Oki 9650 error 133

oki 9650 error 133

MB Memory-Modul for OKI Printer CX, C C MPSc C, MCMFP, CXMFP. SKU: rama4; Manufacturers: OKI Error Correction, Non-ECC. Maintenance Manual Oki C, C;This manual, Oki C, C, ID Check Pattern Print (“TEST PRINT MENU” Item). PU Error. OKI MC - Yellow part of image comes out shifted about 5mm down. russc; Jan 10, Oki C and bad NIC / USB port??? Help Oki C Error.

Error Messages

Message

Error code

Indicator

Cause/Solution

Detected an abnormality of internal database.

The data must be deleted.

After pressing [Enter], the data will be deleted, and then reboot.

-

-

Database in the machine has been broken.

Press «ENTER» button.

PU Flash Error

-

Goes off

Turn off the machine, and then back on.

If the same error occurs, contact your dealer.

Data Present

-

-

Data remains unprinted.

To manually print, press «ON LINE» button.

To delete the data without printing, press «CANCEL» button.

Changing Language

Please wait

-

Blinks

Display language is being changed.

Wait for a while.

Language Change Failed

Error num: %CODE%

-

Blinks

Switching display languages failed.

Press the power button to turn off the machine, and then back on.

XXX

%COLOR% Toner Low.

Search keyword: P

-

Lights up

The toner indicated on the screen is low. Have a new toner cartridge ready.

And replace the old image drums with new ones after a message for replacement of image drum appears.

XXX

%COLOR% Waste Toner Full. Replace Toner.

Search keyword: P

-

Lights up

Waste toner is full. Replace with a new toner cartridge of the indicated color.

The printer can be 79 00 fe error for a while when the front cover is opened and closed. However, replace with a new toner cartridge quickly as the image drum might become damaged.

XXX

%COLOR% Toner Sensor Error.

%COLOR% Non Recommended Toner.

Search keyword: Oki 9650 error 133 up

An optimum toner cartridge is not installed.

Use a toner cartridge that oki 9650 error 133 your machine.

The print quality is not guaranteed.

XXX

Toner Sensor Error.

Search keyword: P

,oki 9650 error 133,

Lights up

Something is wrong with the toner sensor of the indicated color or the image drum is not installed correctly.

Install the toner cartridge or image drum of the indicated color correctly.

If the error occurred in Yellow (Y) or Magenta (M), make sure that the blue knob on the belt unit is turned sideway.

If the same error occurs, contact your dealer.

Yellow, Magenta (red), Cyan (blue), Black

XXX

Error Postscript

-

-

A postscript error has occurred.

The job has been dismissed.

XXX

PDL Error Occurred

-

-

PDL error has occurred.

To erase the message, press «ENTER» button.

XXX

%COLOR% Image Drum Near Life.

Search keyword: P

-

Lights up

Prepare new image drums.

And replace the old image drums ssl error 61 citrix mac os x new ones oki 9650 error 133 a message for replacement of image drum appears.

XXX

Fuser Unit Near Life.

Search keyword: P

-

Lights up

Prepare a new fuser unit.

And replace the old fuser unit with new ones after a message for replacement of fuser unit appears.

XXX

Belt Unit Near Life.

Search keyword: P

-

Lights up

Prepare a new belt unit.

And replace the old belt unit with new ones after a message for replacement of belt unit appears.

XXX

Non Recommended Fuser Unit Detected.

Search keyword: P

-

Lights up

An optimum fuser unit is not installed.

Use a fuser unit that matches your machine.

The print quality is not guaranteed.

XXX

Change Fuser Unit.

Search keyword: P

-

Lights up

The fuser unit reaches its lifetime.

Replace the fuser unit with a new one.

XXX

Non Recommended Belt Unit Detected.

Search keyword: P

-

Lights up

An optimum belt unit is not installed.

Use a belt unit that matches your machine.

The print quality is not guaranteed.

XXX

Change Belt Unit.

Search keyword: P

-

Lights up

The belt unit reaches its lifetime.

Replace the belt unit with a new one.

XXX

%COLOR% Toner Empty.

Search keyword: P

-

Lights up

The toner indicated on the screen is empty. Replace the empty toner cartridge with a new one.

XXX

%COLOR% Toner Not Installed.

Search keyword: P

-

Lights up

The toner cartridge of the indicated color is not installed correctly.

Install the toner cartridge correctly.

XXX

%COLOR% Non Recommended Image Drum Detected.

Search keyword: P

-

Lights up

An errore e077 rj 900 image drum is not installed.

Use a image drum that matches your machine.

The print quality is not guaranteed.

XXX

%COLOR% Image Drum Life.

Search keyword: P

-

Lights up

The image drum indicated on the screen reaches its lifetime.

Replace the image drum with a new one.

XXX

%COLOR% Image Drum Life, %PAGES% Pages Left.

Search keyword: P

-

Lights up

The image drum indicated on the screen reaches its lifetime.

The number of pages you can print is displayed in "%PAGES%".

XXX

%COLOR% Image Drum Life, Print Quality Not Guaranteed.

Search keyword: P

-

Lights up

The image drum indicated on the screen reaches its lifetime.

Replace the image drum with a new one.

The print quality is not guaranteed.

XXX

%TRAY% Empty

-

Lights up

No paper is loaded in the indicated tray.

Load paper.

Other trays are available.

XXX

File System is Full

-

Lights up

Memory in the file system is full.

Delete unnecessary files.

XXX

File System is Write Protected

-

Lights up

The file you are trying to write is write-protected.

Contact the printer administrator.

XXX

File Erasing

-

Lights up

Stored document files are being deleted.

Wait for a while.

Deleting data

-

Lights up

This machine ran out of color toner. Color print data is being deleted.

Wait for a while.

XXX

Deleting data

-

Lights up

Deleting data stored in private printing.

Wait for a while.

XXX

Erased Data Full

-

Lights up

Files supposed to be deleted are full. Erase the files.

XXX

Wait Timeout is Disabled

-

Lights up

Wait Timeout is disabled.

XXX

Job Log Buffer Full(Delete old logs)

-

-

Old job logs were deleted, because job log buffer was full.

XXX

NFC Unit Error. NFC function is not available.

Press ONLINE Oki 9650 error 133 is something wrong in the NFC unit.

Functions related to the NFC are not available.

Turn off the machine, and then back on.

If the same error occurs, contact your dealer. To hide this message, select [Admin Setup] > [Others Setup] > [NFC Setup], and then select [Disable].

XXX

USB Hub Unsupported

Please detach it

-

-

A USB hub is connected. Remove the USB hub.

This machine does not support USB hub.

XXX

Unsupported USB Device Detected

Please detach it

-

-

An unsupported USB device is connected.

Remove the USB device.

XXX

Incompatible USB device connected

Please detach it

-

-

An unsupported USB device is connected.

Remove the USB device.

XXX

No communication with the SNTP server.

-

-

Obtaining current time from the SNTP server failed.

Check the server or network connection.

XXX

Getting target IP failed. Please check DHCP settings.

-

-

The DHCP server cannot be detected.

Check the network connection.

XXX

Collate Fail:Too Many Pages

Press ONLINE Button

-

-

A collate print error has occurred.

Reduce the data amount. If that does not work, reduce the size of the print data.

To erase the message, oki 9650 error 133, press «ONLINE» button.

XXX

Failed to read or write the usage management information of Print Quantity

Press ONLINE Button

-

Lights up

The usage management information could not be read.

Press «ONLINE» button.

XXX

Duplex Print Failed

Press ONLINE Button

-

Lights up

For the paper setting that a duplex printing is not possible, it was printed in simplex.

Check the size and thickness of paper.

XXX

Color Restricted. Mono Printed

Press ONLINE Button

-

Lights up

A color print job was converted to a mono print job due to an unauthorized user. Contact your administrator for color printing.

To erase the message, press «ONLINE» button.

XXX

Color Restricted. Job Runtime error 62 pastel ONLINE Oki 9650 error 133 up

A color print job was deleted due to an unauthorized user. Contact your administrator for color printing.

To erase the message, press «ONLINE» button.

XXX

Print Restricted. Job Rejected

Press ONLINE Button

-

Lights up

A print job was deleted due to an unauthorized user. Contact your administrator for printing.

To erase the message, oki 9650 error 133, press «ONLINE» button.

XXX

Log Buffer is Full. Job Rejected

Press ONLINE Button

-

Lights up

Print data is deleted because the accounting log buffer is full.

Contact a printer administrator and remove the log buffer.

XXX

Expired saved files have been deleted

Press ONLINE Button

-

Lights up

Private printing files whose storage period expired were automatically deleted.

To erase the message, press «ONLINE» button.

XXX

E-mail receiving has been cancelled

Press ONLINE Button

-

Lights up

Indicates that Email receiving has been canceled.

It has the following possibilities.

  • The format of email that has received is illegal or not supported.

  • The attached file is illegal or not supported.

  • The attached file that has received is too large.

  • Network connection has pioneer error 17 System Operation failed <nnn>

    Press ONLINE Button

    -

    Lights up

    An error has occurred in the file system.

    To erase the message, press «ONLINE» button.

    XXX

    Invalid Print Data Received

    Press ONLINE Button

    -

    -

    Invalid data received.

    If you performed private printing, the data was deleted because it was incomplete. Print again.

    To erase the message, press «ONLINE» button.

    XXX

    Job Log Database Error

    Contact the device administrator

    Press ONLINE Button

    -

    -

    A data base access error has occurred while writing or reading the job log.

    Turning off and on the machine may resolve the problem.

    To erase the message, press «ONLINE» button.

    XXX

    IPv4 Address is conflicted

    Change IPv4 Address

    -

    -

    The IP address assigned to this machine is duplicated with that of another device.

    Check the IP addresses, and then assign another IP address.

    XXX

    Error PDF

    Press ONLINE Button

    -

    -

    The PDF file is damaged.

    Check the file.

    To erase the message, press «ONLINE» button.

    XXX

    Invalid Password

    Press ONLINE Oki 9650 error 133 that the entered password does not match the password set to encrypted PDF.

    The file will not be printed unless the passwords match.

    XXX

    PDF Cache Write Error

    Press ONLINE Button

    -

    -

    Notifies that writing a PDF file to the cache has failed.

    To erase the message, press «ONLINE» button.

    XXX

    Decode error occurred

    Press ONLINE Button

    -

    -

    Indicates that an error has occurred during analysis of image data input from an external source.

    This appears when an error has occurred during analysis of TIFF or JPEG data in USBMemoryPrint, DirectPrint, E-mailPrint mode.

    To erase the message, press «ONLINE» button.

    XXX

    Can not read the file

    Press ONLINE Button

    -

    -

    The USB Memory was removed while printing from USB Memory. Do not remove USB Memory while printing is in progress.

    To erase the message, press «ONLINE» button.

    XXX

    Color toner empty. Job cancelled

    Press ONLINE Button

    -

    -

    The print data was cancelled because color toner is empty.

    To erase the message, press «ONLINE» button.

    XXX

    Job Type restricted

    Job rejected

    Press ONLINE Button

    -

    -

    A job of a JobLimitation setting violation is received, and when discarding the job, it's indicated.

    To print this job, contact the printer administrator.

    Install Paper

    MPTray

    %MEDIA_SIZE%

    Press ONLINE Button

    -

    Goes off

    Manual Printing from the MP tray is specified.

    Load the paper of the size indicated in the MP tray, and then press the «ONLINE» button.

    Change Paper in %TRAY%

    %MEDIA_SIZE%

    %MEDIA_TYPE%

    Press ONLINE Button

    Please see HELP for details

    ,

    Blinks

    Paper loaded on the indicated tray does not match selected paper size. Check the paper settings on the application and on the tray, and match the settings.

    Tray 1, Tray 2, Tray 3, Tray 4, Tray 5

    Change Paper in MPTray

    %MEDIA_SIZE%

    %MEDIA_TYPE%

    Press ONLINE Button

    Please see HELP for details

    Blinks

    Paper loaded on the MP tray does not match selected paper size. Check the paper settings on the application and on the MP tray, and match the settings.

    Change Paper in %TRAY%

    %MEDIA_SIZE%

    %MEDIA_TYPE%

    Press ONLINE Button

    Please see HELP for details

    ,

    Blinks

    Paper loaded on the indicated tray does not match selected paper size. Check the paper settings on the application and on the tray, oki 9650 error 133, and match the settings.

    For paper which can be set both horizontally and vertically, check the direction of paper.

    Tray 1, Tray 2, Tray 3, Tray 4, Tray 5

    Install Paper

    MPTray

    %MEDIA_SIZE%

    Press ONLINE Button

    Please see HELP for details

    Blinks

    Paper loaded on the MP tray does not match selected paper size. Check the paper settings on the application and on the MP tray, and match the settings.

    For paper which can be set both horizontally and vertically, check the direction of paper.

    Summary Account balance is 0.

    %USERNAME%

    %ACCOUNTNAME%

    Increase the balance and press [Enter]

    Press [Cancel] to cancel.

    -

    Blinks

    The number of print jobs excesses the limit.

    No more print jobs are authorized.

    Contact the printer administrator.

    Remove Paper

    Output Tray

    Please see HELP for details

    Blinks

    Paper in the output tray is full.

    Remove the handout.

    Press ONLINE Button for Restoration

    Memory Overflow

    Please see HELP for details

    Blinks

    Data is too complicated.

    Memory full error has occurred during processing.

    Reduce the volume of the print data.

    If the same error is displayed again, contact your dealer.

    Insufficient memory.

    If using multiple functions, youtube 500 internal server error the function being used before attempting another.

    If the problem does not improve, reduce the resolution.

    Press Oki 9650 error 133 Button

    -

    Blinks

    Memory is full.

    Print after the ongoing operation is oki 9650 error 133 the error persists, oki 9650 error 133, lower the image oki 9650 error 133 on the printer driver.

    Wireless startup failed

    Press ONLINE Button

    Please see HELP for details

    -

    Restart this machine.

    If the error still persists even after the reboot, power off this machine and check if the wireless LAN module is installed.

    If the wireless LAN module is not installed, set [Wireless Module] in [Boot Menu] to [Disable].

    If the wireless LAN module is installed, check if the model name of the wireless LAN module is compatible with this machine.

    If the model name is incorrect, replace the wireless LAN module with the one suitable for this machine.

    If the model name is correct, contact your dealer.

    This wireless firmware version does not oki 9650 error 133 on this device

    Press ONLINE Button

    Please see HELP for details

    -

    The version of the firmware does not match this machine.

    Contact your dealer.

    Wireless settings are incomplete

    Press ONLINE Button

    Please see HELP for details

    -

    Wrong values are set or items remain unset in the wireless LAN settings.

    Check the wireless settings.

    If the error persists, initialize the network settings, and set up the wireless LAN settings again.

    Not connected to wireless access point

    Press ONLINE Button

    Please see HELP for details

    -

    No wireless LAN access points are found.

    Make sure that the access console gethostbynameconsole host lookup error is turned on.

    Disconnect and re-connect to wireless LAN.

    Wait a Moment

    Message Data Processing

    -

    -

    Updating messages displayed on the operator panel.

    Please wait.

    Wait a Moment

    Message Data Writing

    -

    -

    Updating messages displayed on the operator panel.

    Please wait.

    Power Off/On

    Message Data Received OK

    -

    -

    Updating messages displayed on the operator panel is completed.

    Turn the power of the printer off and on again.

    Check Data

    Message Data Write Error<%CODE%>

    -

    -

    Writing of message data to be uploaded to a printer has been failed.

    Check if the message data to be updated matches the printer.

    Press ONLINE Button for Restoration

    Receiving Data Timeout

    Please see HELP for details

    Blinks

    When receiving data by Port, LPR, FTP, IPP, oki 9650 error 133, WSD, or Email, a timeout occurred in stream.

    Firmware Update Error

    Please try again

    If network doesn't work, please try firmware update over USB

    -

    -

    Updating the firmware failed.

    Update again.

    Install Paper

    %TRAY%

    %MEDIA_SIZE%

    Please see HELP for details

    ,

    Blinks

    No paper is loaded in the indicated tray. Load paper of the displayed size.

    Tray 1, Tray 2, Tray 3, Tray 4, Tray 5

    Install Paper

    MPTray

    %MEDIA_SIZE%

    Please see HELP for details

    Blinks

    MP tray is empty.

    Set paper.

    If paper is set, paper set cover is not set. Lower the paper set cover.

    Install Paper Cassette

    %TRAY%

    Please see HELP for details

    ,,oki 9650 error 133,

    Blinks

    A paper cassette is not in the indicated tray.

    Insert the paper cassette into the indicated tray.

    If the cassette is already inserted in the printer, oki 9650 error 133, pull out the cassette and set it again to correctly locate it.

    , Tray 1

    , Tray 2

    , Tray 3

    , Tray 4

    Tray 5

    Replace Toner

    %COLOR% Waste Toner Full

    Please see HELP for details

    ,

    Blinks

    Waste toner of the toner cartridge is full. Opening and closing the front cover can resume printing for a while, but it may damage the image drum. Replace the toner cartridge with a new one as soon as possible.

    Magenta (red), Cyan (blue)

    Install Oki 9650 error 133 see HELP for details

    ,

    Blinks

    The indicated cartridge ran out of toner.

    Opening and closing the front cover can resume printing for a while, but it may damage the image drum. Replace the toner cartridge with a new one as soon as possible.

    Yellow, Magenta (red), Cyan (blue), Black

    Non Recommended Toner

    %COLOR%

    Please see HELP for details

    , oki 9650 error 133,,,oki 9650 error 133,,

    Blinks

    The indicated toner cartridge is not optimum.

    We recommend using an optimum toner cartridge.

    , Yellow

    , Magenta (red)

    , Cyan (blue)

    ,Black

    Toner Not Installed

    %COLOR%

    Please see HELP for details

    ,

    Blinks

    The supplied starter toner cartridges are installed in the consumable image drums.

    Install the consumable toner cartridges in the consumable image drums.

    Yellow, Magenta (red), oki 9650 error 133, Cyan (blue), Black

    Non Recommended Image Drum

    %COLOR%

    Please see HELP for details

    ,,,,

    Blinks

    The indicated image drum is not optimum.

    We recommend using an optimum Image Drum.

    , Yellow

    , Magenta (red)

    ,oki 9650 error 133,Cyan (blue)

    , Black

    Image Drum Not Installed

    %COLOR%

    Please see HELP for details

    ,oki 9650 error 133,

    Blinks

    The indicated image drum is not installed.

    Install the image drum.

    Yellow, Magenta (red), Cyan (blue), Black

    Caution: Non-Genuine Consumable detected

    Check user's manual "Trouble Shooting" to restore machine operation

    Blinks

    This error means that a non-OKI Original consumable has been installed in the machine.

    The warranty is applicable when the product is used with its designated OKI Original consumables. Use caution when choosing other consumables. The entire risk as to the quality and performance of the product due to the use of non-OKI Original consumables is with you. Should the product prove defective due to non-OKI Original consumables, you assume the cost of all necessary servicing, repair or correction, as our warranty may not cover these defects.

    To accept these risks and to restore function:

    1) Turn off your printer.

    2) Turn the machine on. Press the «CANCEL» button when [PLEASE WAIT] is displayed.

    3) Release the «CANCEL» button when [Ready To Print] is displayed.

    Note: This oki 9650 error 133 will be recorded for future reference.

    Paper jam occurred

    Paper remained in %NUM% place(s)

    Remove the paper

    Press Help for details

    ,oki 9650 error 133,

    Blinks

    A paper jam has occurred and paper remains in the paper input area.

    Remove the jammed paper.

    Tray2, Tray3, Tray4, Tray5

    Blinks

    Paper has jammed around the front cover. Open the front cover and remove the jammed paper.

    Blinks

    Paper has jammed under the image drum.

    Remove the jammed paper.

    ,

    Blinks

    A paper jam has occurred and paper remains near the fuser unit.

    Remove the jammed paper.

    , Fuser unit

    ,

    Blinks

    A paper jam has occurred and paper remains near the duplex unit.

    Remove the jammed paper.

    Duplex unit, Backside of the duplex unit

    Duplex unit, Middle part of the duplex unit

    Toner Sensor Error

    %COLOR%

    Please see HELP for details

    ,

    Blinks

    The toner cartridge of the indicated color is not locked properly.

    Check to make sure the blue lever (toner cartridge lock lever) of the toner cartridge is turned until it lines up with the in the far end.

    If the error occurred in Cyan and the toner cartridge lock lever is turned until it is lined up with the in the far end, check if the 2 blue knobs on the belt unit are properly locked.

    Yellow, Magenta (red), Cyan (blue), Black

    Check Paper

    Paper Multi Feed

    %TRAY%

    Please see HELP for details

    Blinks

    The 1019006 essbase error tray fed multiple sheets of paper at a time.

    Remove the cassette from the tray, and then load paper again.

    After loading, open and close the front cover to release the error.

    Check Paper

    Paper Size Error

    %TRAY%

    Please see HELP for details

    Blinks

    Paper size error has occurred in the indicated tray. Make sure that the size made by paper loaded in the tray matches the setting made by the paper size dial in the paper cassette. Load paper according to the paper size and direction winsock read error for the paper size dial.

    If the setting made by the paper size dial is wrong, cancel printing first, set the paper size dial, and then print again.

    Make sure that the cassette does not feed multiple sheets of paper at a time after starting printing. If it happens, oki 9650 error 133, remove paper, oki 9650 error 133, and then load paper correctly.

    Open and close the front cover to release the error.

    Paper jam occurred

    Paper remained in %NUM% place(s)

    Remove the paper

    Press Help for details

    Blinks

    A paper jam has occurred in the paper feed path from the MP tray.

    Remove the jammed paper.

    ,oki 9650 error 133,

    Blinks

    A paper jam has occurred in the paper feed path from the indicated tray.

    Remove the jammed paper.

    If paper is not jammed, feeding paper may fail.

    Reduce the number of sheets of paper loaded on the paper cassette. Make sure that the paper stoppers are set in the right position.

    Tray 1, Tray 2, Tray 3, Tray 4, oki 9650 error 133, Tray 5

    Blinks

    A paper jam has occurred around the front cover.

    Open the front cover and remove the jammed paper.

    If jammed paper is invisible, close the front cover. If the error persists, paper jams may occur in the duplex unit.

    Blinks

    Paper has jammed under the image drum.

    Remove the jammed paper.

    ,

    Blinks

    A paper jam has occurred around the fuser unit.

    Remove the jammed paper.

    The back of the machine, around the output bin

    The back of the machine, around the duplex unit

    Inside of the machine, around the fuser unit

    ,

    Blinks

    A paper jam has occurred around the duplex unit.

    Pull out the duplex unit and remove the jammed paper.

    For the Error codemake sure that paper does not remain inside the printer after pulling out the duplex unit.

    Blinks

    A paper jam has occurred in the paper feeding path from the duplex unit.

    Open the front cover and remove the jammed paper.

    If paper is invisible, pull out the duplex unit from the back side of the machine and check if paper jams inside of the duplex unit or machine.

    Install Duplex Unit

    Please see HELP for details

    Blinks

    The duplex unit is not properly installed. Install the duplex unit.

    Install New Image Drum

    Image Drum Life

    %COLOR%

    Please see HELP for details

    ,

    Blinks

    The image drum indicated on the screen reaches its lifetime.

    Replace the image drum with a new one.

    Opening and closing the front cover can resume printing for a while. Replace with a new one as soon as possible, however.

    Yellow, Magenta (red), Cyan (blue), Black

    Install New Image Drum

    Image Drum Life

    %COLOR%

    Please see HELP for details

    ,

    Blinks

    The image drum indicated on the screen reaches its lifetime.

    Replace the image drum with a new one.

    Yellow, Magenta (red), Cyan (blue), Black

    Install New Image Drum

    Image Drum Life

    %COLOR%

    To Exceed the Life, Press Online Button

    Please see HELP for details

    ,

    Blinks

    The image drum indicated on the screen reaches its lifetime.

    Replace the image drum with a new one.

    Pressing «ONLINE» oki 9650 error 133 can resume printing for a while. Replace with a new one as soon as possible for maintaining the print quality.

    Yellow, Magenta (red), Cyan (blue), Black

    Install New Image Drum

    Printing disabled due to low threshold of Image Drum life.

    %COLOR%

    Please see HELP for details

    ,

    Blinks

    Printing has stopped because the image drum indicated on the screen reached its lifetime. Replace with a new image drum to print.

    Yellow, Magenta (red), Cyan (blue), Black

    Install New Fuser Unit

    Fuser Unit Life

    Please see HELP for details

    Blinks

    The fuser unit reaches its lifetime.

    Replace the fuser unit with a new one.

    Opening and closing the front cover can resume printing for a while. Replace with a new one as soon as possible for maintaining the print quality.

    Install New Belt Unit

    Belt Unit Life

    Please see HELP for details

    Blinks

    The belt unit reaches its lifetime.

    Replace the belt unit with a new one.

    Opening and closing the cover can resume printing for a while. Replace with a new one as soon as possible for maintaining the print quality.

    Check Fuser Unit

    Please see HELP for details

    Blinks

    The fuser unit is not properly installed. Remove and re-install the fuser unit. If the error persists after re-installing, replace the fuser unit with a new one.

    Install New Belt Unit

    Belt Unit Life

    Please see HELP for details

    Blinks

    Waste toner of the belt unit is full. Replace the belt unit with a new one. Opening and closing the front cover can resume printing. Printing stops after  sheets are printed.

    Check Toner Cartridge

    Improper Lock Lever Position

    %COLOR%

    Please see HELP for details

    , oki 9650 error 133,

    Blinks

    A color toner cartridge indicated on the screen is not installed.

    Make sure to turn the toner cartridge lock lever (blue) on the right side of the cartridge until it lines up with the in the far end. If the lever is in the correct position, check that the white protective tape has been removed.

    Yellow, Magenta (red), Cyan (blue), Black

    Check Image Drum

    %COLOR%

    Please see HELP for details

    ,

    Blinks

    The indicated image drum is not installed correctly.

    Remove and re-install the image drum.

    Yellow, Magenta (red), Cyan (blue), Black

    Check Fuser Unit

    Please see HELP for details

    Blinks

    The fuser unit is not properly installed. Remove and re-install the fuser unit.

    Non Recommended Fuser Unit

    Please see HELP for details

    , oki 9650 error 133,

    Blinks

    Check the model number of the fuser unit mentioned in the User's manual. Use a fuser unit that matches your machine.

    Fuser Unit Not Installed

    Please see HELP for details

    Blinks

    The fuser unit is not properly installed, oki 9650 error 133. Remove and reinstall the fuser unit.

    Check Belt Unit

    Please see HELP for details

    Blinks

    The belt unit is not properly installed. Remove and re-install the belt unit.

    Non Recommended Belt Unit

    Please see HELP for details

    ,

    Blinks

    Check the model number of the belt unit mentioned in the User's manual. Use a belt unit that matches your machine.

    Belt Unit Not Oki 9650 error 133 see HELP for details

    Blinks

    The belt unit is not properly installed. Remove and reinstall the belt unit.

    %COVER% Open.

    Please see HELP for details

    ,

    Blinks

    Indicated cover is open. Close the cover.

    Output tray (Top cover), Front cover

    Wait a Moment

    Rebooting <n>

    -

    Lights up

    Rebooting the printer.

    Wait for a while.

    Power Off and Wait for a while

    Condensing Error

    Fatal

    Blinks

    A condensation has occurred inside a printer.

    Turn the printer off and turn on again after a while.

    Power Off/On

    nnn:Error

    ,

    Blinks

    The LED head cannot be detected.

    Yellow (Y)

    Magenta (M)

    Cyan (C)

    Black (K)

    ,

    Blinks

    An error has occurred in or around the oki 9650 error 133 unit.

    Turn off the printer runtime error 132 turn on again after a while.

    If the error persists after rebooting, contact your dealer and tell them the number in the error message and how the machine works.

    Blinks

    The inside of the printer is hot, oki 9650 error 133. Remove any objects blocking the ventilation holes on the printer, and restart the printer. If the same error is displayed again, contact your dealer.

    Blinks

    The inside of the printer is at a low temperature. Raise the room temperature, then restart the printer. If the same error is displayed again, contact your dealer.

    Blinks

    This is a duplex unit error. Turn the power off, and re-install the duplex unit. If the same error is displayed again, oki 9650 error 133, contact your dealer.

    ,

    Blinks

    Reading the consumables information failed.

    If the following number is displayed, replace the corresponding consumable.

    to Toner cartridge / Image drum

    Fuser unit/ Belt unit

    Turn off the printer and turn on again after a while.

    If the error persists after rebooting, contact your dealer and tell them the number in the error message and how the machine works.

    ,,oki 9650 error 133, oki 9650 error 133,oki 9650 error 133,

    Blinks

    An error has occurred in or around the fuser unit.

    Check that size and thickness of paper in the tray is oki 9650 error 133 off the printer and turn on again after a while.

    If the error persists after rebooting, contact your dealer and tell them the number in the error message and how the machine works.

    Blinks

    The belt unit is at a low temperature. Raise the room temperature, then restart the printer. If the same error is displayed again, contact your dealer.

    nnn*

    Blinks

    An error occurred inside the printer.

    Turn off the machine, and then back on.

    If the same error occurs, contact your dealer.

    "*" is a 3-digit error code. The number that is displayed changes according to the error content.

    Power Off/On

    nnn:Fatal Error

    PC:nnnnnnnn

    LR:nnnnnnnn

    FR:nnnnnnnn

    Fatal, oki 9650 error 133, ~, F0C, F0D, FFE, FFF

    Blinks

    A fatal error occurred on the printer.

    Contact your dealer and tell them the number in the error message and how the machine works.

    The error code is displayed within the range 0x to 0xfff.

OKI C Error Codes list and solutions

OKI C Error Codes list and solutions

&#; Compatible Printer model: OKI C
– OKI C Error Code description:

  • Code:
  • Display: Service Call Error
  • Description: A heavy trouble of the CU substrate (defective substrate or power supply capacity shortage) was detected.
  • Troubleshooting Guides: Is the error display reproducible? Is the error display reproducible?
    Power OFF/ON Replace CU PCB. (Must replace EEPROM)
  • Code: &#;
  • Display: Service Call Power off/on nnn: Fatal Error PC: nnnnnnnn LR: nnnnnnnn FR: nnnnnnnn Erro to Error
  • Description: This stems from a variety of sprers.eu analyzing causes, record three numbers (called program counting value) indicated below LCD column and a printer firmware version.
  • Troubleshooting Guides: Record three digital numbers below LCD column. Restart with OFF/ON? Does an error occur in a particular print data? Is the error display reproducible? Is the error display reproducible? Is the error display reproducible?
    Notify three digital numbers below LCD column and F/W version. Check if it occurs depending on a print data. Request for print data investigation. Change RAM DIMM or ROM DIMM. Replace CU PCB. (Must replace EEPROM) Initialize EEPROM. Re-execute Network setup, such as user setup etc. for use. Change the printer.
  • Code: &#;
  • Display: Service Call Error or Error
  • Description: CU ROM Hash Check Error 1
  • Troubleshooting Guides: Is the Slot A ROM DIMM mounted properly? Is operations restored by replacing the Slot A ROM DIMM?
    Remount Slot A ROM DIMM Replace Slot A ROM DIMM. Replace CU PCB. (Must replace EEPROM)
  • Code:
  • Display: Service Call Error
  • Description: CU Font ROM Hash Error1
  • Troubleshooting Guides: Detected a Font ROM_DIMM hash check error. (Japan Model only)
    Is the Slot B ROM DIMM1 mounted normally? Is the problem corrected by replacing the Slot B ROM DIMM1?
  • Code:
  • Display: Service Call Error
  • Description: CU Resident RAM Check Error
  • Troubleshooting Guides: Is the error display reproducible? Replace Thinstation no valid session type error PCB. (Must replace EEPROM)
  • Code:
  • Display: Service Call Error
  • Description: CU Slot1 DIMM RAM Check Error
  • Troubleshooting Guides: Is the applicable RAM DIMM mounted properly? Is operation restored by replacing the applicable RAM DIMM?
    Re-mount applicable RAM DIMM. Replace RAM DIMM. Replace CU PCB. (Must replace EEPROM)
  • Code:
  • Display: Service Call Error
  • Description: CU Slot2 DIMM RAM Check Error
  • Troubleshooting Guides: Is the applicable RAM DIMM mounted properly? Is operation restored by replacing the applicable RAM DIMM?
    Re-mount applicable RAM DIMM. Replace RAM DIMM. Replace CU PCB. (Must replace EEPROM)
  • Code:
  • Display: Service Call Error
  • Description: Slot1 RAM Spec error Specification of DIMM in CU RAM slot is unsupported.
  • Troubleshooting Guides: Is this a standard RAM DIMM? Is the applicable RAM DIMM difference mounted normal? Is operation restored by replacing the applicable RAM DIMM?
    Use a standard RAM DIMM. Re-mount applicable RAM DIMM. Replace RAM DIMM Replace CU PCB. (Must replace EEPROM)
  • Code:
  • Display: Service Call Error
  • Description: Slot2 RAM Spec error Specification of DIMM in CU RAM slot2 is unsupported.
  • Troubleshooting Guides: Is this a standard RAM DIMM? Is the applicable RAM DIMM difference mounted normal? Is operation restored by replacing the applicable RAM DIMM?
    Use a standard RAM DIMM. Re-mount applicable RAM DIMM. Replace RAM DIMM. Replace CU PCB, oki 9650 error 133. (Must replace EEPROM)
  • Code:
  • Display: Service Call Error
  • Description: CU EEPROM ERROR
  • Troubleshooting Guides: Is the problem corrected by replacing the CU PCB EEPROM?
    REPLACE EEPROM. (User must correct environmental conditions) Replace CU PCB. (Must replace EEPROM)
  • Code:
  • Display: Service Call Error
  • Description: CU FLASH ERROR CU PCB flash ROM error
  • Troubleshooting Guides: Is the error oki 9650 error 133 reproducible? Replace CU PCB. (Must replace EEPROM)
  • Code: &#;
  • Display: Service Call Error to Error
  • Description: CU PCB flash ROM error Flash File System Error
    Failed to access flash memory that is surface-mounted on CU PCB.
  • Troubleshooting Guides: Failed to access flash memory that is surface-mounted on CU PCB. Replace CU PCB (Must replace EEPROM)

OKI C error code

Solve OKI C Error codes

  • Code:
  • Display: Service Call Error
  • Description: PS+PCL Model CU ROM is mounted on a PCL model unit.
  • Troubleshooting Guides: Is a standard model program ROM mounted? Replace Program ROM DIMM. Replace with standard program ROM DIMM officially for the model.
  • Code:
  • Display: Service Call Error
  • Description: CU Type Mismatch CU ROM model mismatches unit.
  • Troubleshooting Guides: Is a standard model program ROM mounted? Replace Program ROM DIMM. Replace with standard program ROM DIMM officially for the model.
  • Code:
  • Display: Service Call Error
  • Description: Operator Panel Error
  • Troubleshooting Guides: Is the error display reproducible? Refer to the flowchart on “Failure to appear on LCD”.
  • Code:
  • Display: Service Call Error
  • Description: CU FAN ERROR CPU cooling fan of CU PCB is abnormal.
  • Troubleshooting Guides: Is the connection of the CU PCB normal? Replace and restore fan?
    Normally connect. Replace fan. Replace CU PCB. (Must replace EEPROM)
  • Code:
  • Display: Power Off/on Error
  • Description: Image Processor Driver Error
  • Troubleshooting Guides: Is the error display reproducible? Power OFF/ON Replace CU PCB. (Replace EEPROM)
  • Code:
  • Display: Power Off/on Error
  • Description: Parallel Interface Driver Error
  • Troubleshooting Guides: Is the error display reproducible? Power OFF/ON Replace CU PCB.(Replace EEPROM)
  • Code:
  • Display: Power Off/on Error
  • Description: USB Drive Error
  • Troubleshooting Guides: Is the error display reproducible? Is the Network PCB properly mounted?
    Power OFF/ON Replace CU PCB.(Replace EEPROM)
  • Code:
  • Display: Power Off/on Error
  • Description: Network comm. Error H/W I/F abnormality between CU-NIC.
  • Troubleshooting Guides: Does replacement of the network PCB correct the problem? Properly mount Replace Network Replace CU PCB. (Must replace EEPROM)
  • Code:
  • Display: Power Off/on Error
  • Description: CANT_HAPPEN PS Firmware Abnormality Detection
  • Troubleshooting Guides: Check if problem is corrected by turning OFF/ON Power. Replace CU PCB. (Must replace EEPROM)
  • Code:
  • Display: Power Off/on Error
  • Description: Engine communication error I/F Error between PUCU.
  • Troubleshooting Guides: Is the CU Assy properly mounted? Does replacement of the CU PCB correct the problem?
    Properly mount Replace CU PCB. (Must replace EEPROM) Replace PU PCB
  • Code: &#;
  • Display: Power Off/on Error seek error occured at offset Error
  • Description: Video overrun detect
  • Troubleshooting Guides: Is the CU Assy properly mounted? Does replacement of the CU PCB correct the problem?
    Properly mount Replace CU PCB. (Must replace EEPROM)
  • Code:
  • Display: Service Call Error
  • Description: Parameter Match Check Error
    Normal Read/Write not possible with EEPROM or Flash.
  • Troubleshooting Guides: Normal Read/Write not possible with EEPROM or Flash. If the condition does not change replace CU PCB.
  • Code:
  • Display: Service Call Error
  • Description: Finisher Unrestorable Error
  • Troubleshooting Guides: Is the error display reproducible? If turning OFF and ON the power again does oki 9650 error 133 correct the problem, oki 9650 error 133, maintenance by a servicing personnel is necessary.
  • Code:
  • Display: Service Call Error
  • Description: Inverter power supply Error
  • Troubleshooting Guides: Is the error display reproducible? If turning OFF and ON the power again does not correct the problem, maintenance by a servicing personnel is necessary.
  • Code:
  • Display: Service Call Error
  • Description: When turning ON the power, detected error in engine EEPROM test total.
  • Troubleshooting Guides: Does the Error take place again? Replace engine control PCB (S2V).
  • Code:
  • Display: Service Call Error
  • Description: When turning ON the power, failed to detect the EEPROM (presence).
  • Troubleshooting Guides: Is there an EEPROM? Does the Error take place again?
    Check to see if there is an EEPROM. If not, mount an EEPROM. Mount oki 9650 error 133 EEPROM. Replace engine control PCB (S2V).
  • Code:
  • Display: Service Call Error
  • Description: Error detected in engine control logic.
  • Troubleshooting Guides: Does the Error take place again? Yes Replace engine control PCB (S2V).
  • Code: &#;
  • Display: Service Call Error to Error
  • Description: An optional unit for another model was detected.
    Duplex unit 2nd Tray 3rd Tray 4thTray 5th Tray Finisher Inverter
  • Troubleshooting Guides: Is the proper optional unit for that model mounted?
    Mount the proper optional unit. Check the connection. Then turn ON the power again, oki 9650 error 133. Replace the unit if operations is not restored.
  • Code:
  • Display: Service Call Error
  • Description: Low Voltage Power FAN Error
  • Troubleshooting Guides: 1) Is the PU PCB high voltage power cable properly connected? 2) Does the Error take place again?
    Connect properly Check to see if there is any contact-defects in the high voltage system. Replace High Voltage Power Unit
  • Code:
  • Display: Service Call Error
  • Description: Sensor detects an inappropriate relative humidity for the operating environment.
  • Troubleshooting Guides: 1) Is an Error message displayed? 2) Does the Error take place again?
    Turn ON power again. Replace the environmental sensor.
  • Code:
  • Display: Service Call Error
  • Description: Sensor detects an inappropriate room temperature for the operating environment.
  • Troubleshooting Guides: 1) Is an Error message displayed? 2) Does the Error take place again?
    Turn ON power again. Replace the environmental sensor.
  • Code:
  • Display: Service Call Error
  • Description: Error detected in MPT home position.
  • Troubleshooting Guides: 1) Is an Error message displayed? 2) Does the Error take place again?
    Turn ON power again. Replace MPT
  • Code:
  • Display: Turn OFF the power and wait for awhile. Dew Error
  • Description: Sensor Dew Error
  • Troubleshooting Guides: Sensor Dew Error Detected Wait a while then turn ON power again.
  • Code:
  • Display: Service Call Error
  • Description: Engine FAN Motor Error
    Error was detected in each fan.
    Fuser FAN Error Power FAN Error PU Motor FAN Error Belt FAN Error IDFAN Error Top Cover FAN Error
  • Troubleshooting Guides: Is the applicable location of the fan connection normal? If the condition does not change Replace fan.
  • Code: &#;
  • Display: Service Call Y Head M Head C Head K Head
  • Description: After turning ON the power or when cover is closed, the sensor detects that the unit is missing.
  • Troubleshooting Guides: 1) Is an Error message displayed? 2) Is the LED head properly mounted? 3) Does the Error take place again?
    ICheck oki 9650 error 133 OED head unit. Turn ON power again. Replace the LED head Assy.
  • Code: &#;
  • Display: Service Call Y M Error
  • Description: Color ID up/down error is detected.
  • Troubleshooting Guides: 1) Is an Error message displayed? 2) Does the Error take place again?
    Turn ON power again. Confirm that the Y, M, and C ID units are in position, and reboot.
  • Code: &#;
  • Display: Service Call Y ID M ID C ID K ID
  • Description: This is indicated when the toner feed switch error or the toner locklever- open error occurs repeatedly when new toner is used.
  • Troubleshooting Guides: 1) Is the toner lock-lever-open error indicated? 2) Does the problem persist even if the ID units are replaced?
    Confirm that the lever is in position. Replace the toner feed unit. Replace the ID units.
  • Code: &#;
  • Display: Service Call Y M C K
  • Description: When ID unit fuse cannot be cut.
    Check if the ID Unit is normally mounted.
  • Troubleshooting Guides: Check if the ID Unit is normally mounted. Yes Check cable connection, then replace engine PCB.
  • Code:
  • Display: Service Call Error
  • Description: When belt unit fuse cannot be cut.
  • Troubleshooting Guides: Is the belt unit mounted normally? Yes Check cable connection, then replace engine PCB.
  • Code:
  • Display: Service Call Error
  • Description: When fuser unit fuse cannot be cut.
  • Troubleshooting Guides: Is the fuser unit mounted normally? Yes Check cable connection, then replace engine PCB.
  • Code: &#;
  • Display: Service Call Y Toner M Toner C Toner K Toner
  • Description: Toner sensor detected error.
  • Troubleshooting Guides: 1) Is an Error message displayed? 2) Does the Error take place again?
    Replace toner sensor or Assy (SGG-PWB). Replace toner sensor or Assy (SGG-PWB).
  • Code:
  • Display: Service Call Error
  • Description: Thermistor Slope Error
  • Troubleshooting Guides: 1) Is islom terror emas Error message displayed? 2) Does the Error take place again?
    Turn ON power again. Leave in that state for 30 minutes then turn ON power again.
  • Code:
  • Display: Service Call Error
  • Description: Compensation Thermistor Error
  • Troubleshooting Guides: 1) Is an Error message displayed? 2) Does the Error take place again?
    Turn ON power again. Leave in that state for 30 minutes then turn ON power again.
  • Code:
  • Display: Service Call Error
  • Description: Upper Side Thermistor Error
  • Troubleshooting Guides: 1) Is an Error message displayed? 2) Does the Error take place again?
    Turn ON power again. Leave in that state for 30 minutes then turn ON power again.
  • Code: &#;
  • Display: Service Call Error Error Error Error
  • Description: Fuser Thermistor short-circuit or Open is detected (High Temperature (HOT) or Low Temperature (COLD))
  • Troubleshooting Guides: 1) Is an Error message displayed? 2) Does the Error take place again?
    Turn ON power again. Leave in that state for 30 minutes then turn ON power again.
  • Code: &#;
  • Display: Service Call Error Error
  • Description: Thermistor indicates High Temperature (HOT) Error.
  • Troubleshooting Guides: 1) Is an Error message displayed? 2) Does the Error take place again?
    Turn ON power again. Leave in that state for 30 minutes then turn ON power again.
  • Code: &#;
  • Display: Service Call Error Error
  • Description: Thermistor indicates Low Temperature (COLD) Error.
  • Troubleshooting Guides: 1) Is an Error message displayed? 2) Does the Error take place again?
    Turn ON power again. Leave in that state for 30 minutes then turn ON power again.
  • Code:
  • Display: Service Call Error
  • Description: Wrong Fuser Standard
  • Troubleshooting Guides: 1) Is the model and power voltage of the fuser mounted proper? 2) Fuser is properly mounted, oki 9650 error 133, but Error results again.
    Assemble the proper fuser. Check to see that the fuser is properly assemble. Replace fuser.
  • Code: &#;
  • Display: Service Call Error to Error
  • Description: The engine detects communication is not possible with the optional unit.
    Envelope Feeder (Unused) Duplex unit Tray2 unit Tray3 unit Tray4 unit Tray5 unit Finisher unit
  • Troubleshooting Guides: 1) Is an Error message displayed? 2) Does the Error take place again?
    Turn ON power again. Replace optional unit.
  • Code:
  • Display: Service Call Error
  • Description: Communication with control panel failed.
  • Troubleshooting Guides: Is the control panel and cable connected properly?
    Connect properly Replace the control panel and cable.
  • Code:
  • Display: Service Call Error
  • Description: Sub-CPU I/F Error
  • Troubleshooting Guides: Sub-CPU Communication Error. Check the connection of the S2M board. Replace the S2M board.
  • Code:
  • Display: Service Call Error
  • Description: Inverter Unit I/F Error
  • Troubleshooting Guides: 1) Inverter bios beep error messages error 2) Does the Error take place again?
    Check the connection of the I/F cable. Replace the V board.
  • Code:
  • Display: Service Call Error
  • Description: System Memory Overflow
  • Troubleshooting Guides: System Memory Overflow Power OFF/ON Replace CU PCB. (Replace EEPROM)
  • Code: &#;
  • Display: Service Call Error to Error
  • Description: PU Firm Download Error Error occurred when downloading PU firmware.
  • Troubleshooting Guides: Error occurred when downloading PU firmware. After turning ON the power again, try downloading again. (This process isn’t executed for regular operations, therefore, will not occur)
  • Code:,
  • Display: Service Call Error Error Error to Error Power Off/on nnn: p 0xFOC: Error 0xFOD: Error 0xFFE: Error 0xFFF: Error
  • Description: CU Program Dysfunction
    Detected illegal process with CU program.
  • Troubleshooting Guides: Detected illegal process with CU program. Yes Write down the 24 digit number displayed on the LCD panel and report it. Turn OFF the power, oki 9650 error 133. Then check the insertion of the CU board. Now turn ON the power again.
  • Code:
  • Display: Power On/off DOWNLOAD ERROR
  • Description: Custom Media Table Download Error
    Failed to download custom media table.
  • Troubleshooting Guides: Failed to download custom media table. After turning ON the power again, try downloading again. (This process isn’t executed for regular operations, therefore, will not occur)
  • Code:
  • Display: Service Call Error
  • Description: Print Satistic mismatch
    HDD was removed or replaced after print statistic is set to ON.
  • Troubleshooting Guides: HDD was removed or replaced after print statistic is set to ON. Get the original HDD back.
  • Code:
  • Display: Service Call Error
  • Description: RFID Reader not Installed
  • Troubleshooting Guides: 1) RFID read device error 2) Does the Error take place again?
    Check the connection of the RFID R/W board. Replace the RFID R/W board. Replace the S2V board.
  • Code:
  • Display: Service Call Error
  • Description: RFID Reader I/F Error
    An interface error was detected with the RFID reader device.
    communication error between the RFID reader and the engine PCB. the transceiver circuit error of the RFID reader. communication error between the RFID reader and the Tag chip. the RFID Tag detection error (more than 4 chips).
  • Troubleshooting Guides: Same action as for error Replace the RFID Oki 9650 error 133 board. Check the connection of the antenna cable. Check to confirm that the number of RFID tags is correct.
  • Code: &#;
  • Display: Service Call Error to Error Error Error
  • Description: Engine Program Memory Error
    Flash-memory hardware error Duplex flash-memory error Optional tray-2 flash-memory error Optional tray-3 flash-memory error Optional tray-4 flash-memory error Optional tray-5 flash-memory error Sub-CPU flash-memory error Inverter flash-memory error
  • Troubleshooting Guides: If the error still occurs after rebooting, replace the circuit board of the relevant unit.
  • Code: &#;
  • Display: Power Off/on Error to Error
  • Description: GDDC Error
    Tray1 GDDC Error Tray2 GDDC Error Tray3 GDDC Error Tray4 GDDC Error Tray3 GDDC Error
  • Troubleshooting Guides: Check to confirm that the tray is mounted correctly. Replace the geared motor of the tray.
  • Code:
  • Display: Power Off/on Error
  • Description: Belt Slit Sensor Error The belt is not running properly.
  • Troubleshooting Guides: The belt is not running properly. Does the error message still appear after rebooting? Yes Check to confirm that the belt is mounted correctly. Replace the belt.
  • Code:
  • Display: Power Off/on Error
  • Description: Duplex FAN0 Alarm Detection Error of the fan in the duplex unit
  • Troubleshooting Guides: Error of the fan in the duplex unit Does the error still occur after rebooting?
    Check to confirm that the duplex unit is mounted correctly. Check the connection of the fan. Regqueryvalueex 234 error the fan.
  • Code:
  • Display: Power Off/on Error
  • Description: Duplex 24V Abnormal Current Detection
    24 V of power is not supplied to the duplex unit properly.
  • Troubleshooting Guides: 24 V of power is not supplied to the duplex unit properly. Does the error still occur after rebooting?
    Check to confirm that the duplex unit is mounted correctly. Check the connection of the fan. Replace the fan.
  • Code:
  • Display: Power Off/on Error
  • Description: Yellow Image Drum Lock Error. The Y ID unit is not operating properly.
  • Troubleshooting Guides: The Y ID unit is not operating properly. Does the error message still appear after rebooting?
    Check to confirm that the Y ID unit is in position. Replace the Y ID unit. Replace the Y ID motor.
  • Code:
  • Display: Power Off/on Error
  • Description: Magenta Image Drum Lock Error, oki 9650 error 133. The M ID unit is not operating properly.
  • Troubleshooting Guides: The M ID unit 2908 error quickbooks not operating properly. Does the error message still appear after rebooting?
    Check to confirm that the M ID unit is in position. Replace the M ID unit. Replace the M ID motor.
  • Code:
  • Display: Power Off/on Error
  • Description: Cyan Image Drum Lock Error. The C ID unit is not operating properly.
  • Troubleshooting Guides: The C ID unit is not operating properly. Reporter ide error the error message still appear after rebooting?
    Check to confirm that the C ID unit is in position. Replace the C ID unit, oki 9650 error 133. Replace the C ID motor.
  • Code:
  • Display: Power Off/on Error
  • Description: Black Image Drum Lock Error. The K ID unit is not operating properly.
  • Troubleshooting Guides: The K ID unit is not operating properly. Does the error message still appear after rebooting?
    Check to confirm that the K ID unit is in position. Oki 9650 error 133 the K ID unit. Replace the K ID motor.
  • Code:
  • Display: Power Off/on Error
  • Description: Tray2 24V Abnormal Voltage Detection
    24 V of power oki 9650 error 133 not supplied to tray 2 properly.
  • Troubleshooting Guides: 24 V of power is not supplied to tray 2 properly. Check to confirm that tray 2 is mounted correctly.
  • Code:
  • Display: Power Off/on Error
  • Description: Tray3 24V Abnormal Voltage Detection
    24 V of power is not supplied to tray 3 properly.
  • Troubleshooting Guides: 24 V of power is not supplied to tray 3 properly. Check to confirm that tray 3 is mounted correctly.
  • Code:
  • Display: Power Off/on Error
  • Description: Tray4 24V Abnormal Voltage Detection
    24 V power is not supplied to tray 4 properly.
  • Troubleshooting Guides: 24 V power is not supplied to tray 4 properly. Check to confirm that tray 4 is mounted correctly.
  • Code:
  • Display: Power Off/on Error
  • Description: Tray5 24V Abnormal Voltage Detection
    24 V of power is error 1723 java minecraft supplied to tray 5 properly.
  • Troubleshooting Guides: 24 V of power is not supplied to tray 5 properly. Check to confirm that tray 5 is mounted correctly.
  • Code:
  • Display: Power Off/on Error
  • Description: Fuser Motor Lock 3g iphone error 1013 The fuser is not operating properly.
  • Troubleshooting Guides: The fuser is not operating properly. Does the error still occur?
    Check to confirm that the fuser is in position. Replace the fuser. Replace the fuser motor.
  • Code:
  • Display: Power Off/on Error
  • Description: Waste Toner Transfer Motor Lock Error
    The waste toner transfer motor is not operating properly.
  • Troubleshooting Guides: The waste toner transfer motor is not operating properly. Does the error still occur? Yes Check to confirm that the waste toner transfer system is operating properly, oki 9650 error 133. Replace the waste toner motor.
  • Code:
  • Display: Power Off/on Error
  • Description: Sub-CPU Clock Frequency Error
    The Sub-CPU clock frequency is not correct.
  • Troubleshooting Guides: The Sub-CPU clock frequency is not correct. Does the error still occur? Yes Check the connection of the S2P board. Replace the S2P board.
  • Code:
  • Display: Power Off/on Error
  • Description: Duplex CPU Clock Frequency Error
  • Troubleshooting Guides: The duplex CPU clock frequency is not sprers.eu the error still occur? Yes Check the connection of the V board. Replace the V board.
  • Code:
  • Display: Power Off/on Error
  • Description: Inverter CPU Clock Frequency Error
  • Troubleshooting Guides: The inverter CPU clock frequency is not correct. Does the error still occur? Yes Check the connection of the V board. Replace the V board.
  • Code:
  • Display: Power Off/on Error
  • Description: Trya2 CPU Clock Frequency Error
  • Troubleshooting Guides: The tray-2 CPU clock frequency is 1password runtime error chrome correct. Does the error still occur? Yes Check the connection of the V board of tray 2. Replace the V board.
  • Code:
  • Display: Power Off/on Error
  • Description: Trya3 CPU Clock Frequency Error
  • Troubleshooting Guides: The tray-3 CPU clock frequency is not correct. Does the error still occur? Yes Check the connection of the V board of tray 3. Replace the V board.
  • Code:
  • Display: Power Off/on Error
  • Description: Trya4 CPU Clock Frequency Error
  • Troubleshooting Guides: The tray-4 CPU clock frequency is not correct. Does the error still occur? Yes Check the connection of the V board of tray 4. Replace the V board.
  • Code:
  • Display: Power Off/on Error
  • Description: Trya5 CPU Clock Frequency Error
  • Troubleshooting Guides: The tray-5 CPU clock frequency is not correct. Does the error still occur? Yes Check the connection of the V board of tray 5. Replace the V board.
  • Code:
  • Display: Power Off/on Error
  • Description: Waste Toner Transfer Error
    The transfer mechanism of an unexpected i/0 error has accerred toner duct for ID is not operating properly.
  • Troubleshooting Guides: The transfer mechanism of the toner duct for ID is not operating properly. Does the error still occur?
    Check to confirm that the basket assembly is in position (if it is engaged with the gear of the printer). Check to confirm that the holder magnet D contains a magnet, and check the magnetic polarity, oki 9650 error 133. Replace the HAL IC circuit board. Replace the duct assembly toner.
  • Code: F0C, F0D, FFE, FFF
  • Display: Service Call Error Error Error to Error Power Off/on nnn: p 0xFOC: Error 0xFOD: Error 0xFFE: Error 0xFFF: Error
  • Description: CU Program Dysfunction
    Detected illegal process with CU program.
  • Troubleshooting Guides: Detected illegal process with CU program. Yes Write down the 24 digit number displayed on the LCD panel and report it. Turn OFF the power. Then check the insertion of the CU board. Now turn ON the power again.


&#; Get more information about Epson XP troubleshooting, click here

&#; Get more error code list with quick guide to fix printer product, click here
&#; About get help with reseting Epson inkpad or others, click here

Waste Ink Pad Counter Utility Functions:

– Cleaning printhead.
– Ink charge.
– Fix Epson red lights blinking Error

Epson red lights blinking 2

– Fix Epson Service Required Error: A printer’s ink pad at the end of its service life Please contact Epson Support.
Epson red lights blinking 2

– Check the current value of waste ink counters and ink level counters.
– Clear Waste Ink Counters.
– Read and write serial number.
– Read and write USB ID.
– Read and write HEAD ID.
– Make EEPROM dump, backup.
– Paper feed test.
– Nozzle check.
– Color oki 9650 error 133 pattern.
– Initialize (disable) PF deterioration offset.
– Retrieve device information

Contact us to get support with OKI C Error case

Telegram: sprers.eu
Facebook: sprers.eu
Or click here to get more ways.

Filed Under: error code, OKITagged With: sharepoint 7043 error OKI C, OKI C Error, OKI C repair service, OKI C troubleshooting

Oki  Data  CONFIDENTIAL

TH  Rev. 3 

  CU  PCB  of    dpi  Printer  and  Replacement  of  Mounted  Components

Nonvolatile  memory  and  a  combination  (at  ield)

*  Factory Default Procedure

Operator  panel  operation:  Hold  down  [MENU  +]  or  [MENU  -]  key  and  choose  "Administrator 

menu." 

 "Do you want to continue setting?" appears.  Choose "Yes." 

 "Ofline  Starting 

setting    Please  wait"  appears. 

  Press  [MENU  -]  key  and  choose  "Factory  default." 

Choose "Yes."   Reboot.

Component

Adjustment

Recovery

Unrecoverable item

AS3 PCB

Mount the EEOROM, Keychip, HDD 

used for the old AS3 PCB(EEPROM 

and Keychip are not mounted on a 

maintenance AS3 PCB)

As the MAC address is 

changed, the password to login 

in the web page has to be 

changed

None

HDD

After a new HDD is mounted on 

the AS3 PCB, perform the Factory 

Default (the EEOROM setting data 

are copied to the HDD).

•  The user settings stored in 

the HDD will be lost.  Set 

necessary parameters 

again.

•  If static IP is selected for the 

network setting, it shall be 

set again.

•  The clock shall be set again.

•  User-installed fonts will be 

lost.  These can be restored 

using the backup utility.

If the fonts are not backed up, 

they cannot be restored.

EEPROM

•  Choose a maintenance EEPROM 

for the model.

•  After a maintenance EEPROM is 

mounted on the AS3 PCB, perform 

the Factory Default (the EEPROM 

data are copied to the HDD).

•  The user settings stored in 

the HDD will be lost.  Set 

necessary parameters 

again.

•  If static IP is selected for the 

network setting, it shall be 

set again.

•  The clock shall be set again.

• The page count in the 

EEPROM of the CU will be 

lost and Color/Monochrome 

Page will be returned to zero.  

When the number oki 9650 error 133 printed 

sheets and other information 

are necessary, print out the 

engine maintenance menu.

• The user-installed fonts will 

be lost.

KeyChip

After a new Key Chip is mounted on 

the AS3 PCB, perform the Factory 

Default.

The user settings stored in 

the HDD will be lost.  Set 

necessary parameters again.

Oki C Service

Citation preview

C/C/MPSc# 

Maintenance Manual C

Oki Data CONFIDENTIAL

Copyright I nform at ion Copyright © by Oki Dat a. All Right s Reserved

Disclaim er Every effort has been m ade t o ensure t hat t he inform at ion in t his docum ent is com plet e, accurat e, and up- t o- dat e. The m anufact urer assum es no responsibilit y for t he result s of errors beyond it s cont rol. The m anufact urer also cannot guarant ee t hat changes in soft ware and equipm ent m ade by ot her m anufact urers and referred t o in t his guide will not affect t he applicabilit y of t he inform at ion in it. Ment ion of soft ware product s m anufact ured by ot her com panies does not necessarily const it ut e endorsem ent by t he m anufact urer. While all reasonable effort s have been m ade t o m ake t his docum ent as accurat e and helpful as possible, we m ake no warrant y of any kind, expressed or im plied, as t o t he accuracy or com filesyscheck.cfg error modern warfare 3 eness of t he inform at ion cont ained herein. The m ost up- t o- dat e drivers and m anuals are available from t he web sit e: ht t p: / / sprers.eunt ingsolut sprers.eu

Oki Dat a CONFI DENTI AL

Oki Data CONFIDENTIAL

Preface This manual describes the procedures of the maintenance of the C/C printer. The document is produced for maintenance personnel use.

Note! • The descriptions in this manual are subject to change without prior notice. • In preparing the document, efforts have been made to ensure that the information in it is accurate. • The parts used for the printers are sensitive and, if handled improperly, may be damaged. It is strongly recommended that the products are maintained by maintenance men registered with Oki Data. • Errors may be crept into the document. Oki Data assumes no responsibility for any damage resulting from, or claimed to be the results of, those repairs, adjustments or modiications to the printers which are made by users using the manual. • Be sure to eliminate static electricity before starting work.

TH Rev. 3

3/

Oki Data CONFIDENTIAL

In order to use the product with safety In order to use the product with safety, make sure to read the user's manual (this manual) before using the product.

General Caution

Do not touch the safety switch of the internal parts of the printer. Electric shock may occur due to the occurrence of high pressure. The rotation of the gear may also cause injury. Do not use an extremely lammable spray around the printer. Fire may occur because of parts with high temperature. Please let our staff in Customer Center know after unplugging main connector when the cover gets extremely hot, is smoking, emits questionable odor, or is making strange noise. Fire may occur. Please let our staffs in Customer Center know after unplugging main connector when liquid such as water goes into the printer. Fire may occur. Please take a foreign object away after unplugging when you drop foreign objects such as clips into the printer. That situation may case electric shock, ire, and/or injury. Do not conduct an operation or an analysis other than speciied in user's manual. That situation may case electric shock, ire, and/or injury. Please let our staffs in Customer Center know after unplugging mains connector when the printer has fallen down or damaged. That situation may case electric shock, ire, and injury. Do not connect the power cord, the printer cable, or the ground wire other than instructed in user's manual. Fire can be induced if misused. Do not insert objects at the vent hole. Do not operate the oki 9650 error 133 with the rear cover opened. Oki 9650 error 133 shock, ire, and/or injuries may occur. Do not place a oki 9650 error 133 with liquid on the printer. Electric shock, ire, and/or injuries may occur.

TH Rev. 3

4/

Oki Data CONFIDENTIAL

Risk of explosion if battery is replaced by an incorrect type. Battery of the printer need not to be replaced. Do not touch the battery. Replace the whole board to replace the CU main board. In the brother mfc 8860dn sending error of replacing batteries at board repairs, replace with the speciied type ones. Installation of another type batteries may result in explosion, oki 9650 error 133. Caution for used batteries are as follows; do not recharge, force open, heat or oki 9650 error 133 of in ire. When open the printer cover, do not touch the fuser unit. You may get burned.

Do not throw toner cartridges, or image drum cartridges into ire, oki 9650 error 133. You may get burned by dust explosion. We do not guarantee operations when UPS (Uninterruptible Power Supply) is used. Do not use UPS. It may cause ire.

Do not go near an ejection area while the power is on and in printing. You may get injured.

TH Rev. 3

5/

Oki Data CONFIDENTIAL

Contents 1.

Configuration

2.

System Coniguration Printer Composition Optional Composition 11 Speciications Interface Speciications USB Interface Speciications Network Interface Speciications Parallel Interface Speciications

Descriptions of Operations

Main Control PCB Engine Control PCB (S2V PWB) Power Unit Mechanical process Electrophotographic Processing Mechanism Paper Processing Mechanism Sensor Paper-Related Sensor Other Sensors Color Drift Correction Image Transfer Control According to Environmental Change (Room Temperature and Relative Humidity) Paper Jam Detector Cover Open Toner Low Detection Paper Size Detection Power ON Process Self-Diagnostic Test Color Drift Detection Reading Version of Routine Replacement Units Life Counter of Replaceable Units Toner Usage Level Detection

3.

Printer Installation

Precautions and Prohibition Printer Unpacking Procedure Printer Installation Instructions Packed Units and Attachments Assembly Procedure Printer Main Body Power Cable Connection Installation of Optional Components Checking of Optional-Component Recognition MenuMap Printing How to Connect Checking of User Paper

TH Rev. 3

6/

Oki Data CONFIDENTIAL

4.

Parts Replacement Precautions When Replacing Parts Parts Layout Parts Replacement Method Cover-Rear, Cover-Side (R), and Cover-Side (R) Rear Cover-Side (L) and Cover Assy-Front Stacker Assy-FU Cover Assy-OP Panel, Cover-Guard (R), Cover-Guard (Front) and Cover-Guard (L) OP PCB Cover Assy-Top FAN-PCB-Assy, CU-Board-Assy and S2V-PU-Board Job-Offset-Assy and Basket-Assy Plate Top Assy Eject-Assy Motor-Pulse-Belt and Sensor-Resist-Assy FDR Unit-MPT FDR Unit-Resist Duct Assy HV-Assy Power Unit Low Voltage Power Source Assy and Motor-FAN Belt-Assy Fuser Unit-LBT Unit-Duplex Paper Feed Roller MPT Feed Roller

5.

Adjustment System Maintenance Menu ID Check Pattern Print (“TEST PRINT MENU” Item)

Maintenance Menu and Its Function Maintenance Menu Engine Maintenance Mode Various Printing Methods with a Stand-Alone Printer Coming with a Controller Adjustment After Replacing Parts Precautions when Replacing the Engine Control PCB Precautions Upon EEPROM Replacement CU PCB of dpi Printer and Replacement of Mounted Components Precautions in Key Chip Replacement ( dpi printer) Precautions in EEPROM Replacement ( dpi printer) Precautions in HDD Replacement ( dpi printer) Product Code of Maintenance HDD ( dpi printer) Setup of EEPROM after replacement of TBX PCB Setup of destination Density Correction Paper Thickness Detection/Sensitivity Correction

TH Rev. 3

7/

Oki Data CONFIDENTIAL

6.

Routine Replacement

7.

Routine Replacement of Consumable Parts Cleaning LED Lens Array Cleaning Pickup Roller Cleaning Cleaning Feed Roller

Malfunction Repair Procedure

Precautions Before Repairs Items to Check Before Remedying Abnormal Image Precautions Before Remedying Abnormal Image Troubleshooting Preparations Troubleshooting LCD Message List Preparing for Troubleshooting Troubleshooting With Abnormal Image Check Fuse PU Error

8.

Connection Diagram Check Resistance Value Diagram of Part Layout of Various PCB

9.

Error message list Message Chart of CX/C Illustration appears on the operating panel F/W Revision(C) F/W Rev. table Check abd version display

TH Rev. 3

8/

TH Rev. 3

for MFP configuration

Scanner

DSP × 6

MFP oki 9650 error 133 (BY3)

DC FAN

DC FAN

HDD

Belt Unit

Fuser Unit

Low Voltage Power Unit

Y-ID Unit

K-ID Unit

Double-Side Printer Unit

2nd/3rd Tray Large-Volume Paper Tray

C-ID Unit

Figure

M-ID Unit

High Voltage Power Unit

M

K ID

M

Hopping

Geared Motor

M

Heavy Paper Sensor Density Sensor Color Drift Sensor

M

Toner Supply x2

Disposal Toner

Lift up

Paper Conveyor Sensor Paper Size Detector Fuser Temperature Detector Ambient Temperature/Humidity Detector Remaining Toner Level Detector ID, Belt, Fuser Check RFID, slack detection, & phase detection

M

M ID

M

MT/ Resist

System Coniguration

DDRS DRAM DIMM × 2

Engine Controller

M

Fuser

M

Y ID



Control Area

Job Offset

M

C ID

CONFIGURATION

dpi PCB (AS3)

or

HDD

Connection PCB

M

Belt

DC motor

Pulse motor

1.

USB Ethernet

Centro

USB Ethernet

DDRS DRAM DIMM × 2

dpi PCB (TBX)

Operation Panel

LED Head

Oki Data CONFIDENTIAL

Figure illustrates the System Coniguration of this printer.

9/

Oki Data CONFIDENTIAL



Printer Composition

The internal part of the printer consists of the following parts. • Digital Photo Processor • Paper Travel Path • Control Unit (CU and PU) • Operation Panel • Power Source (High Voltage Area/Low Voltage Area) Figure illustrates the printer composition.

Figure TH Rev. 3

10 /

Oki Data CONFIDENTIAL



Optional Composition

This oki 9650 error 133 comes with the following options.

(1)

2ndTray/3rdTray

(2)

Double-Side Printer Unit

(3)

Large-Volume Paper Sig error 39 02 (4)

Additional Memory:oki 9650 error 133, MB

(5)

Internal Harddisk

TH Rev, oki 9650 error 133. 3

11 /

Oki Data CONFIDENTIAL

(7)

Finisher Unit ・ 5 Tray

・ 4 Tray

(8)

Scanner Unit

TH Rev. 3

12 /

Oki Data CONFIDENTIAL



Speciications W

D):

mm

mm

mm

(1)

Dimensions (H

(2)

Weight:

kg

(3)

Paper Paper Type:

Regular paper and transparency

(4)

Paper Size:

Post Card, Legal 13”or 14”, Executive, A4, A5, B5, oki 9650 error 133, A6,A3, A3 Nobi, B4, Letter, Tabloid (However, Post Card:1stTray and Multi-purpose-Tray only)

Continuous Paper Feed:

1st Tray : 64 to g/m2 Multi-purpose-Tray : 64 to g/m2

Print Speed Color:

36 ppm (OHP: 10 ppm)

Monochrome:

40 ppm (OHP: 15 ppm)

Post Card, Label, Heavy Paper: 15 ppm (5)

Resolution:



/16 bit gray scale /32 bit gray scale

(6)

Input Power:

~VAC ±10%

(7)

Power Consumption

Peak Normal Idle Power Save Mode

(8)

Frequency:

50/60Hz ± 1Hz

(9)

Noise

~VAC ±10% : W : W average (Reference value) : W (Reference value) : 34W

During Operations:

54 dB (without optional unit)

Standby Time:

42 dB

Power Save:

28 dB

(10) Life of Consumables Toner Cartridge: 5, page (A4 5% Duty) (Y, M, C, K each) Large-Volume Toner Cartridge: 15, page (A4 5% Duty) (Y, M, oki 9650 error 133, C, K each) Imaging Drum: 26, page (A4 5% Duty, Continuous Printing) (for 3P/J) (Y, M, Oki 9650 error 133, K each) (11) Routine Replacement of Consumable Parts Fuser Unit Assy: Transfer Belt Unit Assy: Feed Roller Set: MPT Feed Roller Set: Waste Toner Box:

TH Rev. 3

Everyoki 9650 error 133, pagespage equivalent (for 3P/J) Aroundoki 9650 error 133, pages Aroundpages 30, pages or equivalent (3P/J)

13 /

Oki Data CONFIDENTIAL

(12) Temperature and Relative Humidity Temperature Temperature Conditions Temperature (°F)

Temperature (°C)

Remarks

Operating

50 to

10 to 32

17 to 27°C (Temperature guaranteeing full-color print quality)

Not Oki 9650 error 133 32 to

0 to 43

Power OFF

Storage (1 Year Max)

to

to 43

Drum and Toner: Yes

Transport (1 month Max)

to

to 50

Drum: Yes/Toner: No

Transport (1 month Max)

to

to 50

Drum and Toner: Yes

Relative Humidity Relative Humidity Conditions Relative Humidity Maximum Web Bulb Temperature (%) (°C) Operating

20 to 80

25

Not Operating

10 to 90



Storage

10 to 90

35

Transport

10 to 90

40

Remarks % (Temperature guaranteeing full-color print quality) Power OFF

(13) Printer Life: every 1, page (for A4 paper) or 5 years

TH Rev. 3

14 /

Oki Data CONFIDENTIAL



Interface Speciications



USB Interface Speciications

USB Interface Overview (1)

Basic Speciications

(2)

USB Compliant Transfer Mode

(3)

Full Speed (max. 12Mbps+%) High Speed (max. Mbps+%) Power Control Self-Power Device

USB Interface Connector and Cable (1)

Connector Printer-Side

B Receptacle (Female) UP Stream Port UBB-4R-D14T-1 (JST Mfg. Co., Ltd.) equivalent product

Connector Pin Layout

Cable:

(2)

2

1

3

4

B Plug (Male)

Cable Cable Length:

Oki C, C, Maintenance Manual

Oki C, C, Maintenance Manual preview img 1

Oki Data CONFIDENTIAL C/C Maintenance Manual A

Oki C, C, Maintenance Manual preview img 2

Copyright © by Oki Data. All Rights Reserved Oki Data America's, oki 9650 error 133, Inc. ("Oki Data"), authorizes you to view, copy, and print documents published by Oki Data for noncommercial use within your organization only. In consideration of this authorization, you agree and acknowledge that any copy of these documents shall retain all copyright and proprietary rights contained herein. Each document published by Oki Data may contain additional copyright information and proprietary notification relating to that individual document. Nothing contained herein shall be construed as conferring by estoppel, implication or otherwise any license or right under any patent or trademark of Oki Data, Oki Electric Industry Co., Ltd. ("Oki Electric"), or any third party. Except as provided above nothing contained herein shall be construed as conferring any license or right under any Oki Data copyright. Oki Data has taken care to insure that the information which follows is complete, accurate and up-to-date, oki 9650 error 133. However, Oki Data assumes no responsibility for errors or omissions which may occur. All the information provided oki 9650 error 133 subject to change from time to time at the sole discretion of Oki Data. All publications may include technical inaccuracies or typographical errors. We reserve the right to make periodic changes, oki 9650 error 133, additions, and deletions to publications without notice. The most up-to-date drivers and manuals are available from the web site: sprers.eu Oki Data CONFIDENTIAL

Oki C, C, Maintenance Manual preview img 3

Oki Data CONFIDENTIAL Preface This manual describes the procedures of the maintenance of the C/C printer. The document is produced for maintenance personnel use. Note! • The descriptions in this manual are subject to change without prior notice. • In preparing the document, efforts have been made to ensure that the information in it is ac- curate. • The parts used for the printers are sensitive and, oki 9650 error 133, if handled improperly, may be damaged. It is strongly recommended that the products are maintained by maintenance men registered with Oki Data. • Bios halt on all error may be crept into the document. Oki Data assumes no responsibility for any damage resulting from, or claimed to be the results of, those repairs, adjustments or modifications to the printers which are made by users using the manual, oki 9650 error 133. • Be sure to eliminate static electricity before starting work. TH Rev. 3 3 /

Oki C, C, Maintenance Manual preview img 4

Oki Data CONFIDENTIAL In order to use the product with safety In order to use the product with safety, make sure to read the user's manual (this manual) before using the product. General Caution Do not touch the safety switch kindle 5 update error 3 the internal parts of the printer. Electric shock may occur due to the occurrence of high pressure. The rotation of the gear may also cause injury. Do not use an extremely flammable spray around the printer. Fire may occur because of parts with high temperature. Please let our staff in Customer Center know after unplugging main connector when the cover gets extremely hot, is smoking, emits questionable odor, or is making strange noise. Fire may occur. Please let our staffs oki 9650 error 133 Customer Center know after unplugging main connector when liquid such as water goes into the printer. Fire may occur. Please take a foreign object away after unplugging when you drop foreign objects such as clips into the printer. That situation may case electric shock, fire, and/or injury. Do not conduct an operation or an analysis other than specified in user's manual. That situation may case electric shock, fire, and/or injury. Please let our staffs in Customer Center know after unplugging mains connector when the printer has fallen down or damaged. That situation may case electric shock, fire, and injury. Do not connect the power cord, the printer cable, or the ground wire other than instructed in user's manual. Fire can be induced if misused. Do not insert objects at the vent hole. Do not operate the printer with the rear cover opened. Electric shock, fire, and/or injuries may occur. Do not place a cup with liquid on the printer. Electric shock, fire, and/or injuries may occur. TH Rev. 3 4 /

Oki C, C, <i>oki 9650 error 133</i>, Maintenance Manual preview img 5

Oki Data CONFIDENTIAL Risk of explosion if battery is replaced by an incorrect type. Battery of the printer need not to be replaced. Do not touch the battery. Replace the whole board to replace the CU main board. In the case of replacing batteries at board repairs, replace with the specified type ones. Installation of another type batteries may result in explosion. Caution for used batteries are stop error 0x00000067 follows; do not recharge, force open, heat or dispose of in fire. When open the printer cover, do not touch the fuser unit. You may get burned. Do not throw toner cartridges, or image drum cartridges into fire. You may get burned by dust explosion. We do not guarantee operations when Oki 9650 error 133 (Uninterruptible Oki 9650 error 133 Supply) is used. Do not use UPS. It may cause fire. Do not go near an ejection area while the power is on and in printing. You may get injured. TH Rev. 3 5 /

Oki C, C, Maintenance Manual preview img 6

Oki Data CONFIDENTIAL Contents 1. Configuration 9 System Configuration 9 Printer Composition 10 Optional Composition 11 Specifications 13 Interface Specifications 15 USB Interface Specifications 15 Network Interface Specifications 16 Parallel Interface Specifications 17 2. Descriptions of Operations oki 9650 error 133 Main Control PCB 21 Engine Control PCB (S2V PWB) 25 Power Unit 26 Mechanical process 27 Electrophotographic Processing Mechanism 28 Paper Processing Mechanism Sensor 41 Paper-Related Runtime error + at 1 0 41 Other Sensors 42 Color Drift Autocad lt internal error gedit 3 Image Transfer Control According to Environmental Change (Room Temperature and Relative Humidity) Paper Jam Detector Cover Open Toner Low Detection Paper Size Detection Power ON Process Self-Diagnostic Test Color Drift Detection 51 Reading Version of Routine Replacement Units 52 Life Counter of Replaceable Units 52 Toner Exception in thread main java.lang.nosuchfielderror Level Detection 52 3. Printer Installation 53 Precautions and Prohibition Printer Unpacking Procedure Printer Installation Instructions Packed Units and Attachments 57 Assembly Procedure Printer Main Body Power Cable Connection Installation of Optional Components Checking of Optional-Component Recognition MenuMap Printing How to Connect 87 Checking of User Paper TH Rev. 3 6 /

Oki C, C, <i>oki 9650 error 133</i>, Maintenance Manual preview img 7

Oki Data CONFIDENTIAL 4. Parts Replacement 91 Precautions When Replacing Parts 91 Parts Layout Parts Replacement Method Cover-Rear, Cover-Side (R), and Cover-Side (R) Rear Cover-Side (L) and Cover Assy-Front Stacker Assy-FU Cover Assy-OP Panel, Cover-Guard (R), Cover-Guard (Front) and Cover-Guard (L) OP PCB Cover Assy-Top FAN-PCB-Assy, CU-Board-Assy and S2V-PU-Board Job-Offset-Assy and Basket-Assy Plate Top Assy Eject-Assy Motor-Pulse-Belt and Sensor-Resist-Assy FDR Unit-MPT FDR Unit-Resist Duct Assy HV-Assy Power Unit Low Voltage Power Source Assy and Motor-FAN Belt-Assy Fuser Unit-LBT Unit-Duplex Paper Feed Roller MPT Feed Roller 5. Adjustment System Maintenance Menu ID Check Pattern Print (“TEST PRINT MENU” Item) Maintenance Menu and Its Function Maintenance Menu Engine Maintenance Mode Various Printing Methods with a Stand-Alone Printer Coming with a Controller Adjustment After Replacing Parts Precautions when Replacing the Engine Control PCB Precautions Upon EEPROM Replacement CU PCB of dpi Printer and Replacement of Mounted Components Precautions in Key Chip Replacement ( dpi printer) Precautions in EEPROM Replacement ( dpi printer) Precautions in HDD Replacement ( dpi printer) Product Code of Maintenance HDD ( dpi printer) Setup of EEPROM after replacement of TBX PCB Setup of destination Density Correction Paper Thickness Detection/Sensitivity Correction TH Rev. 3 7 /

Oki C, C, Maintenance Manual preview img 8

Oki Data CONFIDENTIAL 6. Routine Replacement Routine Replacement of Consumable Parts Cleaning LED Lens Array Cleaning Pickup Roller Cleaning Cleaning Feed Roller 7. Malfunction Repair Procedure Precautions Before Repairs Items to Check Before Remedying Abnormal Image Precautions Before Remedying Abnormal Image Troubleshooting Preparations Troubleshooting LCD Message List Preparing for Troubleshooting Troubleshooting With Abnormal Image Check Fuse PU Error 8. Connection Diagram Check Resistance Value Diagram of Part Layout of Various PCB 9. Error message list Message Chart of CX/C Illustration appears on the operating panel F/W Revision(C) F/W Rev. table Check abd version display TH Rev. 3 8 /

Oki C, C, Maintenance Manual preview img 9

LED Head Pulse motor Job Offset M M M M M M M Connection PCB Engine Controller Low Voltage Power Unit Fuser Unit 2nd/3rd Tray Large-Volume Paper Tray Double-Side Printer Unit <Sensor, Switch and Thermistor> Paper Conveyor Sensor Paper Size Detector Fuser Temperature Detector Ambient Temperature/Humidity Detector Remaining Toner Level Detector ID, Belt, Fuser Check RFID, slack detection, & phase detection C ID M Fuser M ID Y ID K ID Belt MT/ Resist Hopping Geared Motor Lift up DC motor M Disposal Toner Toner Supply x2 Operation Panel <High Performance Sensor> Heavy Paper Sensor Density Sensor Color Drift Sensor dpi PCB (AS3) USB DC FAN DC FAN Ethernet MFP board error 5100 impressora canon Control Area dpi PCB (TBX) or USB HDD HDD Ethernet DDRS DRAM DIMM × 2 DDRS DRAM DIMM × 2 Centro High Voltage Power Unit M DSP × 6 Scanner for MFP configuration Oki Data CONFIDENTIAL 1. CONFIGURATION System Configuration Figure illustrates the System Configuration of this printer. TH Rev. 3 9 / Belt Unit Y-ID Unit M-ID Unit C-ID Unit Figure K-ID Unit

Oki C, C, Maintenance Manual preview img 10

Oki Data CONFIDENTIAL Printer Composition The internal part of the printer consists of the following parts. • Digital Photo Processor • Paper Travel Path • Control Unit (CU and PU) • Operation Panel • Power Source (High Voltage Area/Low Voltage Area) Figure illustrates the printer composition, oki 9650 error 133. Figure TH Rev. 3 10 /

OKI C

  • Catalog

  • Sign In

  • Contacts

  • Forum

  • Eng

    Error Codes List page 7

    • Code:
    • Display: Service Call Y Head M Head C Head K Head
    • Description: After turning ON the power or when cover is closed, the sensor detects that the unit is missing.
    • Remedy: 1) Is an Error message displayed? 2) Is the LED head properly mounted? 3) Does the Error take place again?
      ICheck the OED head unit. Turn ON power again. Replace the LED head Assy.
    • Code:
    • Display: Service Call Y M Error
    • Description: Color ID up/down error is detected.
    • Remedy: 1) Is an Error message displayed? 2) Does the Error take place again?
      Turn ON power again. Confirm that the Y, M, and C ID units are in position, and reboot.
    • Code:
    • Display: Service Call Y ID M ID C ID K ID
    • Description: This is indicated when the toner feed switch error or the toner locklever- open error occurs repeatedly when new toner is used.
    • Remedy: 1) Is the toner lock-lever-open error indicated? 2) Does the problem persist even if the ID units are replaced?
      Confirm that the lever is in position. Replace the toner feed unit. Replace the ID units.
    • Code:
    • Display: Service Call Y M Oki 9650 error 133 K
    • Description: When ID unit fuse cannot be cut.
      Check if the ID Unit is normally mounted.
    • Remedy: Check if the ID Unit is normally mounted. Yes Check cable connection, then replace engine PCB.
    • Code:
    • Display: Service Call Error
    • Description: When belt unit fuse cannot be cut.
    • Remedy: Is the belt unit mounted normally? Yes Check cable connection, then replace engine PCB.
    • Code:
    • Display: Service Call Error
    • Description: When fuser unit fuse oki 9650 error 133 be cut.
    • Remedy: Is the fuser unit mounted normally? Yes Check cable connection, then replace engine PCB.

    PrintCopy .info service -

    Error Code
    Parts Catalog
    Service Mode, Troubleshooting
    Compatibility
    Home

    1 Comments

    Leave a Comment