0 801 1SAMSUNG

(172678)

022-607-93-33

80820-SAMSUNG

(726-7864)

www.samsung.com/ph

www.samsung.com/pl

www.samsung.com/pt

PUERTO RICO 1-800-682-3180 www.samsung.com/latin

REP. DOMINICA 1-800-751-2676 www.samsung.com/latin

EIRE scx-4200 internal error - false 717 100 www.samsung.com/ie

RUSSIA 8-800-555-55-55 www.samsung.ru

SINGAPORE

CUSTOMER CARE

CENTER

1800-SAMSUNG

(726-7864)

WEB SITE

www.samsung.com/sg

2


COUNTRY/REG

ION

CUSTOMER CARE

CENTER

WEB SITE

SLOVAKIA

SOUTH AFRICA

0800-SAMSUNG

(726-7864)

0860 SAMSUNG

(726-7864)

SPAIN 902-1-SAMSUNG(902 172

678)

SWEDEN 0771 726 7864

(SAMSUNG)

SWITZERLAND 0848-SAMSUNG (7267864,

CHF 0.08/min)

TADJIKISTAN 8-10-800-500-55-500

www.samsung.com/sk

www.samsung.com/za

www.samsung.com/es

www.samsung.com/se

www.samsung.com/ch

TAIWAN 0800-329-999 www.samsung.com/tw

THAILAND 1800-29-3232

02-689-3232

TRINIDAD &

TOBAGO

1-800-SAMSUNG

(726-7864)

www.samsung.com/th

www.samsung.com/latin

TURKEY 444 77 11 www.samsung.com/tr

U.A.E 800-SAMSUNG (726-7864)

8000-4726

U.K

U.S.A

0845 SAMSUNG

(726-7864)

1-800-SAMSUNG

(7267864)

www.samsung.com/ae

www.samsung.com/uk

www.samsung.com/us

UKRAINE 8-800-502-0000 www.samsung/ua

www.samsung.com/ua_ru

UZBEKISTAN 8-10-800-500-55-500 www.samsung.com/kz_ru

VENEZUELA 0-800-100-5303 www.samsung.com/latin

VIETNAM 1 800 588 889 www.samsung.com/vn

3


CONTENTS

1. Introduction

Special features . 1.1

Understanding component locations . 1.2

2. Getting started

Setting up your machine

Finding more information . 2.1

Selecting a location . 2.2

Installing the toner cartridge . 2.2

Loading paper . 2.3

Making connections . 2.5

Turning the machine on . 2.5

Setting up the machine system

Overview of control panel menus . 2.6

Changing the display language . 2.6

Using the save modes . 2.6

Printer software overview

Supplied printer software . 2.7

Printer driver features . 2.7

System requirements . 2.8

3. Loading original documents and paper

Loading document . 3.1

Selecting print scx-4200 internal error - false . 3.2

Loading paper . 3.5

Setting the paper size and type . 3.6

Selecting an output location . 3.6

4. Copying

Copying . 4.1

Changing the settings for each copy . 4.1

Changing the default settings . 4.2

Using special copy features . 4.2

Setting the time out option . 4.3

5. Basic printing

Printing a document . 5.1

Canceling a print job . 5.1

6. Scanning

Scanning basics . 6.1

7. Ordering toner cartridge

Toner cartridges . 7.1

How to purchase ., scx-4200 internal error - false. 7.1

8. Maintenance

Printing reports . 8.1

4


Clearing memory . 8.1

Cleaning your machine ., scx-4200 internal error - false. 8.1

Maintaining the toner cartridge . 8.3

Consumable and replacement parts . 8.4

9. Troubleshooting

Clearing paper jams . error fraps is detected 111 the Status LED . 9.3

Understanding display messages . 9.4

Solving other problems . 9.4

10. Specifications

General specifications . 10.1

Scanner and copier specifications . 10.1

Printer specifications . 10.2

5


Important Precautions and Safety Information

When using this machine, these basic safety precautions should always be

followed to reduce risk of fire, electric shock and injury to people:

1. Read and understand all instructions.

2. Use common sense whenever operating electrical appliances.

3. Follow all warnings and instructions marked on the machine and in the

literature accompanying the machine.

4, scx-4200 internal error - false. If an operating instruction appears to conflict with safety information,

heed the safety information. You may have misunderstood the operating

instruction. If you cannot resolve the conflict, contact your sales or

service representative for assistance.

5. Unplug the machine from the AC wall socket and/or telephone jack

before cleaning. Do not use liquid or aerosol cleaners. Use only a damp

cloth for cleaning.

6. Do not place the machine on an unstable cart, stand or table. It may fall,

causing serious damage.

7, scx-4200 internal error - false. Your machine should never be placed on, scx-4200 internal error - false, near or over a radiator, heater,

air conditioner or ventilation duct.

8. Do not allow anything to rest on the power. Do not locate your machine

where the cords will be abused by persons walking on them.

9. Do not overload wall outlets and extension cords. This can diminish

performance, and may result in the risk of fire or electric shock.

15. Adjust only those controls covered by the operating instructions.

Improper adjustment of other controls may result in damage, and may

require extensive work by a qualified service scx-4200 internal error - false to restore the

machine to normal operation.

16. Avoid using this machine during a lightning storm. There may be a

remote risk of electric shock from lightning. If possible, unplug the AC

power and telephone cord for the duration of the lightning storm.

17. SAVE THESE INSTRUCTIONS.

18. Use only No.26 AWG or larger telephone line cord.

Laser Safety Statement

The printer is certified in the U.S. to conform to the requirements of DHHS

21 CFR, chapter 1 Subchapter J for Class I(1) laser products, and elsewhere

is certified as a Class I laser product conforming to the requirements of IEC

825.

Class I laser products are not considered to be hazardous. The laser system

and printer are designed so there is never any human access to laser

radiation above a Class I level during normal operation, user maintenance or

prescribed service condition.

WARNING

Never operate or service the printer with the protective cover removed from

Laser/Scanner assembly. The reflected beam, although invisible, can

damage your eyes.

10. Do not allow pets to chew on the AC power, telephone or PC interface

cords.

11. Never push objects of any kind into the machine through case or cabinet

openings. They may touch dangerous voltage points, creating a risk of

fire or shock. Never spill liquid of any kind onto or into the machine.

12. Your machine may have a heavy cover for optimal pressure on the

document for the best scanning and/or faxing (usually the flatbed-type

machine). In this case, replace the cover after placing document on the

scan glass, by holding and moving it down slowly until it seats on its

location.

13. To reduce the risk of electric shock, do not disassemble the machine.

Take it to a qualified service technician when repair work is required.

Opening or removing covers may expose you to dangerous voltages or

other risks. Incorrect reassembly could cause electric shock when the

unit is subsequently used.

14. Unplug the machine from the telephone jack, PC and AC wall outlet and

refer servicing to qualified service personnel under the following

conditions:

•When any part of the power cord, plug or connecting cable is damaged

or frayed.

•If liquid has been spilled into the machine.

•If the machine has been exposed to rain or water.

•If the machine does not operate properly after instructions have been

followed.

•If the machine has been dropped, or the cabinet appears damaged.

•If the machine exhibits a sudden and distinct change in performance.

Ozone Safety

During normal operation, this machine produces ozone.

The ozone produced does not present a hazard to the

operator. However, it is advisable that the machine be

operated in a well ventilated area.

If you need additional information about ozone, please

request your nearest Samsung dealer.

6


Power Saver

This printer contains advanced energy conservation technology that reduces

power consumption when it is not in active use.

When the printer does not receive data for an extended period of time, power

consumption is automatically lowered.

Recycling

Please recycle or dispose of the packaging material for this

product in an environmentally responsible manner.

Correct Disposal of This Product (Waste

Electrical & Electronic Equipment)

•Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

•Consult the dealer or experienced radio TV technician for help.

CAUTION: Change or modifications not expressly approved by the

manufacturer responsible for compliance could void the user's authority to

operate the equipment.

Canadian Radio Interference Regulations

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus as set out in the interference-causing

equipment standard entitled “Digital Apparatus”, ICES-003 of the Industry

and Science Canada.

Cet appareil numérique respecte les limites de bruits radioélectriques

applicables aux appareils numériques de Classe B prescrites dans la norme

sur le matériel brouilleur: “Appareils Numériques”, ICES-003 édictée par

l’Industrie et Sciences Canada.

(Applicable in the European Union and other European

countries with separate collection systems)

This marking shown on the product or its literature, indicates

that it should not be disposed with other household wastes

at the end of its working life. To prevent possible harm to

the environment or human health from uncontrolled waste

disposal, please separate this from other types of wastes and

recycle it responsibly to promote the sustainable reuse of

material resources.

Household users should contact either the retailer where they purchased this

product, or their local government office, for details of where and how they

can take this item for environmentally safe recycling.

Business users should contact their supplier and check the terms and

conditions of the purchase contract. This product should not be mixed with

other commercial wastes for disposal.

Radio Frequency Emissions

FCC Information to the User

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

•This device may not cause harmful interference, and

•This device must accept any interference received, including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, scx-4200 internal error - false, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

7

Fax Branding

The Telephone Consumer Protection Act of 1991 makes it unlawful for any

person to use a computer or other electronic device to send any message via

a telephone facsimile machine unless such message clearly contains in a

margin at the top or bottom of each transmitted page or on the first page of

the transmission the following information:

(1) the date and time of transmission

(2) identification of either business, business entity or individual sending the

message; and

(3) telephone number of either the sending machine, business, business

entity or individual.

The Telephone Company may make changes in its communications facilities,

equipment operations or procedures where such action is reasonably

required in the operation of its business and is not inconsistent with the rules

and regulations in FCC Part 68. If such changes can be reasonably expected

to render any customer terminal equipment incompatible with telephone

company communications facilities, or require modification or alteration of

such terminal equipment, or otherwise materially affect its use or

performance, the customer shall be given adequate notice in writing, to allow

the customer an opportunity to maintain uninterrupted service.

Ringer Equivalence Number

The Ringer Equivalence Number and FCC Registration Number for this

machine may be found on the label located on the bottom or rear of the

machine. In some instances you may need to provide these numbers to the

telephone company.

The Ringer Equivalence Number (REN) is a measure of the electrical load

placed on the telephone line, and is useful for determining whether you have

“overloaded” the line. Installing several types of equipment on the same

telephone line may result in problems making and receiving telephone calls,

especially ringing when your line is called. The sum of all Ringer Equivalence

Numbers of the equipment on your telephone line should be less than five in

order to assure proper service from the telephone company. In some cases,

a sum of five may not be usable on your line. If any of your telephone

equipment is not operating properly, you should immediately remove it from

your telephone line, as it may cause harm to the telephone network.


WARNING:

FCC Regulations state that changes or modifications to this equipment not

expressly approved by the manufacturer could void the user’s authority to

operate this equipment. In the event that terminal equipment causes harm

to the telephone network, the telephone company should notify the customer

that service may be stopped. However, scx-4200 internal error - false, where prior notice is impractical, the

company may temporarily cease service, providing that they:

a) promptly notify the customer.

b) give the customer an opportunity to correct the equipment problem.

c) inform the customer of the right to bring a complaint to the Federal

Communication Commission pursuant to procedures set out in FCC Rules and

Regulations Subpart E of Part 68.

You should also know that:

• Your machine is not designed to be connected to a digital PBX system.

• If you intend to use a computer modem or fax modem on the same phone

line as your machine, you may experience transmission and reception

problems with all the equipment. It is recommended that no other

equipment, except for a regular telephone, share the line with your

machine.

• If your area experiences a high incidence of lightning or scx-4200 internal error - false surges, scx-4200 internal error - false, we

recommend that you install surge protectors for both the power and the

telephone lines. Surge protectors can be purchased from your dealer or

telephone and electronic specialty stores.

• When programming emergency numbers and/or making test calls to

emergency numbers, scx-4200 internal error - false, use a non-emergency number to advise the

emergency service dispatcher of your intentions. The dispatcher will give

you further instructions on how to actually test the emergency number.

• This machine may not be used on coin service or party lines.

• This machine provides magnetic coupling to hearing aids.

• You may safely connect this equipment to the telephone network by

means of a standard modular jack, USOC RJ-11C.

Declaration of Conformity (European

Countries)

Approvals and Certifications

The CE marking applied to this product symbolizes Samsung

Electronics Co., Ltd. Declaration of Conformity with the

following applicable 93/68/EEC Directives of the European

Union as of the dates indicated:

The declaration of conformity may be consulted at

www.samsung.com/printer, go to Support > Download center and enter your

printer name to browse the EuDoC.

January 1, 1995: Council Directive 73/23/EEC Approximation of the laws

of the member states related to low voltage equipment.

January 1, 1996: Council Directive 89/336/EEC (92/31/EEC),

approximation of the laws of the Member States related to electromagnetic

compatibility.

March 9, 1999: Council Directive 1999/5/EC on radio equipment and

telecommunications terminal equipment and the mutual recognition of their

conformity.

8

A full declaration, defining the relevant Directives and referenced standards

can be obtained from your Samsung Electronics Co., Ltd. representative.

EC Certification

Certification to 1999/5/EC Radio Equipment &

Telecommunications Terminal Equipment Directive (FAX)

This Samsung product has been self-certified by Samsung for pan-European

single terminal connection to the analogue public switched telephone

network (PSTN) in accordance with Directive 1999/5/EC. The product has

been designed to work with the national PSTNs and compatible PBXs of the

European countries:

In the event of problems, you should contact the Euro QA Lab of Samsung

Electronics Co., Ltd. in the first instance.

The product has been tested against TBR21. To assist in the use and

application of terminal equipment which complies with this standard, the

European Telecommunication Standards Institute (ETSI) has issued an

advisory document (EG 201 121) which contains notes and additional

requirements to ensure network compatibility of TBR21 terminals. The

product has been designed against, and is fully compliant with, all of the

relevant advisory notes contained in this document.

Replacing the Fitted Plug (for UK Only)

IMPORTANT

The mains lead for this machine is fitted with a standard (BS 1363) 13 amp

plug and has a 13 amp fuse. When you change or examine the fuse, you

must re-fit the correct 13 amp fuse. You then need to replace the fuse cover.

If you have lost the fuse cover, do not use the plug until you have another

fuse cover.

Please contact the people from you purchased the machine.

The 13 amp plug is the most widely used type in the UK and should be

suitable. However, some buildings (mainly old ones) do not have normal 13

amp plug sockets. You need to buy a suitable plug adaptor. Do not remove

the moulded plug.

WARNING

If you cut off the moulded plug, get rid of it straight away.

You cannot rewire the plug and you may receive an electric

shock if you plug it into a socket.

IMPORTANT WARNING: You must earth this machine.

The wires in the mains lead have the following color code:

• Green and Yellow: Earth

•Blue: Neutral

•Brown: Live

If the wires in the mains lead do not match the colors marked in your plug,

do the following:

You must connect the green and yellow wire to the pin marked by the letter

“E” or by the slax boot error ‘Earth symbol’ or colored green and yellow or green.

You must connect the blue wire to the pin which is marked with the letter “N”

or colored black.


You must connect the brown wire to the pin which is marked with the letter

“L” or colored red.

You must have a 13 amp fuse in the plug, adaptor, or at the distribution

board.

9


1 Introduction

Thank you for purchasing this Samsung multifunctional

product. Your machine provides printing, copying, and scanning

functions!

This chapter includes:

• Special features

• Understanding component locations

Special features

Your new machine is equipped with special features that

improve the print quality. You can:

Save time and money

• You can print multiple pages on one single sheet of paper to

save paper.

• You can use preprinted forms and letterhead on plain paper.

See the Software Section

• This machine automatically conserves electricity by

substantially reducing power consumption when not

printing.

Print in various environments

• You can print with various operating system such as

Windows, scx-4200 internal error - false, Linux and Macintosh systems.

• Your machine comes with the USB interface.

Print with excellent quality and speed

• You can print up to 600 dpi X 600 dpi. See the Software

Section.

• Your machine prints A4-sized paper at up to 18 ppm a and

letter-sized paper at up to 19 ppm.

Handle paper flexibly

•The manual feeder supports plain paper, letterhead,

envelope, label, transparency, custom-sized material,

postcard, and heavy paper.

•The paper input tray supports 250 sheets of A4/lettersized

paper.

Create professional documents

•Print Watermarks. You can customize your documents with

words, scx-4200 internal error - false, such as “Confidential.” See the Software Section.

•Print Posters. The text and pictures of each page of your

document are magnified and printed across the sheet of

paper and taped together to form a poster. See the

Software Section.

a. page per minute

1.1

Introduction


Understanding component

locations

These are the main components of your machine:

Rear view

Front view

1 rear cover 3 power receptacle

2 USB port 4 power switch

1 document cover 6 manual feeder guides

2 document glass 7 paper input tray

3 control panel 8 manual feeder

4 front cover 9 output tray

5 toner cartridge 10 scan unit

1.2

Introduction


Control panel functions

SCX-4200/ SCX-4200R

1 Displays the current status and prompts during an operation.

2 Status- Shows the status of your machine. See page 9.3.

3 Menu- Enters Menu mode and scrolls through the available menus.

4 Scroll through the options available in the selected menu.

5 OK- Confirms the selection on the display.

6 Back- Sends you back to the upper menu level.

7 Copies- Allows you to enter the number of copies.

8

Stop/Clear- Stops an operation at any time.

In Standby mode, clears/cancels the copy options, such as the resolution, the document type setting, scx-4200 internal error - false copy size, and the number of copies.

9 Start- Starts a job.

1.3

Introduction


2 Getting started

This chapter gives you step-by-step instructions for setting up

your machine.

This chapter includes:

Setting up your machine

• Selecting a location

• Installing the toner cartridge

• Loading paper

• Making connections

• Turning the machine on

Setting up your machine

Finding more information

You can find information for setting up and using your machine

from the following resources, either printed or onscreen.

Quick Install

Guide

Provides information on setting up your

machine and, therefore, be sure to follow

the instructions in the guide to get the

machine ready.

Setting up the machine system

• Overview of control panel menus

• Changing the display language

• Using the save modes

Printer software overview

• Supplied printer software

• Printer driver features

• System requirements

Online User’s

Guide

Printer Driver Help

Provides you with step-by-step

instructions for using your machine’s full

features, and contains information for

maintaining your machine,

troubleshooting, and installing

accessories.

This user’s guide also contains the

Software Section providing you with

information on how to print documents

with your machine on various operating

systems, and how to use the supplied

software utilities.

NOTE: You can access the user’s guides

in other languages from the Manual

folder on the printer driver CD.

Provides you with help information on

printer driver properties and instructions

for setting up the properties for printing.

To access a printer driver help screen,

click Help from the printer properties

dialog box.

Samsung website

If you have Internet access, you can get

help, support, printer drivers, manuals,

and order information from the Samsung

website, www.samsungprinter.com.

2.1

Getting started


Selecting a location

Select a level, stable place with adequate space for air

circulation. Allow extra space for opening covers and trays.

The area should be well-ventilated and away from direct

sunlight or sources of heat, cold, and humidity. Do not set the

machine close to the edge of your desk or table.

Clearance space

• Front: 482.6 mm (enough space so that the paper tray can

be removed)

• Back: 100 mm (enough space for ventilation)

• Right: 100 mm (enough space for ventilation)

• Left: 100 mm (enough space for ventilation)

Installing the toner cartridge

1 Open the front cover.

2 Remove the toner cartridge from its bag, scx-4200 internal error - false. Do not use a

knife or other sharp object as it might scratch the drum of

the toner cartridge.

3 Roll the toner cartridge 5 or 6 times to distribute the toner

evenly inside the toner cartridge.

Thoroughly rolling the toner cartridge will assure

maximum copies per toner cartridge.

4 Remove the paper protecting the toner cartridge.

NOTE: If toner gets on your clothing, wipe it off with a dry

cloth and wash clothing in cold water. Hot water sets toner into

fabric.

2.2

Getting started


CAUTION:

• To prevent damage, do not expose the toner cartridge to

light for more than a few minutes. Cover it with a piece of

paper, if left exposed for more than a few minutes.

• Do not touch the green underside of the toner cartridge. Use

the handle on the toner cartridge to avoid touching this area.

Loading paper

The paper input tray can hold a maximum of 250 sheets of 20

lb (75 g/m 2 ) plain paper.

1 Pull open the paper input tray and remove it from the

machine.

5 Hold the toner cartridge by the handle. Slowly insert the

toner cartridge into the opening in the machine.

6 Tabs on the sides of the toner cartridge and corresponding

grooves within the machine will guide the toner scx-4200 internal error - false the correct position until it locks into place completely.

2 Fan the edges of the paper stack to separate the pages.

Then tap the stack on a flat surface to even it up.

1 Groove

2 Tab

7 Close the front cover. Make sure that the front cover is

securely closed.

3 Insert the paper stack into the paper input tray with the

side to be printed on facing down.

NOTE: If you want to load a different sized paper, you need to

adjust the paper guides, scx-4200 internal error - false. For details, see page 2.4.

NOTE: When printing text at 5% coverage, you can expect a

toner cartridge life of approximately 3,000 pages. (1,000

pages for the toner cartridge that is shipped with the

machine.)

2.3

Getting started


4 Pay attention to the paper limit mark on both inside walls

of the paper input tray. Paper overloading may cause

paper jams.

Changing the size of the paper in the paper

input tray

To load longer sizes of paper, such as Legal-sized paper, you

need to adjust the paper guides to extend the paper input tray.

1 After pressing and unlatching the guide lock, slide the

paper length guide out completely to extend the paper

input tray to its full length.

5 Insert and slide the paper input tray back into the

machine.

2 After inserting paper into the paper input tray, squeeze the

front paper length guide and slide it until it lightly touches

the end of the paper stack.

NOTE: After you load paper, you need to set up your machine

for the paper type and size you loaded. See page 3.6 for

copying, or the Software Section for PC-printing. The

settings made from the printer driver override the settings on

the control panel.

For paper smaller than Letter size, adjust the front paper

length guide so that it lightly touches the paper stack.

2.4

Getting started


3 Squeeze the paper width guide, as shown and slide it to

the stack of paper until it lightly touches the side of the

stack.

NOTE: When using the USB connection, your machine

provides two USB modes; Fast and Slow. Fast is the default

mode. Some PC users may experience poor USB function in

the default mode. If this occurs, select Slow mode to achieve

successful results. For scx-4200 internal error - false about changing the USB mode,

see page 9.7.

NOTES:

• Do not push the paper width guide far enough to cause the

materials to warp.

• If you do not adjust the paper width guide, it may cause

paper jams.

Turning the machine on

1 Plug one end of the supplied power cord into the power

receptacle on the machine and the other end into error boot bcd win7 grounded AC outlet.

2 Press the power switch to turn the machine on. warming

up please wait appears on the display indicating that the

machine is now on.

Making connections

1 Connect a USB cable to the USB connector on your

machine. You need to buy a USB 2.0 compliant cable that

is not longer than 3 m.

To view your display text in another language, see

page 2.6.

CAUTION:

• The fuser area inside of the rear cover of your machine

becomes very hot when in use. Take care not to burn your

fingers when you access this area.

• Do not disassemble the machine with power on. If you do,

you may receive an electric shock.

To the USB port on your computer

2 Connect the other end of the cable to the USB port on your

computer.

See your computer User’s Guide if you need help.

2.5

Getting started


Setting up the machine system

Overview of control panel menus

The control panel provides access to various menus to set up

the machine or use the machine’s functions. Scx-4200 internal error - false can be

accessed by pressing Menu.

Refer to the following diagram.

Reduce/Enlarge

Changing the display language

To change the language that appears on the control panel,

follow these steps:

1 Press Menu until Machine Setup appears on the top line

of the display.

2 Press OK when Language appears.

3 Press the scroll button ( or ) to select the language you

want and press OK.

4 Press Stop/Clear to return to Standby mode.

Darkness

Original Type

Special Copy

Toner Save

Paper Setting

Copy Setup

Report

Machine Setup

Maintenance

Off

Clone

Auto Fit

ID Card Copy

2 UP

Poster

Paper Size

Paper Type

Default-Change

Timeout

Language

Power Save

USB mode

Clean Drum

Clear Settings

Using the save modes

Toner save mode

Toner save mode allows your machine to warfare fetal error less toner on each

page. Activating this mode extends the life of the toner

cartridge beyond what one would experience in the normal

mode, but it reduces print quality.

1 Press Menu until Toner Save appears on the top line of

the display.

2 Press the scroll button ( or ) until On appears and press

OK.

NOTE: When PC-printing, you can also turn on or off Toner

Save mode in the printer properties. See the Software

Section.

Power save mode

Power save mode allows your machine to reduce power

consumption when it is not in actual use. You can turn this

mode on and select a length of time for which the machine

waits after a job is printed before it switches to a reduced power

state.

1 Press Menu until Machine Setup appears on the top line

of the display.

2 Press the scroll button ( or ) until Power Save appears

and press OK.

3 Press the scroll button ( or ) until On appears and press

OK.

4 Press the scroll button ( or ) to select the time setting

you want and press OK.

5 Press Stop/Clear to return to Standby mode.

2.6

Getting started


Printer software overview

Supplied printer software

After you have set up your machine and connected it to your

computer, you must install the printer software. If you are a

Windows or Macintosh OS, install the software from the

supplied CD and if you are a Linux OS user, download the

software from the Samsung website (www.samsung.com/

printer) and install. Adsl + superframe error details, see the Software Section. :

Programs for windows

To use your machine as a printer and scanner in Windows, you

must install the MFP driver. You can install selectively or all the

following components:

• Printer driver- Use this driver to take full advantage of

your printer’s features.

• Scanner driver- TWAIN and Windows Image Acquisition

(WIA) driver are available for scanning documents on your

machine.

• Smart Panel- This program allows you to monitor the

machine’s status and alerts you when an error occurs during

printing.

• SmarThru- This is the accompanying Windows-based

software for your multifunctional machine, scx-4200 internal error - false. Allows you to edit

a scanned image in many ways using a powerful image

editor and to send the image by email. You can also open

another image editor program installed in your Windows,

like Adobe PhotoShop, from SmarThru.

For details, please refer to the onscreen help supplied on the

SmarThru program.

Printer driver features

Your printer drivers support the following standard features:

• Paper source selection

• Paper size, orientation and media type

•Number of copies

The following table lists a general overview of features

supported by your printer drivers.

Feature

Printer Driver

Windows Macintosh Linux

Toner save Y N Y

Print quality option Y Y Y

Poster printing Y N N

Multiple pages

per sheet (N-up)

Y Y Y(2,4)

Fit to page printing Y N Y

Scale printing Y Y Y

Watermark Y N N

Overlay Y N N

TrueType fonts option Y N N

Linux driver

You can print and scan in Linux using your machine. For

information about installing the MFP driver in Linux, see the

Software Section.

Macintosh printer driver

You can print and scan in Macintosh using your machine. For

information about installing the printer driver in Macintosh, see

the Software Section.

2.7

Getting started


System requirements

Before you begin, scx-4200 internal error - false, ensure that your system meets the minimum

requirements.

Windows

Your machine supports the following Windows operating systems.

Operating

System

Windows

2000

Windows

XP

Windows

2003

Server

Requirement (recommended)

CPU

Pentium II 400 MHz

(Pentium III 933 MHz)

Pentium III 933 MHz

(Pentium IV 1 GHz)

Pentium III 933 MHz

(Pentium IV 1 GHz)

RAM

64 MB

(128 MB)

128 MB

(256 MB)

128 MB

(512 MB)

free HDD

space

600 MB

1.5 GB

1.25 GB to

2 GB

Macintosh

Operating

System

Mac OS X

10.4 or

lower

Mac OS X

10.5

Mac OS X

10.6

Linux

CPU

• Intel

Processor

• Power PC

G4 / G5

• Intel

Processor

• 867 MHz

or faster

Power PC

G4 / G5

• Intel

Processor

Requirement (recommended)

RAM

• 128 MB for a Power-PC

based Mac (512 MB)

• 512 MB for an Intelbased

Mac (1 GB)

free HDD

space

1 GB

512 MB (1 GB) 1 GB

1 GB (2 GB) 1 GB

Windows

2008

Server

Pentium IV 1 GHz

(Pentium IV 2 GHz)

512 MB

(2048 MB)

10 GB

Item

Operating system

Requirements (Recommended)

RedHat 8.0, 9.0 (32 bit)

Windows

Vista

Windows 7

Pentium IV 3 GHz

Pentium IV 1 GHz 32-bit

or 64-bit processor or

higher

512 MB

(1024 MB)

1 GB

(2 GB)

15 GB

16 GB

• Support for DirectX 9 graphics with 128 MB

memory(to enable the Aero theme).

•DVD-R/W Drive

RedHat Enterprise Linux WS 4, 5 (32/64 bit)

Fedora Core 1~7 (32/64 bit)

Mandrake 9.2 (32 bit), 10.0, 10.1 (32/64 bit)

Mandriva 2005, 2006, 2007 (32/64 bit)

SuSE Linux 8.2, 9.0, 9.1 (32 bit)

SuSE Linux 9.2, 9.3, 10.0, 10.1, 10.2 (32/

64 bit)

SuSE Linux Enterprise Desktop 9, 10 (32/

64 bit)

Windows

Server

2008 R2

Pentium IV 1 GHz(x86)

or 1.4GHz(x64)

processors(2GHz or

faster)

512 MB

(2048MB)

10 GB

CPU

Ubuntu 6.06, 6.10, 7.04 (32/64 bit)

Debian 3.1, scx-4200 internal error - false, 4.0 (32/64 bit)

Pentium IV 2.4 GHz (IntelCore2)

NOTE:

• Internet Explorer 5.0 or higher is the minimum requirement

for all Windows operating systems.

Users who have an administrator right can install the

software.

RAM

free HDD space

Software

512 MB (1024 MB)

1 GB (1 GB)

Linux Kernel 2.4 or higher

Glibc 2.2 or higher

CUPS

2.8

Getting started


3 Loading original

documents and paper

2 Place the document face down on the document glass

and align it with the registration guide at the top left

corner of the glass.

This chapter introduces you to how to load documents and print

materials into your machine.

This chapter includes:

• Loading document

• Selecting print materials

• Loading paper

• Setting the paper size and type

• Selecting an output location

Loading document

You can use the document glass to load an original document

for copying and scanning.

1 Lift and open the document cover.

3 Close the document cover. Be careful not to move the

document.

NOTES:

• Leaving the document cover open while copying may affect

copy quality and toner consumption.

• Dust on the document glass may cause black spots on the

printout. Always keep it clean.

• If you are copying a page from a book or magazine, lift the

document cover until its hinges are caught by the stopper

and then close the cover. If the book or magazine is thicker

than 30 mm, start copying with the cover open.

3.1

Loading original documents and paper


Selecting print materials

You can print on a variety of print materials, such as plain

paper, envelopes, labels, and transparencies. Always use print

materials that meet the guidelines for use with your machine.

Paper that does not meet the guidelines outlined in this user’s

guide may cause the following problems:

• Poor print quality

• Increased paper jams

•Premature wear on the machine.

Properties, such as weight, composition, grain, and moisture

content, are important factors that affect the machine’s

performance and the output quality. When you choose print

materials, consider the following:

• Desired outcome: The paper you choose should be

appropriate for your project.

• Size: You can use any size paper that fits easily within the

paper adjusters of the paper input tray.

• Weight: Your machine supports paper weights as follows:

- 16 to 24 lb (60 to 90 g/m 2 ) bond for the paper input tray

- 16 to 43 lb (60 to 165 g/m 2 ) bond for the manual feeder.

• Brightness: Some papers are whiter than others and

produce sharper, more vibrant images.

• Surface smoothness: The smoothness of the paper affects

how crisp the printing looks on the paper.

NOTES:

• Some paper may meet all of the guidelines in this section

and still not produce satisfactory results. This may be the

result of improper handling, unacceptable temperature and

humidity levels, or other variables over which Samsung has

no control.

• Before purchasing large quantities of paper, ensure that the

paper meets the requirements specified in this user’s guide.

Supported paper types and sizes

Type Size Dimensions Weight a Capacity b

Plain paper Letter 215.9 x 279 mm

(8.5 x 11 inches)

Legal 215.9 x 355.6

mm (8.5 x 14

inches)

Folio

A4

Oficio

JIS B5

ISO B5

216 x 330.2 mm

(8.5 x 13 inches)

210 x 297 mm

(8.27 x 11.69

inches)

216 x 343 mm

(8.5 x 13.5

inches)

182 x 257 mm

(7.18 x 10.12

inches)

176 x 250 mm

(6.93 x 9.84

inches)

Executive 184.2 x 266.7

mm (7.25 x 10.5

inches)

A5

A6

148.5 x 210 mm

(5.85 x 8.27

inches)

105 x 148.5 mm

(4.13 x 5.85

inches)

• 60 to 90

g/m 2 (16

to 24 lb

bond) for

the paper

input tray

• 60 to 165

g/m 2 (16

to 43 lb

bond) for

the

manual

feeder

• 250

sheets of

75 g/m 2

(20 lb

bond)

paper for

the paper

input tray

• 1 sheet of

paper for

the

manual

feeder

CAUTION: Using paper that does not meet these specifications

may cause problems, requiring repairs. Such repairs are not

covered by the Samsung warranty or service agreements.

Envelope Envelope B5 176 x 250 mm

(6.92 x 9.48

inches)

Envelope

Monarch

98.4 x 190.5 mm

(3.88 x 7.5

inches)

60 to 90

g/m 2 (16 to

24 lb)

1 sheet of

paper for

the manual

feeder

Envelope

COM-10

Envelope DL

Envelope C5

105 x 241 mm

(4.12 x 9.5

inches)

110 x 220 mm

(4.33 x 8.66

inches)

162 x 229 mm

(6.38 x 9.02

inches)

3.2

Loading original documents and paper


Envelope

(continued)

Envelope C6

114 x 162 mm

(4.48 x 6.37

inches)

Transparency Letter, A4 Refer to the Plain

paper section

Labels

Type Size Dimensions Weight a Capacity b

Card stock

Letter, Legal,

Folio, A4, scx-4200 internal error - false, JIS

B5, ISO B5,

Executive,

A5, A6

Letter, Legal,

Folio, A4, JIS

B5, ISO B5,

Executive,

A5, A6

Minimum size (custom)

Maximum size (custom)

Refer to the Plain

paper section

Refer to the Plain

paper section

76 x 127 mm

(3.0 x 5.0 inches)

215.9 x 356 mm

(8.5 x 14 inches)

60 to 90

g/m 2 (16 to

24 lb)

138 to 148

g/m 2

120 to 150

g/m 2 (32 to

40 lb)

60 to 165

g/m 2 (16 to

43 lb)

60 to 165

g/m 2 (16 to

43 lb bond)

Paper size supported in each mode

1 sheet of

paper for

the manual

feeder

1 sheet of

paper for

the manual

feeder

1 sheet of

paper for

the manual

feeder

1 sheet of

paper for

the manual

feeder

1 sheet of

paper for

the manual

feeder

a If paper weight is over 90 g/m 2load one sheet of paper in the manual feeder.

b Maximum capacity may differ depending on media weight, thickness, scx-4200 internal error - false, and

environmental conditions.

Copy mode

Mode Size Source

Letter, A4, Legal, Folio,

Executive, ISO B5, JIS

B5, A5, A6

• paper input tray

• manual feeder

Guidelines for selecting and storing

print materials

When selecting or loading paper, envelopes, or other print

materials, keep these guidelines in mind:

• Always use paper and other materials that conform with the

specifications listed on page 3.2.

• Attempting to print on damp, curled, wrinkled, scx-4200 internal error - false, or torn paper

can cause paper jams and poor print quality.

• For the best print quality, use only high quality copier grade

paper specifically recommended for use in laser printers.

• Avoid using the following paper types:

- Paper with embossed lettering, perforations, or a texture

that is too smooth or too rough

- Erasable bond paper

- Multi-paged paper

- Synthetic paper and thermally reactive paper

- Carbonless paper and Tracing paper.

• Use of these types of paper could result in paper jams,

chemical smells, and damage to your machine.

• Store paper in its ream wrapper until you are ready to use it.

Place cartons on pallets or shelves, not on scx-4200 internal error - false floor. Do not

place heavy objects on top of the paper, whether it is

packaged or unpackaged. Keep it away from moisture or

other conditions that can cause it to wrinkle or curl.

• Store unused materials at temperatures between 15 o C and

30 o C (59 o F to 86 o F). The relative humidity should be

between 10% and 70%.

• Store unused paper in a moisture-proof wrap, scx-4200 internal error - false as a

plastic container or bag, to prevent dust and moisture from

contaminating your paper.

• Load special paper types one sheet at a time through the

manual feeder to avoid paper jams.

• To prevent materials such as transparencies and label sheets

from sticking together, remove them as they print out.

Single side printing

All sizes supported by the

machine

• paper input tray

• manual feeder

3.3

Loading original documents and paper


Guidelines for special materials

Paper Type

Guidelines

Paper Type

Envelopes

Guidelines

• Successful printing on envelopes depends upon the

quality of the envelopes. When selecting envelopes,

consider the following factors:

- Weight: The weight of the envelope paper should

not exceed 90 g/m 2 (24 lb) or jamming may

occur.

- Construction: Prior to printing, envelopes should

lie flat with less than 6 mm (0.25 inches) curl, scx-4200 internal error - false, and

should not contain air.

- Condition: Envelopes should not be wrinkled,

nicked, scx-4200 internal error - false, or otherwise damaged.

- Temperature: You should use envelopes that are

compatible with the heat and pressure of the

machine during operation.

• Use only well-constructed envelopes with sharp and

well creased folds.

• Do not use scx-4200 internal error - false envelopes.

• Do not use envelopes with clasps, snaps, windows,

coated lining, self-adhesive seals, or other synthetic

materials.

• Do not use damaged or poorly made envelopes.

• Be sure the seam at both ends of the envelope

extends all the way to the corner of the envelope.

Acceptable

Unacceptable

• Envelopes with a peel-off adhesive strip or with

more than one flap that folds over to seal must use

adhesives compatible with the machine’s fusing

temperature of 208° C (406.4° F) for 0.1 second.

The extra flaps and strips might cause wrinkling,

creasing, or jams, and may even damage the fuser.

• For the best print quality, position margins no closer

than 15 mm (0.6 inches) from the edges of the

envelope.

• Avoid printing over the area where the envelope’s

seams meet.

Transparencies

Labels

Card stock or

custom-sized

materials

• To avoid damaging the machine, use only

transparencies designed for use in laser printers.

• Transparencies used in the machine scx-4200 internal error - false be able to

withstand 208° C (406.4° F), the machine’s fusing

temperature.

• Place them on a flat surface after removing them

from the machine.

• Do not leave them in the paper tray for long periods

of time. Dust and dirt may accumulate on them,

resulting in spotty printing.

• To avoid smudging caused by fingerprints, handle

them carefully.

• To avoid fading, scx-4200 internal error - false, do not expose printed

transparencies to prolonged sunlight.

• Ensure that transparencies are not wrinkled, curled,

or have any torn edges.

• To avoid damaging the machine, use only labels

designed for use in laser printers.

• When selecting labels, consider the following

factors:

- Adhesives: The adhesive material should be stable

at 208° C (406.4° F), the machine’s fusing

temperature.

- Arrangement: Only use labels with no exposed

backing between them. Labels can peel off sheets

that have spaces between the labels, causing

serious jams.

- Curl: Prior to printing, labels must lie flat with no

more than 13 mm (5 inches) of curl in any

direction.

- Condition: Do not use labels with wrinkles,

bubbles, or other indications of separation.

• Make sure that there is no exposed adhesive

material between labels. Exposed areas can cause

labels to peel off during printing, which can cause

paper jams. Exposed adhesive can also cause

damage wine error c000007b machine components.

• Do not run a sheet of labels through the machine

more than once. The adhesive backing is designed

for only a single pass through the machine.

• Do not use labels that are separating from the

backing sheet or are wrinkled, bubbled, or

otherwise damaged.

• Do not print on media smaller than 76 mm (3

inches) wide or 127 mm (5 inches) long.

• In the software application, set margins at least 6.4

mm (0.25 inches) away from the edges of the

material.

3.4

Loading scx-4200 internal error - false documents and paper


Paper Type Guidelines In the manual feeder

Preprinted paper

• Letterhead must be printed scx-4200 internal error - false heat-resistant ink

that will not melt, scx-4200 internal error - false, vaporize, or release hazardous

emissions when subjected to the machine’s fusing

temperature of 208° C (406.4° F) for 0.1 second.

• Letterhead ink must be non-flammable and should

not adversely affect printer rollers.

• Forms and letterhead should be sealed in a

moisture-proof wrapping to prevent changes during

storage.

• Before you load preprinted paper, such as forms and

letterhead, verify that the ink on the paper is dry.

During the fusing process, wet ink can come off

preprinted paper, reducing print quality.

Use the manual feeder to print transparencies, labels,

envelopes or postcards in addition to making quick runs of

paper types or sizes that are not currently loaded in the paper

input tray.

To load print material in the manual feeder:

1 Load a sheet of the print material with the side to be

printed on facing up into the center of the manual

feeder.

Loading paper

In the paper input tray

Load the print material you use for the majority of your print

jobs in the paper input tray. The paper input tray can hold a

maximum of 250 sheets of 20 lb (75 g/m 2 ) plain paper.

To load paper, pull open the paper input tray and load paper

with the side to be printed on face down.

You can load letterhead paper with the design side face down.

The top edge of the sheet with the logo should be placed at the

front of the paper input tray.

For details about loading paper in the tray, see page 2.3.

NOTES:

• If you experience problems with paper feed, place one sheet

at a time in the manual feeder.

• You can load previously printed paper. The printed side

should be facing up with an uncurled edge at the front. If

you experience problems with paper feed, turn the paper

around, scx-4200 internal error - false. Note that the print quality is not guaranteed.

Depending on the paper type you are using, keep the

following loading method:

• Envelopes: load a sheet with the flap side down and with

the stamp area on the top left side.

• Transparencies: load a sheet with the print side up and

the top with the adhesive strip entering the machine

first.

• Labels: load a sheet with the print size up and top short

edge entering the machine first.

• Preprinted paper: load a sheet with the design face up,

top edge toward the machine.

• Card: load a sheet with the print side up and the short

edge entering the machine first.

• Pre printed paper: load a sheet with the printed side

down and an uncurled edge toward the machine.

3.5

Loading original documents and paper


2 Adjust the manual feeder guides to the width of the print

material without bending it.

4 Press the scroll button ( or ) to find the paper size you

are using and press OK.

5 Press Back to return to the upper level.

6 Press the scroll button ( or ) to select Paper Type and

press OK.

7 Press the scroll button ( or ) to find the paper type you

are using and press OK.

8 Press Stop/Clear to return to Standby mode.

Selecting an output location

3 After loading paper, you need to set the paper type and

size for the manual feeder. See page 3.6 for copying or the

Software Section for PC-printing.

NOTE: The settings made from the printer driver override the

settings on the control panel.

4 If you want to use the rear cover, open the rear cover.

Tips on using the manual feeder

• Print materials should be loaded face up with the top edge

going into the manual feeder first and be placed in the

center of the tray.

• Always load only the print materials specified in the

Specifications on page 3.2 to avoid paper jams and print

quality problems.

• When you print on 76 x 127 mm (3 x 5 inches) sized media

on the manual feeder, open the rear cover to use the rear

cover.

• Make sure to open the rear cover when you print on

transparencies. If not, they may tear while exiting the

machine.

The machine has two output locations: the rear cover (face up)

and the output tray (face down).

To use the output tray, make sure that the rear cover is closed.

To use the rear cover, open the rear cover.

NOTES:

• If paper coming out of the output tray has problems, such as

excessive curl, try printing to the rear cover.

• To avoid paper jams, do not open or close the rear cover

while the machine is printing.

Printing to the output tray (Face down)

The output tray collects printed paper face down, in the order

in which the sheets were printed. The tray should be used for

most print jobs.

If you use paper which is not long enough to reach the output

tray, use the scan unit.

To use the scan unit:

1 Lift the scan unit. A tab automatically springs up to

support the cover.

Setting the paper size and type

After loading paper in the paper tray, you need to set the paper

size and type using the control panel buttons. These settings

will apply to Copy mode. For PC-printing, you need to select the

paper size and type in the application program you use on your

PC.

1 Press Menu until Paper Setting appears on the top line

of the display.

2 Press OK when Paper Size appears.

3 Press the scroll button ( or ) to select the paper tray

you want to use and press OK.

3.6

Loading original documents and paper


2 Take the paper out manually.

To use the rear cover, open the rear cover by pulling it up.

3 Close the scan unit. In order to close the cover, push the

tab to the left and hold it down. Then lower the cover

carefully until the cover is holding down the tab. Then you

can move your hand and finish lowering the cover.

Be careful not to pinch your fingers!

CAUTION: The fuser area inside the rear cover of your

machine becomes very hot when in use. Take care when you

access this area.

NOTES:

• If you continuously print many pages, the surface of the

output tray may become hot. Be careful not to touch the

surface, and especially keep children away from the surface.

• The output tray can hold up to 50 sheets of paper, scx-4200 internal error - false. Remove

the pages so that tray is not overloaded.

Printing to the rear cover (Face up)

Using the rear cover, paper comes out of the machine face up.

Printing from the manual feeder to the rear cover provides a

straight paper path. Using the rear cover might improve the

output quality with special materials.

3.7

Loading original documents and paper


4 Copying

This chapter gives you step-by-step instructions for copying

documents.

This chapter includes:

• Copying

• Changing the settings for each copy

• Using special copy features

• Changing the default settings

• Setting the time out option

Copying

1 Place a document on the document glass.

2 Customize the copy settings including copy size, darkness,

and original type, by using the control panel buttons. See

page 4.1.

If necessary, you can use special copy features, such as

Poster copying or 2 Up copying. See page 4.3.

3 Press Copies and enter the number of copies using the

scroll button ( or ), if necessary.

4 Press Start to begin copying.

The display shows the copy processing.

NOTE: You can cancel the copy job during an operation. Press

Stop/Clear, and the copying will stop.

Changing the settings for each

copy

The buttons on the control panel let you select all basic copy

options: darkness, document type and copy size. Set the

following options for the current copy job before pressing Start

to make copies.

NOTE: If you press Stop/Clear while setting the copy

options, all of the options you have set for the current copy job

will be canceled and returned to their default status.

4.1

Copying

Reduced/Enlarged copy

You can reduce or enlarge the size of a copied image from 50%

to 200% when you copy original documents from the document

glass.

To select from the predefined copy sizes:

1 Press Menu then Reduce/Enlarge appears.

2 Press the scroll button ( or ) to select the size setting

you want and press OK.

To fine-tune the size of copies:

1 Press Menu then Reduce/Enlarge appears.

2 Press the scroll button ( or ) until Custom:50-200%

appears and press OK.

3 Press the scroll button ( or ) to enter the copy size you

want. Pressing and holding the button allows you to

quickly scroll to the number you want.

4 Press OK to save the selection.

NOTE: When you make a reduced copy, black lines may

appear at scx-4200 internal error - false bottom of your copy.

Darkness

If you have an original document containing faint markings and

dark images, you can adjust the brightness to make a copy that

is easier to read.

1 Press Menu until Darkness appears on the top line of the

display.

2 Press the scroll button ( or ) to select the contrast mode

you want.

• Light: works well with dark print.

• Normal: works well with standard typed or printed

documents.

• Dark: works well with light print or faint pencil

markings.

3 Press OK to save the selection.

Original type

The original type setting is used to improve the copy scx-4200 internal error - false by

selecting the document scx-4200 internal error - false for the current copy job.

1 Press Menu until Original Type appears on the top line of

the display.

2 Press the scroll button ( or scx-4200 internal error - false to select the image mode

you want.

• Text: Use for documents containing mostly text.

• Text/Photo: Use for documents with mixed text and

photographs.

• Photo: Use when the originals are photographs.


3 Press OK to save the selection.

Changing the default settings

The copy options, including darkness, original type, copy size

and number of copies, can be set to the most frequently used

modes. When you copy a document, the default settings are

used unless they are changed by using the menus scx-4200 internal error - false the

control panel.

To create your own default settings:

1 Press Menu until Copy Setup appears on the top line of

the display.

2 Press OK when Default-Change appears.

3 Press the scroll button ( or ) to select a setup option

and press OK.

4 Press the scroll button ( or ) to change the setting or

enter the value and press OK.

5 Repeat steps 3 through 4, as needed.

6 Press Stop/Clear to return to Standby mode.

NOTE: While you are setting copy options, pressing Stop/

Clear cancels the changed settings and restores their default

status.

Using special copy features

Clone copying

This feature prints multiple image copies from the original

document on a single page. The number of images is

automatically determined by the original image and paper size.

1 Place the document to be copied on the document glass,

and close the cover.

0 Comments

Leave a Comment