Oki 231 error 03

oki 231 error 03

Troubleshooting Guides: Is the cable from the CU/PU board to the toner sensor board connected properly? Re-connect it properly. Replace the. IA TAG interface error was detected. 01: A short-circuit error. 03: TAG communication error. fuser unit. Turn off and on the MFP. Be sure of cable. Code: 231 · Display: Service call 231: Error · Description: RFID reader I/F error. Interface error with the RFID reader is detected. 01: Communication error. oki 231 error 03

watch the video

Oki Pro8432wt Start to Finish using TransferRip Software Rasterization Light and Dark Color t shirts

OKI ES4132 Error Code

OKI ES4132 Error Code List

– Compatible model: OKI ES4132
– OKI ES4132 error code list and quick guide oki 231 error 03 OKI ES4132 Error Code List Error csc write samsung Download:  OKI ES4132 Error Code

  • Code: 002, 003, 005, FFF
  • Display: POWER OFF/ON 002:ERROR 003:ERROR 005:ERROR FFF:ERROR
  • Description: CPU Exception
  • Troubleshooting Guides: Is the error display provided again? Yes Turn off and on the SFP. Replace the CU/ PU board.
  • Code: 030
  • Display: SERVICE CALL 030:ERROR
  • Description: CU RAM Check Error
  • Troubleshooting Guides: Is the error display provided again? Yes Oki 231 error 03 off and on the SFP. Replace the CU/ PU board.
  • Code: 040
  • Display: SERVICE CALL 040:ERROR
  • Description: CU EEPROM error
  • Troubleshooting Guides: Is the error display provided again? Yes Turn off and on the SFP. Replace the CU/ PU board.
  • Code: 042, 043
  • Display: SERVICE CALL 042:ERROR 043:ERROR
  • Description: Flash memory file system error
  • Troubleshooting Guides: Accessing the flash ROM directly mounted on the CU/ PU board failed. Turn off and on the SFP. Replace the CU/ PU board.
  • Code: 067
  • Display: SERVICE CALL 067:ERROR
  • Description: IM Communication Error
  • Troubleshooting Guides:
  • Code: 069
  • Display: SERVICE CALL 069:ERROR
  • Description: NIC Chip Error
  • Troubleshooting Guides:

OKI ES4132 error code

  • Code: 070
  • Display: POWER OFF/ON 070:ERROR
  • Description: PostScript error
  • Troubleshooting Guides: Error is deteced inside the postscript core Take note of the address that is displayed on LCD. Turn off and on the SFP.
  • Code: 072
  • Display: POWER Kazakhstan banknote error 072:ERROR
  • Description: Engine interface error or PU-CU interface err
  • Troubleshooting Guides: Is the CU/PU board installed properly?
    Reinstall the CU/ PU board properly. Replace the CU/ PU board.
  • Code: 073
  • Display: POWER OFF/ON 073:ERROR
  • Description: Video error. An error was detected in expanding image data (an invalid data was received)
  • Troubleshooting Guides: Is the CU/PU board installed properly? Does the error occur again?
    Reinstall it properly. Change the PC to a highspecification one or decrease the resolution, and perform printing again. Replace the CU/ PU board. Replace the interface cable. Reinstall the PC printer driver.
    Is the CU/PU board installed properly? Does the error occur again? Does the error depend on print data?
    Reinstall it properly. Perform printing again. Print other data. Replace the CU/PU board. Ask design people to analyze the data.
  • Code: 075
  • Display: POWER OFF/ON 075:ERROR
  • Description: Video error. An error was detected in expanding image data.
  • Troubleshooting Guides: Is oki 231 error 03 CU/PU installed properly? Reinstall it properly. Replace it.
  • Code: 077
  • Display: POWER OFF/ON 077:ERROR
  • Description: VIC Illegal Decomp Error
  • Troubleshooting Guides:
  • Code: 081
  • Display: SERVICE CALL 081:ERROR
  • Description: Parameter matching check error
  • Troubleshooting Guides: Reading from or writing into EEPROM or flash memory cannot be made properly. Turn off and on the SFP. Replace the CU/ PU board when the symptom persists.
  • Code: 098
  • Display: SERVICE CALL 098:ERROR
  • Description: Power Control Error
  • Troubleshooting Guides:
  • Code: 104
  • Display: SERVICE CALL 104:ERROR
  • Description: An engine EEPROM read/write error was detected.
  • Troubleshooting Guides: Does the error occur again? Yes Turn off and on the SFP. Replace the CU/PU board.
  • Code: 106
  • Display: SERVICE CALL 106:ERROR
  • Description: Engine control logic error
  • Troubleshooting Guides: Does the error occur again? Yes Turn off and on the SFP. Replace the CU/PU board.
  • Code: 112
  • Display: SERVICE CALL 112:ERROR
  • Description: The 2nd tray for a model different from the SFP was detected.
  • Troubleshooting Guides: Is the 2nd tray for the SFP installed? No Install proper 2nd tray.
  • Code: 121
  • Display: SERVICE CALL 121:ERROR
  • Description: High-voltage power supply interface error
  • Troubleshooting Guides: Is the cable between the CU/ PU board and the highvoltage power unit connected properly? Is a contact faulty?
    Reconnect it properly. Check the highvoltage line for no poor connection, oki 231 error 03. Replace the highvoltage power supply.
  • Code: 122
  • Display: SERVICE CALL 122:ERROR
  • Description: Power Supply Fan error
  • Troubleshooting Guides: Does the oki 231 error 03 at the rear of the SFP operate? Is the connector of the fan connected properly?
    Be sure of the connection of the fan. Replace the CU/PU board. Connect the fan properly. Replace the CU/PU board.

– OKI ES4132 Error Code

  • Code: 123
  • Display: SERVICE CALL 123:ERROR
  • Description: Ambient humidity error or non connection of humidity sensor
  • Troubleshooting Guides: Is the cable from the CU/PU board to the toner sensor board connected properly?
    Re-connect it properly. Replace the toner sensor board.
  • Code: 124
  • Display: SERVICE CALL 124:ERROR
  • Description: Ambient temperature error
  • Troubleshooting Guides: Is the cable from the CU/PU board to the toner sensor board connected properly?
    Re-connect it properly. Replace the toner sensor board.
  • Code: 126
  • Display: POWER OFF AND WAIT FOR Bios time error WHILE 126:CONDENSING ERROR
  • Description: Sensor Dewed Error
  • Troubleshooting Guides:
  • Code: 127
  • Display: SERVICE CALL 127:ERROR
  • Description: An error of exhaust fan of the Fuser
  • Troubleshooting Guides: Is the fan’s connector properly connected? Does the error occur again?
    Connect properly. Replace the fan’s motor. Replace the PU board.
  • Code: 128
  • Display: SERVICE CALL 128:ERROR 05
  • Description: Image drum fan error
  • Troubleshooting Guides: Is the connector of the fan connected properly? Does the error occur again?
    Re-connect it properly. Replace the fan motor. Replace the CU/PU board.
  • Code: 134
  • Display: SERVICE CALL 134:ERROR
  • Description: LED head detection error (134=K)
  • Troubleshooting Guides: Is the LED head installed properly? Is the LED head fuse broken? Does the error occur again?
    Install the LED head unit. Check the LED head fuse. Check the fuse. Turn off and on the SFP. Replace the LED head unit.
  • Code: 153
  • Display: SERVICE CALL 153:ERROR
  • Description: Image drum unit fuse-cut error
  • Troubleshooting Guides: Is the image drum unit installed properly? Does the error occur again? Dj skinhead - extreme terror gangster mix the SFP recovered by replacing the toner sensor board.
    Re-install it. Turn off and on the SFP. Be sure of the cable connection from the CU/PU board to the toner sensor board, and then replace the toner sensor board. Replace the CU/PU board.
  • Code: 163
  • Display: SERVICE CALL 163:ERROR
  • Description: Toner sensor detection error (163=K), oki 231 error 03. This error does not occur with the SFP in the factory shipped configuration.
  • Troubleshooting Guides: Is the toner cartridge installed? Is the toner slide shutter set?
    Install the toner cartridge. Turn it to the fixed position. Turn off and on the SFP. Replace the toner sensor assembly.
  • Code: 170, 171
  • Display: SERVICE CALL 170:ERROR 171:ERROR
  • Description: A fuser thermistor short or open circuit was detected.
  • Troubleshooting Guides: Does the error occur again? Yes Turn off and on the SFP. Replace the fuser unit.
  • Code: 172, 173
  • Display: SERVICE CALL 172:ERROR 173:ERROR
  • Description: A fuser thermistor temperature error (high or low temperature) was detected.
  • Troubleshooting Guides: Does the error occur again? Turn off and on the SFP. Replace the fuser unit, oki 231 error 03. Replace the lowvoltage power supply, and then replace the CU/PU centos 5 php error log when the error occurs again.
  • Code: 182
  • Display: SERVICE CALL 182:ERROR
  • Description: Option unit I/F error
  • Troubleshooting Guides: Does the error occur again? Turn off and on the SFP. Be sure of connector connection. Replace the option unit.
  • Code: 190
  • Display: POWER OFF/ON 190:ERROR
  • Description: System memory overflow
  • Troubleshooting Guides: Does the error occur again? Yes Turn off and on the SFP. Replace the CU/PU board.

– OKI ES4132 troubleshooting solutions

  • Code: 203 … 214
  • Display: POWER OFF/ON 203:ERORR * 204:ERORR 207:ERORR 208:ERORR 213:ERORR 214:ERORR
  • Description: CU program error (203 to 214 do not occur in general use of the SFP)
  • Troubleshooting Guides: Invalid processing was performed with a CU program. Replace the CU/PU board.
  • Code: 209
  • Display: vbscript error next POWER OFF/ON 209:DOWNLOAD ERROR
  • Description: Custom Media Type table downloading failure
  • Troubleshooting Guides: Custom Media Type table downloading failed. Turn off and on the SFP, and then redownload it (In general use of the SFP, this downloading is not performed and this error does not occur).
  • Code: 230
  • Display: SERVICE CALL 230:ERROR
  • Description: TAG Reader not installed
  • Troubleshooting Guides:
  • Code: 231
  • Display: SERVICE CALL 231:ERROR
  • Description: TAG interface error. IA TAG oki 231 error 03 error was detected. 01 : A short-circuit error. 02 : TAG communication error.
  • Troubleshooting Guides: Be sure the toner cartridges and the image drums are properly set, oki 231 error 03. Replace the toner cartridges. When the error occurs again after the image drums are reinstalled, be sure of the cable connection from the CU/PU board to the toner sensor board.
  • Code: 923
  • Display: POWER OFF/ON 923:ERROR
  • Description: A lock error with black image drum
  • Troubleshooting Guides: The image drum does not revolve properly. Does the error display is provided again by turning off and on the SFP?
    Be sure the image drum is properly installed properly. Replace the image drum unit. Replace the image drum motor.
  • Code: 933
  • Display: POWER OFF/ON 933:ERROR
  • Description: Tray-2 CPU clock frequency error
  • Troubleshooting Guides: The error is occurred when Factory mode only.
  • Code: 941 … 946
  • Display: POWER OFF/ON 941:ERROR 942:ERROR 943:ERROR 944:ERROR 946:ERROR
  • Description: PU Error
    A PU error was detected. 941 : Watch Doc Timer Error 942 : Detection of Unassigned Interruption 943 : CPU Error Detection 944 : Dcon Access Error 946 : AC Voltage Zerocrossing Error
  • Troubleshooting Guides: Turn off and on the SFP. When this error occurs again, replace the CU/ PU board. The 946 error is occurred when Factory mode only.
  • Code: 982
  • Display: SERVICE CALL 982:ERROR
  • Description: Excessive Optional Tray Detected
  • Troubleshooting Guides:
  • Code: 984
  • Display: SERVICE CALL 984:ERROR
  • Description: Black Tag Version Mismatch
  • Troubleshooting Guides:

Contact Support To Fix OKI ES4132 Error

Mobile/ Whatsapp: (+0084)915 589 236
Telegram: https://t.me/nguyendangmien
Skype: nguyendangmien
Facebook: https://www.facebook.com/nguyendangmien

Filed Under: OKITagged With: OKI ES4132 Error, OKI ES4132 repair service, OKI ES4132 troubleshooting

OKI MC362w Error Codes list and solutions

OKI MC362w Error Codes list and solutions

– Compatible Printer model: OKI MC362w
– OKI MC362w Error Code description:

  • Code: 001
  • Description: Machine Check Exception
    A hardware error was detected (board failure or insufficient power supply capacity).
  • Troubleshooting Guides: Replace the CU/ PU board.
  • Code: 002, 006, 009, 011
  • Description: CPU Exception
  • Troubleshooting Guides: Is the error display provided again? Remove any RAM DIMM and turn off and on the MFP. Replace the CU/ PU board. Reinstall the RAM DIMM.
  • Code: 020
  • Description: CU Oki 231 error 03 Hash Check Error
  • Troubleshooting Guides: Is the error display provided again? Yes Turn off and on the MFP, oki 231 error 03. Replace the CU/ PU board.
  • Code: 024, 025
  • Description: Kanji Font Error
  • Troubleshooting Guides:
  • Code: 030
  • Description: CU RAM Check Error
  • Troubleshooting Guides: Is the error display provided again? Yes Turn off and on the MFP. Replace the CU/ PU board.
  • Code: 031 … 036
  • Description: CU optional RAM check error
  • Troubleshooting Guides: Is RAM DIMM installed properly? Does the MFP recover by replacing the RAM DIMM?
    Reinstall the RAM DIMM. Replace the RAM DIMM. Replace the CU/ PU board.
  • Code: 040
  • Description: CU EEPROM error
  • Troubleshooting Guides: Is the error display provided again? Oki 231 error 03 Turn off and on the MFP. Replace the CU/ PU board.
  • Code: 041
  • Description: CU flash memory error or CU/PU board flash ROM error
  • Troubleshooting Guides: Is the error display provided again? Yes Turn off and on the MFP. Replace the CU/ PU board.
  • Code: 042 … 045
  • Description: Flash memory file system error
    Accessing the flash ROM directly mounted on the CU/ PU board failed.
  • Troubleshooting Guides: Accessing the flash ROM directly mounted on the CU/ PU board failed. Turn oki 231 error 03 and on the MFP. Replace the CU/ PU board.
  • Code: 052
  • Description: Image processor driver error
  • Troubleshooting Guides: Is the error display provided again? Yes Turn off and on the MFP. Replace the CU/ PU board.
  • Code: 054
  • Description: A communication error of the scanner unit
    A communication error was detected between the Controller and scanner unit.
  • Troubleshooting Guides: Record a value displayed far right at the bottom of LCD and turn on the power unit again.
  • Code: 055
  • Description: A communication error of the scanner unit
    The Controller detected an error after communication between the Controller and scanner unit was established.
  • Troubleshooting Guides: Call for service to review the connection between the scanner and printer or to replace the device if the symptom persists after you turn on the power unit again.

OKI MC362w error code

Solve OKI MC362w Error codes

  • Code: 057
  • Description: The timeout of command communication of the scanner
    The timeout of command communication was detected between the Controller and scanner unit (A sub code indicates a cause).
    01: There is no ACK for a command to start scanning.
    02: There is no ACK for a command to cancel scanning.
    03: There is no ACK for a command to cancel SIP.
  • Troubleshooting Guides: Record a value displayed far right at the bottom of LCD and turn off/on the power unit.
  • Code: 058
  • Description: An error of the scanner controlling area
    An internal error was detected in the scanner controlling area ofthe Controller.
  • Troubleshooting Guides: Record a value displayed far right at the bottom of LCD and turn off/on the power unit.
  • Code: 059
  • Description: A communication error of the scanner unit
    The scanner unit detected an error after communication between the Controller and scanner unit was established.
  • Troubleshooting Guides: Call for service to review the connection between the scanner and printer or to replace the device if the symptom persists after you turn on the power unit again.
  • Code: 064
  • Description: SD Card Missing Error
  • Troubleshooting Guides: Is a SD Card installed in the unit, properly?
  • Code: 067, 068
  • Description: Interface monitor error
  • Troubleshooting Guides:
  • Code: 069
  • Description: NIC Chip Error
  • Troubleshooting Guides:
  • Code: 070
  • Description: PostScript error
    Error is deteced inside the postscript core
  • Troubleshooting Guides: Take note of the address that is displayed on LCD. Turn off and on the MFP.
  • Code: oki 231 error 03 Engine interface error or CU-PU interface error
  • Troubleshooting Guides: Is the CU/PU board installed properly?
    Reinstall the CU/ PU board properly. Replace the CU/ PU board.
  • Code: 073
  • Description: Video error. An error was detected in expanding image data (an invalid data was received)
  • Troubleshooting Guides: Is the CU/PU board installed properly? Does the error occur again?
    Reinstall it properly. Change the PC to a high-specification one or decrease the resolution, and perform printing again. Replace the CU/ PU board. Replace the interface cable. Reinstall the PC printer driver.
    Is the Visual c+ + runtime error san andreas board installed properly? Does the error occur again? Does the error depend on print data?
    Reinstall pixima 160 error 5 properly. Perform printing again. Print other data. Replace the CU/PU board. Ask design people to analyze the data.
  • Code: 074, 075
  • Description: Video error. An error was detected in expanding image data.
  • Troubleshooting Guides: Is the CU/PU installed properly? Reinstall it properly. Replace it.
  • Code: 081
  • Description: Parameter matching check error
    Reading from or writing into EEPROM or flash memory cannot be made properly.
  • Troubleshooting Guides: Reading from or writing into EEPROM or flash memory cannot be made properly. Turn off and on the MFP. Replace the CU/ PU board when the symptom persists.
  • Code: 104
  • Description: An engine EEPROM read/write error was detected.
  • Troubleshooting Guides: Does the error occur again? Yes Turn off and on the MFP Replace the CU/PU board.
  • Code: 106
  • Description: Engine control logic error
  • Troubleshooting Guides: Does the error occur again? Yes Turn off and on the MFP Replace the CU/PU board.
  • Code: 111
  • Description: Oki 231 error 03 unit for a different model was detected.
  • Troubleshooting Guides: Is Duplex unit for the model installed? No Install a correct Duplex unit.
  • Code: 112
  • Description: The 2nd tray for a model different from the MFP was detected.
  • Troubleshooting Guides: Is the 2nd tray for the MFP installed? No Install proper 2nd tray.
  • Code: 121
  • Description: High-voltage power supply interface error
  • Troubleshooting Guides: Is the cable between the CU/ PU board and the highvoltage power unit connected properly? Is a contact faulty?
    Reconnect it properly. Check the highvoltage line for no poor connection. Replace the highvoltage power supply.
  • Code: 122
  • Description: Rear-fan error
  • Troubleshooting Guides: Does the fan at the rear of the MFP operate? Is the connector of the fan connected properly?
    Be sure of the connection of the fan. Replace the CU/PU board. Connect the fan properly. Replace the CU/PU board.
  • Code: 123
  • Description: Ambient humidity error or non connection of humidity sensor
  • Troubleshooting Guides: Is the cable from the CU/PU board to the toner sensor board connected properly?
    Re-connect it properly. Replace the toner sensor board.
  • Code: 124
  • Description: Ambient temperature error
  • Troubleshooting Guides: Is the cable from the CU/PU board to the toner sensor board connected properly?
    Re-connect it properly. Replace the toner sensor board.
  • Code: 126
  • Description: Condensation on the device was detected.
  • Troubleshooting Guides: Condensation is likely to form in such a case that a device is carried in from the outdoors. Leave the device untouched for two hours to a half day and turn on the power unit. Does the error occur again? Yes Leave the device untouched and turn on the power unit. Replace a control panel board.
  • Code: 127
  • Description: An error of exhaust fan of the Fuser
  • Troubleshooting Guides: Is the fan’s connector properly connected? Does the error occur again?
    Connect properly. Replace the fan’s motor. Replace the PU board.
  • Code: 128:05
  • Description: Image drum fan error
  • Troubleshooting Guides: Is the connector of the fan connected properly? Does the error occur again?
    Re-connect it properly. Replace the fan motor. Replace the CU/PU board.
  • Code: 128:08
  • Description: Front fan error
  • Troubleshooting Guides: Is the connector of the fan connected properly? Does the error occur again?
    Re-connect it properly. Replace the fan motor. Replace the CU/PU board.
  • Code: 131 … 134
  • Description: LED head detection oki 231 error 03 (131=Y, 132=M, 133=C, 134=K)
  • Troubleshooting Guides: Oki 231 error 03 the LED head installed properly? Is the LED head fuse broken? Does the error occur again?
    Install the LED head unit. Check the LED head fuse. Check the fuse. Turn off and on the MFP. Replace the LED head unit.
  • Code: 142
  • Description: Image drum up-down movement position detection error
  • Troubleshooting Guides: Is the image drum unit removed and installed smoothly? Is the connector of the image drum up-down clutch is connected oki 231 error 03 Re-install it. Internal error 8027 sure of the connection of the image drum up-down clutch connector. Replace the toner sensor board. Connect the image drum updown clutch properly.
  • Code: 153
  • Description: Image drum unit fuse-cut error
  • Troubleshooting Guides: Is the image drum unit installed properly? Does the error occur again? Is the MFP recovered by replacing the toner sensor board.
    Re-install it. Turn off and on the MFP. Be sure of the cable connection from the CU/PU board to the toner sensor board, and then replace the toner sensor board. Replace the CU/PU board.
  • Code: 154
  • Description: Belt unit fusecut error
  • Troubleshooting Guides: Is the belt unit installed properly? Does the error occur again?
    Re-install it. Turn off and on the MFP. Be sure of cable connection, and then replace the CU/PU board.
  • Code: 155
  • Description: Fuser unit fuse-cut error
  • Troubleshooting Guides: Is the fuser unit installed properly? Does the error occur again?
    Clean the connection connector of the fuser unit, and then re-install the fuser unit. Turn off and on the MFP. Putty fatal error server sent disconnect message sure of cable connection, and then replace the CU/PU board.
  • Code: oki 231 error 03 … 163
  • Description: Toner sensor detection error (160=Y, 161=M, 162=C, 163=K). This error does not occur with the MFP in the factory shipped configuration.
  • Troubleshooting Guides: Is the toner cartridge installed? Is the toner slide shutter set?
    Install the toner cartridge. Turn it to the fixed position. Turn off and on the MFP. Replace the toner sensor assembly.
  • Code: 167
  • Description: Thermistor slope error
  • Troubleshooting Guides: Does an error message appear? Does the error occur again?
    Turn off and on the MFP. Turn off and on the MFP after leaving it for 30 minutes.
  • Code: 168
  • Description: Compensation thermistor error
  • Troubleshooting Guides: Does an error message appear? Does the error occur again? Yes Turn off and on the MFP. Turn off and on the MFP after leaving it for 30 minutes.
  • Code: 169
  • Description: An error of the Upper Side Thermistor
  • Troubleshooting Guides: Does the error occur again? Yes Turn on the power unit. Leave the device for 30 minutes and turn on the power unit again.
  • Code: 170, 171
  • Description: A fuser thermistor short or open circuit was detected.
  • Troubleshooting Guides: Does the error occur again? Yes Turn off and on the MFP. Replace the fuser unit.
  • Code: 172 … 173
  • Description: A fuser thermistor temperature error (high or low temperature) was detected.
  • Troubleshooting Guides: Does the error occur again? Turn off and on the MFP. Replace the fuser unit. Replace the lowvoltage power supply, and then replace the CU/PU board when the error occurs again.
  • Code: 174
  • Description: A backup thermistor shot circuit was detected (high temperature)
  • Troubleshooting Guides: Does the error occur again? Yes Turn off and on the MFP. Replace the fuser unit.
  • Code: 175
  • Description: A backup thermistor open circuit was detected (low temperature)
  • Troubleshooting Guides: Does the error occur again? Yes Turn off and on the MFP. Replace the fuser unit.
  • Code: 176, 177
  • Description: A backup thermistor temperature error (high or low temperature) was detected.
  • Troubleshooting Guides: Does the error occur again? Turn off and on the MFP. Replace the fuser unit. Replace the lowvoltage power supply.
  • Code: 182
  • Description: Option unit I/F error
  • Troubleshooting Guides: Does the error occur again? Turn off and on the MFP. Be sure of connector connection. Replace the option unit.
  • Code: 190
  • Description: System memory overflow
  • Troubleshooting Guides: Does the error error 52 printing visual basic again? Yes Turn off and on the MFP, oki 231 error 03. Replace the CU/PU board.
  • Code: 200, oki 231 error 03, 201, 202
  • Description: PU firmware download error
    An error occurred in rewriting the PU firmware.
  • Troubleshooting Guides: An error occurred in rewriting the PU firmware. Turn off and on the MFP, and then redownload it (In general use of the MFP, this re-writing is not performed and this error does not occur).
  • Code: 203 … 214
  • Description: CU program error (203 to 214 do not occur in general use of the MFP)
    Invalid processing was performed with a CU program.
  • Troubleshooting Guides: Replace the CU/PU board.
  • Code: 209
  • Description: Custom Media Type table downloading failure
    Custom Media Type table downloading failed.
  • Troubleshooting Guides: Turn off and on the MFP, and then redownload it (In general use of the MFP, this downloading is not performed and this error does not occur).
  • Code: 231
  • Description: TAG interface error
    IA TAG interface error was detected.
    01 : A short-circuit error.
    03 : TAG communication error.
  • Troubleshooting Guides: Be sure the toner cartridges and the image drums are properly set. Replace the toner cartridges. When the error occurs again after the image drums are re-installed, oki 231 error 03, be sure of the cable connection from the CU/PU board to the toner sensor board.
  • Code: 250
  • Description: SD card error
  • Troubleshooting Guides:
  • Code: 251
  • Description: SD card erasure error
  • Troubleshooting Guides:
  • Code: 252 … 255
  • Description: oki 231 error 03 SD card security error
  • Troubleshooting Guides:
  • Code: 256, oki 231 error 03, 257
  • Description: SD card error
  • Troubleshooting Guides:
  • Code: 802 … 808
  • Description: SU Exception
  • Troubleshooting Guides: Does the error occur again? Yes Turn off and on the MFP. Replace the SU board.
  • Code: 809
  • Description: SU NAND ECC Error
    The ECC error that restoration was impossible vsftpd error 530 in NAND FLASH of SU.
  • Troubleshooting Guides:
  • Code: 811, 812, 813
  • Description: SU Communication Error
    Communication error between the Controller and the Scanner Unit is detected.
  • Troubleshooting Guides: Turn off and on the MFP.
  • Code: 814
  • Description: SU FW Removed
    It is an error to notify that SU FW was erased by special key operation from a panel.
  • Troubleshooting Guides:
  • Code: 890
  • Description: SU System Memory Overflow
  • Troubleshooting Guides: Does the error occur again? Yes Turn off and on the MFP. Replace the SU board
  • Code: 899
  • Description: CU Disconnect
    In the situation that communication between CU and SU was able to establish, SU FW detected that CU FW had disappeared from a communications path (an USB line).
  • Troubleshooting Guides: Is the cable from the belt thermistor to the CU/PU board connected properly? Does the error occur again?
    Connect the cable properly. Turn off and on the MFP. Replace the belt thermistor.
  • Code: 901 … 904
  • Description: Belt temperature error
    901: Short circuit
    902: Open circuit
    903: High temperature
    904: Low temperature
  • Troubleshooting Guides: Is the cable from the belt thermistor to the CU/PU board connected properly? Does the error occur again?
    Connect the cable properly. Turn off and on the MFP, oki 231 error 03. Replace the belt thermistor.
  • Code: 918
  • Description: An alarm of Duplex Fan was detected.
  • Troubleshooting Guides: An error of a fan inside the Duplex, oki 231 error 03. Is it reproduced by turning on thepower unit?
    Review rampage 2 extreme cmos error or not the Duplex is installed properly. Review whether or not the fan oki 231 error 03 installed properly, oki 231 error 03. Replace the fan.
  • Code: 923
  • Description: A lock error with black image drum
    The image drum does not revolve properly.
  • Troubleshooting Guides: The image drum does not revolve properly. Does the error display is provided again by turning off and on the MFP?
    Be sure the image drum is properly installed properly, oki 231 error 03. Replace the image drum unit. Replace the image drum motor.
  • Code: 928
  • Description: Fuser motor lock error
  • Troubleshooting Guides: The fuser does not operate properly? Does the error occur again?
    Check that the fuser is properly installed. Replace the fuser. Replace the fuser motor.
  • Code: 933
  • Description: Tray-2 CPU clock frequency error
  • Troubleshooting Guides:
  • Code: 941, 942, 943, 944
  • Description: PU Error
    A PU error was detected.
    941 : Watch Doc Timer Error
    942 : Detection of Unassigned Interruption
    943 : CPU Error Detection 944 : Dcon Access Error
  • Troubleshooting Guides: Turn off and on the MFP. When this error occurs again, oki 231 error 03, replace the CU/ PU board.
  • Code: 980
  • Description: Media jamming error around fuser.
    Media is jammed by entangling around the fuser.
  • Troubleshooting Guides: Turn off the MFP. Replace the fuser.
  • Code: 983
  • Description: Duplicate toner cartridge detection error
    Multiple toner cartridges for the same color ware detected.
  • Troubleshooting Guides: Install toner cartridges for specified colors at the proper positions.
  • Code: 990
  • Description: Waste toner sensor detection error
  • Troubleshooting Guides: Is the K toner cartridge installed? Does the error occur again?
    Install the K toner cartridge. Be sure of cable connection, and then perform board replacement.
  • Code: 991
  • Description: TAG Color Information Error
    A tag of unsettled color information was detected.
  • Troubleshooting Guides:
  • Code: FFE, FFF
  • Description: CU program error (203 to 214 do not occur in general use of the MFP)
    Invalid processing was performed with a CU program.
  • Troubleshooting Guides: Replace the CU/PU board.


– Get more information about Epson XP 15000 troubleshooting, click here

– Get more error code list with quick guide to fix printer product, click here
– About get help with reseting Epson inkpad or others, click here

Waste Ink Pad Counter Utility Functions:

– Cleaning printhead.
– Ink charge.
– Fix Epson red lights blinking Error

Epson red lights blinking 2

– Fix Epson Service Required Error: A printer’s ink pad at the end of its service life Please contact Epson Support.
Epson red lights blinking 2

– Check the current value of waste ink counters and ink system error 100000d1 counters.
– Clear Waste Ink Counters.
– Read and write serial number.
– Read and write USB ID.
– Read and write HEAD ID.
– Make EEPROM oki 231 error 03, backup.
– Paper feed test.
– Nozzle check.
– Color check pattern.
– Initialize (disable) PF deterioration offset.
– Retrieve device information

Contact us to get support with OKI MC362w Error case

Telegram: https://t.me/hyperaktiv
Facebook: https://www.facebook.com/dngnm/
Or click here to get more ways.

Filed Under: error code, OKITagged With: fix OKI MC362w, OKI MC362w Error, OKI MC362w repair service, OKI MC362w troubleshooting

Error Messages

Message

Error code

Indicator

Cause/Solution

Detected an abnormality of internal database.

The data must be deleted.

After pressing [Enter], the data will be deleted, and then reboot.

-

-

Database in the machine has been broken.

Press «ENTER» button.

PU Flash Error

-

Goes off

Turn off the machine, and then back on.

If the same error occurs, contact your dealer.

Data Present

-

-

Data remains unprinted.

To manually print, oki 231 error 03, press «ON LINE» button.

To delete the data without printing, press «CANCEL» button.

Changing Language

Please wait

-

Blinks

Display language is being changed.

Wait for a while.

Language Change Failed

Error num: %CODE%

-

Blinks

Switching display languages failed.

Press the power button to turn off the machine, and then back on.

XXX

%COLOR% Toner Low.

Search keyword: P10081

-

Lights up

The toner indicated on the screen is low. Have a new toner cartridge ready.

And replace the old image drums with new ones after a message for replacement of image drum appears.

XXX

%COLOR% Waste Toner Full, oki 231 error 03. Replace Toner.

Search keyword: P40028

-

Lights up

Waste toner is full, oki 231 error 03. Replace with a oki 231 error 03 toner cartridge of the oki 231 error 03 color.

The printer can be used for a while when the front cover is opened and closed. However, replace with a new toner cartridge quickly as the image drum might become damaged.

XXX

%COLOR% Toner Sensor Error.

%COLOR% Non Recommended Toner.

Search keyword: P40947

-

Lights up

An optimum toner cartridge is not installed.

Use a toner cartridge that matches your machine.

The print quality is not guaranteed.

XXX

Toner Sensor Error.

Search keyword: P40959

540, 541, 542, 543

Lights up

Something is wrong with the toner sensor of the indicated color or the image drum is not installed correctly.

Install the toner cartridge or image drum of the indicated color correctly.

If the error occurred in Yellow (Y) or Magenta (M), make sure that the blue knob on the belt unit is turned sideway.

If the same error occurs, contact your dealer.

540: Yellow, 541: Magenta (red), oki 231 error 03, 542: Cyan (blue), 543: Black

XXX

Error Postscript

-

-

A postscript error has occurred.

The job has been dismissed.

XXX

PDL Error Occurred

-

-

PDL error has occurred.

To erase the message, press «ENTER» button.

XXX

%COLOR% Image Drum Near Life.

Search keyword: P10076

-

Lights up

Prepare new image drums.

And replace the old image drums with new ones after a message for replacement of image drum appears.

XXX

Fuser Unit Near Life.

Search keyword: P10979

-

Lights up

Prepare a new fuser unit.

And replace the old fuser unit with new ones oki 231 error 03 a message for replacement of fuser unit appears.

XXX

Belt Unit Near Life.

Search keyword: P10978

-

Lights up

Prepare a new belt unit.

And replace the old belt unit with new ones after a message for replacement of belt unit appears.

XXX

Non Recommended Fuser Unit Detected.

Search keyword: P40439

-

Lights up

An optimum fuser unit is not installed.

Use a fuser unit that matches your machine.

The print quality is not guaranteed.

XXX

Change Fuser Unit.

Search keyword: P40971

-

Lights up

The fuser unit reaches its lifetime.

Replace the fuser unit with a new one.

XXX

Non Recommended Belt Unit Detected.

Search keyword: Oki 231 error 03 up

An optimum belt unit is not installed.

Use a belt unit that matches your machine.

The print quality is not guaranteed.

XXX

Change Belt Unit.

Search keyword: P40970

-

Lights up

The belt unit reaches its lifetime.

Replace the belt unit with a new one.

XXX

%COLOR% Toner Empty.

Search keyword: P40028

-

Lights up

The toner indicated on the screen is empty. Replace the empty toner cartridge with a new one.

XXX

%COLOR% Toner Not Installed.

Search keyword: P40902

-

Lights up

The toner cartridge of the indicated color is not installed correctly.

Install the toner cartridge correctly.

XXX

%COLOR% Non Recommended Image Drum Detected.

Search keyword: P40485

-

Lights up

An optimum image drum is not installed.

Use a image drum that matches your machine.

The print quality is not guaranteed.

XXX

%COLOR% Image Drum Life.

Search keyword: P40936

-

Lights up

The image drum indicated on the screen oki 231 error 03 its lifetime.

Replace the image drum with a internal error - incomplete one.

XXX

%COLOR% Image Drum Life, %PAGES% Pages Left.

Search keyword: P40936

-

Lights up

The image drum indicated on the screen reaches its lifetime.

The number of pages you can print is displayed in "%PAGES%".

XXX

%COLOR% Image Drum Life, Print Quality Not Guaranteed.

Search keyword: P40936

-

Lights up

The image drum indicated on the screen reaches its lifetime.

Replace the image drum with a new one.

The print quality is not guaranteed.

XXX

%TRAY% Empty

-

Lights up

No paper is loaded in the indicated tray.

Load paper.

Other trays are available.

XXX

File System is Full

-

Lights up

Memory in the file system is full.

Delete unnecessary files.

XXX

File System is Write Protected

-

Lights up

The file you are trying to write is write-protected.

Contact the printer administrator.

XXX

File Erasing

-

Lights up

Stored document files oki 231 error 03 being deleted.

Wait for a while.

Deleting data

-

Lights up

This machine ran out of color toner. Color print data is being deleted.

Wait for a while.

XXX

Deleting data

-

Lights up

Deleting data stored oki 231 error 03 private printing.

Wait for a while.

XXX

Erased Data Full

-

Lights up

Files supposed to be deleted are full. Erase the files.

XXX

Wait Oki 231 error 03 is Disabled

-

Lights up

Wait Timeout is disabled.

XXX

Job Log Buffer Full(Delete old logs)

-

-

Old job logs were deleted, because job log buffer was full.

XXX

NFC Unit Error. NFC function is not available.

Press ONLINE Button

-

-

There is something wrong in the NFC unit.

Functions related to the NFC are not available.

Turn off the machine, and then back on.

If the same error occurs, contact your dealer. To hide this message, select [Admin Setup] > [Others Setup] > [NFC Setup], and then select [Disable].

XXX

USB Hub Unsupported

Please detach it

-

-

A USB hub is connected, oki 231 error 03. Remove the USB hub.

This machine does not support USB hub.

XXX

Unsupported USB Device Detected

Please detach it

-

-

An unsupported USB device is connected.

Remove the USB device.

XXX

Incompatible USB device connected

Please detach it

-

-

An unsupported USB device is connected.

Remove the USB device.

XXX

No communication with the SNTP server.

-

-

Obtaining current time from the SNTP server failed.

Check the server or network connection.

XXX

Getting target IP failed. Please check DHCP settings.

-

-

The DHCP server cannot be detected.

Check the network connection.

XXX

Collate Fail:Too Many Pages

Press ONLINE Button

-

-

A collate print error has occurred.

Reduce the data amount. If that does not work, reduce the size of the print data.

To erase the message, press «ONLINE» button.

XXX

Failed to read or write the usage management information of Print Quantity

Press ONLINE Button

-

Lights up

The usage management information could not be read.

Press «ONLINE» button.

XXX

Duplex Print Failed

Press ONLINE Button

-

Lights up

For the paper setting that a duplex printing is not possible, it was printed in simplex.

Check the size and thickness of paper.

XXX

Color Restricted. Mono Printed

Press ONLINE Button

-

Lights up

A color print job was converted to a mono print job due to an unauthorized user. Contact your administrator for color printing.

To erase the message, press «ONLINE» button.

XXX

Color Restricted, oki 231 error 03. Job Rejected

Press ONLINE Button

-

Lights up

A color print job was deleted due to an unauthorized user. Contact your administrator for color printing.

To erase the message, oki 231 error 03, press «ONLINE» button.

XXX

Print Restricted. Job Rejected

Press ONLINE Button

-

Lights up

A print job was deleted due to an unauthorized user. Contact your administrator for printing.

To erase the message, press «ONLINE» button.

XXX

Log Buffer is Full. Job Rejected

Press ONLINE Button

-

Lights up

Print data is deleted because the accounting log buffer is full.

Contact a printer administrator and remove the log buffer.

XXX

Expired saved files have been deleted

Press ONLINE Button

-

Lights up

Private printing files whose storage period expired were automatically deleted.

To erase the message, press «ONLINE» button.

XXX

E-mail receiving has been cancelled

Press ONLINE Button

-

Lights up

Indicates that Email receiving has been canceled.

It has the following possibilities.

  • The format of email that has received is illegal or not supported.

  • The attached file is illegal or fatal error expected a file name supported.

  • The attached file that has received is too large.

  • Network connection has disconnected.

XXX

File System Operation failed <nnn>

Press ONLINE Button

-

Lights up

An error has occurred in the file system.

To erase the message, press oki 231 error 03 button.

XXX

Invalid Print Data Received

Press ONLINE Button

-

-

Invalid data received.

If you performed private printing, the data was deleted because it was incomplete. Print again.

To erase the message, press «ONLINE» button.

XXX

Job Log Database Error

Contact the device administrator

Press ONLINE Button

-

-

A data base access error has occurred while writing or reading the job log.

Turning off and on the machine may resolve the problem.

To erase the message, press «ONLINE» button.

XXX

IPv4 Address is conflicted

Change IPv4 Address

-

-

The IP address assigned to this machine is duplicated with that of another device.

Check the IP addresses, and then assign another IP address.

XXX

Error PDF

Press ONLINE Button

-

-

The PDF file is damaged.

Check bass_streamcreateurl error alltunes file.

To erase the message, oki 231 error 03, press «ONLINE» button.

XXX

Invalid Password

Press ONLINE Button

-

-

Notifies that the entered password does not match the password set to encrypted PDF.

The file will not be printed unless the passwords match.

XXX

PDF Cache Write Error

Press ONLINE Button

-

-

Notifies that writing a PDF file to the cache has failed.

To erase the message, press «ONLINE» button.

XXX

Decode error occurred

Press ONLINE Button

-

-

Indicates that an error has occurred during analysis of image oki 231 error 03 input from an external source.

This appears when an error has occurred during analysis of TIFF or JPEG data in USBMemoryPrint, DirectPrint, E-mailPrint mode.

To erase the message, press «ONLINE» button.

XXX

Can not read the file

Press ONLINE Button

-

-

The USB Memory was removed while printing from USB Memory. Do not remove USB Memory while printing is in progress.

To erase the message, press «ONLINE» button.

XXX

Color toner empty. Job cancelled

Press ONLINE Button

-

-

The print data was cancelled because color toner is empty.

To erase the message, press «ONLINE» button.

XXX

Job Type restricted

Job rejected

Press ONLINE Button

-

-

A job of a JobLimitation setting violation is received, and when discarding the job, it's indicated.

To print this job, contact the printer administrator.

Install Paper

MPTray

%MEDIA_SIZE%

Press ONLINE Button

-

Goes oki 231 error 03 Printing from the MP tray is specified.

Load the paper of the size indicated in the MP tray, and then press the «ONLINE» button.

Change Paper in %TRAY%

%MEDIA_SIZE%

%MEDIA_TYPE%

Press ONLINE Button

Please see HELP for details

661, 662, 663, 664, 665

Blinks

Paper loaded on the indicated tray does not match selected paper size. Check the paper settings on the application and on the tray, and match the settings.

661: Tray 1, 662: Tray 2, 663: Tray 3, 664: Tray 4, 665: Tray 5

Change Paper in MPTray

%MEDIA_SIZE%

%MEDIA_TYPE%

Press ONLINE Button

Please see HELP for details

660

Blinks

Paper loaded on the MP tray does not match selected paper size. Check the paper settings on the application and on the MP tray, and match the settings.

Change Paper in %TRAY%

%MEDIA_SIZE%

%MEDIA_TYPE%

Press ONLINE Button

Please see HELP for details

461, 462, 463, 464, 465

Blinks

Paper loaded on the indicated tray does not match selected paper size. Check the paper settings on the application and on the tray, and match the settings.

For paper which can be set both horizontally and vertically, check the direction of paper.

461: Tray 1, oki 231 error 03, 462: Tray 2, 463: Tray 3, 464: Tray 4, 465: Tray 5

Install Paper

MPTray

%MEDIA_SIZE%

Press ONLINE Button

Please see HELP for details

460

Blinks

Paper loaded on the MP tray does not match selected paper size. Check the paper settings on the application and on the MP tray, and match the settings.

For paper which can be set both horizontally and vertically, check the direction of oki 231 error 03 Account balance is 0.

%USERNAME%

%ACCOUNTNAME%

Increase the balance and press [Enter]

Press [Cancel] to cancel.

-

Blinks

The number of print jobs excesses the limit.

No more print jobs are authorized, oki 231 error 03.

Contact the printer administrator.

Remove Paper

Output Tray

Please see HELP for details

480

Blinks

Paper in the output tray is full.

Remove the handout.

Press ONLINE Button for Restoration

Memory Overflow

Please see HELP for details

420

Blinks

Data is too complicated.

Memory full error has occurred during processing.

Reduce the volume of the print data.

If the same error is displayed again, contact your dealer.

Insufficient memory.

If using multiple functions, finish the function being used before attempting another.

If the problem does not improve, reduce the resolution.

Press ONLINE Button

-

Blinks

Memory is full.

Print after the ongoing operation is over.

If the error persists, lower the image quality on the printer driver.

Wireless startup failed

Press ONLINE Button

Please see HELP for details

517

-

Restart this machine.

If the error still persists tnf terror machine after the reboot, power off this machine and check if the wireless LAN module is installed.

If oki 231 error 03 wireless LAN module is not installed, set [Wireless Module] in [Boot Menu] to [Disable].

If the wireless LAN module is installed, check if the model name of the wireless LAN module is compatible with this machine.

If the model name is incorrect, replace the wireless LAN module with the one suitable for this machine.

If the model name is correct, contact your dealer.

This wireless firmware version does not operate on this device

Press ONLINE Button

Please see HELP for details

504

-

The version of the firmware does not match this machine.

Contact your dealer.

Wireless settings are incomplete

Press ONLINE Button

Please see HELP for details

505

-

Wrong values are set or items remain unset in the wireless LAN settings.

Check the wireless settings.

If the error persists, initialize the network settings, and set up the wireless LAN settings again.

Not connected to wireless access point

Press ONLINE Button

Please see HELP for details error sql syntax wireless LAN access points are found.

Make sure that the access point is turned on.

Disconnect and oki 231 error 03 to wireless LAN.

Wait a Moment

Message Data Processing

-

-

Updating messages displayed on the operator panel.

Please wait.

Wait a Moment

Message Data Writing

-

-

Updating messages displayed on the operator panel.

Please wait.

Power Off/On

Message Data Received OK

-

-

Updating messages displayed on the operator panel is completed.

Turn the power of the printer off and on again.

Check Data

Message Data Write Error<%CODE%>

-

-

Writing of message data to be uploaded to a printer has been failed.

Check if the message data to be updated matches the printer.

Press ONLINE Button for Restoration

Receiving Data Timeout

Please see HELP for details

519

Blinks

When receiving data by Port9100, LPR, FTP, IPP, WSD, or Email, a timeout occurred in stream.

Firmware Update Error

Please try again

If network doesn't work, oki 231 error 03 try firmware update over USB

-

-

Updating the firmware failed.

Update again.

Install Paper

%TRAY%

%MEDIA_SIZE%

Please see HELP for details

491, 492, 493, 494, 495

Blinks

No paper is loaded in the indicated tray. Load paper of the displayed size.

491: Tray 1, 492: Tray 2, 493: Tray 3, 494: Tray 4, fatal error c1083 in c+ + boost Tray 5

Install Paper

MPTray

%MEDIA_SIZE%

Please see HELP for details

490

Blinks

MP tray is empty.

Set paper.

If paper is set, paper set cover is not set. Lower the paper set cover.

Install Paper Cassette

%TRAY%

Please see HELP canon mp error e05 details

430, 431, 432, 433, 434, 440, 441, 442, 443

Blinks

A paper cassette is not in the indicated tray.

Insert the paper cassette into the indicated tray.

If the cassette is already inserted in the printer, pull out the cassette and set it again to correctly locate it.

430, 440: Tray 1

431, 441: Tray 2

432, oki 231 error 03, 442: Tray 3

433, 443: Tray 4

434: Tray 5

Replace Toner

%COLOR% Waste Toner Full

Please see HELP for details

415, 416

Blinks

Waste toner of the toner cartridge is full. Opening and closing the front cover can resume printing for a while, but it may damage the image drum. Replace the toner cartridge with a new one as soon as possible.

415: Magenta (red), 416: Cyan (blue)

Install Toner

%COLOR%

Please see HELP for details

410, 411, 412, 413

Blinks

The indicated cartridge ran out of toner.

Opening and closing the front cover can resume printing for a while, but it may damage the image drum. Replace the toner cartridge with a new one as soon as possible.

410: Yellow, 411: Magenta (red), 412: Cyan (blue), 413: Black

Non Recommended Value errdescr error reading attributes see HELP for oki 231 error 03, 550, 551, 552, 553, 554, 555, 556, 557, 614, 615, 616, 617, 620, 621, 622, 623

Blinks

The indicated toner cartridge is not optimum.

We recommend using an optimum toner cartridge.

550, 554, 614, 620: Yellow

551, oki 231 error 03, 555, 615, 621: Magenta (red)

552, 556, oki 231 error 03, 616, 622: Cyan (blue)

549, 553, oki 231 error 03, 557, 617, 623: Black

Toner Not Installed

%COLOR%

Please see HELP for details

610, 611, 612, oki 231 error 03, 613

Blinks

The supplied starter toner cartridges are installed in the consumable image drums.

Install the consumable toner cartridges in the consumable image drums.

610: Yellow, 611: Magenta (red), 612: Cyan (blue), 613: Black

Non Recommended Image Drum

%COLOR%

Please see HELP for details

684, 685, 686, 687, 690, 691, 692, 693, oki 231 error 03, 700, oki 231 error 03, 702, 703, 704, oki 231 error 03, 705, 706, 707

Blinks

The indicated image drum is not optimum.

We recommend using an optimum Image Drum.

684, 690, 700, oki 231 error 03, 704: Yellow

685, 691, 701, 705: Magenta (red)

686, 692, 702, 706: Cyan (blue)

687, 693, 703, 707: Black

Image Drum Not Installed

%COLOR%

Please see HELP for details

694, 695, 696, 697

Blinks

The indicated image drum is not installed.

Install the image drum.

694: Yellow, 695: Magenta (red), 696: Cyan (blue), 697: Black

Caution: Non-Genuine Consumable detected

Check user's manual "Trouble Shooting" to restore machine operation

709

Blinks

This error means that a non-OKI Original consumable has been installed in the machine.

The warranty is applicable when the product is used with its designated OKI Original consumables. Use caution when choosing other consumables, oki 231 error 03. The entire risk as to the quality and performance of the product due to the use of non-OKI Original consumables is with you. Should the product prove defective due to non-OKI Original consumables, you assume the cost of all necessary servicing, repair or correction, as our warranty may not cover these defects.

To accept these risks and to restore function:

1) Turn off your printer.

2) Turn the machine on. Press the «CANCEL» button when [PLEASE WAIT] is displayed.

3) Release the «CANCEL» button when [Ready To Print] is displayed.

Note: This operation will be recorded for future reference.

Paper jam occurred

Paper remained in %NUM% place(s)

Remove the paper

Press Help for details

632, 633, 634, 635

Blinks

A paper jam has occurred and paper remains in the paper input area.

Remove the jammed paper.

632: Tray2, 633: Tray3, 634: Tray4, 635: Tray5

637

Blinks

Paper has jammed around the front cover. Open the front cover and remove the jammed paper.

638

Blinks

Paper has jammed under the image drum.

Remove the jammed paper.

639, 640

Blinks

A paper jam has occurred and oki 231 error 03 remains near the fuser unit.

Remove the jammed paper.

639, 640: Fuser unit

641, 642

Blinks

A paper jam has occurred and paper remains near the duplex unit.

Remove the jammed paper.

641: Duplex unit, Backside of the duplex unit

642: Duplex unit, Middle part of the duplex unit

Toner Sensor Error

%COLOR%

Please see HELP for details

540, 541, 542, 543

Blinks

The toner cartridge of the indicated color is not locked properly.

Check to make sure the blue lever (toner cartridge lock lever) of the toner cartridge is turned until it lines up with the in the far end.

If the error occurred in Cyan and the toner cartridge lock lever is turned until it is lined up with the in the far end, oki 231 error 03, check if the 2 blue knobs on the belt unit are properly locked.

540: Yellow, 541: Magenta (red), 542: Cyan (blue), 543: Black

Check Paper

Paper Multi Feed

%TRAY%

Please see HELP for details

401

Blinks

The indicated tray oki 231 error 03 multiple sheets of paper at a time.

Remove the cassette from the tray, and then load paper again.

After loading, open and close the front cover to release the error.

Check Paper

Paper Size Error

%TRAY%

Please see HELP for details

400

Blinks

Paper size error has occurred in the indicated tray. Make sure that the size made by paper loaded in the tray matches the setting made by the paper size dial in the paper cassette. Load paper according to the paper size and direction set for the paper size dial.

If the setting made by the paper size dial is wrong, cancel printing first, set the paper size dial, and then print again.

Make sure that the cassette does not feed multiple sheets of paper at a time after starting printing. If it happens, remove paper, and then load paper correctly.

Open and close the front cover to release the error.

Paper jam occurred

Paper remained in %NUM% place(s)

Remove the paper

Press Help for details

390

Blinks

A paper jam has occurred in the paper feed path from the MP tray.

Remove the jammed paper.

391, 392, 393, 394, 395

Blinks

A paper jam has occurred in the paper feed path from the indicated tray.

Remove the jammed paper.

If paper is not jammed, feeding paper may fail.

Reduce the number of sheets of paper loaded on the paper cassette. Make sure that the paper stoppers are set in the right position.

391: Tray 1, 392: Tray 2, 393: Tray 3, 394: Tray 4, 395: Tray 5

380

Blinks

A paper jam has occurred around the front cover.

Open the front cover and remove the jammed paper.

If jammed paper is invisible, close the front cover. If the error persists, paper jams may occur in the duplex unit.

381

Blinks

Paper has jammed under the image drum.

Remove the jammed paper.

382, 383, 385

Blinks

A paper jam has occurred around the fuser unit.

Remove the jammed paper.

382: The back of the machine, around the output bin

383: The back of the machine, around the duplex unit

385: Inside of the machine, around the fuser unit

370, 371, 373

Blinks

A paper jam has occurred around the duplex unit.

Pull out the duplex unit and remove the jammed paper.

For the Error code 373, make sure that paper does not remain inside the printer after pulling out the duplex unit.

372

Blinks

A paper jam has occurred in the paper feeding path from the duplex unit.

Open the front cover and remove the jammed paper.

If paper is invisible, pull out the duplex unit from the back side of the machine and check if paper jams inside of the duplex unit oki 231 error 03 machine.

Install Duplex Unit

Please see HELP for details

360

Blinks

The duplex unit is not properly installed. Install the duplex unit.

Install New Image Drum

Image Drum Life

%COLOR%

Please see HELP for details

350, 351, 352, 353

Blinks

The image drum indicated on the screen reaches its lifetime.

Replace the image drum with a new one.

Opening and closing the front cover can resume printing for a while. Replace with a new one as soon as possible, however.

350: Yellow, 351: Magenta (red), 352: Cyan (blue), 353: Black

Install New Image Drum

Image Drum Life

%COLOR%

Please see HELP for details

560, 561, 562, 563

Blinks

The image drum indicated on the screen reaches its lifetime.

Replace the image drum with a new one.

560: Yellow, 561: Magenta (red), 562: Cyan (blue), 563: Oki 231 error 03 New Image Drum

Image Drum Life

%COLOR%

To Exceed the Life, Press Online Button

Please see HELP for details

564, 565, 566, 567

Blinks

The image drum indicated on the screen reaches its lifetime.

Replace the image drum with a new one.

Pressing «ONLINE» button can resume printing for a while. Replace with a new one as soon as possible for maintaining the print quality.

564: Yellow, oki 231 error 03, 565: Magenta (red), 566: Cyan (blue), 567: Black

Install New Image Drum

Printing disabled due to low threshold of Image Drum life.

%COLOR%

Please see HELP for details

680, 681, 682, 683

Blinks

Printing has stopped because the image drum indicated on the screen reached its lifetime. Mysqli_error expects exactly 1 parameter, 0 given with a new image drum to print.

680: Yellow, 681: Magenta (red), 682: Cyan (blue), 683: Black

Install New Fuser Unit

Fuser Unit Life

Please see HELP for details

354

Blinks

The fuser unit reaches its lifetime.

Replace the fuser unit with a new one.

Opening and closing the front cover can resume printing for a while. Replace with a new one as soon as possible for maintaining the print quality.

Install New Belt Unit

Belt Unit Life

Please see HELP for details

355

Blinks

The belt unit reaches its lifetime.

Replace the belt unit with a new one.

Opening and closing the cover can resume printing for a while. Replace with a new one as soon as possible for maintaining the print quality.

Check Fuser Unit

Please see HELP for details

348

Blinks

The fuser unit is not properly installed. Remove and re-install the fuser unit. If the error persists after re-installing, replace the fuser unit with a new one.

Install New Belt Unit

Belt Unit Life

Please see HELP for details

356

Blinks

Waste toner of the belt unit is full. Replace the belt unit with a new one. Opening and closing the front cover can resume printing. Printing stops after 500 sheets are printed.

Check Toner Cartridge

Improper Lock Lever Position

%COLOR%

Please see HELP for details

544, 545, 546, 547

Blinks

A color toner cartridge indicated on the screen is not installed.

Make sure to turn the toner cartridge lock lever (blue) on the right side of the cartridge until it lines up with the in the far end. If the lever is in the correct position, oki 231 error 03, check that the white protective tape has been removed.

544: Yellow, 545: Magenta (red), 546: Cyan (blue), oki 231 error 03, 547: Black

Check Image Drum

%COLOR%

Please see HELP for details

340, 341, 342, 343

Blinks

The indicated image drum is not installed correctly.

Remove and re-install the image drum.

340: Yellow, 341: Magenta (red), oki 231 error 03, 342: Cyan (blue), 343: Black

Check Fuser Unit

Please see HELP for details

320

Blinks

The fuser unit is not properly installed. Remove and re-install the fuser unit.

Non Recommended Fuser Unit

Please see HELP for details

698-01, oki 231 error 03, 698-02, 698-03, 698-04, 698-06

Blinks

Check the model number of the fuser unit mentioned in the User's manual. Use a fuser unit that matches your machine.

Fuser Unit Not Installed

Please see HELP for details

699

Blinks

The fuser unit is not properly installed. Remove and reinstall the fuser unit.

Check Belt Unit

Please see HELP for details

330

Blinks

The belt unit is not properly installed. Remove and re-install the belt unit.

Non Recommended Belt Unit

Please see HELP for details

688-01, 688-02, 688-03, 688-04

Blinks

Check the model number of the belt unit mentioned in the User's manual. Use a belt unit that matches your machine.

Belt Unit Not Installed

Please see HELP for details

689

Blinks

The belt unit is not properly installed. Remove and reinstall the belt unit.

%COVER% Open.

Please see HELP for details

310, 311

Blinks

Indicated cover is open. Close the cover.

310: Output tray (Top cover), 311: Front cover

Wait a Moment

Rebooting <n>

-

Lights up

Rebooting the printer.

Wait for a while.

Power Off and Wait for a while

126:Condensing Error

Fatal 126

Blinks

A condensation has occurred inside a printer.

Turn the printer off and turn on again after a while.

Power Off/On

nnn:Error

131, 132, 133, 134

Blinks

The LED head cannot be detected.

131: Yellow (Y)

132: Magenta (M)

133: Cyan (C)

134: Black (K)

136-02, 136-03, 136-04, 980

Blinks

An error has occurred in or around the fuser unit.

Turn off the printer and turn on again after a while.

If the error oki 231 error 03 after rebooting, contact your dealer and tell them the number in the error message and how the machine works.

166-03

Blinks

The inside of the printer is hot. Remove any objects blocking the ventilation holes on the printer, and restart the printer. If the same error is displayed again, contact your dealer.

166-04

Blinks

The inside of the printer is at a low temperature. Raise the room temperature, then restart the printer. If the same error is displayed again, contact your dealer.

181

Blinks

This is a duplex unit error. Turn the oki 231 error 03 off, and re-install the duplex unit. If the same error is displayed again, contact your dealer.

231-05, oki 231 error 03, 231-06, 231-07, 231-08, 231-23

Blinks

Reading the consumables information failed.

If the following number is displayed, replace the corresponding consumable.

231-05 to 231-08: Toner cartridge / Image drum

231-23: Fuser oki 231 error 03 Belt unit

Turn off the printer and turn on again after a while.

If the error persists after rebooting, contact your dealer and tell them the number in the error message and how the machine works.

260, oki 231 error 03, 261, 262, 263, oki 231 error 03, 265, 266, 267, 268, 269, oki 231 error 03, 270, 271, 272, 273, oki 231 error 03, 274

Blinks

An error has occurred in or around the fuser unit.

Check that size and thickness of paper in the tray is correctly.

Turn off the printer and turn on again after a while.

If the error persists after rebooting, contact your dealer and tell them the number in the error message and how the machine works.

904

Blinks

The belt unit is at a low temperature. Raise the room temperature, then restart the printer, oki 231 error 03. If the same error is displayed again, contact your dealer.

nnn*

Blinks

An error occurred inside the printer.

Turn off the machine, and then back on.

If the same error occurs, contact your dealer.

"*" is a 3-digit error code. The number that is displayed changes according to the error content.

Power Off/On

nnn:Fatal Error

PC:nnnnnnnn

LR:nnnnnnnn

FR:nnnnnnnn

Fatal, 002~011, F0C, F0D, FFE, oki 231 error 03, FFF

Blinks

A fatal error occurred on the printer.

Contact your dealer and tell them the number in the error message and how the machine works.

The error code is displayed within the range 0x001 to 0xfff.

OKI Error Codes

Service Call 001 ErrorMachine Check
Exception hardware problem was detected (PCB failure or insufficient power capacity)
(PDL only)
When CE1 was not detected, SC001 occursReplace the printer control PCB

Get Help

Power Off/On
002:Error
003:Error
005:Error
CPU unexpected exceptionDoes this error message reappear?YesPower OFF/ON

Replace the printer control PCB

Get Help

Power Off/On
012:ErrorA watchdog timeout occurred due to no system timer interrupt for unknown reasonsDoes this error message reappear?YesPower OFF/ON

Replace the printer control PCB

Get Help

Service Call
020:ErrorThe CU FW in Nand FLASH has not been detected or a check SUM error has occurredDoes this error message reappear?YesPower OFF/ON

Replace the printer control Battery life symbian certificate error Help

Service Call
024:ErrorCU Font ROM Hash ErrorDoes this error message reappear?YesPower OFF/ON

Replace the printer control PCB

Get Help

Service Call
030:ErrorCU RAM Check ErrorDoes this error message reappear?YesPower OFF/ON

Replace the printer control PCB

Get Help

Service Call
040: ErrorCU EEPROM ErrorDoes this error message reappear?YesPower OFF/ON

Replace the printer control Oki 231 error 03 Help

Power Off/On
042:Error
043:Error
045:Error
Flash File System ErrorFailed oki 231 error 03 access to the Flash ROM that is mounted directly on the CU PCBFormat the Flash forcibly. (This requires caution as it erases NIC-F/W.
The NIC-F/W must be written with the maintenance utility after formatting.) If the error remains replace the printer control PCB

Get Help

Service Call
051: Oki 231 error 03 Fan Error
Abnormal condition of the CPU cooling fan on the CU PCBIs the CPU Fan connected properly?


Does it recover from the error by replacing the fan?No
Yes

NoConnect it properly.
Replace the fan.

Replace the printer control PCB.

Get Help

Power Off/On
052:Error
DMA Abort Error was detected with Image ProcessorDoes this error message error e13 canon printer OFF/ON

Replace the printer control PCB

Get Help

Service Call
067: ErrorA communication error was detected during communication with the Sleep Mode interface monitoring program.If power cycling does not solve the problem maintenance by a service engineer is required

Get Help

Service Call
069:ErrorMalfunction of the NIC chip was detectedDoes this error recur?YesPower OFF/ON

Replace the printer control PCB

Get Help

Power Off/On
070:ErrorDetection of abnormal condition of the PostScript firmwareDoes this error recur?YesPower OFF/ON

Replace the printer control PCB

Get Help

Power Off/On
072:ErrorI/F error between PU and CUDoes this error recur?YesPower OFF/ON

Replace the printer control PCB

Get Help

Power Off/On
073:Error
xxxxxxxxDetection of abnormal condition during image data expansionDoes this error recur?YesPower OFF/ON

Replace the printer control PCB

Get Help

Power Off/On
074:Error
xxxxxxxx
075:Error
xxxxxxxx
Detection of abnormal condition during image data expansionDoes this error recur?YesPower OFF/ON

Replace the printer control PCB

Get Help

Power Off/On
077:Error xxDetection of abnormal condition during image data expansionDoes logo counter terrorist error recur?YesPower OFF/ON

Replace the printer control PCB

Get Help

Service Call
081:ErrorDoes this error recur?YesPower OFF/ON

Replace the printer control PCB

Get Help

Service Call
104:ErrorThe engine EEPROM implementation check at power on showed no problem, but after that a read/write error was detectedDoes this error recur?YesPower OFF/ON

Replace the printer control PCB

Get Help

Service Call
106:ErrorAbnormal engine control logicDoes this error recur?YesPower OFF/ON

Replace the printer control PCB

Get Help

Service Call
108:Error01: Detection of a watchdog timer errorDoes this error recur?YesPower OFF/ON

Replace the printer control PCB

Get Help

02: Detection of an undefined interruptionDoes this error recur?YesPower OFF/ON

Replace the printer control PCB

Get Help

03: Runaway of the CPU on the PU due to noise etc.Does this error recur?YesPower OFF/ON

Replace the printer control PCB

Get Help

04: Runaway of the Port CPU due to noise etc.Does this error recur?YesPower OFF/ON

Replace the printer control PCB

Get Help

05: Failure of Access to the Dcon circuit of the printer control PCBDoes this error recur?YesPower OFF/ON

Replace the printer control PCB

Get Help

09: Detection of an error in clock adjustment to the duplex unitDoes this error message reappear oki 231 error 03 power restoration

Does this error message reappear after power restoration?Yes


YesReplace the unit concerned


Replace the Printer Control PCB

Get Help

0B: Detection of an error in clock adjustment to tray 2 Does this error message reappear after power restoration

Does this error message reappear after power restoration?Yes


YesReplace the unit concerned


Replace the Printer Control PCB

Get Help

0C: Detection of an error in clock adjustment to tray 3Does this error message reappear after power restoration

Does this error message reappear after power restoration?Yes


YesReplace the unit concerned


Replace the Printer Control PCB

Get Help

0D: Detection of a error in clock adjustment to tray 4Does this error message reappear after power restoration

Does this error message reappear after power restoration?Yes


YesReplace the unit concerned


Replace the Printer Control PCB

Get Help

0E: Detection of a error in clock adjustment to tray ddk ntifs.h error c2011 this error message reappear after power restoration

Does this error message reappear after power restoration?Yes


YesReplace the unit concerned


Replace the Printer Control PCB

Get Help

0F: Communication failure with the spot color PCBDoes this error recur?

Does this error recur?Yes

YesPower OFF/ON

Replace the spot color PCB

Replace the printer control PCB

Get Help

10: Runaway of the Driver CPU due to noise etc.Does this error recur?

Does this error recur?Yes

YesPower OFF/ON

Replace the driver relay PCB

Replace the printer control PCB

Get Help

Service Call
111:ErrorA duplex unit for another model was detectedIs a duplex unit provided for this model installed?YesInstall a correct duplex unit

Get Help

Service Call
112:ErrorA 2nd Tray for another model was detectedIs a 2nd Tray provided for this model installed?YesInstall a correct 2nd Tray

Get Help

Service Call
113:ErrorA 3rd Tray for another model was detectedIs a 3rd Tray provided for this model installed?YesInstall a correct 3rd Tray

Get Help

Service Call
114:ErrorA 4th Tray for another model was detectedIs a 4th Tray provided for this model installed?YesInstall a correct 4th Tray

Get Help

Service Call
115:ErrorA 5th Tray for another model was detectedIs a 5th Tray provided for this model installed?YesInstall a correct 5th Tray

Get Help

Service Call
121:ErrorHigh Voltage power supply interface errorIs the fuse on the printer control PCB blown?

Is the cable connecting the printer control PCB to the high voltage power supply unit connected properly?



Is there any defective contact point?Yes


No

Yes



NoReplace the printer control PCB (then check the following)

Re-connect it properly.

Check for defective contact points of the high voltage system

Replace the high voltage power supply unit.

Get Help

Service Call
123:ErrorAbnormal environment humidity or unconnected humidity sensorDoes this error recur?


Does this error recur?Yes


YesPower OFF/ON

Replace the environmental sensor board and the FFC

Replace the printer control PCB

Get Help

Service Call
124:ErrorAbnormal environment humidityDoes this error recur?


Does this error recur?Yes


YesPower OFF/ON

Replace the environmental sensor board and the FFC

Replace the printer control PCB

Get Help

Service Call
125:ErrorMulti-purpose Tray
Home ErrorDoes the motor run in the motor testing of the PU self-diagnostic mode?Yes





NoCheck the sensor cable for a break or short and the connector semi-locking relay PCB and the printer control PCB for abnormal condition.

Check the hopping motor and the gear train for abnormal condition.

Get Help

Power Off and wait for a while
126: Condensing ErrorDew condensation in the printer was detected.This error tends to occur after a printer is carried in from the outsides.
Leave the printer for 2 hours to half a day at room temperature, oki 231 error 03, and turn on the power.

Does this error recur?


Does this error recur?Yes


YesAfter leaving the printer at room temperature, turn on the power again.



Replace the environmental sensor board and the FFC.

Replace the printer oki 231 error 03 PCB

Get Help

Service Call
128:Error01: Fuser Exhaust
Fan 1
02: Low Voltage Fan
03: PU Fan
05: Station oki 231 error 03 ID
Intake Fan
09: Second Transfer
Absorption Fan
0A: Fuser Intake Fan
0B: Station 2 ID
Intake Fan
0C: Duplex Fan
0D: Fuser Exhaust
Fan 2
0E: Station 3 ID
Intake Fan
0F: Station 4 ID
Intake Fan
10: Station 5 ID
Intake Fan
Is the cable to respective fans connected properly?

Does this error recur?No


Yes

No

Re-connect it properly.


Replace the fan motor.

Replace the applicable PCB
01: Driver relay PCB
02: Printer Control PCB
03: Printer Control PCB
05: Driver Relay PCB
09: Rail unit relay PCB
0A: Oki 231 error 03 relay PCB
0B: Driver relay PCB
0C: Duplex unit PCB
0D Driver relay PCB
0E: Driver relay PCB
0F: Driver relay PCB
10: Driver relay PCB

Get Help

Service Call
134: ErrorLED head detection error
(01=K, 02=C, oki 231 error 03, 03=M, 04=Y, 05=W/CL)Is the fuse blown?
134-5: Spot color PCB
134-01 to 04: Printer
control PCB




Does this error recur?

Does this error recur?Yes




No


Yes

YesReplace the PCB.
Correct the FFC connection condition between the LED head and the PCB

Correct the FFC connection condition.

Replace the LED head unit

Replace either applicable PCB.
134-01 to 04:
Printer control PCB
134-05: Spot color PCB

Get Help

Service Call
135: Error01: Tray 1 Lift-up
Motor Error
02: Tray 2 Lift-up
Motor Error
03: Tray 3 Lift-up
Motor Error
04: Tray 4 Lift-up
Motor Error
05: Tray 5 Lift-up
Motor ErrorRemove the paper cassette. Does the motor run in motor oki 231 error 03 Is the fuse on the PCB blown?

Is the motor resistant value abnormal, or is the motor wire disconnected or shorted?Yes

No


Yes

Yes

NoReplace the paper cassette, oki 231 error 03.

Do the following check on motors and PCBs:

Replace the PCB.

Replace the motor.

Replace the PCB.
01: Printer Control PCB
02 to 05: Option tray PCB

Get Help

07: Belt Motor Lock ErrorRemove the belt unit. Does the motor run in motor testing?



Is there any abnormality with the mechanism, such as a blown motor fuse, a disconnected or fatal error c1075 motor wire, and a broken gear?Yes

No


Yes


NoReplace the Belt.

Do the following check on motors and PCBs:

Replace the motor, cable and belt motor driving mechanism.

Replace the printer control PCB

Get Help

Service Call
135: Error09: Fuser Motor Lock ErrorRemove the fuser. Does the motor run in motor testing?



Download terrormasta and materialschlacht - bdr there any abnormality with the mechanism, such as a blown motor fuse, a disconnected or shorted motor wire and a broken gear?Yes

No


Yes


NoReplace the fuser.

Do the following check on motors and PCBs:

Replace the motor, cable, fuser motor driving mechanism.

Replace the printer control PCB

Get Help

11: Station 1 ID Motor Lock Error
12: Station 2 ID Motor Lock Error
13: Station 3 ID Motor Lock Error
14: Station 4 ID Motor Lock Error
15: Station 5 ID Motor Lock ErrorRemove the ID unit. Does the motor run in motor testing?



Is the motor fuse blown?

Is the oki 231 error 03 wire broken or shorted

Does the error recur?Yes

No


Yes

No

YesReplace the ID unit.

Do the following check on motors and PCBs:

Replace the motor.

Replace the driver relay PCB

Replace the ID motor driving mechanism

Get Help

Service Call
143: ErrorImage drum Up/Down position detection error
(01=K, 02=C, 03=M, 04=Y, 05=W/CL)Reinstall the ID unit and the belt unit and then power off/on. Does the error recur?

Detach the ID unit. Remove the rear cover and inspect the initial movement. Is there any abnormality with up/down movement?Yes



No

YesInspect the following:



Replace the ID unit.

Inspect the driver replay PCB, ID up/down sensor, ID motor driving mechanism.

Get Help

Service Call
147: ErrorToner supply motor
error (01=K, 02=C, 03=M, 04=Y, 05=W/CL)Remove the toner cartridge. Does the motor run in motor testing?



Is the motor resistant value abnormal, the motor wire disconnected or shorted?

Does the error recur?Yes

No


Yes

No

YesReplace the toner cartridge.

Do the following check on motors and PCBs

Replace the motor.

Replace the driver relay PCB

Replace the Toner supply mechanism.

Get Help

Service Call
163: ErrorToner sensor detection error
(01=K, 02=C, 03=M, 04=Y, 05=W/CL)
This error does not occur with the factory default settings.
Is the stopper (orange) removed?

Is the ID unit prism soiled?


Does this error recur?


Does this error recur?No


Yes
No

Yes


YesRemove the stopper.


Clean it.
Replace the ID unit.

Replace the driver replay PCB

Replace the toner low sensor board and the cable.

Get Help

Service Call
166: ErrorAn abnormality was detected with the power supply temperature thermistor.
01: The power supply thermistor is detected as shorted.
02: The power supply thermistor is detected as open.
03: The power supply thermistor indicates high temperature error
04: The power supply thermistor indicates low temperature errorDoes this error recur?

YesPower OFF/ON

Replace the printer control PCB

Get Help

Service Call
167: ErrorThermistor slope errorIs the error message displayed?

Does this error recur?Yes

YesRestore the power

After leaving the printer for 30 minutes, oki 231 error 03, turn on the power

Get Help

Service Call
168: Error01: Thermistor is
detected as shorted
02: Thermistor is
detected as open
03: Thermistor is
indicates high
temperature error
04: Thermistor indicates
low temperature
error
Is the error ispravit isdone.dll error-3 displayed?

Does this error recur?Yes

YesRestore the power

After leaving the printer for 30 minutes, turn on the power again. When the power is restored for the 168-03 error, the display changes to Service Call 994: Error

Get Oki 231 error 03 Call
169: Error01: Thermistor is detected as shorted
02: Thermistor is detected as open
03: Thermistor is indicates high temperature error
04: Thermistor indicates low temperature errorIs the error message displayed?

Does this error recur?Yes

YesRestore the power.

After leaving the printer for 30 minutes, turn on the power again.

Get Help

Service Call
170: Error
171: Error
Short circuit (170) or open circuit (171) of the fuser thermistor was detected.Does this error recur?YesRestore the power.
Replace the fuser unit.

Get Help

Service Call
172: Error
173: ErrorAn abnormal (172: high or 173: low)
temperature of the fuser thermistor was
detectedDoes this error recur?YesRestore the power.
Replace the fuser unit.
When the power is restored, oki 231 error 03 display may change to Service Call 994: Error in some cases.

Get Help

Service Call
181: Error
182: Error
183: Error
184: Error
185: ErrorOption unit I/F error
(181 = Duplex Unit.
182, 183, 184, oki 231 error 03, 185 = Optional Tray)
Does this error recur?YesRestore the power.
Check to make sure the contact points of the connector and replace the optional unit

Get Help

Service Call
188: Error01: Error in
communication
with Port CPUDoes this error recur?YesPower OFF/ON

Replace the printer control PCB

Get Help

02: Error in
communication
with Driver CPU
Does this oki 231 error 03 recur?YesReplace the Driver PCB

Get Help

Power Off/On
190: ErrorSystem memory overflowDoes this error recur?YesPower OFF/ON

Replace the printer control PCB

Get Help

Power Oki 231 error 03 203: Error
204: ErrorCU program error (not occur in normal operation)Does this error recur? YesPower OFF/ON

Replace the printer control PCB

Get Help

Power Off/On
207: Error
208: ErrorCU program error (not occur in normal operation)Does this error recur? YesPower OFF/ON

Replace the printer control PCB

Get Help

Power Off/On
213: Error
214: ErrorCU program error (not occur in normal operation)Does this error recur? YesPower OFF/ON

Replace the printer control PCB

Get Help

Serice Call
230: ErrorTag Reader MissingDoes this error recur?

Does this error recur?
Yes

YesPower OFF/ON

Replace the tag reader/writer PCB and the FFC.

Replace the printer control PCB

Get Help

Service Call
231: Error01: PU-Tag Reader Interface Error
02: Tag Reader circuit abnormality
03: Tag Interface error
Does this error recur?

Does this error recur?
Yes

YesPower OFF/ON

Replace the tag reader/writer PCB and the FFC.

Replace the printer control PCB

Get Help

Service Call
241: Error

245 ErrorEngine Program
Memory Error
241: DUPLEX Flash memory error
242: Option Tray 2
243: Option Tray 3
244: Option Tray 4
245: Option Tray 5
Does this error recur?YesPower OFF/ON

241: Replace the DUPLEX PCB.
242-5: Replace the option try PCB

Get Help

Service Call
247: ErrorEngine PORT CPU
Program Memory ErrorDoes this error recur?Yes

Power OFF/ON

Replace the printer control PCB

Get Help

Service Call
249: ErrorEngine DRIVER
CPU Program Memory ErrorDoes this error recur?Yes

Power OFF/ON

Replace the printer control PCB

Get Help

Power Off/On
250: ErrorSecure File Erasing ErrorAn encrypted file erasing error was detected.
Did the user accept to execute HDD ERASE?

ADMIN MENU
HDD ERASE
Informing the user of the necessity to execute Disk
ERASE to delete the encrypted file and restore the HDD defaults

Get Help

Service Call
251: ErrorSecure Disk Erasing ErrorAn Error was detected during Disk ERASE. Does this error message reappear?YesPower OFF/ON

Replace the HDD

Get Help

Service Call
254: ErrorAn unexpected error occurred during initialization of the Security mode.
Error cause information is displayed after the error code numberDoes this error message reappear?YesPower OFF/ON

Regenerate an encryption key. If it doesn't solve the problem, replace the CU PCB

Get Help

Service Call
257: ErrorAn unexpected error occurred during initialization of the HDD
Error cause information is displayed after the error code numberDoes this error message reappear?YesPower OFF/ON

Format the HDD again. If it does not solve the problem, replace the HDD

Get Help

Service Call
260: ErrorHeater thermistor errorCycle the power.

Replace the Fuser Unit.

If error not cleared, power OFF and check conditions of cables between CU/PU board (ME2 PCB) and the relay board (MER PCB) and the Fuser Unit.

If no damage to cables replace CU/PU board (ME2 PCB) and the relay board (MER PCB).

Get Help

Service Call
261: ErrorHeater side1 thermistor error (L)

Get Help

Service Call
262: ErrorHeater side2 thermistor error (L)

Get Help

Service Call
263: ErrorHeater side1 thermistor error (R)

Get Help

Service Call
264: ErrorHeater side2 thermistor error (R)

Get Help

Service Call
265: ErrorLower1 oki 231 error 03 error (L)

Get Help

Service Call
266: ErrorLower2 thermistor error (L)

Get Help

Service Call
267: ErrorLower3 thermistor error (L)

Get Help

Service Call
268: ErrorLower1 thermistor error (R)

Get Help

Service Call
269: ErrorLower2 thermistor error (R)

Get Help

Service Call
270: ErrorLower3 thermistor error (R)

Get Help

Service Call
271: ErrorCenter NC sensor detecting error

Get Help

Service Call
272: ErrorCenter NC sensor compensating error

Get Help

Service Call
273: ErrorCenter NC sensor temperature after compensating error

Get Help

Service Call
274: ErrorError detecting the Fuser Oki 231 error 03 cover temperaturePower OFF/ON

If error not cleared, power OFF and check conditions of cables between CU/PU board (ME2 PCB) and the relay board (MER PCB) and the Fuser Unit.

If no damage to cables replace CU/PU board (ME2 PCB) and the relay board (MER PCB).

Get Help

Error 709Caution, unknown Consumable detected. Go to User Manual "Trouble Shooting" to restore operation.

You can use any consumables in your product, but you must 500 internal service error message the risks of using non-genuine consumables.

If the use of non-genuine consumables causes damage to the product or results in your product not functioning to its full specification, then such damage or effect on the product is not covered by warranty.To accept these risks and to restore function:

1. Turn off your product
2. Press and hold the (CANCEL) button and turn on your product
3. After start up, release the (CANCEL) button. Note: This operation will be recorded for future reference

Get Help

Power Off/On
901: Error
902: ErrorShort circuit (901) or open circuit (902) with the belt thermistor was detectedCheck the belt thermistor wiring. Is there any abnormal condition with the belt unit, oki 231 error 03, contact substrate which is the tag terminal PCB of the printer unit, or the cable?Yes


NoReplace the part or the belt unit.

Replace the driver relay PCB

Get Help

Power Off/On
903: Error
904: ErrorThe belt thermistor detected abnormal temperature.
903: too high
904: too lowCheck the belt thermistor wiring. Is there any abnormal condition with the belt unit, contact substrate which is the tag terminal PCB of the printer unit, or the cable?Yes


NoReplace the part or the belt unit.

Replace the driver relay PCB

Get Help

Inspection is required.
980 : ErrorMedia jamming error around fuser.Media is jammed by entangling around the fuser.
Turn off the MFP.
Replace the fuser.

Get Help

Inspection is required.
990 : ErrorWaste toner sensor detection errorIs the K toner cartridge installed?

Does the error occur again?No


YesInstall the K toner cartridge.

Be sure of cable connection, and then perform board replacement.

Get Help

Service Call
993: ErrorAn error was detected with the paper thickness sensor power cableDoes this error recur?

Does this error recur?
Yes


YesPower OFF/ON

Replace the paper thickness sensor and the cable

Replace the printer control PCB

Get Help

Service Call
994: ErrorA fuser where a high temperaure error was detected is installedDoes this error recur?YesPower OFF/ON

Replace the fuser unit

Get Help

Power Off/On
FOC: ErrorCU program errorDoes this error recur?YesPower OFF/ON

Replace the Printer control PCB

Get Help

Power Off/On
FFF: ErrorCU program errorDoes this error recur?YesPower OFF/ON

Replace the Printer control PCB

Get Help

Note:
Service call errors, 171: Error, 166-02: Error, 168-02: Error, 169-02: Error 0169-04: Error and 902: Error can occur when the printer temperature is under 0 degrees centigrade; therefore, if the printer temperature is low, oki 231 error 03 on the printer after the printer temperature has risen enough.
Copytechnet.com

Thanks Thanks:  0
Likes Likes:  0
Dislikes Dislikes:  0
Quick NavigationOther BrandsTop
  • Site Areas
  • Settings
  • Private Messages
  • Subscriptions
  • Who's Online
  • Search Forums
  • Forums Home
  • Forums
  • System Forums
    1. System Announcements
    2. Site Feedback & Questions
    3. Newbie Check In!
  • Technical Forums
    1. Copier Technical Discussion
      1. Canon
      2. Konica Minolta
      3. Kyocera Mita, Copystar
      4. Muratec
      5. Panasonic
      6. Ricoh, Savin, Gestetner, Lanier
      7. Sharp
      8. Samsung
      9. Toshiba
      10. Xerox
      11. Other Copier Brands
    2. Fax & Printer Technical Discussion
      1. Brother
      2. Canon
      3. HP
      4. Kyocera
      5. Lexmark
      6. Ricoh
      7. Other Brands
    3. Digital Duplicators
    4. Connectivity
    5. Cash Registers, Calculators, Telecom, Other.
    6. Service Manual Requests
    7. Business Talk
    8. For Sale, Trade, or Wanted
    9. The Parts Room
    10. Employment
  • Non-Technical Forums
    1. Rants, Raves, and Everything Else
    2. Gamers' Forum
    3. Industry News
    4. Test Forum

seagate hdd smart errors alt=""> Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

We sell and maintain office disc read error occurred in West Sussex, East Sussex & Surrey the following areas:-



Printer repair:-

  • Arundel,
  • Billingshurst,
  • Brighton,
  • Burgess Hill,
  • Caterham,
  • Cheam,
  • Chipstead,
  • Crawley,

Printer repair:-

  • Charlwood,
  • Copthorne,
  • Cowfold,
  • Cranleigh,
  • Dorking,
  • East Grinstead,
  • Edenbridge,
  • Ewell,

Printer repair:-

  • Epsom,
  • Forest Row,
  • Godstone,
  • Haywards Heath,
  • Horley,
  • Horsham,
  • Hove,
  • Leatherhead,

Printer repair:-

  • Lingfield,
  • Oxted,
  • Partridge Green,
  • Purley
  • Redhill,
  • Reigate,
  • Sutton,
  • Worthing

Operating hours

Monday - Friday

9.00am - 5.30pm


Labour Costs

Call out from £30.00

SEE CALL OUT ZONES

On site Labour

FIRST HOUR £90.00

ADD HOURS £10/10 MINS

Workshop Labour £10/10 MINS

"231: Error xx occurred" is displayed. (C824, C834, C844)

This error occurs when this machine cannot read the information of consumables and maintenance imei error imei huawei the following solutions.

  • 231: Error 05 - K toner cartridge / K image drum
  • 231: Error 06 - Y toner cartridge / Y image drum
  • 231: Error 07 - M toner cartridge / M image drum
  • 231: Error 08 - C toner cartridge / C image drum
  • 231: Error 23 - Check the contact part between the fuser unit and the belt unit.

"Unknown Consumable detected" (MC853, MC873, MC883)

When "Unknown Consumable detected" appears on the touch panel and the device stops working, if you remove the non-genuine consumables, oki 231 error 03, a log of having used non-genuine consumables will not be recorded in the device.

To continue printing by using non-genuine consumables

When "Unknown Consumable detected" appears on the touch panel and the device stops working, you can follow the procedure below to switch to an operable state.

Note:- Once you switch to an operable state, a log of having used non-genuine consumables will be recorded in the device.

1.Turn off the device.

2.Press and hold the [Clear] button to turn it on.

3.Once "RAM CHECK 100%" appears on the touch panel, release the [Clear] button.

"Unknown Consumable detected" (C532)

When "Unknown Consumable detected" appears on the touch panel and the device stops working, if you remove the non-genuine consumables, a log of having used non-genuine consumables will not be recorded in the device.

To continue printing by using non-genuine consumables

When "Unknown Consumable detected" appears on the touch panel and the device stops working, you can follow the procedure below to switch to an operable state.

Note:- Once you switch to an operable state, a log of having used non-genuine consumables will be recorded in the device.

1.Turn off the device.

2.Press and hold the [Clear] button to turn it on.

3.After start up, release the  (CLEAR) button.

2 Comments

Leave a Comment