Read_dma udma icrc error

read_dma udma icrc error

Hey alll, My computer have been running fine for the last month, but then it started to get this error, and now it comes up with this error: ad0. [209.780512] ata4.00: error {ICRC ABRT} Strangely on a reboot it booted all the way to my samba shares being active and I can also SSH in. SMART Error Log Version: 1 ATA Error Count: 545 (device log 00 00 00 40 00 00:22:51.061 READ DMA EXT Error 543 occurred at disk power-on.

You the: Read_dma udma icrc error

Read_dma udma icrc error
10061 SOCKET ERROR
Cant install driver - error 1275
ERROR INITIALIZING OPERA MODULE 11
Read_dma udma icrc error

READ_DMA Error

Hi all, During FreeBSD 6.2 installation, the process failed because of errors like the one below: READ_DMA UDMA ., read_dma udma icrc error. ICRC error LBA=37505132 I managed to read_dma udma icrc error by setting hw.ata.ata_dma=0 at boot time but the same errors occur after installation and at boot time so Read_dma udma icrc error had to put hw.ata.ata_dma=0 in loader.conf and now the system is working. I checked my hard disk which a 80GB Western Digital+ thoroughly and there were no errors reported (using fsck in single user mode), read_dma udma icrc error. Also I used to install Fedora Linux on this disk without any problems. It looks that disabling DMA caused my disk to work with lower performance, read_dma udma icrc error. Am I right? If yes, are there any solutions to eliminate those READ_DMA errors while DMA is enabled? Thanks in advance, Bahman PS: Motherboard: ASUS A7V8X-X CPU: Athlon XP 2500 at 1833MHz $ uname -ai FreeBSD attila 6.2-RELEASE FreeBSD 6.2-RELEASE #0: Fri Jan 12 10:40:27 UTC 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 GENERIC _______________________________________________ [email protected] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"

firefist235

Anmeldungsdatum:
20. Juli 2009

Beiträge: 68

Hallo zusammen Ich nutze in meinem Server (Version 13.04) einen HBA von Exsys mit 8 SATA Ports (genaue Bezeichnung weiß ich leider nicht mehr) welche alle mit 3TB Platten im RAID5-Verbund belegt sind, read_dma udma icrc error. Gestern habe ich vom Server eine eMail bekommen, dass eine Festplatte ausgefallen ist und mein RAID deshalb auf Status degraded läuft. Die Festplatte an sich scheint aber noch zu funktionieren, read_dma udma icrc error, deshalb habe ich sie aus dem RAID entfernt und wieder hinzugefügt, recovering läuft. Soweit, so gut.

Im Screenshot kann man erkennen, read_dma udma icrc error, dass die ersten 4 Platten extrem viele Fehler aufweisen, read_dma udma icrc error. Das war nicht immer so. Alle Platten bis auf 2, hatten insgesamt maximal 3 Fehler, soweit ich mich noch recht erinnern kann. Auch die Fehlerquote der letzten 4 Platten am HBA ist gestiegen, wenn auch nicht so drastisch wie bei den ersten Platten. Platte Nr. 9 (sdi) ist die Systemplatte und läuft nicht im RAID-Verbund.

SDA

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-92-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, read_dma udma icrc error, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 5K3000 Device Model: Hitachi HDS5C3030BLE630 Serial Number: MCE9215Q0B6SGW LU WWN Device Id: 5 000cca 37ec51972 Firmware Version: MZ6OAAB0 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5940 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Mon Jul 30 18:31:10 2018 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( sub-process/bin/bzip2 returned an error code1 0) The previous self-test routine completed without error read_dma udma icrc error no self-test has ever been run. Total time to complete Offline data collection: (26455) seconds, read_dma udma icrc error. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command, read_dma udma icrc error. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported, read_dma udma icrc error. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 441) minutes, read_dma udma icrc error. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported, read_dma udma icrc error. SCT Feature Control supported. SCT Data Table supported, read_dma udma icrc error. sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 66 occurred at disk power-on lifetime: 43531 hours (1813 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 27 31 47 0b Error: ICRC, read_dma udma icrc error, ABRT 1 sectors at LBA = 0x0b473127 = 189215015 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 00 read_dma udma icrc error 2d 47 e0 00 4d+17:25:43.119 WRITE DMA EXT 35 00 00 28 29 47 e0 00 4d+17:25:43.091 WRITE DMA EXT 35 00 00 read_dma udma icrc error 25 47 e0 00 4d+17:25:43.063 WRITE DMA EXT 35 00 00 28 21 47 e0 00 4d+17:25:43.035 WRITE DMA EXT 35 00 00 28 1d 47 e0 00 4d+17:25:43.007 WRITE DMA EXT Error 65 occurred at disk power-on lifetime: 43531 hours (1813 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 27 36 d5 0a Error: ICRC, read_dma udma icrc error, ABRT 1 sectors at LBA = 0x0ad53627 = 181745191 read_dma udma icrc error Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 00 28 32 d5 e0 00 4d+17:21:55.770 WRITE DMA EXT error while loading options 35 00 00 28 2e d5 e0 00 4d+17:21:55.745 WRITE DMA EXT 35 00 00 28 2a d5 e0 00 4d+17:21:55.702 WRITE DMA EXT 35 00 00 28 26 d5 e0 00 4d+17:21:55.687 WRITE DMA EXT 35 00 00 28 22 d5 e0 00 4d+17:21:55.662 WRITE DMA EXT Error 64 occurred at disk power-on lifetime: 43531 hours (1813 days + 19 hours) When the command that caused the error occurred, the device was active or idle, read_dma udma icrc error. After command completion i/o error 103 netsph, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 cf c9 07 97 09 Error: ICRC, ABRT 207 sectors at LBA = 0x099707c9 = 160892873 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 00 98 04 97 e0 00 4d+17:11:36.479 WRITE DMA EXT 35 00 00 98 00 97 e0 00 4d+17:11:36.451 WRITE DMA EXT 35 00 00 98 fc 96 e0 00 4d+17:11:36.426 WRITE DMA EXT 35 00 00 98 f8 96 e0 00 4d+17:11:36.383 WRITE DMA EXT 35 00 00 98 f4 96 e0 00 4d+17:11:36.367 WRITE DMA EXT Error 63 occurred at disk power-on lifetime: 43531 hours (1813 days + 19 hours) When the command that caused the error occurred, read_dma udma icrc error, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH cydia usr bin dpkg error -- -- -- -- -- -- -- 84 51 d0 c0 16 48 09 Error: ICRC, ABRT 208 sectors at LBA = 0x094816c0 = 155719360 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 00 90 14 48 e0 00 4d+17:09:15.860 WRITE DMA EXT 35 00 00 90 10 48 e0 00 4d+17:09:15.818 WRITE DMA EXT 35 00 00 90 0c 48 e0 00 4d+17:09:15.802 WRITE Read_dma udma icrc error EXT 35 00 00 90 08 48 e0 00 4d+17:09:15.781 WRITE DMA EXT 35 00 00 90 04 48 e0 00 4d+17:09:15.737 WRITE DMA EXT Error 62 occurred at disk power-on lifetime: 43530 hours (1813 days + 18 hours) When the command that caused the error occurred, read_dma udma icrc error, the device was active or idle, read_dma udma icrc error. After command completion occurred, read_dma udma icrc error, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 df 48 4a 06 Error: ICRC, read_dma udma icrc error, ABRT 1 sectors at LBA = 0x064a48df = 105531615 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 35 00 00 e0 44 4a e0 00 4d+16:44:20.176 WRITE DMA EXT 35 00 00 e0 40 4a e0 00 4d+16:44:20.149 WRITE DMA EXT 35 00 00 e0 3c 4a e0 00 4d+16:44:20.121 WRITE DMA EXT 35 00 00 e0 38 4a e0 00 4d+16:44:20.093 WRITE DMA EXT 35 00 00 e0 34 4a e0 00 4d+16:44:20.065 WRITE DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 1842 - # 2 Extended offline Interrupted (host reset) 90% 1834 - # 3 Short offline read_dma udma icrc error Completed without error 00% 1692 - SMART Selective self-test log data structure revision number 1 xaml parse error 3ds max SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 read_dma udma icrc error 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

SDB

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-92-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, read_dma udma icrc error, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 5K3000 Device Model: Hitachi HDS5C3030BLE630 Serial Number: MC49215X09HY5G LU WWN Device Id: 5 000cca 37ec4532e Firmware Version: MZ6OAAB0 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, read_dma udma icrc error, 4096 bytes physical Rotation Rate: 5940 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Mon Jul 30 18:32:51 2018 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (27320) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported, read_dma udma icrc error. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 456) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported, read_dma udma icrc error. SCT Data Table supported. sss where DD=days, hh=hours, mm=minutes, SS=sec, read_dma udma icrc error, and sss=millisec. It "wraps" read_dma udma icrc error 49.710 days. Error 66 occurred at disk power-on lifetime: 43421 hours (1809 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 31 df d6 e6 08 Error: ICRC, ABRT 49 sectors at LBA = 0x08e6d6df = 149346015 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 10 d3 e6 e0 00 4d+17:31:45.543 READ DMA EXT 25 00 00 10 cf e6 e0 00 4d+17:31:45.515 READ DMA EXT 25 00 00 10 cb e6 e0 00 4d+17:31:45.487 READ DMA EXT 25 00 00 10 c7 e6 e0 00 4d+17:31:45.459 READ DMA EXT 25 00 00 10 c3 e6 e0 00 4d+17:31:45.431 READ DMA EXT Error 65 occurred at disk power-on lifetime: 43421 hours (1809 days + 5 hours) When the command that caused the error occurred, read_dma udma icrc error, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 71 9f 33 d7 08 Error: ICRC, read_dma udma icrc error, ABRT 113 sectors at LBA = 0x08d7339f = 148321183 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 10 33 d7 e0 00 4d+17:31:13.115 READ DMA EXT 25 00 00 10 2f d7 e0 00 4d+17:31:13.087 READ DMA EXT 25 00 00 10 2b d7 e0 00 4d+17:31:13.059 READ DMA EXT 25 00 00 10 27 d7 e0 00 4d+17:31:13.031 READ DMA EXT 25 00 00 10 23 d7 e0 00 4d+17:31:13.004 READ DMA EXT Error 64 occurred at disk power-on lifetime: 43421 hours (1809 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 e1 27 1b c5 08 Error: ICRC, ABRT 225 sectors at LBA = 0x08c51b27 = 147135271 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 08 1b c5 e0 00 4d+17:30:36.249 READ DMA EXT 25 00 00 08 17 c5 e0 c error codes 4d+17:30:36.221 READ DMA EXT 25 00 00 08 13 c5 e0 00 4d+17:30:36.196 READ DMA EXT 25 00 00 08 0f c5 e0 00 4d+17:30:36.171 READ DMA EXT 25 00 00 08 0b c5 e0 00 4d+17:30:36.137 READ DMA EXT Error 63 occurred at disk power-on lifetime: 43421 hours (1809 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 f1 97 d0 92 07 Error: ICRC, ABRT 241 sectors at LBA = 0x0792d097 = 127062167 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 88 ce 92 e0 00 4d+17:20:43.214 READ DMA EXT 25 00 00 88 ca 92 e0 00 4d+17:20:43.186 READ DMA EXT 25 00 00 88 c6 92 e0 00 4d+17:20:43.158 READ DMA EXT 25 00 00 88 c2 92 e0 00 4d+17:20:43.130 READ DMA EXT 25 00 00 88 be 92 e0 00 4d+17:20:43.102 READ DMA EXT Hlae steam error 62 occurred at disk power-on lifetime: 43421 hours (1809 days + 5 hours) When the command that caused the error occurred, read_dma udma icrc error, the device was active or idle, read_dma udma icrc error. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 e1 ff bc 78 06 Error: ICRC, ABRT 225 sectors at LBA = 0x0678bcff = 108575999 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 e0 bc 78 e0 00 4d+17:11:34.743 READ DMA EXT 25 00 00 e0 b8 78 e0 00 4d+17:11:34.724 READ DMA EXT 25 00 00 e0 b4 78 e0 00 4d+17:11:34.691 READ DMA EXT 25 00 runtime error r6002 e0 b0 78 e0 00 4d+17:11:34.666 READ DMA EXT 25 00 00 e0 ac 78 e0 00 4d+17:11:34.641 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 1791 orange tiny terror amp # 2 Extended offline skyrim application load error 5 0000065434 Interrupted (host reset) 90% 1776 - # 3 Short offline Completed without error 00% 1633 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

SDC

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-92-generic] (local build) Copyright (C) 2002-13, read_dma udma icrc error, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 5K3000 Device Model: Hitachi HDS5C3030BLE630 Serial Number: MCE9215Q0B6YZW LU WWN Device Id: 5 000cca 37ec51a3c Firmware Version: MZ6OAAB0 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, read_dma udma icrc error, 4096 bytes physical Rotation Rate: 5940 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Mon Jul 30 18:33:18 2018 CEST SMART support is: Available - device has SMART capability, read_dma udma icrc error. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (27147) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported, read_dma udma icrc error. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 453) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported, read_dma udma icrc error. SCT Feature Control supported. SCT Data Table supported. sss where DD=days, hh=hours, mm=minutes, read_dma udma icrc error, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 82 occurred at disk power-on lifetime: 43358 hours (1806 days + 14 hours) When the command that caused the error occurred, the device was active or idle, read_dma udma icrc error. After command completion occurred, read_dma udma icrc error, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 41 e7 bd 64 0b Error: ICRC, ABRT 65 sectors at LBA = 0x0b64bde7 = 191151591 Commands leading error at line 32 the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 28 bd 64 e0 00 4d+17:22:55.255 READ DMA EXT 25 00 00 28 b9 64 e0 00 4d+17:22:55.227 READ DMA EXT 25 00 00 28 b5 64 e0 00 4d+17:22:55.199 READ DMA EXT 25 00 00 28 b1 64 e0 00 4d+17:22:55.171 READ DMA EXT 25 00 00 28 ad 64 e0 00 4d+17:22:55.157 READ DMA EXT Error 81 occurred at disk power-on lifetime: 43358 hours (1806 days + 14 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 31 f7 9f 4c 0b Error: ICRC, read_dma udma icrc error, ABRT 49 sectors at LBA = 0x0b4c9ff7 = 189571063 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 28 9d 4c e0 00 4d+17:22:03.299 READ DMA EXT 25 00 00 28 99 4c e0 00 4d+17:22:03.283 READ DMA EXT 25 00 00 28 95 4c e0 00 4d+17:22:03.252 READ DMA EXT 25 00 00 28 91 4c e0 00 4d+17:22:03.205 READ DMA EXT 25 00 00 28 8d 4c e0 00 4d+17:22:03.191 READ DMA EXT Error 80 occurred at disk power-on lifetime: 43357 hours (1806 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 97 b3 fc 09 Error: ICRC, ABRT 1 sectors at LBA = 0x09fcb397 = 167555991 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 98 b0 fc e0 00 4d+17:11:07.505 READ DMA EXT 25 00 00 98 ac fc e0 00 4d+17:11:07.477 READ DMA EXT 25 00 00 98 a8 fc e0 00 4d+17:11:07.450 READ DMA EXT 25 00 00 98 a4 fc e0 00 4d+17:11:07.422 READ DMA EXT 25 00 00 98 a0 fc e0 00 read_dma udma icrc error 4d+17:11:07.394 READ DMA EXT Error 79 occurred at disk power-on lifetime: 43357 hours (1806 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 e1 2f 33 d7 08 Error: ICRC, ABRT 225 sectors at LBA = 0x08d7332f = 148321071 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 10 33 d7 e0 00 4d+17:01:36.337 READ DMA EXT 25 00 00 10 2f d7 e0 00 4d+17:01:36.322 READ DMA EXT 25 00 00 10 2b d7 e0 00 4d+17:01:36.294 READ DMA EXT 25 00 00 10 27 d7 e0 00 4d+17:01:36.266 READ DMA EXT 25 00 00 10 23 d7 e0 00 4d+17:01:36.238 READ DMA EXT Error 78 hasp error 1025 at disk power-on lifetime: 43357 hours (1806 days + 13 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 21 bf be 78 06 Error: ICRC, ABRT 33 sectors at LBA = 0x0678bebf = 108576447 Commands leading to the command that caused the read_dma udma icrc error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 e0 bc 78 e0 00 4d+16:41:57.993 READ DMA EXT 25 00 00 e0 b8 78 e0 00 4d+16:41:57.978 READ DMA EXT 25 00 00 e0 b4 78 e0 00 4d+16:41:57.946 READ DMA EXT 25 00 00 e0 b0 78 e0 00 4d+16:41:57.909 READ DMA EXT 25 00 00 e0 ac 78 e0 00 4d+16:41:57.894 READ DMA EXT SMART Self-test log structure revision number read_dma udma icrc error Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1742 - # 2 Extended offline Interrupted (host reset) 90% 1742 - # 3 Short offline Completed without error 00% 1623 read_dma udma icrc error - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, read_dma udma icrc error, resume after 0 minute delay.

SDD

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-92-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 5K3000 Device Model: Hitachi HDS5C3030BLE630 Serial Number: MC49215X08ZS3G LU WWN Device Id: 5 000cca 37ec41662 Firmware Version: MZ6OAAB0 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5940 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Mon Jul 30 18:33:43 2018 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (26282) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) read_dma udma icrc error. Extended self-test routine recommended polling time: ( 438) minutes. SCT capabilities: (0x003d) SCT Status supported, read_dma udma icrc error. SCT Error Recovery Control supported. SCT Feature Control supported. read_dma udma icrc error Data Table supported, read_dma udma icrc error. sss where DD=days, hh=hours, read_dma udma icrc error, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days, read_dma udma icrc error. Error 86 occurred at disk power-on lifetime: 43370 hours (1807 days + 2 hours) When the command that caused the error occurred, read_dma udma icrc error, the device was active or idle. After command completion occurred, read_dma udma icrc error, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 41 cf 8c 17 0c Error: ICRC, ABRT 65 sectors at LBA = 0x0c178ccf = 202869967 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 10 8a 17 e0 00 5d+00:28:16.678 READ DMA EXT 25 00 00 10 86 17 e0 00 5d+00:28:16.639 READ DMA EXT 25 00 00 10 82 17 e0 00 5d+00:28:16.615 READ DMA EXT 25 00 00 10 7e 17 e0 00 5d+00:28:16.594 READ DMA EXT 25 00 00 10 7a 17 e0 00 5d+00:28:16.566 READ DMA EXT Error 85 occurred at disk power-on read_dma udma icrc error 43363 hours (1806 days + 19 hours) When the command that caused the error occurred, the device was active or idle, read_dma udma icrc error. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 91 97 a0 4c 0b Error: ICRC, ABRT 145 sectors at LBA = 0x0b4ca097 = 189571223 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 28 9d 4c e0 00 4d+17:53:35.378 READ DMA EXT 25 00 00 28 99 4c e0 00 4d+17:53:35.355 READ Read_dma udma icrc error EXT 25 00 00 28 95 4c e0 00 4d+17:53:35.321 READ DMA EXT 25 00 00 28 91 4c e0 00 4d+17:53:35.300 READ DMA EXT 25 00 00 28 8d 4c e0 00 4d+17:53:35.286 READ DMA EXT Error 84 occurred at disk power-on lifetime: 43363 hours (1806 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, read_dma udma icrc error, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 11 87 10 7c 09 Error: ICRC, ABRT 17 sectors at LBA = 0x097c1087 = 159125639 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 98 0c 7c e0 00 4d+17:38:30.635 READ DMA EXT 25 00 00 98 08 7c e0 00 4d+17:38:30.607 READ DMA EXT 25 00 00 98 04 7c e0 00 4d+17:38:30.580 READ DMA EXT 25 00 00 98 00 7c e0 00 4d+17:38:30.551 READ DMA EXT 25 00 00 98 fc 7b e0 00 4d+17:38:30.524 READ DMA EXT Error 83 occurred at disk power-on lifetime: 43363 hours (1806 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 c1 4f 33 d7 08 Error: ICRC, read_dma udma icrc error, ABRT 193 sectors at LBA = 0x08d7334f = 148321103 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 10 33 d7 e0 00 4d+17:33:08.381 READ DMA EXT 25 00 00 10 2f d7 e0 00 4d+17:33:08.354 READ DMA EXT 25 00 00 10 2b d7 e0 read_dma udma icrc error 4d+17:33:08.326 READ DMA EXT 25 00 00 10 27 d7 e0 00 4d+17:33:08.298 READ DMA EXT 25 00 00 10 23 d7 e0 00 4d+17:33:08.270 READ DMA EXT Error 82 occurred at disk power-on lifetime: 43363 hours (1806 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, read_dma udma icrc error, registers were: ER ST SC 3ware bios drive error CL CH DH -- -- -- -- -- -- -- 84 51 f1 0f 4a dc 06 Error: ICRC, ABRT 241 sectors at LBA = 0x06dc4a0f = 115100175 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- epson r800 communication error -- ---------------- -------------------- 25 00 00 00 4a dc e0 00 4d+17:16:53.450 READ DMA EXT 25 00 00 00 46 dc e0 00 4d+17:16:53.422 READ DMA EXT 25 00 00 00 42 dc e0 00 4d+17:16:53.394 READ DMA EXT 25 00 00 00 3e dc e0 00 4d+17:16:53.366 READ DMA EXT 25 00 00 00 3a dc e0 00 4d+17:16:53.338 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 1600 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA read_dma udma icrc error MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 read_dma udma icrc error 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

SDE

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-92-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 5K3000 Device Model: Hitachi HDS5C3030BLE630 Serial Number: MC49215X09304G LU WWN Device Id: 5 000cca 37ec4229e Read_dma udma icrc error Version: MZ6OAAB0 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, read_dma udma icrc error, 4096 bytes physical Rotation Rate: 5940 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Read_dma udma icrc error Jul 30 18:34:08 2018 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection samsung hd204ui raw read error rate was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (27493) seconds, read_dma udma icrc error. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support, read_dma udma icrc error. Suspend Offline collection upon new command. Offline surface scan supported, read_dma udma icrc error. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported, read_dma udma icrc error. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 459) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. sss where DD=days, read_dma udma icrc error, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 12 occurred at disk power-on lifetime: 41833 hours (1743 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 27 d3 39 0b Error: ICRC, ABRT 1 sectors at LBA = 0x0b39d327 = 188338983 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 28 d1 39 e0 00 4d+17:26:58.194 READ DMA EXT 25 00 00 28 cd 39 e0 00 4d+17:26:58.166 READ DMA EXT 25 00 00 28 c9 39 e0 00 4d+17:26:58.138 READ DMA EXT 25 00 00 28 c5 39 e0 00 4d+17:26:58.110 READ DMA EXT 25 00 00 28 c1 39 e0 00 4d+17:26:58.082 READ DMA EXT Error 11 occurred at disk power-on lifetime: 41831 hours (1742 days + 23 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 d1 f7 aa 98 0b Error: ICRC, ABRT 209 sectors at LBA = 0x0b98aaf7 = 194554615 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 c8 aa 98 e0 00 4d+15:17:29.347 READ DMA EXT 25 00 00 c8 a7 98 e0 00 4d+15:17:29.331 READ DMA EXT 25 00 00 c8 a6 98 e0 00 4d+15:17:29.320 READ DMA EXT 25 00 00 c8 a2 98 e0 00 4d+15:17:29.299 READ DMA EXT 25 00 00 c8 9f 98 e0 00 4d+15:17:29.276 READ DMA Read_dma udma icrc error Error 10 occurred at disk power-on lifetime: 41825 hours (1742 days + 17 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 01 b7 64 97 0f Error: ICRC, ABRT 1 sectors at LBA = 0x0f9764b7 = 261579959 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 b8 61 97 e0 00 4d+09:17:01.464 READ DMA EXT 25 00 00 b8 5d 97 e0 00 4d+09:17:01.436 READ DMA EXT 25 00 00 b8 59 97 e0 00 4d+09:17:01.409 READ DMA EXT 25 00 00 b8 55 97 e0 00 4d+09:17:01.381 READ DMA EXT 25 00 00 b8 51 97 e0 00 4d+09:17:01.353 READ DMA EXT Error 9 occurred at disk power-on lifetime: 41817 hours (1742 days + 9 hours) When the command that caused the error occurred, read_dma udma icrc error, the device was active or idle. After command completion occurred, read_dma udma icrc error, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 21 9f 0b 55 02 Error: ICRC, read_dma udma icrc error, ABRT at LBA = 0x02550b9f = 39127967 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 28 c0 08 55 40 00 4d+00:51:56.474 READ FPDMA QUEUED 60 00 08 c0 04 55 40 00 4d+00:51:56.435 READ FPDMA QUEUED 60 00 e0 c0 00 55 40 00 4d+00:51:56.422 READ FPDMA QUEUED 60 00 c0 c0 fc 54 40 00 4d+00:51:56.383 READ FPDMA QUEUED 60 00 a0 c0 f8 54 40 00 read_dma udma icrc error READ FPDMA QUEUED Error 8 occurred at disk power-on lifetime: 41817 hours (1742 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, read_dma udma icrc error were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 c1 bf 51 31 02 Error: ICRC, ABRT at LBA = 0x023151bf = 36786623 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 c0 80 51 31 40 00 4d+00:50:41.504 READ FPDMA QUEUED 60 00 a0 80 4d 31 40 00 4d+00:50:41.484 READ FPDMA QUEUED 60 00 98 80 49 31 40 00 4d+00:50:41.480 READ FPDMA QUEUED 60 00 60 80 45 31 40 00 4d+00:50:41.420 READ FPDMA QUEUED 60 00 58 80 41 31 40 00 4d+00:50:41.407 READ FPDMA QUEUED SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 185 not specify flash error - # 2 Short offline Completed without error 00% 139 - # 3 Short offline Completed without error 00% 86 - # 4 Extended offline Completed without error 00% 52 - # 5 Short offline Completed without error 00% 44 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

SDF

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-92-generic] (local build) Copyright (C) 2002-13, read_dma udma icrc error, Bruce Allen, Christian Franke, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 5K3000 Device Model: Hitachi HDS5C3030BLE630 Serial Number: MCE9215Q0B1DGW LU WWN Device Id: 5 000cca 37ec50558 Firmware Version: MZ6OAAB0 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, read_dma udma icrc error, 4096 bytes physical Rotation Rate: 5940 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Mon Jul 30 18:34:39 2018 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error, read_dma udma icrc error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run, read_dma udma icrc error. Total time to complete Offline data collection: (26455) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported, read_dma udma icrc error. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging supported, read_dma udma icrc error. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 441) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. read_dma udma icrc error Feature Control supported. SCT Data Table supported. sss where DD=days, read_dma udma icrc error, hh=hours, mm=minutes, SS=sec, read_dma udma icrc error, and sss=millisec, read_dma udma icrc error. It "wraps" after 49.710 days. Error 5 occurred at disk power-on lifetime: 42193 hours (1758 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 f1 cf 0c 55 02 Error: ICRC, ABRT at LBA = 0x02550ccf = 39128271 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 30 c0 0c 55 40 00 4d+00:40:54.379 READ FPDMA QUEUED 60 00 10 c0 08 55 40 00 4d+00:40:54.359 READ FPDMA QUEUED 60 00 e8 c0 04 55 40 00 4d+00:40:54.331 READ FPDMA QUEUED 60 00 c8 c0 00 55 40 00 4d+00:40:54.306 READ FPDMA QUEUED 60 00 a8 c0 fc 54 40 00 4d+00:40:54.278 READ FPDMA QUEUED Error 4 occurred at disk power-on lifetime: 42193 hours (1758 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 71 ff 40 ec 01 Error: ICRC, read_dma udma icrc error, ABRT at LBA = 0x01ec40ff = 32260351 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 70 70 3d ec 40 00 4d+00:36:58.887 READ FPDMA QUEUED 60 00 50 70 39 ec 40 00 4d+00:36:58.861 READ FPDMA QUEUED 60 00 38 70 35 ec 40 00 4d+00:36:58.829 READ FPDMA QUEUED 60 00 18 70 31 ec 40 00 4d+00:36:58.801 READ FPDMA QUEUED 60 00 e8 70 2d ec 40 00 4d+00:36:58.775 READ FPDMA QUEUED Error 3 occurred at disk power-on lifetime: 42193 hours (1758 days + 1 hours) When the command that caused the error occurred, read_dma udma icrc error, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 41 3f 94 34 01 Error: ICRC, ABRT at LBA = 0x0134943f = 20223039 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 60 00 d8 80 92 34 40 00 4d+00:30:29.332 READ FPDMA QUEUED 60 00 b0 80 8e 34 40 00 4d+00:30:29.307 READ FPDMA QUEUED read_dma udma icrc error 60 00 90 80 8a 34 40 00 4d+00:30:29.280 READ FPDMA QUEUED 60 00 70 80 86 34 40 00 4d+00:30:29.255 READ FPDMA QUEUED 60 00 50 80 82 34 40 00 4d+00:30:29.227 READ FPDMA QUEUED Error 2 occurred at disk power-on lifetime: 42187 hours (1757 days + 19 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 f1 0f 20 5c 02 Error: ICRC, ABRT at LBA = 0x025c200f = 39591951 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 00 e0 00 20 5c 40 00 3d+18:49:04.606 WRITE FPDMA QUEUED 61 00 c0 00 1c 5c 40 00 3d+18:49:04.583 WRITE FPDMA QUEUED 61 00 a0 00 18 5c 40 00 3d+18:49:04.559 WRITE FPDMA QUEUED 61 00 80 00 14 5c 40 00 3d+18:49:04.535 WRITE FPDMA QUEUED 61 00 60 00 10 5c 40 00 3d+18:49:04.511 WRITE FPDMA QUEUED Error 1 occurred at disk power-on lifetime: 42184 hours (1757 days + 16 hours) When the command that caused the error occurred, the device was active or idle, read_dma udma icrc error. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 a3 5d e0 11 02 Error: ICRC, ABRT at Read_dma udma icrc error = 0x0211e05d = 34725981 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 61 00 e8 00 e0 11 40 00 3d+16:22:46.381 WRITE FPDMA QUEUED 61 00 70 00 dc 11 40 00 3d+16:22:46.146 WRITE FPDMA QUEUED 61 00 68 00 d8 11 40 00 3d+16:22:46.138 WRITE FPDMA QUEUED 61 00 e0 00 d4 11 40 00 3d+16:22:45.866 WRITE FPDMA QUEUED 61 00 50 00 d0 11 40 00 3d+16:22:45.852 WRITE FPDMA QUEUED SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 542 - undefined reference yyerror flex bison 2 Extended offline Completed without error 00% 504 - # 3 Short offline Completed without error 00% 315 - # 4 Short offline Completed without error 00% 298 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing error 1723 java 0 0 Not_testing 3 read_dma udma icrc error 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

SDG

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-92-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, read_dma udma icrc error, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 5K3000 Device Model: Hitachi HDS5C3030BLE630 Serial Number: MCE9215Q0B6YVW LU WWN Device Id: 5 000cca 37ec51a38 Firmware Version: MZ6OAAB0 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, read_dma udma icrc error, 4096 bytes physical Rotation Rate: 5940 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s) Local Time is: Mon Jul 30 18:35:10 2018 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run. Total time to complete Offline data collection: (26455) seconds, read_dma udma icrc error. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported, read_dma udma icrc error. General Purpose Logging supported. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 441) minutes. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. sss where DD=days, hh=hours, read_dma udma icrc error, mm=minutes, SS=sec, and sss=millisec, read_dma udma icrc error. It "wraps" after 49.710 days. Error 13 occurred at disk power-on lifetime: read_dma udma icrc error hours (1757 days + 9 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 11 f7 b1 90 08 Error: ICRC, ABRT 17 sectors at LBA = 0x0890b1f7 = 143700471 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 08 af 90 e0 00 4d+17:08:29.783 READ DMA EXT 25 00 00 08 ab 90 e0 00 4d+17:08:29.755 READ DMA EXT 25 00 00 08 a7 90 e0 00 4d+17:08:29.727 READ DMA EXT 25 00 00 08 a3 90 e0 00 4d+17:08:29.699 READ DMA EXT 25 00 00 08 9f 90 e0 00 4d+17:08:29.671 READ DMA EXT Error 12 occurred at disk power-on lifetime: 42175 hours (1757 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 31 9f 1e 5a 0d Error: ICRC, ABRT 49 sectors at LBA = 0x0d5a1e9f = 224009887 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC 2896 error code Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 d0 1d 5a e0 00 4d+15:35:20.071 READ DMA EXT 25 00 00 d0 19 5a e0 00 4d+15:35:20.059 READ DMA EXT 25 00 00 d0 15 5a e0 00 4d+15:35:20.032 READ DMA EXT 25 00 00 d0 11 5a e0 00 4d+15:35:19.988 READ DMA EXT 25 00 00 d0 0d 5a e0 00 4d+15:35:19.966 READ DMA EXT Error 11 occurred at disk power-on lifetime: 42175 hours (1757 days + 7 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, read_dma udma icrc error, registers were: ER ST SC SN CL CH DH -- -- -- -- error 43 file could not be found -- -- 84 51 41 87 ae 98 0b Error: ICRC, ABRT 65 sectors at LBA = 0x0b98ae87 = 194555527 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 c8 aa 98 e0 00 4d+15:21:08.491 READ DMA EXT 25 00 00 c8 a7 98 e0 00 4d+15:21:08.479 READ DMA EXT 25 00 00 c8 a6 read_dma udma icrc error e0 00 4d+15:21:08.469 READ DMA EXT 25 00 00 c8 a2 98 e0 00 4d+15:21:08.442 READ DMA EXT 25 00 00 c8 9f 98 e0 00 4d+15:21:08.422 READ DMA EXT Error 10 occurred at disk power-on lifetime: 42172 hours (1757 days + 4 hours) When the command that caused the error occurred, read_dma udma icrc error, the device was active or idle. After command completion occurred, read_dma udma icrc error, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 31 5f fa e3 04 Error: ICRC, ABRT 49 sectors at LBA = 0x04e3fa5f = 82049631 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 90 f9 e3 e0 00 4d+12:14:22.490 READ DMA EXT 25 00 00 90 f5 e3 e0 00 4d+12:14:22.462 READ DMA EXT 25 00 00 90 f1 e3 e0 00 4d+12:14:22.421 READ DMA EXT 25 00 00 90 ed e3 e0 00 4d+12:14:22.394 READ DMA EXT 25 00 00 90 e9 e3 e0 00 4d+12:14:22.372 READ DMA EXT Error 9 occurred at disk power-on lifetime: 42169 hours (1757 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, read_dma udma icrc error, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 71 37 31 55 03 Error: ICRC, ABRT 113 sectors at LBA = 0x03553137 = 55914807 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 a8 30 55 e0 00 read_dma udma icrc error READ DMA EXT 25 00 00 a8 2c 55 e0 00 4d+09:50:57.966 READ DMA EXT 25 00 00 a8 28 55 e0 00 4d+09:50:57.938 READ DMA EXT 25 00 00 a8 24 55 e0 00 4d+09:50:57.924 READ DMA EXT 25 00 00 a8 20 55 e0 00 4d+09:50:57.883 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 563 - # 2 Extended offline Completed without error 00% 552 - # 3 Short offline Completed without error 00% 394 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, read_dma udma icrc error, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay.

SDH

smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-92-generic] (local build) Copyright (C) 2002-13, Bruce Allen, Christian Franke, read_dma udma icrc error, www.smartmontools.org === START OF INFORMATION SECTION === Model Family: Hitachi Deskstar 5K3000 Device Model: Hitachi HDS5C3030BLE630 Serial Number: MC49215X09BY9A LU WWN Device Id: 5 000cca 37ec4442e Firmware Version: MZ6OAAB0 User Capacity: 3,000,592,982,016 bytes [3.00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Range check errors Rate: 5940 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ATA8-ACS T13/1699-D revision 4 SATA Version is: SATA 3.0, read_dma udma icrc error, 6.0 Pxe-m0f error message (current: 1.5 Gb/s) Local Time is: Mon Jul 30 18:35:43 2018 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x84) Offline data collection activity was suspended by an interrupting command from host. Auto Offline Data Collection: Enabled, read_dma udma icrc error. Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run, read_dma udma icrc error. Total time to complete Offline data collection: (28880) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command, read_dma udma icrc error. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode, read_dma udma icrc error. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported, read_dma udma icrc error. General Purpose Logging supported. Short windows socket version 2 api error code routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 482) minutes, read_dma udma icrc error. SCT capabilities: (0x003d) SCT Status supported. SCT Error Recovery Control supported. SCT Feature Control supported. SCT Data Table supported. sss where DD=days, read_dma udma icrc error, hh=hours, mm=minutes, read_dma udma icrc error, SS=sec, and sss=millisec, read_dma udma icrc error. It "wraps" after 49.710 days. Error 13 occurred at disk power-on lifetime: 42342 hours (1764 days + 6 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 71 8f 16 read_dma udma icrc error 02 Error: ICRC, ABRT 113 sectors at LBA = 0x02e4168f = 48502415 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 00 16 e4 e0 00 4d+16:22:37.001 READ DMA EXT 25 00 00 00 12 e4 e0 00 read_dma udma icrc error 4d+16:22:36.973 READ DMA EXT 25 00 00 00 0e e4 e0 00 4d+16:22:36.945 READ DMA EXT 25 00 00 00 0a e4 e0 00 4d+16:22:36.917 READ DMA EXT 25 00 00 00 06 e4 e0 00 4d+16:22:36.889 READ DMA EXT Error 12 occurred canon i80 service error 5100 disk power-on lifetime: 42341 hours (1764 days + 5 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 a1 27 ab 98 0b Error: ICRC, read_dma udma icrc error, ABRT 161 sectors at LBA = 0x0b98ab27 = 194554663 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 c8 aa 98 e0 00 4d+15:22:21.138 READ DMA EXT 25 00 00 c8 a7 98 e0 00 4d+15:22:21.114 READ DMA EXT 25 00 00 c8 read_dma udma icrc error 98 e0 00 4d+15:22:21.108 READ DMA EXT 25 00 00 c8 a2 98 e0 00 4d+15:22:21.089 READ DMA EXT 25 00 00 c8 9f 98 e0 00 4d+15:22:21.066 READ DMA EXT Error 11 occurred at disk power-on lifetime: 42338 hours (1764 days + 2 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 c1 e7 5f a9 01 Error: ICRC, ABRT 193 sectors at LBA = 0x01a95fe7 = 27877351 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 a8 5d a9 e0 00 4d+11:49:03.785 READ DMA EXT 25 00 00 a8 59 a9 e0 00 4d+11:49:03.757 READ DMA EXT 25 00 00 a8 55 a9 e0 00 4d+11:49:03.729 READ DMA EXT 25 00 00 a8 51 a9 e0 00 4d+11:49:03.688 READ DMA EXT 25 00 00 a8 4d a9 e0 00 4d+11:49:03.676 READ DMA EXT Error 10 occurred at disk power-on lifetime: 42337 hours (1764 days + 1 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, read_dma udma icrc error, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 61 bf fb 1e 01 Error: ICRC, read_dma udma icrc error, ABRT 97 sectors at LBA = 0x011efbbf = 18807743 Commands leading to the command that caused the error were: obsdx9 .exe error CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 20 f8 1e e0 00 4d+11:44:28.038 READ DMA EXT 25 00 00 20 f4 1e e0 00 4d+11:44:28.011 READ DMA EXT 25 00 00 20 f0 1e e0 00 4d+11:44:27.983 READ DMA EXT 25 00 00 20 ec 1e e0 00 4d+11:44:27.955 READ DMA EXT 25 00 00 20 e8 1e e0 00 4d+11:44:27.927 READ DMA EXT Error 9 occurred at disk power-on lifetime: 42327 hours (1763 days + 15 hours) When the command that caused the error occurred, the device was active or idle, read_dma udma icrc error. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 21 67 27 99 05 Error: ICRC, ABRT 33 sectors at LBA = 0x05992767 = 93923175 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 25 00 00 88 26 99 e0 00 4d+01:28:01.075 READ DMA EXT 25 00 00 88 22 99 e0 00 4d+01:28:01.048 READ DMA EXT 25 00 00 88 1e 99 e0 00 4d+01:28:01.023 READ DMA EXT 25 00 00 88 1a 99 e0 00 4d+01:28:00.996 READ DMA EXT 25 00 00 88 16 99 e0 00 4d+01:28:00.964 READ DMA EXT SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Completed without error 00% 624 - # 2 Short offline Completed without error 00% 425 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, read_dma udma icrc error, resume after 0 minute delay.

Wie man sehen kann, lautet der Fehler bei allen Platten Error: ICRC, read_dma udma icrc error, ABRT Ist das ein Indiz, read_dma udma icrc error, dass meine HBA-Karte den Geist aufgibt?

Danke schon mal für eure Hilfe 😉

Bilder

Troubleshooting DMA and LBA Errors

Non-Fatal Errors

CF NID Not Found Error

Some newer Compact Flash cards are giving users trouble, in particular the Sandisk 4GB 30MB/s cards seem to be problematic.

The cards may function properly, read_dma udma icrc error, but will often generate an error in the logs such as:

ad0: FAILURE - READ status=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND> LBA=7813119 ad0: FAILURE - READ status=51<READY,DSC,ERROR> error=10<NID_NOT_FOUND> LBA=7813119

This normal and safe to ignore. It has nothing to do with image size, read_dma udma icrc error, a 1 GB image can be used on a 4 GB card and they still do that. From what I've been able to gather on that, the cards report they have a larger usable size than they do, and when the FreeBSD ATA code initializes it tries to read the end of the disk even if its partition is nowhere near that, which the CF is reporting doesn't actually exist, which is what that log message says.

according to ATA-7 specification, Section 6.59.6 is: "IDNF shall be set to one if a user-accessible address could not be found. IDNF shall be set to one if an address outside of the range of user-accessible addresses is requested if command aborted is not returned." FreeBSD labels this bit as NID_NOT_FOUND

Summarized from this forum post.

SETFEATURES Error

Newer snapshots and releases of pfSense® software (after 2.0.1) also attempt to setup APM for an ATA hard drive at boot. Sometimes the detection yields a non-fatal error when trying to find if the value is supported, or when the drive claims it's supported but can't set it, read_dma udma icrc error. That error is:

ad0: FAILURE - SETFEATURES 0x85 status=41<READY,ERROR> error=4<ABORTED>

It should only be seen once at bootup on such systems, and can safely be ignored.

Fatal Errors

The following errors would indicate more serious problems such as a faulty HDD/CF, read_dma udma icrc error, faulty cable/controller, read_dma udma icrc error, a faulty CF/SATA/IDE converter, a device out of space, or possibly that :doc:`DMA needs disabled on that combination of hardware </hardware/boot-troubleshooting>`.

ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=40<UNCORRECTABLE> LBA=3919 ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=207 ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=207 ad0: FAILURE - READ_DMA status=51<READY,DSC,ERROR> error=84<ICRC,ABORTED> LBA=207 g_vfs_done():ad0s1a[READ(offset=65536, length=8192)]error = 5 ad0: FAILURE - WRITE_DMA status=51<READY,DSC,ERROR> error=4<ABORTED> dma=0x06 LBA=1129359

Other Errors

The following errors have been observed on certain hardware platforms running pfSense 2.2. While they do not appear to be fatal, read_dma udma icrc error, the cause appears to be a disk driver issue in FreeBSD (9.2 and later) and it may degrade performance, read_dma udma icrc error. If these errors are encountered, attempt to reproduce the problem with a stock FreeBSD 10.1 or later installation and report the problem directly to FreeBSD.

(ada0:ata0:0:1:0): READ_DMA, read_dma udma icrc error. ACB: c8 00 3f 95 07 40 00 00 00 00 08 00 (ada0:ata0:0:1:0): CAM status: ATA Status Error (ada0:ata0:0:1:0): ATA status: ff (BSY DRDY DF SERV DRQ CORR IDX ERR), error: 00 () (ada0:ata0:0:1:0): RES: ff 00 46 95 07 00 00 00 00 00 00 (ada0:ata0:0:1:0): Retrying command (ada0:ata0:0:1:0): WRITE_DMA. ACB: ca 00 ef e8 1a 40 00 00 00 00 08 00 (ada0:ata0:0:1:0): CAM status: ATA Status Error (ada0:ata0:0:1:0): ATA status: ff (BSY DRDY DF SERV DRQ CORR IDX ERR), error: 00 () (ada0:ata0:0:1:0): RES: ff 00 ef e8 1a 00 00 00 00 08 00 (ada0:ata0:0:1:0): Retrying command

This appears to further be limited to onboard CF-to-SATA sockets. Using another disk type (mSATA, SATA, etc) may also be a viable workaround.

Hello I am trying to run a pfSense with an Alix based hardware (alix 2D13) and an IDE drive (samsung 160Go).
System has installed correctly, but at the end of the boot, I have problem with "READ_DMA UDMA ICRC"

Do you know what might be the reason for such error - do you have any suggestion to try to solve this issue?

Thanks.

Boot log included below…

Copyright © 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, read_dma udma icrc error, 1986, 1988, read_dma udma icrc error, 1989, 1991, 1992, 1993, 1994
      The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p5 #0: Sun Dec  6 23:05:10 EST 2009
  [email protected]_7.2_pfSense_1.2.3_snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense_wrap.7.i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Geode(TM) Integrated Processor by AMD PCS (498.05-MHz read_dma udma icrc error CPU)
Origin = "AuthenticAMD"  Id = 0x5a2  Stepping = 2
Features=0x88a93d <fpu,de,pse,tsc,msr,cx8,sep,pge,cmov,clflush,mmx>AMD Features=0xc0400000 <mmx+,3dnow!+,3dnow!>real memory  = 268435456 (256 MB)
avail memory = 248639488 (237 MB)
pnpbios: Bad PnP BIOS data checksum
wlan: mac acl policy registered
K6-family MTRR support enabled (2 registers)
ACPI Error (tbxfroot-0308): A valid RSDP was not found [20070320]
ACPI: Table initialisation failed: AE_NOT_FOUND
ACPI: Try disabling either ACPI or apic support.
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
pcib0: <host to="" pci="" bridge="">pcibus 0 on motherboard
pci0: <pci bus="">on pcib0
Geode LX: PC Engines ALIX.2 v0.99h tinyBIOS V1.4a (C)1997-2007
pci0: <encrypt decrypt,="" entertainment="" crypto="">at device 1.2 (no driver attached)
vr0: <via 10="" vt6105m="" rhine="" iii="" 100basetx="">port 0x1000-0x10ff mem 0xe0000000-0xe00000ff irq 10 at device 9.0 on pci0
vr0: Read_dma udma icrc error 0x2
vr0: Revision: 0x96
miibus0: <mii bus="">on vr0
ukphy0: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, read_dma udma icrc error, auto
vr0: Ethernet address: 00:0d:b9:1b:aa:7c
vr0: [ITHREAD]
vr1: <via 10="" vt6105m="" rhine="" iii="" 100basetx="">port 0x1400-0x14ff mem 0xe0040000-0xe00400ff irq 11 at device 10.0 on pci0
vr1: Quirks: 0x2
vr1: Revision: 0x96
miibus1: <mii bus="">on vr1
ukphy1: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus1
ukphy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, read_dma udma icrc error, auto
vr1: Ethernet address: 00:0d:b9:1b:aa:7d
vr1: [ITHREAD]
vr2: <via 10="" vt6105m="" rhine="" iii="" 100basetx="">port 0x1800-0x18ff mem 0xe0080000-0xe00800ff irq 15 at device 11.0 on pci0
vr2: Quirks: 0x2
vr2: Revision: 0x96
miibus2: <mii bus="">on vr2
ukphy2: <generic ieee="" 802.3u="" media="" interface="">PHY 1 on miibus2
ukphy2:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr2: Ethernet address: 00:0d:b9:1b:aa:7e
vr2: [ITHREAD]
isab0: <pci-isa bridge="">port 0x6000-0x6007,0x6100-0x61ff,0x6200-0x623f,0x9d00-0x9d7f,0x9c00-0x9c3f at device 15.0 on pci0
isa0: <isa bus="">on isab0
atapci0: <amd cs5536="" udma100="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xff00-0xff0f at device 15.2 on pci0
ata0: <ata 0="" channel="">on atapci0
ata0: [ITHREAD]
ata1: <ata 1="" channel="">on atapci0
ata1: [ITHREAD]
ohci0: <ohci (generic)="" usb="" controller="">mem 0xefffe000-0xefffefff irq 12 at device 15.4 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: <ohci (generic)="" usb="" controller="">on ohci0
usb0: USB revision 1.0
uhub0: <amd 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usb0
uhub0: 4 ports with 4 removable, read_dma udma icrc error, self powered
ehci0: <amd cs5536="" (geode)="" usb="" 2.0="" controller="">mem 0xefffd000-0xefffdfff irq 12 at device 15.5 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, read_dma udma icrc error, 4 ports each: usb0
usb1: <amd cs5536="" (geode)="" usb="" 2.0="" controller="">on ehci0
usb1: USB revision 2.0
uhub1: <amd 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usb1
uhub1: 4 ports with 4 removable, self powered
cpu0 on motherboard
orm0: <isa option="" rom="">at iomem 0xe0000-0xea7ff pnpid ORM0000 on isa0
ppc0: parallel port not found.
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 16550A, console
sio0: [FILTER]
sio1 at port 0x2f8-0x2ff irq 3 on isa0
sio1: type 16550A
sio1: [FILTER]
Timecounter "TSC" frequency 498053542 Hz quality 800
Timecounters tick every 10.000 msec
IPsec: Initialized Security Association Processing.
ad0: 152627MB <samsung hm160hc="" lq100-10="">at ata0-master UDMA100
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: FAILURE - READ_DMA status=51 <ready,dsc,error>error=84 <icrc,aborted>LBA=63
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: FAILURE - READ_DMA status=51 <ready,dsc,error>error=84 <icrc,aborted>LBA=63
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: FAILURE - READ_DMA status=51 <ready,dsc,error>error=84 <icrc,aborted>LBA=63
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: WARNING - READ_DMA UDMA ICRC read_dma udma icrc error (retrying request) LBA=63
ad0: FAILURE - READ_DMA status=51 <ready,dsc,error>error=84 <icrc,aborted>LBA=63
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: FAILURE - READ_DMA status=51 <ready,dsc,error>error=84 <icrc,aborted>LBA=63
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: FAILURE - READ_DMA status=51 <ready,dsc,error>error=84 <icrc,aborted>LBA=63
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: FAILURE read_dma udma icrc error READ_DMA timed out LBA=63
ad0: WARNING - Read_dma udma icrc error UDMA ICRC error (retrying request) LBA=63
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: FAILURE - READ_DMA timed out LBA=63
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: WARNING read_dma udma icrc error READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: FAILURE - READ_DMA status=51 <ready,dsc,error>error=84 <icrc,aborted>LBA=63
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: WARNING - READ_DMA UDMA ICRC error (retrying request) LBA=63
ad0: FAILURE - READ_DMA status=51 <ready,dsc,error>error=84 <icrc,aborted>LBA=63
Trying to mount root from ufs:/dev/da0s1a
Trying to mount root from ufs:/dev/da0s1a
Trying read_dma udma icrc error mount root from ufs:/dev/da0s1a
Trying to mount root from ufs:/dev/da0s1a
Trying to mount root from ufs:/dev/da0s1a
Trying to mount root from ufs:/dev/da0s1a
Trying to mount root from ufs:/dev/da0s1a
Trying to mount root from ufs:/dev/da0s1a
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯
Gregober –-> PGP ID --> 0x1BA3C2FD
bsd @[email protected] todoo.biz
¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯</icrc,aborted></ready,dsc,error></icrc,aborted></ready,dsc,error></icrc,aborted></ready,dsc,error></icrc,aborted></ready,dsc,error></icrc,aborted></ready,dsc,error></icrc,aborted></ready,dsc,error></icrc,aborted></ready,dsc,error></icrc,aborted></ready,dsc,error></samsung></isa></amd></amd></amd></amd></ohci></ohci></ata></ata></amd></isa></pci-isa></generic></mii></via></generic></mii></via></generic></mii></via></encrypt></pci></host></software></mmx+,3dnow!+,3dnow!></fpu,de,pse,tsc,msr,cx8,sep,pge,cmov,clflush,mmx>

Thread: Failed command: READ DMA

Code:

[ 78.075342] ata4.00: cmd 25/00:80:38:33:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in[ 78.077865] ata4.00: status: { DRDY ERR } [ 78.079137] ata4.00: error: { ICRC ABRT } [ 78.080401] ata4: soft resetting link [ 78.252231] ata4.00: configured for UDMA/33 [ 78.252241] ata4: EH complete [ 78.270646] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 78.271928] read_dma udma icrc error BMDMA stat 0x26 [ 78.273202] ata4.00: failed command: READ DMA EXT [ 78.274461] ata4.00: cmd 25/00:80:b8:33:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 78.276993] ata4.00: status: { DRDY ERR } [ 78.278218] ata4.00: error: { ICRC ABRT } [ 78.279433] ata4: soft resetting link [ 78.448226] ata4.00: configured for UDMA/33 [ 78.448234] ata4: EH complete [ 78.458240] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 78.459481] ata4.00: BMDMA stat 0x26 programming channels tk 359 errors 78.460710] ata4.00: failed command: READ DMA EXT [ 78.461928] ata4.00: cmd 25/00:80:b8:33:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 78.464402] ata4.00: status: { DRDY ERR } [ 78.465650] ata4.00: error: { ICRC ABRT } [ 78.466864] ata4: soft resetting link [ 78.636229] ata4.00: configured for UDMA/33 [ 78.636236] ata4: EH complete [ 78.645755] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 78.645787] ata4.00: BMDMA stat 0x26 [ 78.645806] ata4.00: failed command: READ DMA EXT [ 78.645832] ata4.00: cmd 25/00:80:b8:33:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 78.645905] ata4.00: status: { DRDY ERR } [ 78.645924] ata4.00: error: { ICRC ABRT } [ read_dma udma icrc error 78.645949] ata4: soft resetting link [ 78.816233] ata4.00: configured for UDMA/33 [ 78.816239] ata4: EH complete [ 78.838397] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 78.838435] ata4.00: BMDMA stat 0x26 [ 78.838455] ata4.00: failed command: READ DMA EXT [ 78.838482] ata4.00: cmd 25/00:80:38:37:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 78.838555] ata4.00: status: { DRDY ERR } [ 78.838575] ata4.00: error: { ICRC ABRT } [ 78.838600] ata4: soft resetting link [ 79.008237] ata4.00: configured for UDMA/33 [ 79.008245] ata4: EH complete [ 79.026343] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 79.026377] ata4.00: BMDMA stat 0x26 [ 79.026396] ata4.00: failed command: READ DMA EXT [ 79.026423] ata4.00: cmd 25/00:80:b8:37:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 79.026495] ata4.00: status: { DRDY ERR } [ 79.026515] ata4.00: error: { ICRC ABRT } [ 79.026540] ata4: soft resetting link [ 79.196231] ata4.00: configured for UDMA/33 [ 79.196238] ata4: EH complete [ 79.214561] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 79.215840] ata4.00: BMDMA stat 0x26 [ 79.217106] ata4.00: failed command: READ DMA EXT [ 79.218355] ata4.00: cmd 25/00:80:38:38:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 79.220851] ata4.00: status: { DRDY ERR } [ 79.222058] ata4.00: error: { ICRC ABRT } [ 79.223255] ata4: soft resetting link [ 79.392231] ata4.00: configured for UDMA/33 [ 79.392238] ata4: EH complete [ 79.402350] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 79.403565] ata4.00: BMDMA stat 0x26 [ 79.404775] ata4.00: failed command: READ DMA EXT [ 79.405971] ata4.00: cmd 25/00:80:38:38:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 79.408402] ata4.00: status: { DRDY ERR } [ 79.409614] ata4.00: error: { ICRC ABRT } [ 79.410816] ata4: soft resetting link [ 79.580225] ata4.00: configured for UDMA/33 [ 79.580232] ata4: EH complete [ 79.589957] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 79.589989] ata4.00: BMDMA stat 0x26 [ 79.590009] ata4.00: failed command: READ DMA EXT [ read_dma udma icrc error 79.590035] ata4.00: cmd 25/00:80:38:38:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 79.590107] ata4.00: status: { DRDY ERR } [ 79.590127] ata4.00: error: { ICRC ABRT } [ 79.590151] ata4: soft resetting link [ 79.760230] ata4.00: configured for UDMA/33 [ 79.760236] ata4: EH complete [ 79.778531] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 79.778565] ata4.00: BMDMA stat 0x26 [ 79.778584] ata4.00: failed command: READ DMA EXT [ 79.778611] ata4.00: cmd 25/00:80:b8:38:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 79.778683] ata4.00: status: { DRDY ERR } [ 79.778703] ata4.00: error: { ICRC ABRT } [ 79.778728] ata4: soft resetting load library error gupta cdlli15.dll [ read_dma udma icrc error 79.948228] ata4.00: configured for UDMA/33 [ 79.948235] ata4: EH complete [ 79.966878] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 79.966914] ata4.00: BMDMA stat 0x26 [ 79.966933] ata4.00: failed command: READ DMA EXT [ 79.966960] ata4.00: cmd 25/00:80:b8:39:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 79.967033] ata4.00: status: { DRDY ERR } [ 79.967053] ata4.00: error: { ICRC ABRT } [ 79.967078] ata4: soft resetting link [ 80.136235] ata4.00: configured for UDMA/33 [ 80.136243] ata4: EH complete [ 80.156288] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 80.157543] ata4.00: BMDMA stat 0x26 [ 80.158795] ata4.00: failed command: READ DMA EXT [ 80.160058] ata4.00: cmd 25/00:80:b8:3b:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 80.162580] ata4.00: status: { DRDY ERR } [ 80.163849] ata4.00: error: { ICRC ABRT } [ 80.165114] ata4: soft resetting link [ 80.336230] ata4.00: configured for UDMA/33 [ 80.336239] ata4: EH complete [ 80.354793] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 80.356078] ata4.00: BMDMA stat 0x26 [ 80.357337] ata4.00: failed command: READ DMA EXT [ 80.358590] ata4.00: cmd 25/00:80:b8:3b:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 80.361097] ata4.00: status: { DRDY ERR } [ 80.362308] ata4.00: error: { ICRC ABRT } [ 80.363509] ata4: soft resetting link [ 80.532229] ata4.00: configured for UDMA/33 [ read_dma udma icrc error 80.532237] ata4: EH complete [ 80.544020] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 80.544056] ata4.00: BMDMA stat 0x26 [ 80.544076] ata4.00: failed command: READ DMA EXT [ 80.544103] ata4.00: cmd 25/00:80:38:3d:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 80.544175] ata4.00: status: { DRDY ERR } [ 80.544195] ata4.00: error: { ICRC ABRT } [ 80.544221] ata4: soft resetting link [ 80.716237] ata4.00: configured for UDMA/33 [ 80.716246] ata4: EH complete [ 80.734622] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 80.734660] ata4.00: BMDMA stat 0x26 [ 80.734680] ata4.00: failed command: READ DMA EXT [ 80.734707] ata4.00: cmd 25/00:80:b8:40:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 80.734780] ata4.00: status: { DRDY ERR } [ 80.734800] ata4.00: error: { ICRC ABRT } [ 80.734825] ata4: soft resetting link [ 80.904230] ata4.00: configured for UDMA/33 [ 80.904239] ata4: EH complete [ 80.923685] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 80.923721] ata4.00: BMDMA stat 0x26 [ 80.923741] ata4.00: failed command: READ DMA EXT [ 80.923768] ata4.00: cmd 25/00:80:b8:42:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 80.923841] ata4.00: status: { DRDY ERR } [ 80.923861] ata4.00: error: { ICRC ABRT } [ 80.923886] ata4: soft resetting link [ 81.092230] ata4.00: configured for UDMA/33 [ 81.092239] ata4: EH complete [ 81.112531] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 81.113798] ata4.00: BMDMA stat 0x26 [ 81.115041] ata4.00: failed command: READ DMA EXT [ 81.116300] ata4.00: cmd 25/00:80:b8:43:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 81.116301] ata4.00: status: { DRDY ERR } [ 81.116304] ata4.00: error: { ICRC ABRT } [ 81.116312] ata4: soft resetting link [ 81.288228] ata4.00: configured read_dma udma icrc error UDMA/33 [ 81.288237] ata4: EH complete [ 81.303513] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 81.304795] ata4.00: BMDMA stat 0x26 [ 81.306043] ata4.00: failed command: READ DMA EXT [ 81.307282] ata4.00: cmd 25/00:80:b8:45:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 81.309765] ata4.00: status: { DRDY ERR } [ 81.310972] ata4.00: error: { ICRC ABRT } [ 81.312167] ata4: soft resetting link [ 81.484229] ata4.00: configured for UDMA/33 [ 81.484238] ata4: EH complete [ 81.501968] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 81.502000] ata4.00: BMDMA stat 0x26 [ 81.502020] ata4.00: failed command: READ DMA EXT [ 81.502046] ata4.00: cmd 25/00:80:b8:45:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 81.502118] ata4.00: status: { DRDY ERR } [ 81.502138] ata4.00: error: { ICRC ABRT } [ 81.502163] ata4: soft resetting link [ 81.672229] ata4.00: configured for UDMA/33 [ 81.672235] ata4: Read_dma udma icrc error complete [ 81.691189] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 81.691226] ata4.00: BMDMA stat 0x26 [ 81.691246] ata4.00: failed command: READ DMA EXT [ 81.691272] ata4.00: cmd 25/00:80:38:47:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 81.691345] ata4.00: status: { DRDY ERR } [ 81.691365] ata4.00: error: { ICRC ABRT } [ 81.691390] ata4: soft resetting link [ 81.860230] ata4.00: configured for UDMA/33 [ 81.860238] ata4: EH complete [ 81.881734] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 81.881772] ata4.00: BMDMA stat 0x26 [ read_dma udma icrc error 81.881792] ata4.00: failed command: READ DMA EXT [ 81.881819] ata4.00: cmd 25/00:80:b8:4a:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 81.881891] ata4.00: status: { DRDY ERR } [ 81.881911] ata4.00: error: { ICRC ABRT } [ 81.881937] ata4: soft resetting link [ 82.052227] ata4.00: configured for UDMA/33 [ 82.052236] ata4: EH complete [ 82.069343] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 read_dma udma icrc error 82.070611] ata4.00: BMDMA stat 0x26 [ 82.071873] ata4.00: failed command: READ DMA EXT [ 82.073131] ata4.00: cmd 25/00:80:b8:4a:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 82.075667] ata4.00: status: { DRDY ERR } [ 82.076940] ata4.00: error: { ICRC ABRT } [ 82.078199] ata4: soft resetting link [ 82.248228] ata4.00: configured for UDMA/33 [ 82.248235] ata4: EH complete [ 82.268951] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 82.270236] ata4.00: BMDMA stat 0x26 [ 82.271504] ata4.00: failed command: READ DMA EXT [ read_dma udma icrc error ata4.00: cmd 25/00:80:b8:4b:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 82.275295] ata4.00: status: { DRDY ERR } [ 82.276526] ata4.00: error: { ICRC ABRT } [ read_dma udma icrc error 82.277744] ata4: soft resetting link [ 82.448233] ata4.00: configured for UDMA/33 [ 82.448241] ata4: EH complete [ 82.468970] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 82.470217] ata4.00: BMDMA stat 0x26 [ 82.471439] ata4.00: failed command: READ DMA EXT [ 82.472674] ata4.00: cmd 25/00:80:38:4d:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 82.475144] ata4.00: status: { DRDY ERR } [ 82.476389] ata4.00: error: { ICRC ABRT } [ 82.477599] ata4: soft resetting link [ 82.648229] ata4.00: configured for UDMA/33 [ 82.648239] ata4: EH complete [ 82.670440] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 82.670479] ata4.00: BMDMA stat 0x26 [ 82.670500] ata4.00: failed command: READ DMA EXT [ 82.670527] ata4.00: cmd 25/00:80:38:50:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 82.670599] ata4.00: status: { DRDY ERR } [ 82.670619] ata4.00: error: { ICRC ABRT } [ 82.670646] ata4: soft resetting link [ 82.840230] ata4.00: configured for UDMA/33 [ 82.840239] ata4: EH complete [ 82.857524] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 82.857556] ata4.00: BMDMA stat 0x26 [ 82.857575] ata4.00: failed command: READ DMA EXT [ 82.857601] ata4.00: cmd 25/00:80:38:50:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 82.857674] ata4.00: status: { DRDY ERR } [ 82.857694] ata4.00: error: { ICRC ABRT } [ 82.857718] ata4: soft resetting link [ 83.028230] ata4.00: configured for UDMA/33 [ 83.028237] ata4: EH complete [ 83.047464] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 83.047501] ata4.00: BMDMA stat 0x26 [ 83.047521] ata4.00: failed command: READ DMA EXT [ 83.047547] ata4.00: cmd 25/00:80:38:52:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 83.047620] ata4.00: status: { DRDY ERR } [ 83.047640] ata4.00: error: { ICRC ABRT } [ 83.047666] ata4: soft resetting link [ 83.216230] ata4.00: configured for UDMA/33 [ 83.216238] ata4: EH complete [ 83.236965] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 83.238251] ata4.00: BMDMA stat 0x26 [ 83.239507] ata4.00: failed command: READ DMA EXT [ 83.240771] ata4.00: cmd 25/00:80:b8:52:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 83.243280] ata4.00: status: { DRDY ERR } [ 83.244495] ata4.00: error: { ICRC ABRT } system configuration data read error acer 83.245692] ata4: soft resetting link [ 83.416231] ata4.00: configured for UDMA/33 [ 83.416239] ata4: EH complete [ 83.436273] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 83.437501] ata4.00: BMDMA stat 0x26 [ 83.438701] ata4.00: failed command: READ DMA EXT [ 83.439895] ata4.00: cmd 25/00:80:38:53:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 83.442334] ata4.00: status: { DRDY ERR } [ 83.443545] ata4.00: error: { ICRC ABRT } [ 83.444753] ata4: soft resetting link [ 83.616229] ata4.00: configured read_dma udma icrc error UDMA/33 [ 83.616237] ata4: EH complete [ 83.636045] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 83.636082] ata4.00: BMDMA stat 0x26 [ 83.636101] ata4.00: failed command: READ DMA EXT [ 83.636128] ata4.00: cmd 25/00:80:38:54:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 83.636200] ata4.00: status: { DRDY ERR } [ 83.636220] ata4.00: error: { ICRC ABRT } [ 83.636245] ata4: soft resetting link [ 83.808235] ata4.00: configured for UDMA/33 [ 83.808243] ata4: EH complete [ 83.825513] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 83.825551] ata4.00: BMDMA stat 0x26 [ 83.825571] ata4.00: failed command: READ DMA EXT [ 83.825597] ata4.00: cmd 25/00:80:38:56:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 83.825669] ata4.00: status: { DRDY ERR } [ 83.825689] ata4.00: error: { ICRC ABRT } [ 83.825715] ata4: soft resetting link [ 83.996231] ata4.00: configured for UDMA/33 [ 83.996240] ata4: EH complete [ 84.014566] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 84.014604] ata4.00: BMDMA stat 0x26 [ 84.014624] ata4.00: failed command: READ DMA EXT [ 84.014651] ata4.00: cmd 25/00:80:38:58:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 84.014724] ata4.00: status: { DRDY ERR } [ 84.014744] ata4.00: error: { ICRC ABRT } [ 84.014770] ata4: soft resetting link [ 84.184229] ata4.00: configured for UDMA/33 [ 84.184237] ata4: EH complete [ 84.203370] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 84.204633] ata4.00: BMDMA stat 0x26 [ 84.205886] ata4.00: failed command: READ DMA EXT [ 84.207133] ata4.00: cmd 25/00:80:b8:59:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 84.209661] ata4.00: status: { DRDY ERR } [ 84.210921] ata4.00: error: { ICRC ABRT } [ 84.212180] ata4: soft resetting link [ 84.384232] ata4.00: configured for UDMA/33 [ 84.384241] ata4: EH complete [ 84.403531] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 84.404817] ata4.00: BMDMA stat 0x26 [ 84.406072] ata4.00: failed command: READ DMA EXT [ 84.407318] ata4.00: cmd 25/00:80:38:5b:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 84.409812] ata4.00: status: { DRDY ERR } [ 84.411016] ata4.00: error: { ICRC ABRT } [ 84.412214] ata4: soft resetting link [ 84.584230] ata4.00: configured for UDMA/33 [ 84.584239] ata4: EH complete [ 84.602015] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 84.602047] ata4.00: BMDMA stat 0x26 [ 84.602067] ata4.00: failed command: READ DMA EXT [ 84.602093] ata4.00: cmd 25/00:80:38:5b:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 84.602165] ata4.00: status: { DRDY ERR } [ 84.602185] ata4.00: error: { ICRC ABRT } [ 84.602210] ata4: soft resetting link [ 84.772228] ata4.00: configured for UDMA/33 [ 84.772234] ata4: EH complete [ 84.789907] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 84.789939] ata4.00: BMDMA stat 0x26 [ 84.789958] ata4.00: failed command: READ DMA EXT [ 84.789984] ata4.00: cmd 25/00:80:38:5b:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 84.790056] ata4.00: status: { DRDY ERR } [ 84.790076] ata4.00: error: { ICRC ABRT } [ 84.790100] ata4: soft resetting link [ 84.960233] ata4.00: configured for UDMA/33 [ 84.960239] ata4: EH complete [ 84.978827] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 84.978863] ata4.00: BMDMA stat 0x26 [ 84.978883] ata4.00: failed command: READ DMA EXT [ 84.978909] ata4.00: cmd 25/00:80:38:5c:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 84.978981] ata4.00: status: { DRDY ERR } [ 84.979001] ata4.00: error: { ICRC ABRT } [ 84.979026] ata4: soft resetting link [ 85.148227] ata4.00: configured for UDMA/33 [ 85.148235] ata4: EH complete [ 85.168473] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 85.169742] ata4.00: BMDMA stat 0x26 [ 85.170987] ata4.00: failed command: READ DMA EXT [ 85.172242] ata4.00: cmd 25/00:80:b8:5e:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 85.174750] ata4.00: status: { DRDY ERR } [ 85.176014] ata4.00: error: { ICRC ABRT } [ 85.177263] ata4: soft resetting link [ 85.348228] ata4.00: configured for UDMA/33 [ 85.348236] ata4: EH complete [ 85.367287] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 85.368569] ata4.00: BMDMA stat 0x26 [ 85.369831] ata4.00: failed command: READ DMA EXT [ 85.371074] ata4.00: cmd 25/00:80:38:5f:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 85.373567] ata4.00: status: { DRDY ERR } [ 85.374777] ata4.00: error: { ICRC ABRT } [ 85.375972] ata4: soft resetting link [ 85.548227] ata4.00: configured for UDMA/33 [ read_dma udma icrc error ata4: EH complete [ 85.566148] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 85.566181] ata4.00: BMDMA stat 0x26 [ 85.566201] ata4.00: failed command: READ DMA EXT [ 85.566227] ata4.00: cmd 25/00:80:38:5f:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 85.566299] ata4.00: status: { DRDY ERR } [ 85.566319] ata4.00: error: { ICRC ABRT } [ 85.566344] ata4: soft resetting link [ 85.736229] ata4.00: configured for UDMA/33 [ 85.736235] ata4: EH complete [ 85.753617] ata4.00: exception Emask 0x0 Read_dma udma icrc error 0x0 SErr 0x0 action 0x6 [ 85.753649] ata4.00: BMDMA stat 0x26 [ 85.753668] ata4.00: failed command: READ DMA EXT [ 85.753694] ata4.00: cmd 25/00:80:38:5f:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 85.753766] ata4.00: status: { DRDY ERR } [ 85.753786] ata4.00: error: { ICRC ABRT } [ 85.753810] ata4: soft resetting link [ 85.924233] ata4.00: configured for UDMA/33 [ 85.924239] ata4: EH complete [ 85.944628] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 85.944665] ata4.00: BMDMA stat 0x26 [ 85.944684] ata4.00: failed command: READ DMA EXT [ 85.944711] read_dma udma icrc error cmd 25/00:80:b8:60:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 85.944784] ata4.00: status: { DRDY ERR } [ 85.944804] ata4.00: error: { ICRC ABRT } [ 85.944829] ata4: soft resetting link [ 86.116229] ata4.00: configured for UDMA/33 [ 86.116237] ata4: EH complete [ 86.132758] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 86.134029] ata4.00: BMDMA stat 0x26 [ 86.135279] ata4.00: failed command: READ DMA EXT [ 86.136536] ata4.00: cmd 25/00:80:38:61:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 86.139054] ata4.00: status: { DRDY ERR } [ 86.140325] ata4.00: error: { ICRC ABRT } [ 86.141582] ata4: soft resetting link [ 86.312227] ata4.00: configured for UDMA/33 [ 86.312235] ata4: EH complete [ 86.331551] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 86.332838] ata4.00: BMDMA stat 0x26 [ 86.334105] ata4.00: failed command: READ DMA EXT [ 86.335365] ata4.00: cmd 25/00:80:38:61:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 86.337888] ata4.00: status: { DRDY ERR } [ 86.339115] ata4.00: error: { ICRC ABRT } [ 86.340335] ata4: soft resetting link [ 86.512226] ata4.00: configured for UDMA/33 [ 86.512233] ata4: EH complete [ 86.533230] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 86.533269] ata4.00: BMDMA stat 0x26 [ 86.533289] ata4.00: failed command: READ DMA EXT [ 86.533316] ata4.00: cmd 25/00:80:38:64:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 86.533388] ata4.00: status: { DRDY ERR } [ 86.533408] ata4.00: error: { ICRC ABRT } [ 86.533435] ata4: soft resetting link [ 86.704230] ata4.00: configured for UDMA/33 [ 86.704239] ata4: EH complete [ 86.721228] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 86.721264] ata4.00: BMDMA stat 0x26 [ 86.721284] ata4.00: failed command: READ DMA EXT [ 86.721310] ata4.00: cmd 25/00:80:38:65:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 86.721383] ata4.00: status: { DRDY ERR } [ 86.721403] ata4.00: error: { ICRC ABRT } [ 86.721428] ata4: soft resetting link [ 86.892227] ata4.00: configured for UDMA/33 [ 86.892236] ata4: EH complete [ 86.909920] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 86.909955] ata4.00: BMDMA stat 0x26 [ 86.909975] ata4.00: failed command: READ DMA EXT [ 86.910002] ata4.00: cmd 25/00:80:38:66:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 86.910074] ata4.00: status: { DRDY ERR } [ 86.910094] ata4.00: error: { ICRC ABRT } [ 86.910119] ata4: soft resetting link [ 87.080227] ata4.00: configured for UDMA/33 [ 87.080235] ata4: EH complete [ 87.098464] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 87.099754] ata4.00: BMDMA stat 0x26 [ 87.101037] ata4.00: failed command: READ DMA EXT [ 87.102306] ata4.00: cmd 25/00:80:38:67:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 87.104872] ata4.00: status: { DRDY ERR } [ 87.106157] ata4.00: error: { ICRC ABRT } [ 87.107412] ata4: soft resetting link [ 87.276228] ata4.00: configured for UDMA/33 [ 87.276237] ata4: EH complete [ 87.285950] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 87.287225] ata4.00: BMDMA stat 0x26 [ 87.288492] ata4.00: failed command: READ DMA EXT [ 87.289747] ata4.00: cmd 25/00:80:38:67:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 87.292252] ata4.00: status: { DRDY ERR } [ 87.293467] ata4.00: error: { ICRC ABRT } [ 87.294665] ata4: soft resetting link [ 87.464230] ata4.00: configured for UDMA/33 [ 87.464237] ata4: EH complete [ 87.474757] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 87.475982] ata4.00: BMDMA stat 0x26 [ 87.477197] ata4.00: failed command: READ DMA EXT [ 87.478397] ata4.00: cmd 25/00:80:38:68:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 87.480823] ata4.00: status: { DRDY ERR } [ 87.482035] ata4.00: error: { ICRC ABRT } [ 87.483253] read_dma udma icrc error soft resetting link [ 87.652227] ata4.00: configured for UDMA/33 [ 87.652236] ata4: EH complete [ 87.662984] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 87.663019] ata4.00: BMDMA stat 0x26 [ 87.663039] ata4.00: failed command: READ DMA EXT [ 87.663065] ata4.00: cmd 25/00:80:b8:68:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 87.663138] ata4.00: status: { DRDY ERR } [ 87.663158] ata4.00: error: { ICRC ABRT } [ 87.663183] ata4: soft resetting link [ 87.832230] ata4.00: configured for UDMA/33 [ 87.832237] ata4: EH complete [ 87.850973] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 87.851006] ata4.00: BMDMA stat 0x26 [ 87.851025] ata4.00: failed command: READ DMA EXT [ 87.851051] ata4.00: cmd 25/00:80:38:69:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 87.851123] ata4.00: status: { DRDY ERR } [ 87.851143] ata4.00: error: { ICRC ABRT } [ 87.851168] ata4: soft resetting link [ 88.020229] ata4.00: configured for UDMA/33 [ 88.020236] ata4: EH complete [ 88.038461] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 88.038492] ata4.00: BMDMA stat 0x26 [ 88.038511] ata4.00: failed command: READ DMA EXT [ 88.038538] ata4.00: cmd 25/00:80:38:69:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 88.038609] ata4.00: status: { DRDY ERR } [ 88.038629] ata4.00: error: { ICRC ABRT } [ 88.038654] ata4: soft resetting link [ 88.208228] ata4.00: configured for UDMA/33 [ 88.208234] ata4: EH complete [ 88.228327] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 88.229581] ata4.00: BMDMA stat 0x26 [ 88.230826] ata4.00: failed command: READ DMA EXT [ 88.232077] ata4.00: cmd 25/00:80:38:6b:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 88.234564] ata4.00: status: { DRDY ERR } [ 88.235765] ata4.00: error: { ICRC ABRT } [ 88.236959] ata4: soft resetting link [ 88.408231] ata4.00: configured for UDMA/33 [ 88.408240] ata4: EH complete [ 88.426667] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 88.427875] ata4.00: BMDMA stat 0x26 [ 88.429075] ata4.00: failed command: READ DMA EXT [ 88.430264] ata4.00: cmd 25/00:80:38:6b:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 88.432670] ata4.00: status: { DRDY ERR } [ 88.433872] ata4.00: error: { ICRC ABRT } [ 88.435065] ata4: soft resetting link [ 88.604226] ata4.00: configured for UDMA/33 [ 88.604233] ata4: EH complete [ 88.615643] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 88.615680] ata4.00: BMDMA stat 0x26 [ 88.615700] ata4.00: failed command: READ DMA EXT [ 88.615727] ata4.00: cmd 25/00:80:38:6c:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 88.615799] ata4.00: status: { DRDY ERR } [ 88.615819] ata4.00: error: { ICRC ABRT } [ 88.615845] ata4: soft resetting link [ 88.784228] ata4.00: configured for UDMA/33 [ 88.784236] ata4: EH complete [ 88.803064] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 88.803096] ata4.00: BMDMA stat 0x26 [ 88.803115] ata4.00: failed command: READ DMA EXT [ 88.803142] ata4.00: cmd 25/00:80:38:6c:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 88.803214] ata4.00: status: { DRDY ERR } [ 88.803234] ata4.00: error: { ICRC ABRT } [ 88.803259] ata4: soft resetting link [ 88.972235] ata4.00: configured for UDMA/33 [ 88.972242] ata4: EH complete [ 88.991818] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 88.991854] ata4.00: BMDMA stat 0x26 [ 88.991873] ata4.00: failed command: READ DMA EXT [ 88.991900] ata4.00: cmd 25/00:80:38:6d:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 88.991973] ata4.00: status: { DRDY ERR } [ 88.991993] ata4.00: error: { ICRC ABRT } [ 88.992026] ata4: soft resetting link [ 89.164231] ata4.00: configured for UDMA/33 [ 89.164238] ata4: EH complete [ dll error amplitube 3 89.180492] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 89.181756] ata4.00: BMDMA stat 0x26 [ 89.183000] ata4.00: failed command: READ DMA EXT [ 89.184252] ata4.00: cmd 25/00:80:b8:6d:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 89.186763] ata4.00: status: { DRDY ERR } [ read_dma udma icrc error 89.188026] ata4.00: error: { ICRC ABRT } [ 89.189275] ata4: soft resetting link [ 89.360231] ata4.00: configured for UDMA/33 [ 89.360238] ata4: EH complete [ 89.382862] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 89.384150] ata4.00: BMDMA stat 0x26 [ 89.385403] ata4.00: failed command: READ DMA EXT [ 89.386654] ata4.00: cmd 25/00:80:b8:70:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 89.389156] ata4.00: status: { DRDY ERR } [ 89.390370] ata4.00: error: { ICRC ABRT } [ 89.391568] ata4: soft resetting link [ 89.560227] ata4.00: configured for UDMA/33 [ 89.560237] ata4: EH complete [ 89.572277] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 89.572316] ata4.00: BMDMA stat 0x26 [ 89.572336] ata4.00: failed command: READ DMA EXT [ 89.572363] ata4.00: cmd 25/00:80:b8:72:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 89.572435] ata4.00: status: { DRDY ERR } [ 89.572455] ata4.00: error: { ICRC ABRT } [ 89.572480] ata4: soft resetting link [ 89.744228] ata4.00: configured for UDMA/33 [ 89.744237] ata4: EH complete [ 89.760236] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 89.760269] ata4.00: BMDMA stat 0x26 [ 89.760289] ata4.00: failed command: READ DMA EXT [ 89.760315] ata4.00: cmd 25/00:80:38:73:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 89.760387] ata4.00: status: { DRDY ERR } [ 89.760407] ata4.00: error: { ICRC ABRT } [ 89.760432] ata4: soft resetting link [ 89.932229] ata4.00: configured for UDMA/33 [ 89.932236] ata4: EH complete [ 89.948640] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 89.948675] ata4.00: BMDMA stat 0x26 [ 89.948694] ata4.00: failed command: READ DMA EXT [ 89.948721] ata4.00: cmd 25/00:80:b8:73:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 89.948793] ata4.00: status: { DRDY ERR } [ 89.948813] ata4.00: error: { ICRC ABRT } [ 89.948838] ata4: soft resetting link [ 90.120230] ata4.00: configured for UDMA/33 [ 90.120237] ata4: EH complete [ 90.135936] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 90.137215] ata4.00: BMDMA stat 0x26 [ 90.138469] ata4.00: failed command: READ DMA EXT [ 90.139719] ata4.00: cmd 25/00:80:b8:73:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 90.142250] ata4.00: status: { DRDY ERR } [ 90.143518] ata4.00: error: { ICRC ABRT } [ 90.144781] ata4: soft resetting link [ 90.316230] ata4.00: configured for UDMA/33 [ 90.316237] ata4: EH complete [ 90.339483] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 90.340782] ata4.00: BMDMA stat 0x26 [ read_dma udma icrc error 90.342051] ata4.00: failed command: READ DMA EXT [ 90.343312] ata4.00: cmd 25/00:80:38:79:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 90.345837] ata4.00: status: { DRDY ERR } [ 90.347068] ata4.00: error: { ICRC ABRT } [ 90.348292] ata4: soft resetting link [ 90.520232] ata4.00: configured for UDMA/33 [ 90.520241] ata4: EH complete [ 90.538997] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 90.539034] ata4.00: BMDMA stat 0x26 [ 90.539054] ata4.00: failed command: READ DMA EXT [ 90.539081] ata4.00: cmd 25/00:80:38:7a:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 90.539153] ata4.00: status: { DRDY ERR } [ 90.539173] ata4.00: error: { ICRC ABRT } [ 90.539199] ata4: soft resetting link [ 90.708229] ata4.00: configured for UDMA/33 [ 90.708236] ata4: EH complete [ there some errors 90.727097] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 90.727132] ata4.00: BMDMA stat 0x26 [ 90.727151] ata4.00: failed command: READ DMA EXT [ 90.727178] ata4.00: cmd 25/00:80:b8:7a:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 90.727250] ata4.00: status: { DRDY ERR } [ 90.727270] ata4.00: error: { ICRC ABRT } [ 90.727295] ata4: soft resetting link [ 90.896230] ata4.00: configured for UDMA/33 [ 90.896238] ata4: EH complete [ 90.918550] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 90.918586] ata4.00: BMDMA stat 0x26 [ 90.918607] ata4.00: failed command: READ DMA EXT [ 90.918633] ata4.00: cmd 25/00:80:38:7d:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 90.918706] ata4.00: status: { DRDY ERR } [ 90.918726] ata4.00: error: { ICRC ABRT } [ 90.918751] ata4: soft resetting link [ 91.088228] ata4.00: configured for UDMA/33 [ 91.088236] ata4: EH complete [ 91.107455] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 91.108760] ata4.00: BMDMA stat 0x26 [ 91.110034] ata4.00: failed command: READ DMA EXT [ 91.111305] ata4.00: cmd 25/00:80:b8:7e:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 91.113874] ata4.00: status: { DRDY ERR } [ 91.115160] ata4.00: error: { ICRC ABRT } [ 91.116428] ata4: soft resetting link [ 91.288233] ata4.00: configured for UDMA/33 [ 91.288241] ata4: EH complete [ 91.307531] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 91.308834] ata4.00: BMDMA stat 0x26 [ 91.310094] ata4.00: failed command: READ DMA EXT [ 91.311345] ata4.00: cmd 25/00:80:38:80:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 91.313849] ata4.00: status: { DRDY ERR } [ 91.315064] ata4.00: error: { ICRC ABRT } [ 91.316272] ata4: soft resetting link [ 91.488229] ata4.00: configured for UDMA/33 [ 91.488237] ata4: EH complete [ 91.506180] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 91.506213] ata4.00: BMDMA stat 0x26 [ 91.506232] ata4.00: failed command: READ DMA EXT [ 91.506258] ata4.00: cmd 25/00:80:38:80:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 91.506331] ata4.00: status: { DRDY ERR } [ 91.506350] ata4.00: error: { ICRC ABRT } [ read_dma udma icrc error ata4: soft resetting link [ 91.676228] ata4.00: configured for UDMA/33 [ 91.676234] ata4: EH complete [ 91.693899] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 91.693931] ata4.00: BMDMA stat 0x26 [ 91.693950] ata4.00: failed command: READ DMA EXT [ 91.693977] ata4.00: cmd 25/00:80:38:80:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 91.694049] ata4.00: status: { DRDY ERR } [ 91.694069] ata4.00: error: { ICRC ABRT } [ 91.694093] ata4: soft resetting link [ 91.864227] ata4.00: configured read_dma udma icrc error UDMA/33 [ 91.864233] ata4: EH complete [ 91.882810] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 91.882846] ata4.00: BMDMA stat 0x26 [ 91.882865] ata4.00: failed command: READ DMA EXT [ 91.882892] ata4.00: cmd 25/00:80:38:81:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 91.882965] ata4.00: status: { DRDY ERR } [ 91.882984] ata4.00: error: { ICRC ABRT } [ 91.883010] ata4: soft resetting link [ 92.052228] ata4.00: configured for UDMA/33 [ 92.052236] ata4: EH complete [ 92.072204] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 92.073456] ata4.00: BMDMA stat 0x26 [ 92.074704] ata4.00: error 7 hasp hl key command: READ DMA EXT [ 92.075949] ata4.00: cmd 25/00:80:38:83:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 92.078478] ata4.00: status: { DRDY ERR } [ 92.079740] ata4.00: error: { ICRC ABRT } [ 92.081006] ata4: soft resetting link [ 92.252229] ata4.00: configured for UDMA/33 [ 92.252238] ata4: EH complete [ 92.271633] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 92.272925] ata4.00: BMDMA stat 0x26 [ 92.274181] ata4.00: failed command: READ DMA EXT [ 92.275433] ata4.00: cmd 25/00:80:38:84:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 92.277935] ata4.00: status: { DRDY ERR } [ 92.279144] ata4.00: error: { ICRC ABRT } [ 92.280345] ata4: soft resetting link [ 92.452238] ata4.00: configured for UDMA/33 [ 92.452246] ata4: EH complete [ 92.470901] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 92.472131] ata4.00: BMDMA stat 0x26 [ 92.473340] ata4.00: failed command: READ DMA EXT [ 92.474534] ata4.00: cmd 25/00:80:b8:84:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 92.476953] ata4.00: status: { DRDY ERR } [ 92.478163] ata4.00: error: { ICRC ABRT } [ 92.479364] ata4: soft resetting link [ 92.648230] ata4.00: configured for UDMA/33 [ 92.648239] ata4: EH complete [ 92.658390] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 92.658422] ata4.00: BMDMA stat 0x26 [ 92.658441] ata4.00: failed command: READ DMA EXT [ 92.658468] ata4.00: cmd 25/00:80:b8:84:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 92.658540] ata4.00: status: { DRDY ERR } [ 92.658560] ata4.00: error: { ICRC ABRT } [ 92.658584] ata4: soft resetting link [ 92.828230] ata4.00: configured for UDMA/33 [ 92.828237] ata4: EH complete [ 92.847056] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 92.847092] ata4.00: BMDMA stat 0x26 [ 92.847111] ata4.00: failed command: READ DMA EXT [ 92.847138] ata4.00: cmd 25/00:80:b8:85:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 92.847211] ata4.00: status: { DRDY ERR } [ 92.847231] ata4.00: error: { ICRC ABRT } [ 92.847256] ata4: soft resetting link [ 93.016229] ata4.00: configured for UDMA/33 [ 93.016236] ata4: EH complete [ 93.034985] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 93.035019] ata4.00: BMDMA stat 0x26 [ 93.035038] ata4.00: failed command: READ DMA EXT [ 93.035065] ata4.00: cmd 25/00:80:38:86:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 93.035137] ata4.00: status: { DRDY ERR } [ 93.035157] ata4.00: error: { ICRC ABRT } [ 93.035182] ata4: soft resetting link [ 93.204227] ata4.00: configured for UDMA/33 [ 93.204235] ata4: EH complete [ 93.222737] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 93.224014] ata4.00: BMDMA stat 0x26 [ 93.225260] ata4.00: failed command: READ DMA EXT [ 93.226501] ata4.00: cmd 25/00:80:38:86:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 93.228988] ata4.00: status: { DRDY ERR } [ 93.230195] ata4.00: error: { ICRC ABRT } [ 93.231387] ata4: soft resetting link [ 93.400227] ata4.00: configured for UDMA/33 [ 93.400234] ata4: EH complete [ 93.411182] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 93.412414] ata4.00: BMDMA stat 0x26 [ 93.413617] ata4.00: failed command: READ DMA EXT [ 93.414817] ata4.00: cmd 25/00:80:b8:86:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 93.417253] ata4.00: status: { DRDY ERR } [ 93.418464] ata4.00: error: { ICRC ABRT } [ 93.419671] ata4: soft resetting link [ 93.588231] ata4.00: configured for UDMA/33 [ 93.588239] ata4: EH complete [ 93.599454] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 93.599491] ata4.00: BMDMA stat 0x26 [ 93.599510] ata4.00: failed command: READ DMA EXT [ 93.599537] ata4.00: cmd 25/00:80:b8:87:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 93.599609] ata4.00: status: { DRDY ERR } [ 93.599629] ata4.00: error: { ICRC ABRT } [ 93.599654] ata4: soft resetting link [ 93.768229] ata4.00: configured for UDMA/33 [ 93.768237] ata4: EH complete [ 93.786948] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 93.786980] ata4.00: BMDMA stat 0x26 [ 93.786999] ata4.00: failed command: READ DMA EXT [ 93.787025] ata4.00: cmd 25/00:80:b8:87:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 93.787097] ata4.00: status: { DRDY ERR } [ 93.787117] ata4.00: error: { ICRC ABRT } [ 93.787142] ata4: soft resetting link [ 93.956227] ata4.00: configured for UDMA/33 [ 93.956233] ata4: EH complete [ 93.974838] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 93.974870] ata4.00: BMDMA stat 0x26 [ 93.974889] ata4.00: failed command: READ DMA EXT [ 93.974915] ata4.00: cmd 25/00:80:b8:87:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 93.974988] ata4.00: status: { DRDY ERR } [ 93.975007] ata4.00: error: { ICRC ABRT } [ 93.975032] ata4: soft resetting link [ 94.144227] ata4.00: configured for UDMA/33 [ 94.144233] ata4: EH complete [ 94.165717] ata4.00: exception Emask 0x0 SAct read_dma udma icrc error SErr 0x0 action 0x6 [ 94.167007] ata4.00: BMDMA stat 0x26 [ 94.168284] ata4.00: failed command: READ DMA EXT [ 94.169549] ata4.00: cmd 25/00:80:b8:8a:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 94.172112] ata4.00: status: { DRDY ERR } [ 94.173394] ata4.00: error: { ICRC ABRT } [ 94.174671] ata4: soft resetting link [ 94.344236] ata4.00: configured for UDMA/33 [ 94.344245] ata4: EH complete [ 94.366375] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 94.367677] ata4.00: BMDMA stat 0x26 [ 94.368975] ata4.00: failed command: READ DMA EXT [ 94.370254] ata4.00: cmd 25/00:80:b8:8b:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 94.372810] ata4.00: status: { DRDY ERR } [ 94.374052] ata4.00: error: { ICRC ABRT } [ 94.375262] ata4: soft resetting link [ 94.544227] ata4.00: configured for UDMA/33 [ 94.544236] ata4: EH complete [ 94.554620] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 94.554654] ata4.00: BMDMA stat 0x26 [ 94.554674] ata4.00: failed command: READ DMA EXT [ 94.554700] ata4.00: cmd 25/00:80:38:8c:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 94.554773] ata4.00: status: { DRDY ERR } [ 94.554793] ata4.00: error: { ICRC ABRT } [ 94.554818] ata4: soft resetting link [ 94.724231] ata4.00: configured for UDMA/33 [ 94.724238] ata4: EH complete [ 94.742135] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 94.742167] ata4.00: BMDMA stat 0x26 [ 94.742186] ata4.00: failed command: READ DMA EXT [ 94.742213] ata4.00: cmd 25/00:80:38:8c:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 94.742285] ata4.00: status: { DRDY ERR } [ 94.742305] ata4.00: error: { ICRC ABRT } [ 94.742329] ata4: soft resetting link [ 94.912229] ata4.00: configured for UDMA/33 [ 94.912236] ata4: EH complete [ 94.931317] ata4.00: exception Emask read_dma udma icrc error SAct 0x0 SErr 0x0 action 0x6 [ 94.931352] ata4.00: BMDMA stat 0x26 [ 94.931372] ata4.00: failed command: READ DMA EXT [ 94.931398] ata4.00: cmd 25/00:80:38:8d:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 94.931471] ata4.00: status: { DRDY ERR } [ 94.931490] ata4.00: error: { ICRC ABRT } [ 94.931515] ata4: soft resetting link [ 95.100229] ata4.00: configured for MWDMA2 [ 95.100237] ata4: EH complete [ 95.118474] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 95.119760] ata4.00: BMDMA stat 0x26 [ 95.121028] ata4.00: failed command: READ DMA EXT [ 95.122283] ata4.00: cmd 25/00:80:38:8d:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 95.124836] ata4.00: status: { DRDY ERR } [ 95.126104] ata4.00: error: { ICRC ABRT } [ 95.127363] ata4: soft resetting link [ 95.296227] ata4.00: configured for MWDMA2 [ 95.296233] ata4: EH read_dma udma icrc error [ 95.307009] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 95.308300] ata4.00: BMDMA stat 0x26 [ read_dma udma icrc error ata4.00: failed command: READ DMA EXT [ 95.310825] ata4.00: cmd 25/00:80:b8:8d:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 95.313350] ata4.00: status: { DRDY ERR } [ 95.314568] ata4.00: error: { ICRC ABRT } [ 95.315774] ata4: soft resetting link [ 95.484743] ata4.00: configured for MWDMA2 [ 95.484751] ata4: EH complete [ 95.495441] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 95.495479] ata4.00: BMDMA stat 0x26 [ error e13 en canon mp190 95.495498] ata4.00: failed command: READ DMA EXT [ 95.495525] ata4.00: cmd read_dma udma icrc error tag 0 dma 65536 in [ 95.495597] ata4.00: status: { DRDY ERR } [ 95.495617] ata4.00: error: { ICRC ABRT } [ 95.495643] ata4: soft resetting link [ 95.664229] ata4.00: configured for MWDMA2 [ 95.664237] ata4: EH complete [ 95.683568] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 95.683601] ata4.00: BMDMA stat 0x26 [ 95.683621] ata4.00: failed command: READ DMA EXT [ 95.683647] ata4.00: cmd 25/00:80:38:8f:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 95.683719] ata4.00: status: { DRDY ERR } [ 95.683739] ata4.00: error: { ICRC ABRT } [ 95.683763] ata4: soft resetting link [ 95.852229] ata4.00: configured for MWDMA2 [ 95.852236] ata4: EH complete [ 95.871131] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 95.871163] ata4.00: BMDMA stat 0x26 [ 95.871182] ata4.00: failed command: READ DMA EXT [ 95.871209] ata4.00: cmd 25/00:80:38:8f:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 95.871281] ata4.00: status: { DRDY ERR } [ 95.871301] ata4.00: error: { ICRC ABRT } [ 95.871326] ata4: soft resetting link [ 96.040228] ata4.00: configured for MWDMA2 [ 96.040235] ata4: EH complete [ 96.061464] read_dma udma icrc error exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 96.062714] ata4.00: BMDMA stat 0x26 [ 96.063963] ata4.00: failed command: READ DMA EXT [ 96.065222] ata4.00: cmd 25/00:80:b8:91:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 96.067735] ata4.00: status: { DRDY ERR } [ 96.069006] ata4.00: error: { ICRC ABRT } [ read_dma udma icrc error 96.070260] ata4: soft resetting link [ 96.240231] ata4.00: configured for MWDMA2 read_dma udma icrc error 96.240241] ata4: EH complete [ 96.262789] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 96.264082] ata4.00: BMDMA stat 0x26 [ 96.265340] ata4.00: failed command: READ DMA EXT [ 96.266591] ata4.00: cmd 25/00:80:38:95:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 96.269090] ata4.00: status: { DRDY ERR } [ 96.270299] ata4.00: error: { B-sx4t ribbon error ABRT } [ 96.271496] ata4: soft resetting link [ 96.440232] ata4.00: configured for MWDMA2 [ 96.440241] ata4: EH complete [ 96.451714] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 96.452945] ata4.00: BMDMA stat 0x26 [ 96.454143] ata4.00: failed command: READ DMA EXT [ 96.455341] ata4.00: cmd 25/00:80:b8:96:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 96.457768] ata4.00: status: { DRDY ERR } [ 96.458978] ata4.00: error: { ICRC ABRT } [ 96.460189] ata4: soft resetting link [ 96.632230] ata4.00: configured for MWDMA2 [ 96.632240] ata4: EH complete [ 96.650262] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 96.650296] ata4.00: BMDMA stat 0x26 [ 96.650315] ata4.00: failed command: READ DMA EXT [ 96.650341] ata4.00: cmd 25/00:80:b8:96:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 96.650413] ata4.00: status: { DRDY ERR } [ 96.650433] ata4.00: error: { ICRC ABRT } [ 96.650458] ata4: soft resetting link [ 96.820229] ata4.00: configured for MWDMA2 [ 96.820235] ata4: EH complete [ 96.838842] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 96.838877] ata4.00: BMDMA stat 0x26 [ 96.838897] ata4.00: failed command: READ DMA EXT [ 96.838923] ata4.00: cmd 25/00:80:b8:97:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 96.838996] ata4.00: status: { DRDY ERR } [ 96.839015] ata4.00: error: { ICRC ABRT } [ 96.839040] ata4: soft resetting link [ 97.008228] ata4.00: configured for MWDMA2 [ 97.008236] ata4: EH complete [ 97.026193] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 97.026224] ata4.00: BMDMA stat 0x26 [ 97.026244] ata4.00: failed command: READ DMA EXT [ 97.026270] ata4.00: cmd 25/00:80:b8:97:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 97.026342] ata4.00: status: { DRDY ERR } [ 97.026362] ata4.00: error: { ICRC ABRT } [ 97.026387] ata4: soft resetting link [ 97.196227] ata4.00: configured for MWDMA2 [ 97.196234] ata4: EH complete [ 97.214235] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 97.215499] ata4.00: BMDMA stat 0x26 [ 97.216753] ata4.00: failed command: READ DMA EXT [ 97.217994] ata4.00: cmd 25/00:80:b8:97:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 97.220476] ata4.00: status: { DRDY ERR } [ 97.221683] ata4.00: error: { ICRC ABRT } [ 97.222874] ata4: soft resetting link [ 97.392238] ata4.00: configured for MWDMA2 [ 97.392245] ata4: EH complete [ 97.405393] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 97.406614] ata4.00: BMDMA stat 0x26 [ 97.407809] ata4.00: failed command: READ DMA EXT [ 97.409017] ata4.00: cmd 25/00:80:b8:99:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 97.411431] ata4.00: status: { DRDY ERR } [ 97.412648] ata4.00: error: { ICRC ABRT } [ 97.413856] ata4: soft resetting link [ 97.584230] ata4.00: configured for MWDMA2 [ 97.584240] ata4: EH complete [ 97.593038] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 97.593072] ata4.00: BMDMA stat 0x26 [ 97.593091] ata4.00: failed command: READ DMA EXT [ 97.593117] ata4.00: cmd 25/00:80:b8:99:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 97.593190] ata4.00: status: { DRDY ERR } [ 97.593209] ata4.00: error: { ICRC ABRT } [ 97.593234] ata4: soft resetting link [ 97.764229] ata4.00: configured for MWDMA2 [ 97.764235] ata4: EH complete [ 97.780625] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 97.780657] ata4.00: BMDMA stat 0x26 [ 97.780676] ata4.00: failed command: READ DMA EXT [ 97.780702] ata4.00: cmd 25/00:80:b8:99:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 97.780774] ata4.00: status: { DRDY ERR } [ 97.780794] ata4.00: error: { ICRC ABRT } [ 97.780819] ata4: soft resetting link [ 97.952227] ata4.00: configured for MWDMA2 [ 97.952233] ata4: EH complete [ 97.969628] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 97.969663] ata4.00: BMDMA stat 0x26 [ 97.969683] ata4.00: failed command: READ DMA EXT [ 97.969709] ata4.00: cmd 25/00:80:b8:9a:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 97.969782] ata4.00: status: { DRDY ERR } [ 97.969801] ata4.00: error: { ICRC ABRT } [ 97.969827] ata4: soft resetting link [ 98.140227] ata4.00: configured for MWDMA2 [ 98.140235] ata4: EH complete [ 98.157274] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 98.158554] ata4.00: BMDMA stat 0x26 [ 98.159824] ata4.00: failed command: READ DMA EXT [ 98.161095] ata4.00: cmd 25/00:80:b8:9a:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 98.163644] ata4.00: status: { DRDY ERR } [ 98.164934] ata4.00: error: { ICRC ABRT } [ 98.166206] ata4: soft resetting link [ 98.336226] ata4.00: configured for MWDMA2 [ 98.336233] ata4: EH complete [ encryption error, cannot read certificate.cer ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 98.359006] ata4.00: BMDMA stat 0x26 [ 98.360303] ata4.00: failed command: READ DMA Read_dma udma icrc error [ 98.361576] ata4.00: cmd 25/00:80:b8:9c:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 98.364136] ata4.00: status: read_dma udma icrc error DRDY ERR } [ 98.365374] ata4.00: error: { ICRC ABRT } [ 98.366579] ata4: soft resetting link [ 98.536230] ata4.00: configured for MWDMA2 [ 98.536239] ata4: EH complete [ 98.545713] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 98.545746] ata4.00: BMDMA stat 0x26 [ 98.545766] ata4.00: failed command: READ DMA EXT [ 98.545792] ata4.00: cmd 25/00:80:38:9d:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 98.545864] ata4.00: status: { DRDY ERR } [ 98.545884] ata4.00: error: read_dma udma icrc error ICRC ABRT } [ 98.545909] ata4: soft resetting link [ 98.716232] ata4.00: configured for MWDMA2 [ 98.716240] ata4: EH complete [ 98.733356] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 98.733388] ata4.00: BMDMA stat 0x26 [ 98.733407] ata4.00: failed command: READ DMA EXT [ 98.733433] ata4.00: cmd 25/00:80:38:9d:1d/00:00:1d:00:00/e0 tag 0 dma 65536 read_dma udma icrc error [ 98.733505] ata4.00: status: { DRDY ERR } [ 98.733525] ata4.00: error: { ICRC ABRT } [ 98.733550] ata4: soft resetting link [ 98.904230] ata4.00: configured for MWDMA2 [ 98.904237] ata4: EH complete [ 98.921666] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 98.921701] ata4.00: BMDMA stat 0x26 [ 98.921721] ata4.00: failed command: READ DMA EXT [ 98.921748] ata4.00: cmd 25/00:80:b8:9d:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 98.921820] ata4.00: status: { DRDY ERR } [ 98.921840] ata4.00: error: { ICRC ABRT } [ 98.921865] ata4: soft resetting link [ 99.092228] ata4.00: configured for MWDMA2 [ 99.092236] ata4: EH complete [ 99.109293] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 99.110569] ata4.00: BMDMA stat 0x26 [ 99.111841] ata4.00: failed command: READ DMA EXT [ 99.113106] ata4.00: cmd 25/00:80:b8:9d:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 99.115642] ata4.00: status: { DRDY ERR } [ 99.116924] ata4.00: error: { ICRC ABRT } [ 99.118189] ata4: soft resetting link [ 99.288226] ata4.00: configured for MWDMA2 [ 99.288232] ata4: EH complete [ 99.307883] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 99.309175] ata4.00: BMDMA stat 0x26 [ 99.310441] ata4.00: failed command: READ DMA EXT [ 99.311702] ata4.00: cmd 25/00:80:b8:9d:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 99.314219] ata4.00: status: { DRDY ERR } [ 99.315436] ata4.00: error: { ICRC ABRT } [ 99.316649] ata4: soft resetting link [ 99.488228] ata4.00: configured for MWDMA2 [ 99.488234] ata4: EH complete [ 129.884199] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [ 129.884238] ata4.00: failed command: READ DMA EXT [ 129.884265] ata4.00: cmd 25/00:80:38:a4:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 129.884334] ata4.00: status: { DRDY } [ 134.924037] ata4: link is slow to respond, please be patient (ready=0) [ 139.908038] ata4: device not ready (errno=-16), forcing hardreset [ 139.908045] ata4: soft resetting link [ 143.496229] ata4.00: configured for MWDMA2 [ 143.496240] ata4: EH complete [ 143.501853] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 143.501886] ata4.00: BMDMA stat 0x26 [ 143.501906] ata4.00: failed command: READ DMA EXT [ 143.501933] ata4.00: cmd 25/00:80:38:a4:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 143.502005] ata4.00: status: { DRDY ERR } [ 143.502025] ata4.00: error: { ICRC ABRT } [ 143.502050] ata4: soft resetting link [ 143.672230] ata4.00: configured for MWDMA2 [ 143.672237] ata4: EH complete [ 143.690041] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 143.690076] ata4.00: BMDMA stat 0x26 [ 143.690096] ata4.00: failed command: READ DMA EXT [ 143.690123] ata4.00: cmd 25/00:80:b8:a4:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 143.690195] ata4.00: status: { Read_dma udma icrc error ERR } [ 143.690215] ata4.00: error: { ICRC ABRT } [ 143.690240] ata4: soft resetting link [ 143.860229] ata4.00: configured for MWDMA2 [ 143.860237] ata4: EH complete [ 143.878244] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 143.878278] ata4.00: BMDMA stat 0x26 [ 143.878297] ata4.00: failed command: READ DMA EXT [ 143.878323] ata4.00: cmd 25/00:80:38:a5:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 143.878396] ata4.00: status: { DRDY ERR } [ 143.878415] ata4.00: error: { ICRC ABRT } [ 143.878440] ata4: soft resetting link [ 144.048225] ata4.00: configured for MWDMA2 [ 144.048233] ata4: EH complete [ 144.067177] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 144.068474] ata4.00: BMDMA stat 0x26 [ 144.069737] ata4.00: failed read_dma udma icrc error READ DMA EXT [ 144.070995] ata4.00: cmd 25/00:80:b8:a6:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 144.073540] ata4.00: status: { DRDY ERR } [ 144.074810] ata4.00: error: { ICRC ABRT } [ 144.076078] ata4: soft resetting link [ 144.248229] ata4.00: configured for MWDMA2 [ 144.248238] ata4: EH complete [ 144.269035] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 144.270326] ata4.00: BMDMA bluetooth 10050 error 0x26 [ 144.271593] ata4.00: failed command: READ DMA EXT [ 144.272863] ata4.00: cmd 25/00:80:38:a8:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 144.275373] ata4.00: status: { DRDY ERR } [ 144.276593] ata4.00: error: { ICRC ABRT } [ 144.277796] ata4: read_dma udma icrc error resetting link [ 144.448232] ata4.00: configured for MWDMA2 [ 144.448240] ata4: EH complete [ 144.467803] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 144.469028] ata4.00: BMDMA stat 0x26 [ 144.470235] ata4.00: failed command: READ DMA EXT [ 144.471439] ata4.00: cmd 25/00:80:38:a8:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 144.473882] ata4.00: status: { DRDY ERR } [ 144.475094] ata4.00: error: { ICRC ABRT } [ 144.476304] ata4: soft resetting link [ 144.648227] ata4.00: configured for MWDMA2 [ 144.648234] ata4: EH complete [ 144.666378] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 144.666411] ata4.00: BMDMA stat 0x26 [ 144.666430] ata4.00: failed command: READ DMA EXT [ 144.666456] ata4.00: cmd 25/00:80:38:a8:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 144.666529] ata4.00: status: { DRDY ERR } [ 144.666548] ata4.00: error: { ICRC ABRT } [ 144.666573] ata4: soft resetting link [ 144.836227] ata4.00: configured for MWDMA2 [ 144.836234] ata4: EH complete [ 144.855067] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ read_dma udma icrc error ata4.00: BMDMA stat 0x26 [ 144.855120] ata4.00: failed command: READ DMA EXT [ 144.855147] ata4.00: cmd 25/00:80:b8:a8:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 144.855219] ata4.00: status: { DRDY ERR } [ 144.855239] ata4.00: error: { ICRC ABRT } [ 144.855264] ata4: soft resetting link [ 145.024231] ata4.00: configured for MWDMA2 [ 145.024239] ata4: EH complete [ 145.042381] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 145.042413] ata4.00: BMDMA stat 0x26 [ 145.042432] ata4.00: failed command: READ DMA EXT [ 145.042459] ata4.00: cmd 25/00:80:b8:a8:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 145.042531] ata4.00: status: { DRDY ERR } [ 145.042551] ata4.00: error: { ICRC ABRT } [ 145.042575] ata4: soft resetting link [ 145.212228] ata4.00: configured for MWDMA2 [ 145.212234] ata4: EH complete [ 145.230087] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 145.231377] ata4.00: BMDMA stat 0x26 [ 145.232645] ata4.00: failed command: READ DMA EXT [ 145.233899] ata4.00: cmd 25/00:80:b8:a8:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 145.236402] ata4.00: status: { DRDY ERR } [ 145.237613] ata4.00: error: { ICRC ABRT } [ 145.238809] ata4: soft resetting link [ 145.408225] ata4.00: configured for MWDMA2 [ 145.408232] ata4: EH complete [ 145.420670] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 145.421884] ata4.00: BMDMA stat 0x26 [ 145.423089] ata4.00: failed command: READ DMA EXT [ 145.424300] ata4.00: cmd 25/00:80:b8:ab:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 145.426723] ata4.00: status: { DRDY ERR } [ 145.427939] ata4.00: error: { ICRC ABRT } [ 145.429158] ata4: soft resetting link [ 145.600232] ata4.00: configured for MWDMA2 [ 145.600242] ata4: EH complete [ 145.621289] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 145.621329] ata4.00: BMDMA stat 0x26 [ 145.621349] ata4.00: failed command: READ DMA EXT [ 145.621376] ata4.00: cmd 25/00:80:38:ae:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 145.621448] ata4.00: status: { DRDY ERR } [ 145.621468] ata4.00: error: { ICRC ABRT } [ 145.621495] ata4: soft resetting link [ 145.792230] ata4.00: configured for MWDMA2 [ 145.792238] ata4: EH complete [ 145.809235] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 145.809269] ata4.00: BMDMA stat 0x26 [ 145.809288] ata4.00: failed command: READ DMA EXT [ 145.809314] ata4.00: cmd 25/00:80:b8:ae:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 145.809387] ata4.00: status: { DRDY ERR } [ 145.809406] ata4.00: error: { ICRC ABRT } [ 145.809431] ata4: soft resetting link [ 145.980228] ata4.00: configured for MWDMA2 [ 145.980236] ata4: EH complete [ 145.996809] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 145.996841] ata4.00: BMDMA stat 0x26 [ 145.996861] ata4.00: failed command: READ DMA EXT [ 145.996887] ata4.00: cmd 25/00:80:b8:ae:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ read_dma udma icrc error ata4.00: status: { DRDY ERR } [ 145.996979] ata4.00: error: { ICRC ABRT } [ 145.997004] ata4: soft resetting link [ 146.168227] ata4.00: configured for MWDMA2 [ 146.168234] ata4: EH complete [ 146.185238] ata4.00: exception Emask read_dma udma icrc error SAct 0x0 SErr 0x0 action 0x6 [ 146.186531] ata4.00: BMDMA stat 0x26 [ 146.187793] ata4.00: failed command: READ DMA EXT [ 146.189068] ata4.00: cmd 25/00:80:38:af:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 146.191606] ata4.00: status: { DRDY ERR } [ 146.192889] ata4.00: error: { ICRC ABRT } [ 146.194152] ata4: soft resetting link [ 146.364229] read_dma udma icrc error configured for MWDMA2 [ 146.364237] ata4: EH complete [ 146.386362] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 146.387654] ata4.00: BMDMA stat 0x26 [ 146.388949] ata4.00: failed command: READ DMA EXT [ 146.390209] ata4.00: cmd 25/00:80:b8:b1:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 146.392721] ata4.00: status: { DRDY ERR } [ 146.393936] ata4.00: error: { ICRC ABRT } [ 146.395141] ata4: soft resetting link [ 146.564229] ata4.00: configured for MWDMA2 [ 146.564238] ata4: EH complete [ 146.579013] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 146.579051] ata4.00: BMDMA stat 0x26 [ 146.579071] ata4.00: failed command: READ DMA EXT [ 146.579097] ata4.00: cmd 25/00:80:38:b6:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 146.579170] ata4.00: status: { DRDY ERR } [ 146.579190] ata4.00: error: { ICRC ABRT } [ 146.579216] ata4: soft resetting link [ 146.748227] ata4.00: configured for MWDMA2 [ 146.748235] ata4: EH complete [ 146.766841] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 146.766872] ata4.00: BMDMA stat 0x26 [ 146.766892] ata4.00: failed command: READ DMA EXT [ 146.766918] ata4.00: cmd 25/00:80:38:b6:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 146.766990] ata4.00: status: { DRDY ERR } [ 146.767010] ata4.00: error: { ICRC ABRT } [ 146.767035] ata4: soft resetting link [ 146.936228] ata4.00: configured for MWDMA2 [ 146.936236] ata4: EH complete [ 146.954895] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 146.954930] ata4.00: BMDMA stat 0x26 [ 146.954949] ata4.00: failed command: READ DMA EXT [ 146.954976] ata4.00: cmd 25/00:80:b8:b6:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 146.955048] ata4.00: status: { DRDY ERR } [ 146.955068] ata4.00: error: { ICRC ABRT } [ 146.955093] ata4: soft resetting link [ 147.124230] ata4.00: configured for MWDMA2 [ 147.124238] ata4: EH complete [ 147.143941] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 147.145240] ata4.00: BMDMA stat 0x26 [ 147.146502] ata4.00: failed command: READ DMA EXT [ 147.147760] ata4.00: cmd 25/00:80:38:b8:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 147.150307] ata4.00: status: { DRDY ERR } [ 147.151580] ata4.00: error: { ICRC ABRT } [ 147.152850] ata4: soft resetting link [ 147.324230] ata4.00: configured for MWDMA2 [ 147.324239] ata4: EH complete [ 147.342516] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 147.343800] ata4.00: BMDMA stat 0x26 [ 147.345077] ata4.00: failed command: READ DMA EXT [ 147.346337] ata4.00: cmd 25/00:80:38:b8:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ oracle create procedure show errors ata4.00: status: { DRDY ERR } [ 147.350066] ata4.00: error: { ICRC ABRT } [ 147.351270] ata4: soft resetting link [ 147.520222] ata4.00: configured for MWDMA2 [ 147.520229] ata4: EH complete [ 147.531976] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 147.532025] ata4.00: BMDMA stat 0x26 [ 147.532046] ata4.00: failed command: READ DMA EXT [ 147.532072] ata4.00: cmd 25/00:80:b8:b9:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 147.532145] ata4.00: status: { DRDY ERR } [ 147.532165] ata4.00: error: { ICRC ABRT } [ 147.532190] ata4: soft resetting link [ 147.704229] ata4.00: configured for MWDMA2 [ 147.704237] ata4: EH complete [ 147.719264] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 147.719295] ata4.00: BMDMA stat 0x26 [ 147.719315] ata4.00: failed command: READ DMA EXT [ 147.719341] ata4.00: cmd 25/00:80:b8:b9:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 147.719413] ata4.00: status: { DRDY ERR } [ 147.719433] ata4.00: error: { ICRC ABRT } [ 147.719457] ata4: soft resetting link [ 147.888229] ata4.00: configured for MWDMA2 [ 147.888236] ata4: EH complete [ 147.908672] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 147.908709] ata4.00: BMDMA stat 0x26 [ 147.908729] ata4.00: failed command: READ DMA EXT [ 147.908756] ata4.00: cmd 25/00:80:b8:bb:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 147.908828] ata4.00: status: { DRDY ERR } [ 147.908848] ata4.00: error: { ICRC ABRT } [ 147.908874] ata4: soft resetting link [ 148.080237] ata4.00: configured for MWDMA2 [ 148.080245] ata4: EH complete [ 148.099012] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 148.100292] ata4.00: BMDMA stat 0x26 [ 148.101548] ata4.00: failed command: READ DMA EXT [ 148.102798] ata4.00: cmd 25/00:80:b8:be:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 148.105331] ata4.00: status: { DRDY ERR } [ 148.106597] ata4.00: error: { ICRC ABRT } [ 148.107857] ata4: soft resetting link [ 148.276227] ata4.00: configured for MWDMA2 [ 148.276236] ata4: EH complete [ 148.287853] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 148.289158] ata4.00: BMDMA stat 0x26 [ 148.290421] ata4.00: failed command: READ DMA EXT [ 148.291675] ata4.00: cmd 25/00:80:38:c0:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 148.294180] ata4.00: status: { DRDY ERR } [ 148.295390] ata4.00: error: { ICRC ABRT } [ 148.296592] ata4: soft resetting link [ 148.468232] ata4.00: configured for MWDMA2 [ 148.468240] ata4: EH complete [ 148.486196] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 148.487412] ata4.00: BMDMA stat 0x26 [ 148.488622] ata4.00: failed command: READ DMA EXT [ 148.489823] ata4.00: cmd 25/00:80:38:c0:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 148.492252] ata4.00: status: { DRDY ERR } [ 148.493473] ata4.00: error: { ICRC ABRT } [ 148.493480] ata4: soft resetting link [ 148.664230] ata4.00: configured for MWDMA2 [ 148.664237] ata4: EH complete [ 148.674103] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ read_dma udma icrc error ata4.00: BMDMA stat 0x26 [ 148.674155] ata4.00: failed command: READ DMA EXT [ 148.674181] ata4.00: cmd 25/00:80:38:c0:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 148.674253] ata4.00: status: { DRDY ERR } [ 148.674273] ata4.00: error: { ICRC ABRT } [ 148.674298] ata4: soft resetting link [ 148.844229] ata4.00: configured for MWDMA2 [ 148.844235] ata4: EH complete [ 148.862493] ata4.00: exception Emask 0x0 SAct 0x0 SErr read_dma udma icrc error action 0x6 [ 148.862528] ata4.00: BMDMA stat 0x26 [ 148.862547] ata4.00: failed command: READ DMA EXT [ 148.862573] ata4.00: cmd 25/00:80:b8:c0:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 148.862646] ata4.00: status: { DRDY ERR } [ 148.862665] ata4.00: error: { ICRC ABRT } [ 148.862690] ata4: soft resetting link [ 149.032229] ata4.00: configured for MWDMA2 [ 149.032236] ata4: EH complete [ 149.050917] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 149.050951] ata4.00: BMDMA stat 0x26 [ 149.050971] ata4.00: failed command: READ DMA EXT [ 149.050998] ata4.00: cmd 25/00:80:b8:c1:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 149.051070] ata4.00: status: { DRDY ERR } [ 149.051090] ata4.00: error: { ICRC ABRT } [ 149.051115] ata4: soft resetting link [ 149.220228] ata4.00: configured for MWDMA2 [ 149.220236] ata4: EH complete [ 149.238701] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 149.239967] ata4.00: BMDMA stat 0x26 [ 149.241236] ata4.00: failed command: READ DMA EXT [ 149.242498] ata4.00: cmd 25/00:80:b8:c1:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 149.245026] ata4.00: status: { DRDY ERR } [ 149.246266] ata4.00: error: { ICRC ABRT } [ 149.247471] ata4: soft resetting link [ 149.416230] ata4.00: configured for MWDMA2 [ 149.416237] ata4: EH complete [ 149.428174] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 149.429391] ata4.00: BMDMA stat 0x26 [ 149.430598] ata4.00: failed command: READ DMA EXT [ 149.431809] ata4.00: cmd 25/00:80:38:c3:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 149.434248] ata4.00: status: { DRDY ERR } [ 149.435469] ata4.00: error: { ICRC ABRT } [ 149.436687] ata4: soft resetting link [ 149.608229] ata4.00: configured for MWDMA2 [ 149.608239] ata4: EH complete [ 149.626322] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 149.626355] ata4.00: BMDMA stat 0x26 [ 149.626374] ata4.00: failed command: READ DMA EXT [ 149.626400] ata4.00: cmd 25/00:80:38:c3:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 149.626472] ata4.00: status: { DRDY ERR } [ 149.626492] ata4.00: error: { ICRC ABRT } [ 149.626517] ata4: soft resetting link [ 149.796229] ata4.00: configured for MWDMA2 [ 149.796235] ata4: EH complete [ 149.814890] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 149.814924] ata4.00: BMDMA stat 0x26 [ 149.814944] ata4.00: failed command: READ DMA EXT [ 149.814971] ata4.00: cmd 25/00:80:b8:c3:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 149.815043] ata4.00: status: { DRDY ERR } [ 149.815063] ata4.00: error: { ICRC ABRT } [ 149.815088] ata4: soft resetting link [ 149.984234] ata4.00: configured for MWDMA2 read_dma udma icrc error 149.984241] ata4: EH complete [ 150.005903] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 150.005941] ata4.00: BMDMA stat 0x26 [ 150.005961] ata4.00: failed blackberry 7290 rum error 200 READ DMA EXT [ 150.005987] ata4.00: cmd 25/00:80:b8:c5:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 150.006061] ata4.00: status: { DRDY ERR } [ 150.006080] ata4.00: error: { ICRC ABRT } [ 150.006106] ata4: soft resetting link [ 150.176230] ata4.00: configured for MWDMA2 [ 150.176238] ata4: EH complete [ 150.193469] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 150.194738] ata4.00: BMDMA stat 0x26 [ 150.196010] ata4.00: failed command: READ DMA EXT [ 150.197272] ata4.00: cmd 25/00:80:b8:c5:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 150.199815] ata4.00: status: { DRDY ERR } [ 150.201098] ata4.00: error: { ICRC ABRT } [ 150.202370] ata4: soft resetting link [ 150.372228] ata4.00: configured for MWDMA2 [ 150.372235] ata4: EH complete [ 150.382660] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 150.383948] ata4.00: BMDMA stat 0x26 [ 150.385240] ata4.00: failed command: READ DMA EXT [ 150.386511] ata4.00: cmd 25/00:80:38:c7:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 150.389032] ata4.00: status: { DRDY ERR } [ 150.390256] ata4.00: error: { ICRC ABRT } [ 150.391470] ata4: soft resetting link [ 150.560230] ata4.00: configured for MWDMA2 [ 150.560239] ata4: EH complete [ 150.572017] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 150.572054] ata4.00: BMDMA stat 0x26 [ 150.572074] ata4.00: failed command: READ DMA EXT [ 150.572101] ata4.00: cmd 25/00:80:38:c9:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 150.572173] ata4.00: status: { DRDY ERR } [ 150.572193] ata4.00: error: { ICRC ABRT } [ 150.572219] ata4: soft resetting link [ 150.744231] ata4.00: configured for MWDMA2 [ 150.744239] read_dma udma icrc error EH complete [ 150.760365] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 150.760400] ata4.00: BMDMA stat 0x26 [ 150.760419] ata4.00: failed command: READ DMA EXT [ 150.760446] ata4.00: cmd 25/00:80:38:ca:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 150.760518] ata4.00: status: { DRDY ERR } [ 150.760538] ata4.00: error: { ICRC ABRT } [ portable error repair professional v3.8.5 ata4: soft resetting link [ 150.932229] ata4.00: configured for MWDMA2 [ 150.932237] ata4: EH complete [ read_dma udma icrc error 150.948041] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 150.948073] ata4.00: BMDMA stat 0x26 [ 150.948093] ata4.00: failed command: READ DMA EXT [ 150.948119] ata4.00: cmd 25/00:80:38:ca:1d/00:00:1d:00:00/e0 importerror cannot import name sw_hide 0 dma 65536 in [ 150.948192] ata4.00: status: { DRDY ERR } [ 150.948212] ata4.00: error: { ICRC ABRT } [ 150.948237] ata4: how to solve icm delete ras error resetting link [ 151.120224] ata4.00: configured for MWDMA2 [ 151.120231] ata4: EH complete [ 151.136742] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 151.137998] ata4.00: BMDMA stat 0x26 [ 151.139230] ata4.00: failed command: READ DMA EXT [ 151.140481] ata4.00: cmd 25/00:80:38:cb:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 151.142979] ata4.00: status: { DRDY ERR } [ 151.144226] ata4.00: error: { ICRC ABRT } [ 151.145476] ata4: soft resetting link [ read_dma udma icrc error 151.316235] ata4.00: configured for MWDMA2 [ 151.316243] ata4: EH complete [ 151.335180] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 151.336458] ata4.00: BMDMA stat 0x26 [ 151.337702] ata4.00: failed command: READ DMA EXT [ 151.338947] ata4.00: cmd 25/00:80:38:cb:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 151.341459] ata4.00: status: { DRDY ERR } [ 151.342665] ata4.00: error: { ICRC ABRT } [ 151.343874] ata4: soft resetting link [ 151.512228] ata4.00: configured for MWDMA2 [ 151.512235] ata4: EH complete [ 151.524251] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 151.524288] ata4.00: BMDMA stat 0x26 [ 151.524308] ata4.00: failed command: READ DMA EXT [ 151.524334] ata4.00: cmd 25/00:80:38:cc:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 151.524407] ata4.00: status: { DRDY ERR } [ 151.524427] ata4.00: error: { ICRC ABRT } [ 151.524452] ata4: soft resetting link [ 151.696231] ata4.00: configured for MWDMA2 [ 151.696238] ata4: EH complete [ 151.713119] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 151.713155] ata4.00: BMDMA stat 0x26 [ 151.713174] ata4.00: failed command: READ DMA EXT [ 151.713201] ata4.00: cmd 25/00:80:b8:cd:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 151.713274] ata4.00: status: { DRDY ERR } [ 151.713294] ata4.00: error: { ICRC ABRT } [ 151.713319] ata4: soft resetting link [ 151.884235] ata4.00: configured for MWDMA2 [ 151.884243] ata4: EH complete [ 151.900248] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 151.900280] ata4.00: BMDMA stat 0x26 [ 151.900299] ata4.00: failed command: READ DMA EXT [ 151.900326] ata4.00: cmd 25/00:80:b8:cd:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 151.900398] ata4.00: status: { DRDY ERR } [ 151.900418] ata4.00: error: { ICRC ABRT } [ 151.900443] ata4: soft resetting link [ 152.072229] ata4.00: configured for MWDMA2 [ 152.072236] ata4: EH complete [ 152.088740] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 152.089988] ata4.00: BMDMA stat 0x26 [ 152.091236] ata4.00: failed command: READ DMA EXT [ 152.092493] ata4.00: cmd 25/00:80:38:ce:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 152.095030] ata4.00: status: { DRDY ERR } [ 152.096296] ata4.00: error: { ICRC ABRT } [ 152.097548] ata4: soft resetting link [ 152.268231] ata4.00: configured for MWDMA2 [ 152.268238] ata4: EH complete [ 152.288075] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 152.289355] ata4.00: BMDMA stat 0x26 [ 152.290610] ata4.00: failed command: READ DMA EXT [ 152.291857] ata4.00: cmd 25/00:80:b8:ce:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 152.294365] ata4.00: status: { DRDY ERR } [ 152.295570] ata4.00: error: { ICRC ABRT } [ 152.296769] ata4: soft resetting link [ 152.468226] ata4.00: configured for MWDMA2 [ 152.468234] ata4: EH complete [ 152.487899] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 152.489131] ata4.00: BMDMA stat 0x26 [ 152.490331] ata4.00: failed command: READ DMA EXT [ 152.491524] ata4.00: cmd 25/00:80:38:d0:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 152.493948] ata4.00: status: { DRDY ERR } [ 152.495167] ata4.00: error: { ICRC ABRT } [ 152.495175] ata4: soft resetting link [ 152.664227] ata4.00: configured for MWDMA2 [ 152.664236] ata4: EH complete [ 152.676273] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 152.676310] ata4.00: BMDMA stat 0x26 [ 152.676329] ata4.00: failed command: READ DMA EXT [ 152.676356] ata4.00: cmd 25/00:80:b8:d0:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 152.676428] ata4.00: status: { DRDY ERR } [ 152.676447] ata4.00: error: { ICRC ABRT } [ 152.676472] ata4: soft resetting link [ 152.848229] ata4.00: configured for MWDMA2 [ 152.848237] ata4: EH complete [ 152.863549] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 152.863581] ata4.00: BMDMA stat 0x26 [ 152.863600] ata4.00: failed command: READ DMA EXT [ 152.863626] ata4.00: cmd 25/00:80:b8:d0:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 152.863699] ata4.00: status: { DRDY ERR } [ 152.863719] ata4.00: error: { ICRC ABRT } [ 152.863744] ata4: soft resetting link [ 153.042697] ata4.00: failed to IDENTIFY (I/O error, err_mask=0x2) [ 153.042699] ata4.00: revalidation failed (errno=-5) [ 158.016241] ata4: soft resetting link [ 158.188229] ata4.00: configured for MWDMA2 [ 158.188237] ata4: EH complete [ 158.199407] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 158.199444] ata4.00: BMDMA stat 0x26 [ 158.199463] ata4.00: failed command: READ DMA EXT [ 158.199490] ata4.00: cmd 25/00:80:b8:d1:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 158.199563] ata4.00: status: { DRDY ERR } [ 158.199583] ata4.00: error: { Read_dma udma icrc error ABRT } [ 158.199608] ata4: soft resetting link [ 158.368230] ata4.00: configured for MWDMA2 [ 158.368239] ata4: EH complete [ 158.389417] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 158.389453] ata4.00: BMDMA stat 0x26 [ 158.389473] ata4.00: failed command: READ DMA EXT [ 158.389499] ata4.00: cmd 25/00:80:b8:d2:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 158.389572] ata4.00: status: { DRDY ERR } [ 158.389592] ata4.00: error: { ICRC ABRT } [ 158.389617] ata4: soft resetting link [ 158.560232] ata4.00: configured for MWDMA2 [ 158.560241] ata4: EH complete [ 158.577529] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 158.577564] ata4.00: BMDMA stat 0x26 [ 158.577584] ata4.00: failed command: READ DMA EXT [ 158.577611] ata4.00: cmd 25/00:80:38:d3:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 158.577683] ata4.00: status: { DRDY ERR } [ 158.577703] ata4.00: error: { ICRC ABRT } [ 158.577728] ata4: soft resetting link [ 158.748230] ata4.00: configured for MWDMA2 [ 158.748237] ata4: EH complete [ 158.766131] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 158.766167] ata4.00: BMDMA stat 0x26 [ 158.766186] ata4.00: failed command: READ DMA EXT [ 158.766213] ata4.00: cmd 25/00:80:38:d4:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 158.766285] ata4.00: status: { DRDY ERR } [ 158.766305] ata4.00: error: { ICRC ABRT } [ 158.766331] ata4: soft resetting link [ 158.936234] ata4.00: configured for MWDMA2 [ 158.936241] ata4: EH complete [ 158.953712] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 158.953744] ata4.00: BMDMA stat 0x26 [ 158.953763] ata4.00: failed command: READ DMA EXT [ 158.953789] ata4.00: cmd 25/00:80:38:d4:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 158.953862] ata4.00: status: { DRDY ERR } [ 158.953881] ata4.00: error: { ICRC ABRT } [ 158.953906] ata4: soft resetting link [ 159.124230] ata4.00: configured for MWDMA2 [ 159.124236] ata4: EH complete [ 159.142222] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 159.143565] ata4.00: BMDMA stat 0x26 [ 159.144934] ata4.00: read_dma udma icrc error command: READ DMA EXT [ 159.146293] ata4.00: cmd read_dma udma icrc error tag 0 dma 65536 in [ 159.149014] ata4.00: status: { DRDY ERR } [ 159.150352] ata4.00: error: { ICRC ABRT } [ 159.151656] ata4: soft resetting link [ 159.320226] ata4.00: configured for MWDMA2 [ 159.320233] ata4: EH complete [ 159.334601] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 159.335918] ata4.00: BMDMA stat 0x26 [ 159.337236] ata4.00: failed command: READ DMA EXT [ 159.338538] ata4.00: cmd 25/00:80:b8:da:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 159.341179] ata4.00: status: { DRDY ERR } [ 159.342509] ata4.00: error: { ICRC ABRT } [ 159.343821] ata4: soft resetting link [ 159.512232] ata4.00: configured for MWDMA2 [ 159.512241] ata4: EH complete [ 159.523034] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 159.523070] ata4.00: BMDMA stat 0x26 [ 159.523090] ata4.00: failed command: READ DMA EXT [ read_dma udma icrc error 159.523117] ata4.00: cmd 25/00:80:b8:db:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 159.523189] ata4.00: status: { DRDY ERR } [ 159.523209] ata4.00: error: { ICRC ABRT } [ 159.523234] ata4: soft resetting link [ 159.692230] ata4.00: configured for MWDMA2 [ 159.692238] ata4: EH complete [ 159.711679] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 159.711714] ata4.00: BMDMA stat 0x26 [ 159.711734] ata4.00: failed command: READ DMA EXT [ 159.711760] ata4.00: cmd 25/00:80:b8:dc:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 159.711833] ata4.00: status: { DRDY ERR } [ 159.711853] ata4.00: error: { ICRC ABRT } [ 159.711878] ata4: soft resetting link [ 159.880229] ata4.00: configured for MWDMA2 [ 159.880238] ata4: EH complete [ 159.899217] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 159.899249] ata4.00: BMDMA stat 0x26 [ 159.899268] ata4.00: failed command: READ DMA EXT [ 159.899295] ata4.00: cmd 25/00:80:b8:dc:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 159.899367] ata4.00: status: { DRDY ERR } [ 159.899387] ata4.00: error: { ICRC ABRT } [ 159.899412] ata4: soft resetting link [ 160.068228] ata4.00: configured for MWDMA2 [ 160.068234] ata4: EH complete [ 160.087450] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 160.088794] ata4.00: BMDMA stat 0x26 [ 160.090153] ata4.00: failed command: READ DMA EXT [ 160.091502] ata4.00: cmd 25/00:80:38:dd:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 160.094230] ata4.00: status: { DRDY ERR } [ 160.095591] ata4.00: error: { ICRC ABRT } [ 160.096950] ata4: soft resetting link [ 160.268230] ata4.00: configured for MWDMA2 [ 160.268238] ata4: EH complete [ 160.286737] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 160.288125] ata4.00: BMDMA stat 0x26 [ 160.289488] ata4.00: failed command: READ DMA EXT [ 160.290838] ata4.00: cmd 25/00:80:b8:dd:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 160.293523] ata4.00: status: { DRDY ERR } [ 160.294818] ata4.00: error: { ICRC ABRT } [ 160.296103] ata4: soft resetting link [ read_dma udma icrc error ata4.00: configured for MWDMA2 [ 160.468238] ata4: EH complete [ 160.485081] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 160.486353] ata4.00: BMDMA stat 0x26 [ 160.487615] ata4.00: failed command: READ DMA EXT [ 160.488886] ata4.00: cmd 25/00:80:b8:dd:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 160.491409] ata4.00: status: { DRDY ERR } [ 160.492675] ata4.00: error: { ICRC ABRT } [ 160.493924] ata4: soft resetting link [ 160.664226] ata4.00: configured for MWDMA2 [ 160.664234] ata4: EH complete [ 160.685370] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 160.685405] ata4.00: BMDMA stat 0x26 [ 160.685425] ata4.00: failed command: READ DMA EXT [ 160.685451] ata4.00: cmd 25/00:80:38:df:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 160.685524] ata4.00: status: { DRDY ERR } [ 160.685544] ata4.00: error: { ICRC ABRT } [ 160.685569] ata4: soft resetting link [ 160.856231] ata4.00: configured for MWDMA2 [ 160.856240] ata4: EH complete [ 160.873946] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 160.873981] ata4.00: BMDMA stat 0x26 [ 160.874001] ata4.00: failed command: READ DMA EXT [ 160.874027] ata4.00: cmd 25/00:80:b8:df:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 160.874099] ata4.00: status: { DRDY ERR } [ 160.874119] ata4.00: error: { ICRC ABRT } [ 160.874145] ata4: soft resetting link [ 161.044232] ata4.00: configured for MWDMA2 [ 161.044240] ata4: EH complete [ 161.063738] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 161.063773] ata4.00: BMDMA stat 0x26 [ 161.063793] ata4.00: failed command: READ DMA EXT [ 161.063820] ata4.00: cmd 25/00:80:b8:e0:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 161.063892] ata4.00: status: { DRDY ERR } [ 161.063912] ata4.00: error: { ICRC ABRT } [ 161.063938] ata4: soft resetting link [ 161.232229] ata4.00: configured for MWDMA2 [ 161.232238] ata4: EH complete [ 161.251977] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 161.253295] ata4.00: BMDMA stat 0x26 [ 161.254591] ata4.00: failed command: READ DMA EXT [ 161.255887] ata4.00: cmd 25/00:80:38:e1:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 161.258452] ata4.00: status: { DRDY ERR } [ 161.259690] ata4.00: error: { ICRC ABRT } [ 161.260922] ata4: soft resetting link [ 161.432227] ata4.00: configured for MWDMA2 [ 161.432235] ata4: EH read_dma udma icrc error [ 161.453088] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 161.454330] ata4.00: BMDMA stat 0x26 [ 161.455552] ata4.00: failed command: READ DMA EXT [ 161.456783] ata4.00: cmd 25/00:80:b8:e3:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 161.459275] ata4.00: status: { DRDY ERR } [ 161.460515] ata4.00: error: { ICRC ABRT } [ 161.461720] ata4: soft resetting link [ 161.632229] ata4.00: configured for MWDMA2 [ 161.632238] ata4: EH complete [ 161.655352] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 161.655392] ata4.00: BMDMA stat 0x26 [ 161.655412] ata4.00: failed command: READ DMA EXT [ 161.655439] ata4.00: cmd read_dma udma icrc error tag 0 dma 65536 in [ 161.655512] ata4.00: status: { DRDY ERR } [ 161.655532] ata4.00: error: { ICRC ABRT } [ 161.655558] ata4: soft resetting link [ 161.824236] ata4.00: configured for MWDMA2 [ 161.824244] ata4: EH complete [ 161.842618] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 161.842650] ata4.00: BMDMA stat 0x26 [ 161.842669] ata4.00: failed command: READ DMA EXT [ 161.842695] ata4.00: cmd 25/00:80:38:e8:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 161.842767] ata4.00: status: { DRDY ERR } [ 161.842787] ata4.00: error: { ICRC ABRT } [ 161.842812] ata4: soft resetting link [ 162.012229] ata4.00: configured for MWDMA2 [ 162.012235] ata4: EH complete [ 162.031838] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 162.031875] ata4.00: BMDMA stat 0x26 [ 162.031894] ata4.00: failed command: READ DMA EXT [ 162.031921] ata4.00: cmd 25/00:80:b8:e9:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 162.031994] ata4.00: status: { DRDY ERR } [ 162.032022] ata4.00: error: { ICRC ABRT } [ 162.032048] ata4: soft resetting link [ 162.204224] ata4.00: configured for MWDMA2 [ 162.204232] ata4: EH complete [ 162.220635] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 162.221923] ata4.00: BMDMA stat 0x26 [ 162.223192] ata4.00: failed command: READ DMA EXT [ 162.224468] ata4.00: cmd 25/00:80:38:eb:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 162.227025] ata4.00: status: { DRDY ERR } [ 162.228309] ata4.00: error: { ICRC ABRT } [ 162.229585] ata4: soft resetting link [ 162.400227] ata4.00: configured for MWDMA2 [ 162.400234] ata4: EH complete [ 162.418985] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 162.420286] ata4.00: BMDMA stat 0x26 [ 162.421568] ata4.00: failed command: READ DMA EXT [ 162.422846] ata4.00: cmd 25/00:80:38:eb:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 162.425404] ata4.00: status: { DRDY ERR } [ 162.426651] ata4.00: error: { ICRC ABRT } [ 162.427857] ata4: soft resetting link [ 162.596225] ata4.00: configured for MWDMA2 [ 162.596232] ata4: EH complete [ 162.606935] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 162.606967] ata4.00: BMDMA stat 0x26 [ 162.606987] ata4.00: failed command: READ DMA EXT [ 162.607013] ata4.00: cmd 25/00:80:38:eb:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 162.607085] ata4.00: status: { DRDY ERR } [ 162.607105] ata4.00: error: { ICRC ABRT } [ 162.607130] ata4: soft resetting link [ 162.776224] ata4.00: configured for MWDMA2 [ 162.776231] ata4: EH complete [ 162.794259] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 162.794291] ata4.00: BMDMA stat 0x26 [ 162.794310] ata4.00: failed command: READ DMA EXT [ 162.794336] ata4.00: cmd 25/00:80:38:eb:1d/00:00:1d:00:00/e0 tag 0 dma 65536 in [ 162.794408] ata4.00: status: { DRDY ERR } [ 162.794428] ata4.00: error: { ICRC ABRT } [ 162.794453] ata4: soft resetting link [ 162.964231] ata4.00: configured for MWDMA2 [ 162.964237] ata4: EH complete [ 168.104474] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 168.104518] ata4.00: BMDMA stat 0x26 [ 168.104541] ata4.00: failed command: READ DMA EXT [ 168.104568] ata4.00: cmd 25/00:08:00:ed:51/00:00:1d:00:00/e0 tag 0 dma 4096 in [ 168.104645] ata4.00: status: { DRDY ERR } [ 168.104665] ata4.00: error: { ICRC ABRT } [ 168.104696] ata4: soft resetting link [ 168.276291] ata4.00: configured for MWDMA2 [ 168.276314] ata4: EH complete [ 168.582547] ata4.00: exception Emask 0x0 SAct read_dma udma icrc error SErr 0x0 action 0x6 [ 168.582588] ata4.00: BMDMA stat 0x26 [ 168.582608] ata4.00: failed command: READ DMA [ 168.582634] ata4.00: cmd c8/00:08:00:0c:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 168.582707] ata4.00: status: { DRDY ERR } [ 168.582727] ata4.00: error: { ICRC ABRT } [ 168.582755] ata4: soft resetting link [ 168.752267] ata4.00: configured for MWDMA2 [ 168.752284] ata4: EH complete [ 168.840689] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 168.840732] ata4.00: BMDMA stat 0x26 [ 168.840756] ata4.00: failed command: READ DMA [ 168.840782] ata4.00: cmd c8/00:08:30:c4:25/00:00:00:00:00/e0 tag 0 dma 4096 in [ 168.840862] ata4.00: status: { DRDY ERR } [ 168.840883] ata4.00: error: { ICRC ABRT } [ 168.840911] ata4: soft resetting link [ 169.012247] ata4.00: configured for MWDMA2 [ 169.012263] ata4: EH complete [ 169.424977] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 169.425020] ata4.00: BMDMA stat 0x26 [ 169.425042] ata4.00: failed command: READ DMA [ 169.425067] ata4.00: cmd c8/00:08:80:28:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 169.425152] ata4.00: status: { DRDY ERR } [ 169.425173] ata4.00: error: { ICRC ABRT } [ 169.425202] ata4: soft resetting link [ 169.596296] ata4.00: configured for MWDMA2 [ 169.596316] ata4: EH complete [ 169.630569] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 169.630610] ata4.00: BMDMA stat 0x26 [ 169.630631] ata4.00: failed command: READ DMA [ 169.630657] ata4.00: cmd c8/00:00:e0:76:00/00:00:00:00:00/e0 tag 0 dma 131072 in [ 169.630731] ata4.00: status: { DRDY ERR } [ 169.630751] ata4.00: error: { ICRC ABRT } [ 169.630778] ata4: soft resetting link [ 169.800267] ata4.00: configured for MWDMA2 [ 169.800283] ata4: EH complete [ 169.807304] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 169.807345] ata4.00: BMDMA stat 0x26 [ 169.807366] ata4.00: failed command: READ DMA [ 169.807391] ata4.00: cmd c8/00:00:e0:76:00/00:00:00:00:00/e0 tag 0 dma 131072 in [ 169.807465] ata4.00: status: { DRDY ERR } [ 169.807486] ata4.00: error: { ICRC ABRT } [ 169.807513] ata4: soft resetting link [ 169.976234] ata4.00: configured for MWDMA2 [ 169.976248] ata4: EH complete [ 169.983694] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 169.983734] ata4.00: BMDMA stat 0x26 [ 169.983755] ata4.00: failed command: READ DMA [ 169.983781] ata4.00: cmd c8/00:00:e0:76:00/00:00:00:00:00/e0 tag 0 dma 131072 in [ 169.983855] ata4.00: status: { DRDY ERR } [ 169.983875] ata4.00: error: { ICRC ABRT } [ 169.983902] ata4: soft resetting link [ 170.152262] ata4.00: configured for MWDMA2 [ 170.152281] ata4: EH complete [ 170.160552] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 170.161848] ata4.00: BMDMA stat 0x26 [ 170.163114] ata4.00: failed command: READ DMA [ 170.164386] ata4.00: cmd c8/00:00:e0:76:00/00:00:00:00:00/e0 tag 0 dma 131072 in [ 170.166940] ata4.00: status: { DRDY ERR } [ 170.168219] ata4.00: error: { ICRC ABRT } [ 170.169531] ata4: soft resetting link [ 170.340261] ata4.00: error 1090 rsop for MWDMA2 [ 170.340277] ata4: EH complete [ 170.348159] read_dma udma icrc error exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 170.349463] ata4.00: BMDMA stat 0x26 [ 170.350745] ata4.00: failed command: READ DMA [ 170.352018] ata4.00: cmd c8/00:00:e0:76:00/00:00:00:00:00/e0 tag 0 dma 131072 in [ 170.354560] ata4.00: status: { DRDY ERR } [ 170.355817] ata4.00: error: { ICRC ABRT } [ 170.357068] ata4: soft resetting link [ 170.528231] ata4.00: configured for MWDMA2 [ 170.528246] ata4: EH complete [ 170.535294] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 170.535334] ata4.00: BMDMA stat 0x26 [ 170.535355] ata4.00: failed command: READ DMA [ 170.535380] ata4.00: cmd c8/00:00:e0:76:00/00:00:00:00:00/e0 tag 0 dma 131072 in [ 170.535454] ata4.00: status: { DRDY ERR } [ 170.535475] read_dma udma icrc error error: { ICRC ABRT } [ 170.535501] ata4: soft resetting link [ 170.704265] ata4.00: configured for MWDMA2 [ 170.704688] ata4: EH complete [ 170.725040] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 read_dma udma icrc error 170.725080] ata4.00: BMDMA stat 0x26 [ 170.725101] ata4.00: failed command: READ DMA EXT [ 170.725128] ata4.00: cmd 25/00:08:00:47:0e/00:00:36:00:00/e0 tag 0 dma 4096 in [ 170.727618] ata4.00: status: { DRDY ERR } [ 170.728827] ata4.00: error: { ICRC ABRT } [ 170.729987] ata4: soft resetting link [ 170.900256] ata4.00: configured for MWDMA2 [ 170.900273] ata4: EH complete [ 171.191380] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 171.192590] ata4.00: BMDMA stat 0x26 [ 171.193755] ata4.00: failed command: READ DMA [ 171.194910] ata4.00: cmd c8/00:08:58:1f:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 171.197290] ata4.00: status: { DRDY ERR } [ 171.198467] ata4.00: error: { ICRC ABRT } [ 171.199696] ata4: soft resetting link [ 171.368283] ata4.00: configured for MWDMA2 [ 171.368301] ata4: EH complete [ 171.443609] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 171.444797] ata4.00: BMDMA stat 0x26 [ 171.445903] ata4.00: failed command: READ DMA [ 171.446996] ata4.00: cmd c8/00:20:08:6f:00/00:00:00:00:00/e0 tag 0 dma 16384 in [ 171.449230] ata4.00: status: { DRDY ERR } [ 171.450336] ata4.00: error: { ICRC ABRT } [ 171.451477] ata4: soft resetting link [ 171.620248] ata4.00: configured for MWDMA2 [ 171.620264] ata4: EH complete [ 171.757974] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 171.758018] ata4.00: BMDMA stat 0x26 [ 171.758038] ata4.00: failed command: READ DMA EXT [ 171.758066] ata4.00: cmd 25/00:08:c0:14:6c/00:00:9f:00:00/e0 tag 0 dma 4096 in [ 171.758139] ata4.00: status: { DRDY ERR } [ 171.758159] ata4.00: error: { ICRC ABRT } [ 171.758186] ata4: soft resetting link [ 171.928284] ata4.00: configured for MWDMA2 [ 171.928302] ata4: EH complete [ 171.984609] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 171.984650] ata4.00: BMDMA stat 0x26 [ 171.984671] ata4.00: failed command: READ DMA EXT [ 171.984698] ata4.00: cmd 25/00:08:80:4e:f3/00:00:9a:00:00/e0 tag 0 dma 4096 in [ 171.984771] ata4.00: status: { DRDY ERR } [ 171.984791] ata4.00: error: { ICRC ABRT } [ 171.984819] ata4: soft resetting link [ 172.156280] ata4.00: configured for MWDMA2 [ 172.156298] ata4: EH complete [ 172.364560] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 172.364601] ata4.00: BMDMA stat 0x26 [ 172.364626] ata4.00: failed command: READ DMA read_dma udma icrc error 172.364652] ata4.00: cmd c8/00:08:a8:1d:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 172.364737] ata4.00: status: { DRDY ERR } [ 172.364758] ata4.00: error: { ICRC ABRT } [ 172.364787] ata4: soft resetting link [ 172.536241] ata4.00: configured for MWDMA2 [ read_dma udma icrc error ata4: EH complete [ 173.118381] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 173.118421] ata4.00: BMDMA stat 0x26 [ 173.118441] ata4.00: failed command: READ DMA [ 173.118467] ata4.00: cmd c8/00:08:10:31:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 173.118540] ata4.00: status: { DRDY ERR } [ 173.118560] ata4.00: error: { ICRC ABRT } [ 173.118587] ata4: soft resetting link [ 173.288232] ata4.00: configured for MWDMA2 [ 173.288245] ata4: EH complete [ 173.390106] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 173.390146] ata4.00: BMDMA stat 0x26 [ 173.390167] ata4.00: failed command: READ DMA [ 173.390192] ata4.00: cmd c8/00:08:90:2a:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 173.390265] ata4.00: status: { DRDY Read_dma udma icrc error } [ 173.390285] ata4.00: error: { ICRC ABRT } [ 173.390313] ata4: soft resetting link [ 173.560229] ata4.00: configured for MWDMA2 [ 173.560243] ata4: EH complete [ 174.012180] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 174.012220] ata4.00: BMDMA stat 0x26 [ 174.012241] ata4.00: failed command: READ DMA [ 174.012266] ata4.00: cmd c8/00:08:d8:15:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 174.012340] ata4.00: status: { DRDY ERR } [ 174.012360] ata4.00: error: { ICRC ABRT } read_dma udma icrc error 174.012387] ata4: soft resetting link [ 174.184239] ata4.00: configured for MWDMA2 [ 174.184252] ata4: EH complete [ 174.289072] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 174.289112] ata4.00: BMDMA stat 0x26 [ 174.289133] ata4.00: failed command: READ DMA [ 174.289158] ata4.00: cmd c8/00:08:20:54:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 174.289231] ata4.00: status: { DRDY ERR } [ 174.289251] ata4.00: error: { ICRC ABRT } [ 174.289278] ata4: soft resetting link [ 174.460240] ata4.00: configured for MWDMA2 [ 174.460254] ata4: EH complete [ 174.600705] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 174.600745] ata4.00: BMDMA stat 0x26 [ 174.600765] ata4.00: failed command: READ DMA [ 174.600791] ata4.00: cmd c8/00:08:b0:33:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 174.600864] ata4.00: status: { DRDY ERR } [ 174.600884] ata4.00: error: { ICRC ABRT } [ 174.600911] ata4: soft resetting link [ 174.772227] ata4.00: configured for MWDMA2 [ 174.772241] ata4: EH complete [ 175.012874] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 175.012913] ata4.00: BMDMA stat 0x26 [ 175.012933] ata4.00: failed command: READ DMA [ 175.012959] ata4.00: cmd c8/00:08:e0:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 175.013032] ata4.00: status: { DRDY ERR } [ 175.013052] ata4.00: error: { ICRC ABRT } [ 175.013079] ata4: soft resetting link [ 175.184239] ata4.00: configured for MWDMA2 [ 175.184254] ata4: EH complete [ 175.189466] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 175.189504] ata4.00: BMDMA stat 0x26 [ 175.189524] ata4.00: failed command: READ DMA [ 175.189550] ata4.00: cmd c8/00:08:e0:10:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 175.189623] ata4.00: status: { DRDY ERR } [ 175.189643] ata4.00: error: { ICRC ABRT } [ 175.189669] ata4: soft resetting link [ 175.364253] ata4.00: configured for MWDMA2 [ 175.364271] ata4: EH complete [ 175.423989] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 175.425141] ata4.00: BMDMA stat 0x26 [ 175.426300] ata4.00: failed command: READ DMA [ 175.427433] ata4.00: cmd c8/00:08:e8:c7:25/00:00:00:00:00/e0 tag 0 dma 4096 in [ 175.429746] ata4.00: status: { DRDY ERR } [ 175.430920] ata4.00: error: { ICRC ABRT } [ 175.432048] ata4: soft resetting link [ 175.604225] ata4.00: configured for MWDMA2 [ 175.604239] ata4: EH complete [ 175.702914] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 175.702954] ata4.00: BMDMA stat 0x26 [ 175.702975] ata4.00: failed command: READ DMA [ 175.703001] ata4.00: cmd c8/00:08:30:b3:25/00:00:00:00:00/e0 tag 0 dma 4096 in [ 175.703074] ata4.00: status: { DRDY ERR } [ 175.703094] ata4.00: error: { ICRC ABRT } [ 175.703121] ata4: soft resetting link [ 175.872231] ata4.00: configured for MWDMA2 [ 175.872243] ata4: EH complete [ 176.195238] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 176.195277] ata4.00: BMDMA stat 0x26 [ 176.195298] ata4.00: failed command: READ DMA [ 176.195323] ata4.00: cmd c8/00:08:18:13:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 176.195396] ata4.00: status: { DRDY ERR } [ 176.195416] ata4.00: error: { ICRC ABRT } [ 176.195443] ata4: soft resetting link [ 176.364228] ata4.00: configured for MWDMA2 recording to terrorist-cs tk.dem 176.364240] ata4: EH complete [ 176.498441] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 176.498480] ata4.00: BMDMA stat 0x26 [ 176.498501] ata4.00: failed command: READ DMA [ 176.498526] ata4.00: cmd c8/00:08:b0:25:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 176.498599] ata4.00: status: { DRDY ERR } [ 176.498619] ata4.00: error: { ICRC ABRT } [ 176.498646] ata4: soft resetting link [ 176.668276] ata4.00: configured for MWDMA2 [ 176.668295] ata4: EH complete [ 176.860589] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 176.860636] ata4.00: BMDMA stat 0x26 [ 176.860661] ata4.00: failed command: READ DMA [ 176.860687] ata4.00: cmd c8/00:08:c0:55:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 176.860769] ata4.00: status: { DRDY ERR } [ 176.860790] ata4.00: error: { ICRC ABRT } [ 176.860819] ata4: soft resetting link [ 177.088279] ata4.00: configured for MWDMA2 [ 177.088303] ata4: EH complete [ 177.224600] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 177.224644] ata4.00: BMDMA stat 0x26 [ 177.224665] ata4.00: failed command: READ DMA EXT [ 177.224693] ata4.00: cmd 25/00:08:40:f9:bc/00:00:e4:00:00/e0 tag 0 dma 4096 in [ 177.224767] ata4.00: status: { DRDY ERR } [ 177.224787] ata4.00: error: { ICRC ABRT } [ 177.224817] ata4: soft resetting link [ 177.396278] ata4.00: configured for MWDMA2 [ 177.396302] ata4: EH complete [ read_dma udma icrc error ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 178.012450] ata4.00: BMDMA stat 0x26 [ 178.012472] ata4.00: failed command: READ DMA EXT [ 178.012500] ata4.00: cmd 25/00:08:28:8b:2c/00:00:71:00:00/e0 tag 0 dma 4096 in [ 178.012576] ata4.00: status: { DRDY ERR } [ 178.012596] ata4.00: error: { ICRC ABRT } [ 178.012624] ata4: soft resetting link read_dma udma icrc error 178.184292] ata4.00: configured for MWDMA2 [ 178.184313] ata4: EH complete [ 178.328046] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 178.328086] ata4.00: BMDMA stat 0x26 [ 178.328107] ata4.00: failed command: READ DMA [ 178.328132] ata4.00: cmd c8/00:08:08:78:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 178.328206] ata4.00: status: corel error 2908 DRDY ERR } [ 178.328226] ata4.00: error: { ICRC ABRT } [ 178.328252] ata4: soft resetting link [ 178.500229] ata4.00: configured for MWDMA2 [ 178.500243] ata4: EH complete [ 178.889840] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 178.889882] ata4.00: BMDMA stat 0x26 [ 178.889904] ata4.00: failed command: READ DMA EXT [ 178.889931] ata4.00: cmd 25/00:00:e0:07:be/00:01:19:00:00/e0 tag 0 dma 131072 in [ 178.890007] ata4.00: status: { DRDY ERR } [ 178.890028] ata4.00: error: { ICRC ABRT } [ 178.890057] ata4: soft resetting link [ 179.060241] ata4.00: configured for MWDMA2 [ 179.060256] ata4: EH complete [ 179.092361] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 179.092402] ata4.00: BMDMA stat 0x26 [ 179.092423] ata4.00: failed command: READ DMA [ 179.092449] ata4.00: cmd c8/00:08:d8:32:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 179.092522] ata4.00: status: { DRDY ERR } [ 179.092543] ata4.00: error: { ICRC ABRT } [ 179.092571] ata4: soft resetting link [ 179.264231] ata4.00: configured for MWDMA2 [ 179.264245] ata4: EH complete [ 179.291855] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 179.291896] ata4.00: BMDMA stat 0x26 [ 179.291917] ata4.00: failed command: READ DMA EXT [ 179.291945] ata4.00: cmd 25/00:00:e0:0c:be/00:01:19:00:00/e0 tag 0 dma 131072 in [ 179.292039] ata4.00: status: { DRDY ERR } [ 179.292060] ata4.00: error: { ICRC ABRT } [ 179.292090] ata4: soft resetting link [ 179.464228] ata4.00: configured for MWDMA2 [ 179.464241] ata4: EH complete [ 179.512748] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 179.512792] ata4.00: BMDMA stat 0x26 [ 179.512815] ata4.00: failed command: READ DMA EXT [ 179.512843] ata4.00: cmd 25/00:00:e0:0d:be/00:01:19:00:00/e0 tag 0 dma 131072 in [ 179.512917] ata4.00: status: { DRDY ERR } [ sql server 2005 xp_readerrorlog ata4.00: error: { ICRC ABRT } [ 179.512966] ata4: soft resetting link [ 179.684225] ata4.00: configured for MWDMA2 [ 179.684240] ata4: EH complete [ 179.700434] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 179.700473] ata4.00: BMDMA stat 0x26 [ 179.700494] ata4.00: failed command: READ DMA EXT [ 179.700521] ata4.00: cmd 25/00:00:e0:0d:be/00:01:19:00:00/e0 tag 0 dma 131072 in [ 179.700595] ata4.00: status: { DRDY ERR } [ 179.700615] ata4.00: error: { ICRC ABRT } [ 179.700641] sap error ucoz soft resetting link [ 179.872236] ata4.00: read_dma udma icrc error for MWDMA2 [ 179.872252] ata4: EH complete [ 180.199133] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 180.199174] ata4.00: BMDMA stat 0x26 [ 180.199195] ata4.00: failed command: READ DMA [ 180.199220] ata4.00: cmd c8/00:30:e0:19:9d/00:00:00:00:00/e9 tag 0 dma 24576 in [ 180.199299] ata4.00: status: { DRDY ERR } [ 180.199320] ata4.00: error: { ICRC ABRT } [ 180.199348] ata4: soft resetting link [ 180.368237] ata4.00: configured for MWDMA2 [ 180.368251] ata4: EH complete [ 180.536754] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 180.536797] ata4.00: BMDMA stat 0x26 [ 180.536821] ata4.00: failed command: READ DMA [ 180.536847] ata4.00: cmd c8/00:08:08:19:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 180.536939] ata4.00: status: { DRDY ERR } [ 180.536959] ata4.00: error: { ICRC ABRT } [ 180.536988] ata4: soft resetting link [ 180.708230] ata4.00: configured for MWDMA2 [ 180.708242] ata4: EH complete [ 180.731496] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 180.731536] ata4.00: BMDMA stat 0x26 [ 180.731557] ata4.00: failed command: READ DMA [ 180.731582] ata4.00: cmd c8/00:08:18:19:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 180.731655] ata4.00: status: { DRDY ERR } [ 180.731676] ata4.00: error: { ICRC ABRT } [ 180.731703] ata4: soft resetting link [ 180.900303] ata4.00: configured for MWDMA2 [ 180.900322] ata4: EH complete [ 209.780320] ata4.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 209.780364] ata4.00: BMDMA stat 0x26 [ 209.780386] ata4.00: failed command: READ DMA [ 209.780415] ata4.00: cmd c8/00:08:30:1e:00/00:00:00:00:00/e0 tag 0 dma 4096 in [ 209.780490] ata4.00: status: { DRDY ERR } [ 209.780512] ata4.00: error: { ICRC ABRT } [ 209.780542] ata4: soft resetting link [ 209.952237] ata4.00: configured for MWDMA2 [ 209.952252] ata4: EH complete
View previous topic :: View next topic  
AuthorMessage
Lebkoungcity
Apprentice
Apprentice


Joined: 16 Nov 2008
Posts: 179
Location: near Lebkoungcity (='Gingerbreadcity' =Nuremberg)
PostPosted: Fri Jul 09, 2010 9:03 am    Post subject: ata messages in dmesg: It's not the cableReply with quote

Hi,

I recently bought a new WD-SATA-HDD and moved my system to it, read_dma udma icrc error. A few days ago I checked dmesg and found some repeating and slightly changing messages concerning ata. I don't really understand what it tries to tell me - and with my limited knowledge I don't find a something usefull for me, read_dma udma icrc error. So my questions are (hopefully) short ones: Should I worry about those messages? What can I do to solve the problem?

Regards,
Andy

dmesg
Quote:

ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:08:bd:ed:ff/00:00:00:00:00/e6 tag 0 dma 4096 in
res 51/84:00:bd:ed:ff/00:00:00:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:70:6d:c9:3e/00:00:00:00:00/e8 tag 0 dma 57344 in
res 51/84:4f:6d:c9:3e/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/133
ata1: EH complete
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA EXT
ata1.00: cmd 25/00:00:35:7a:d1/00:02:0c:00:00/e0 tag 0 dma 262144 in
res 51/84:1f:35:7a:d1/84:00:0c:00:00/e0 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/133 read_dma udma icrc error ata1: EH complete

[.]

ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:40:dd:18:42/00:00:00:00:00/e6 tag 0 dma 32768 in
res 51/84:0f:dd:18:42/84:00:0c:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
ata1.00: error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/100
ata1: EH complete

[.]

ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6
ata1.00: BMDMA stat 0x5
ata1.00: failed command: READ DMA
ata1.00: cmd c8/00:f8:5d:b8:37/00:00:00:00:00/e6 tag 0 dma 126976 in
res 51/84:a7:5d:b8:37/84:00:0c:00:00/e6 Emask 0x10 (ATA bus error)
ata1.00: status: { DRDY ERR }
read_dma udma icrc error error: { ICRC ABRT }
ata1: soft resetting link
ata1.00: configured for UDMA/100
ata1: EH complete

(please note the differences: UDMA/133 and then UDMA/100)

fdisk -l
Quote:

Platte /dev/hda: 82.3 GByte, 82348277760 Byte
255 Köpfe, 63 Sektoren/Spur, 10011 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0x000958df

Gerät boot, read_dma udma icrc error. Anfang Ende Blöcke Id System
/dev/hda1 1 13 104391 83 Linux
/dev/hda2 14 206 1550272+ 82 Linux Swap / Solaris
/dev/hda3 207 10011 78758662+ 83 Linux

Read_dma udma icrc error /dev/sda: 500.1 GByte, read_dma udma icrc error, 500107862016 Byte
255 Köpfe, 63 Sektoren/Spur, read_dma udma icrc error, 60801 Zylinder
Einheiten = Zylinder von 16065 × 512 = 8225280 Bytes
Disk identifier: 0x9131e6dd

Gerät boot, read_dma udma icrc error. Anfang Ende Blöcke Id System
/dev/sda1 * 1 7 56196 83 Linux
/dev/sda2 8 661 5253255 82 Read_dma udma icrc error Swap / Solaris
/dev/sda3 662 60801 483074550 83 Linux


smartctl --all /dev/sda
Quote:

smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model: Read_dma udma icrc error WD5000AADS-00S9B0
Serial Number: WD-WCAV95336385
Firmware Version: 01.00A01
User Capacity: 500.107.862.016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Fri Jul 9 10:56:52 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Disabled

SMART Disabled. Use option -s with argument 'on' to enable it.


after activating SMART and taking the short test:
smartctl --all /dev/sda
Quote:

smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model: WDC WD5000AADS-00S9B0
Serial Number: WD-WCAV95336385
Firmware Version: 01.00A01
User Capacity: 500.107.862.016 bytes
Device is: Not in smartctl database [for details use: -P showall]
ATA Version is: 8
ATA Standard is: Exact ATA specification draft version not indicated
Local Time is: Fri Jul 9 11:01:24 2010 CEST
SMART support is: Available - device has SMART capability.
SMART support is: Enabled

=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED

General SMART Values:
Offline data collection status: (0x85) Offline data collection activity
was aborted by an interrupting command from host.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (11160) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off support.
read_dma udma icrc error Suspend Offline collection upon new
read_dma udma icrc error command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer, read_dma udma icrc error.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported, read_dma udma icrc error.
Short self-test routine
recommended polling time: ( 2) minutes, read_dma udma icrc error.
Extended self-test routine
recommended polling time: ( 131) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303f) SCT Status supported.
SCT Feature Control supported.
SCT Data Table supported, read_dma udma icrc error.

SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 152 150 021 Pre-fail Always - 3400
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 67
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 180
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 65
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 23
193 Load_Cycle_Count 0x0032 199 199 000 Old_age Always - 5515
194 Temperature_Celsius 0x0022 103 096 000 Old_age Always - 40
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable read_dma udma icrc error 200 200 000 Old_age Variant getactiveobject word eolesyserror - 0
199 UDMA_CRC_Error_Count 0x0032 200 194 000 Old_age Read_dma udma icrc error - 8144
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

SMART Error Log Version: 1
No Errors Logged

SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
# 1 Short offline Completed without error 00% 180 -
# 2 Short offline Completed without error 00% 145 -

SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay, read_dma udma icrc error.


hdparm -I /dev/sda
Quote:

/dev/sda:

ATA device, with non-removable media
Model Number: WDC WD5000AADS-00S9B0
Serial Number: WD-WCAV95336385
read_dma udma icrc error Firmware Revision: 01.00A01
Transport: Serial, SATA 1.0a, SATA II Extensions, read_dma udma icrc error, SATA Rev 2.5, SATA Rev 2.6
Standards:
Supported: 8 7 6 5
Likely used: 8
Configuration:
Mysql fatal error uncaught max current
cylinders 16383 16383
heads 16 16
sectors/track 63 63
--
CHS current addressable sectors: 16514064
LBA user addressable sectors: smart error hdd regenerator
LBA48 user addressable sectors: 976773168
Logical/Physical Sector size: 512 bytes
device size with M = 1024*1024: 476940 MBytes
device size with M = 1000*1000: 500107 MBytes (500 GB)
cache/buffer size = unknown
Capabilities:
read_dma udma icrc error LBA, read_dma udma icrc error, IORDY(can be disabled)
Queue depth: 32
Standby timer values: spec'd by Standard, read_dma udma icrc error, with device specific minimum
R/W multiple sector transfer: Max = 16 Current = 16
Recommended acoustic management value: 128, current value: 254
DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5 udma6
read_dma udma icrc error read_dma udma icrc error Cycle time: min=120ns recommended=120ns
PIO: pio0 pio1 pio2 pio3 pio4
Cycle time: no flow control=120ns IORDY flow control=120ns
Commands/features:
Enabled Supported:
* SMART feature set
Security Mode feature set
* Power Management feature set
* Write cache
* Look-ahead
* Host Protected Area feature set
* WRITE_BUFFER command
* READ_BUFFER command
* NOP cmd
* DOWNLOAD_MICROCODE
Power-Up In Standby feature set
* SET_FEATURES required to spinup after power up
SET_MAX security extension
Automatic Acoustic Management feature set
* 48-bit Address feature set
* Device Configuration Overlay feature set
* Mandatory FLUSH_CACHE
* FLUSH_CACHE_EXT
* SMART error logging
* SMART self-test
* General Purpose Logging feature set
read_dma udma icrc error * 64-bit World wide name
* WRITE_UNCORRECTABLE_EXT command
* {READ,WRITE}_DMA_EXT_GPL commands
* Segmented DOWNLOAD_MICROCODE
* Gen1 signaling speed (1.5Gb/s)
* Native Command Queueing (NCQ)
* Host-initiated interface power management
* Phy event counters
* NCQ priority information
DMA Setup Auto-Activate optimization
* Software settings preservation
* SMART Command Transport (SCT) feature set
* SCT Long Sector Access (AC1)
* SCT LBA Segment Access (AC2)
* SCT Error Recovery Control (AC3)
* SCT Features Control (AC4)
* SCT Data Tables (AC5)
unknown 206[12] (vendor specific)
unknown 206[13] (vendor specific)
Security:
Master password revision code = 65534
supported
not enabled
not locked
not frozen
not expired: security count
read_dma udma icrc error supported: enhanced erase
114min for SECURITY ERASE UNIT. 114min for ENHANCED SECURITY ERASE UNIT.
Logical Unit WWN Device Identifier: 50014ee102c81fcf
NAA : 5
IEEE OUI : 0014ee
Unique ID : 102c81fcf
Checksum: correct

_________________
"The most dangerous world view is the world view of the ones who haven't viewed the world."
Alexander von Humboldt (1769-1859)

Last edited by Lebkoungcity on Sun Aug 01, 2010 11:43 am; edited 3 times in total
Back to top
View user's profileSend private message
eccerr0r
Watchman
Watchman


Joined: 01 Jul 2004
Posts: 9050
Location: almost Mile High in the USA
PostPosted: Sat Jul 10, 2010 1:42 pm    Post subject: Reply with quote

It looks like the errors you are seeing are interface problems as seen as ICRC and UDMA errors. Check cable for interference and connectors, or possibly replace cable.
_________________
Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching?
Back to top
View user's profileSend private message
Lebkoungcity
Apprentice
Apprentice


Joined: 16 Nov 2008
Posts: 179
Location: near Lebkoungcity (='Gingerbreadcity' =Nuremberg)
PostPosted: Sat Jul 10, read_dma udma icrc error, 2010 2:24 pm    Post subject: Reply with quote

Thanks a lot for your answer!

It matches with the increasing number in the 199 UDMA_CRC_Error_Count-line (from last post 8144 to 8256):

smartctl -A /dev/sda
Quote:

smartctl version 5.38 [i686-pc-linux-gnu] Copyright (C) 2002-8 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0
3 Spin_Up_Time 0x0027 150 150 021 Pre-fail Always - 3466
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 71
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0
9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 202
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 69
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 23
193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always - 6680
194 Temperature_Celsius 0x0022 098 096 000 Old_age Always - 45
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0
199 UDMA_CRC_Error_Count 0x0032 200 194 000 Old_age Always - 8256
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline - 0

_________________
"The most dangerous world view is the world view of the ones who haven't viewed the world."
Alexander von Humboldt (1769-1859)
Back to top
View user's profileSend private message
Lebkoungcity
Apprentice
Apprentice


Joined: 16 Nov 2008
Posts: 179
Location: near Lebkoungcity (='Gingerbreadcity' =Nuremberg)
PostPosted: Mon Jul 12, read_dma udma icrc error, 2010 6:24 pm    Post subject: Reply with quote

eccerr0r wrote:
It looks like the read_dma udma icrc error you are seeing are interface problems as seen as ICRC and UDMA errors, read_dma udma icrc error. Check cable for interference and connectors, or possibly replace cable.


Unfortunately it wasn't the cable. Today I bought a new one and it gives me the same errors. :-(

Is there anything else I can check?

Could it be a mis-configured kernel module?
I think I need the via_sata module? Or something else? Is there some way to configure it?

Please help me - My system goes down to UDMA/33. :evil:
Thanks in advance!!!

Code:

lspci

00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev 80)
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237/VX700 PCI Bridge
00:0a.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
00:0b.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 02)
00:0b.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 02)
00:0c.0 Multimedia audio controller: ESS Technology ES1969 Solo-1 Audiodrive (rev 01)
00:0d.0 Communication controller: NetMos Technology PCI 1 port parallel adapter (rev 01)
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master Android setonclicklistener error (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc, read_dma udma icrc error. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc, read_dma udma icrc error. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, read_dma udma icrc error, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: nVidia Corporation NV43 [GeForce 6600] (rev a2)

_________________
"The most dangerous world view is the world view of the ones who haven't viewed the world."
Alexander von Humboldt (1769-1859)
Back to top
View user's profileSend private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 51030
Location: 56N 3W
PostPosted: Mon Jul 12, 2010 6:51 pm    Post subject: Reply with quote

Lebkoungcity,

Google tells us that your drive is SATA 2, read_dma udma icrc error.
Code:
WD Caviar Green WD5000AADS - hard drive - 500 GB - SATA-300


Your SATA controller is
Code:
 00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)

which is a SATA 1 device, read_dma udma icrc error.

SATA 2 devices connected to SATA 1 controllers are supposed to fall back to SATA 1 speeds. Many don't and produce the errors you are seeing.
Most drives have a tiny jumper that you set to force SATA1 data rates.

See the bottom of this page
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profileSend private message
krinn
Watchman
Watchman


Joined: 02 May 2003
Posts: 7467

PostPosted: Mon Jul 12, 2010 7:49 pm    Post subject: Reply with quote

last time i plug-in a sata2 on a sata1 controller without the jumper the drive wasn't handle at all.

As i already said in another thread about drive, if the kernel can't make the drive functional at its proper standard, read_dma udma icrc error, kernel will try to lower the standard until it can make it work without errors.
That's why your kernel pickup a lower standard, because kernel see the errors and try to pickup a lower standard to correct the issue (in fact, it's not a bad idea, a bad 80pins cable might work ok as a 40pins cable, so lowering standard to reach only 40pins usage ee error compiling keymap server-0 make it work). Hence the dma133, dma100. fall

Anyway, read_dma udma icrc error, your drive is simply dying, even newer things can die, sometimes your fault (running the drive in a too hot conditions, or extreme ambient humidity. like you can get in some countries), read_dma udma icrc error the drive itself with a faulty manufacturing, read_dma udma icrc error.

so if it's not the cable, it might be the controller, an irq conflict or the drive.
sadly for you, if we consider the drive let you install your previous gentoo on it, read_dma udma icrc error, then irq conflict is not the solve, read_dma udma icrc error, leaving the controller or the drive in fault, i would put my bet on the drive as this thing are more sensible (more mechanical parts) than a controller.

As noone suggest you yet, but as a wise man have in its sig
Quote:
Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.




(and but i must admit, read_dma udma icrc error, this is really a personal thinking there: avoid green hdd, more trouble than benefits)
Back to top
View user's profileSend private message
eccerr0r
Watchman
Watchman


Joined: 01 Jul 2004
Posts: 9050
Location: almost Mile High in the USA
PostPosted: Tue Jul 13, 2010 12:46 am    Post subject: Reply with quote

Not that this is necessarily a useful comment, but I despise all VIA products, and will carefully scrutinize any VIA application. I have a VT6420 SATA board and it has proven to be somewhat unreliable, read_dma udma icrc error. I'd chalk this one to incompatibility with the drive and the SATA host adapter.

But the question is, are you noticing any problems? SATA should detect these UDMA CRC errors and retry them, so it should be fairly transparent other than speed hiccups when read_dma udma icrc error occur, read_dma udma icrc error. Is this the case?
_________________
Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching?
Back to top
View user's profileSend private message
Lebkoungcity
Apprentice
Apprentice


Joined: 16 Nov 2008
Posts: 179
Location: near Lebkoungcity (='Gingerbreadcity' =Nuremberg)
PostPosted: Fri Jul 16, 2010 7:56 am    Post subject: Reply with quote

NeddySeagoon:

Sorry that I did not include this information - you're absolutely right and I had to set the jumper to 1.5 Gb/s have the HDD recognized by my system. The next step I took was to boot a live-system, read_dma udma icrc error, copy my gentoo installation from my PATA-drive to the SATA and did some changes e.g. in /etc/fstab. Then I booted from successfully from the SATA.

krinn:

Yes, I understand the mechanism that leads to the lower speed setting - and I also think that it's a good idea to have such a thing. After reading your post I decided to contact WD-support. Until now I have no real answer from them (I included the outputs of lspci, read_dma udma icrc error, smartctrl --all /dev/sda and the errors in dmesg as a txt-file - in their answer they complained that they could not open this sort of file. I should send the informations as pdf. and: I should use their diagnostic tool - which is provided for Window$.), and after sending them a answer I'm still waiting for response.

eccerr0r:

When the CRC errors occur I notice that the system gets painfull slow when accessing the SATA-HDD. I wouldn't call it a hiccup as the system doesn't come back to normal speed but stays in e.g. UDMA/33 until reboot. Despite of this I don't notice any other problems (maybe they're there but until now I don't see any). So if it would recover to UDMA/133 I think I could live with it.
Yes, read_dma udma icrc error, I understand why you don't like VIA products - unfortunately it is the only mainboard I have. if nothing helps: What kind of controller would you recommend? (I think of getting a not too expensive PCI-controller-card as a last resort - a new mainboard with a faster CPU, better and more RAM, a faster PCIe-graphics-card would be fancy, but I don't have the money and also I have no real need for a more powerfull system.)


Thanks for all the support I get here!
Cheers, read_dma udma icrc error,
Andy
_________________
"The most dangerous world view is the world view of the ones who haven't viewed the world."
Alexander von Humboldt (1769-1859)
Back to top
View user's profileSend private message
Lebkoungcity
Apprentice
Apprentice


Joined: 16 Nov 2008
Posts: 179
Location: near Lebkoungcity (='Gingerbreadcity' =Nuremberg)
Back to top
View user's profileSend private message
NeddySeagoon
Administrator
Administrator


Joined: 05 Jul 2003
Posts: 51030
Location: 56N 3W
PostPosted: Fri Jul 30, read_dma udma icrc error, 2010 3:10 pm    Post subject: Reply with quote

Lebkoungcity,

Spread spectrum clocking is an EMC reduction technique.
Essentially, it spreads the interference over a range of frequencies by jittering the clock frequency.

If this fixed your interface problems you probably have poor quality SATA cables, or they are run too close to something else with a similar clock frequency or both. The important point is that your system has a noise margin problem and it will still be marginal now.
_________________
Regards,

NeddySeagoon

Computer users fall into two groups:-
those that do backups
those that have never had a hard drive fail.
Back to top
View user's profileSend <a href=configure error c compiler message">
krinn
Watchman
Watchman


Joined: 02 May 2003
Posts: 7467

PostPosted: Fri Jul 30, 2010 5:11 pm    Post subject: Reply with quote

oh the drive is green WD one, check this thread (i love quoting myself, but i also love to refer to myself too !)

https://forums.gentoo.org/viewtopic-p-6354995-highlight-green.html#6354995

this is for the WD15EARS, but it's also a green hdd from WD.
if not aware of the issue before, try align your partitions (say thx to green shit) and good luck with the re-install :)
Back to top
View user's profileSend private message
Lebkoungcity
Apprentice
Apprentice


Joined: 16 Nov 2008
Posts: 179
Location: near Lebkoungcity (='Gingerbreadcity' =Nuremberg)
PostPosted: Sun Aug 01, 2010 12:19 pm    Post subject: Reply with quote

Thanks for your answers!

NeddySeagoon:
Apparently, this was not the solution :evil: The errors came back just in the moment I thought I tracked down the cause.
Now I'm done - tomorrow I'm sending the drive back to it's creator for RMA., read_dma udma icrc error.

WD-support wrote:
Quote:

Ihr Fehler zeigt eindeutig, dass es ein Problem bei der Uebertragung der Daten von Ihrer Festplatte auf den Computer und umgekehrt gibt. Da Sie das Kabel bereits ausgetauscht haben liegt der Fehler bei der Festplattenelektronik. Leider koennen wir Ihnen da keine Hilfe anbieten, ausser einen Umtausch der Festplatte.

Der Fehler kann entweder an einer defekten Festplatten-Platine oder einer korrupten Firmware liegen.


Quote:

Your error shows clearly know that there is a problem with the transmission of data from your HDD to the computer and vice versa. Since you have already replaced the cable the fault lies with the HDD-electronics. Unfortunately, we can offer you no help except an exchange of the HDD.

The error can be either be caused by a defective HDD-circuit-board or corrupt firmware.


krinn:
Thanks for the hint. But speed wasn't that much of a problem - only when the CRC-errors occurred and the HDD was limited from UDMA/133 down to UDMA/100 and finally to UDMA/33.
_________________
"The most dangerous world view is the world view of the ones who haven't viewed the world."
Alexander von Humboldt (1769-1859)
Back to top
View user's profileSend private message
eccerr0r
Watchman
Watchman


Joined: 01 Jul 2004
Posts: 9050
Location: almost Mile High in the USA
PostPosted: Sun Aug 01, 2010 1:51 pm    Post subject: Reply with quote

I wouldn't call being stuck at UDMA33 "painfully slow". yes, it's slow but still tolerable. I'd much prefer being stuck at UDMA33 speeds than have data corruption with it running at UDMA133 speeds and missing clocks.
I would not call this a fault of the drive, read_dma udma icrc error, and I would have to feel pain for WD for problems Via caused. I still would start the blame on Via for your issues not WD (though I can't rule out WD till it's proven to be one or the other).

For add-on boards it's the brand of board that tends to matter more than necessarily chipset; but I think Silicon Logic-based boards tends to be of higher quality than Via based boards; but YMMV - I actually have not tried them myself. But one thing I -have- tried is JMicron, which should be another cheap low end solution (which tends to also end up in cheap, poor solutions), but had fairly good success with it, read_dma udma icrc error. Note that the JMicron I have tested is PCIe.
_________________
Intel Core i7 2700K/Radeon R7 250/24GB DDR3/256GB SSD
What am I supposed watching?
Back to top
View user's profileSend private message
joecool
n00b
n00b


Joined: 31 Aug 2004
Posts: 31

PostPosted: Tue Sep 28, 2010 6:10 am    Post subject: Reply with quote

Figured I'd post a followup to this. I have the same VIA VT6420 on an Asus A8V Deluxe and it's 100% worthless with even the jumper set on a WD20EARS, read_dma udma icrc error, yes it will finally pick it up but it will shit those errors out everywhere.

This board has an onboard promise controller which works flawless with the drives, and also a PCI silicon image chip which also works flawless. The VIA SATA-I southbridge controllers just suck. Do yourself a favor and buy a controller card if you want to use SATA-II drives on your motherboard.
Back to top
View user's profileSend private message
Cyker
Veteran
Veteran


Joined: 15 Jun 2006
Posts: 1746

PostPosted: Tue Sep 28, 2010 11:12 am    Post subject: Reply with quote

Seconded; VIA SATA chipsets are terrible and it's the first thing I'd blame.

They really won't work with SATA2 drives properly; You NEED a SATA1 drive, read_dma udma icrc error.

Having a SATA2 drive and jumpering it to 1.5GB/s does NOT make it a SATA1 drive on recent SATA2 disks, and although they will work better, they will still have issues! The Via seems to rely on some quirks of SATA1 which were fixed in SATA2 I guess.

If your mobo has PCIe, there are many many options; Silicon Image and Marvel chipsets see quite popular and common for PCIe expansion 'boards and they work pretty well. They're also dead cheap, read_dma udma icrc error.

If you only have PCI, you are shafted as 99% of SATA controllers for PCI seem to use the hated VT6421 SATA controller chip which is one of the buggiest pieces of crap I ever wasted money on.

I was able to (eventually!) locate a PCI card based on the Silicon Image Sil3512 which work pretty well, read_dma udma icrc error, although the one I got was from eBay and didn't support firmware upgrading as the flash chip was replaced with a ROM!!! :evil:


But think about getting a new mobo; Unlike Windows you can still use your same Gentoo with it; Just recompile the kernel to support the new hardware. Not sure who has the best SATA chipsets ATM; ATI/AMD had a terrible reputation but I don't know if they've solved this yet. nVidia is pretty solid and boring. Intel had a good reputation but some of their recent SATA chipsets have had troubles in Linux apparently unless the BIOS is configured correctly.
Back to top
View user's profileSend private message

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum

Pata sch

Intel SCH IDE

Hardware Support

Intel US15X, US15W, US15L, UL11L chipsets IDE controller

Modes Supported

PIO, MWDMA, UDMA

Limitations

None

Known Problems

The PATA_SCH driver has problems detecting 40 wire cable and hence the correct UDMA mode on some systems. Specifically we see the following ATA error messages in the dmesg log when IDE hard drive and CD-ROM are present on the cable:

[ 4.278671] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 4.278769] ata1.00: BMDMA stat 0x64 [ 4.278856] ata1.00: failed command: READ DMA [ 4.278950] ata1.00: cmd c8/00:20:70:ca:ab/00:00:00:00:00/e0 tag 0 dma 16384 in [ 4.278953] error sorry the internal installation failed res 51/84:00:8f:ca:ab/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 4.279238] ata1.00: status: { DRDY ERR } [ 4.279322] ata1.00: error: { ICRC ABRT } [ 4.279429] ata1: soft resetting link [ 4.656816] ata1.00: configured for UDMA/100 [ 4.688263] ata1.01: configured for UDMA/33 [ 4.689038] ata1: EH complete [ 4.703657] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 [ 4.703749] ata1.00: BMDMA stat 0x64 [ 4.703834] ata1.00: failed command: READ DMA [ 4.703928] ata1.00: cmd c8/00:20:70:ca:ab/00:00:00:00:00/e0 tag 0 dma 16384 in [ 4.703931] res 51/84:00:8f:ca:ab/00:00:00:00:00/e0 Emask 0x10 (ATA bus error) [ 4.704163] ata1.00: status: { DRDY ERR } [ 4.704249] ata1.00: error: { ICRC ABRT } [ 4.704355] ata1: soft resetting link [ 5.081245] ata1.00: configured for UDMA/100 [ 5.112262] ata1.01: configured for UDMA/33 [ 5.113026] ata1: EH complete

One work around to get rid of these messages is to pass the following kernel boot parameters:

libata.force=40c

but surely it would be nice if Linux can handle this situation more gracefully.

For more details please see the [thread] on linux-ide mailing list, read_dma udma icrc error.

Module Options

None

You can watch a thematic video

How To Fix Computer SMART Status Bad Error / S.M.A.R.T Status Bad Solution

0 Comments

Leave a Comment