Hardware monitor error asus

hardware monitor error asus

Plug the VGA cable from the monitor into the VGA port on the motherboard. Motherboard: Asus Z77 CPU: Intel I7 3.8 GPU: GTX 970ti RAM: 24 GBs. The simplest cause of an “out of range” error is a new video card plugged into an old monitor. Newer video cards can handle resolutions that older monitors can'. Hey Yuvraj, Is it 6d or bd? This might point to insufficient system voltage. Check all of your power cables. To the CPU (1x or 2x 8.

youtube video

CPU Over Temperature Error ASUS COMMON ISSUE

Hardware monitor error asus - certainly not

Just got a Asus P3B-F 440BX motherboard from a seller on Ebay. When I boot it up, I get a Hardware Monitor Error. I go into the BIOS and I see a red text for -5V (says it's actually -6.14v).

I'm using a new Corsair CX750M. I tried a different PSU (another CX750M) - same thing.

After some Googling, this guy seems to have the same problem, but was told to just ignore it. That doesn't seem right...
http://www.pcreview.co.uk/threads/p3b-f-bios- … -error.3831759/

Anyone else seen this issue before?

Edit - more details: I got this with the original bios (1004). I also updated to the newest "beta" firmware (1008f). Same thing on both.

Edit - more Googling and I found this:
http://forums.anandtech.com/showthread.php?t=21443

Seems that modern PSUs no longer have a -5V rail, so the hardware monitor freaks out and just displays -6.14v when it's actually floating. I confirmed by looking at the specs of my PSUs.

I'm still not feeling all that good about it. I wonder if I should look for an older PSU. Dang... that sounds like a bad idea as soon as I said it...

It is annoying the motherboard just hangs there until you hit F1 to continue though.

How to Fix a CPU Fan Error

The Central Processing Unit (CPU) fan error is a common error message that can appear when starting up a Windows desktop computer or laptop. The warning is usually triggered after a computer has shut itself down due to overheating. It may happen when the fan (or fans) cannot cool the hardware sufficiently.

While frustrating, the CPU error message and the forced shutdown indicate the computer's safeguards are working correctly. If the fans aren't working and the computer continues to overheat, it can permanently damage hardware components.

There are ways to confirm the cause of overheating and the resulting error messages, as well as ways to fix them.

How the CPU Fan Error Appears

The CPU fan error commonly appears during a Windows PC's bootup or start-up process; it does not appear during regular Windows operation. The error message text usually appears as one of the following:

  • "Error: CPU Fan Has Failed!"
  • "CPU Fan Error"

What Causes CPU Fan Errors?

A CPU fan error on start-up is typically due to physical damage to the fan, incorrect settings, or external factors causing the computer to overheat and force the fan to run at unusually high speeds. Dust or other objects obstructing the device's air vents can cause CPU fan errors.

How to Fix a CPU Fan Error

Because hardware and software problems can cause CPU fan errors, fixes are equally varied and involve checking specific settings and the internal CPU fan.

Follow these tips to avoid CPU overheating and error messages.

  1. Move your computer. Leaving your computer in an area with a lot of heat or sunlight can cause it to overheat and shut down, no matter how hard the fan is working. Try moving your computer to a cooler room and never place it in direct sunlight throughout the day.

  2. Stop overclocking. A consequence of overclocking is a dramatic increase in system heat that the default fans can't manage. Overheating can damage circuits and cause frequent shutdowns and overheating errors.

  3. Keep your computer cool. The easiest way to clean the air vents is to remove the brush from your vacuum cleaner, then use it at full power to suck any dust and debris out. Alternatively, use an airgun or canned air to blast the dust out.

  4. Clean the CPU fans. For this step, you'll need to turn your computer off, unplug it from the power source, and open up the case. Once opened, you can clean the interior and remove dust with an air gun or canned air.

    Refrain from spraying any cleaning agents onto any parts, as this can seriously damage various components.

    Many devices, such as the Microsoft Surface line of products, are not designed to be opened, and doing so may void the warranty or cause permanent damage. Reference your device's official support manual or call customer service if you're unsure.

  5. Check your CPU fan. While you have your computer opened, physically check your device's fans to make sure they haven't loosened or fallen out of place. Depending on your fan model, you should be able to fasten your fans back into place with a screwdriver or glue.

    Whenever you're checking anything in the interior of an electrical device, make sure that it is completely turned off and disconnected from all power sources. Remember to choose Shut Down, not Sleep, when turning your computer off.

  6. Check your CPU fan's location. If you've installed the CPU fan yourself, ensure it's in the correct place. You should have connected it to the CPU header on the motherboard. If you've connected it elsewhere, the fan may run when the computer is on, but it won't sufficiently cool the CPU, which is its primary purpose.

    The CPU header will likely be labeled "CPU Fan," but if it isn't, it's still easy to spot with its three holes for the fan's three-pronged plug.

  7. Try an alternate CPU fan header. If you have multiple CPU fan headers on your motherboard, try plugging the fan into a different slot. Doing this sometimes fixes the CPU fan error.

  8. Check the CPU fan's settings in BIOS. You can use it to troubleshoot tech issues and make sure everything is as it should be.

    Open BIOS, then select Advanced Settings > Hardware Monitor > CPU Fan. Enable Active Heat Sink and Fan Duct with Fan and disable Passive Heat Sink and Fan Duct without Fan. Save your changes and exit BIOS.

    You'll often be prompted to press F1 when you get the initial CPU error message. Pressing F1 when this message is visible will also open BIOS.

  9. Change the BIOS setting. If you can see your CPU fan working correctly and you're sure your computer isn't overheating or running too hot, this change to the BIOS setting in step No. 8 can bypass the CPU fan error message and get your device up and running.

    To do this, open BIOS and select Monitor > Fan SpeedMonitor > N/A > Ignore > Exit > Save Changes.

    This setting can affect your computer's ability to detect CPU fans and cause overheating problems in the future. We only recommend it if you are sure that your CPU fan is working and you can test your laptop's temperature.

  10. Replace the CPU fan. If none of the above works, your fan could be broken and need replacing. Your computer's warranty may cover the repair of the fan. If you purchased the fan separately, it might have a separate warranty you can use to get a free or discounted replacement part.

    The 8 Best Laptop Cooling Pads of 2022

FAQ

  • To fix a loud computer fan, start by cleaning the fans, check the Task Manager for programs that consume a lot of CPU, and take steps to keep your computer from getting hot.

  • You can control your CPU fan speed using software from the manufacturer or your PC's BIOS. Never set the fan speed to '0' as this may cause your CPU to overheat.

  • If the fan is working but you get an error, there could be an issue with the fan, or your computer hasn't registered that the error is fixed.

Thanks for letting us know!

4. BIOS SETUP

4.5.2 Hardware Monitor

MB Temperature, CPU Temperature [xxxC/xxxF]

The onboard hardware monitor is able to detect the MB (motherboard) and

CPU temperatures (for supported processors only). Set to [Ignore] only if

necessary.

Chassis Fan, CPU Fan, Power Fan Speed [xxxxRPM]

The onboard hardware monitor is able to detect the CPU fan speed, power

supply fan speed, and the chassis fan speed in rotations per minute (RPM).

The presence of the fans is automatically detected. Set to [Ignore] only if

necessary.

VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage, -12V

Voltage, -5V Voltage [xx.xV]

The onboard hardware monitor is able to detect the voltage output by the

onboard voltage regulators. Set to [Ignore] only if necessary.

NOTE: If any of the monitored items is out of range, an error message will

appear: "Hardware Monitor found an error. Enter Power setup menu for

details". You will then be prompted to "Press F1 to continue, DEL to enter

SETUP".

70

ASUS P3B-F User's Manual

Bios setup, 2 hardware monitor – Asus A7V133-VM User Manual

background image

ASUS A7V133-VM User’s Manual

72

4. BIOS SETUP

4. BIOS SETUP

Hardware Monitor

4.5.2 Hardware Monitor

CPU Temperature [xxxC/xxxF]

The onboard hardware monitor is able to detect the MB (motherboard) and
CPU temperatures. Set to [Ignore]only if necessary.

CPU Fan Speed [xxxxRPM]

The onboard hardware monitor is able to detect the CPU fan speed and the
chassis fan speed in rotations per minute (RPM). The presence of the fans is
automatically detected. Set to [Ignore] only if necessary.

NOTE: If any of the monitored items is out of range, an error message will
appear: “Hardware Monitor found an error. Enter Power setup menu for
details”. You will then be prompted to “Press F1 to continue, DEL to enter
SETUP”.

Just got a Asus P3B-F 440BX motherboard from a seller on Ebay. When I boot it up, I get a Hardware Monitor Error. I go into the BIOS and I see a red text for -5V (says it's actually -6.14v).

I'm using a new Corsair CX750M. I tried a different PSU (another CX750M) - same thing.

After some Googling, this guy seems to have the same problem, but was told to just ignore it, hardware monitor error asus. That doesn't seem right.
http://www.pcreview.co.uk/threads/p3b-f-bios- … -error.3831759/

Anyone else seen this issue before?

Edit - more details: I got this with the original bios (1004). I also updated to the newest "beta" firmware (1008f). Same thing on both.

Edit - more Googling and I found this:
http://forums.anandtech.com/showthread.php?t=21443

Seems that modern PSUs no longer have a -5V rail, so the hardware monitor freaks out and just displays -6.14v when it's actually floating. I confirmed by looking at the specs of my PSUs.

I'm still not feeling all that good about it. I wonder if I should look for an older PSU. Dang. that sounds like a bad idea as soon as I said it.

It is annoying the motherboard just hangs there until you hit Hardware monitor error asus to continue though.

How to Fix a CPU Fan Error

The Central Processing Unit (CPU) fan error is a common error message that can appear when starting up a Windows desktop computer or laptop. The warning is usually triggered after a computer has shut itself down due to overheating. It may happen when the fan (or fans) cannot cool the hardware sufficiently.

While frustrating, the CPU error message and the forced shutdown indicate the computer's safeguards are working correctly. If the fans aren't working and the computer continues to overheat, it can permanently damage hardware components.

There are ways to confirm the cause of overheating e e0800 error seiko the resulting error messages, as well as ways to fix them.

How the CPU Fan Error Appears

The CPU fan error commonly appears during a Windows PC's bootup or start-up process; it does not appear during regular Windows operation. The error message text usually appears as one of the following:

  • "Error: CPU Fan Has Failed!"
  • "CPU Fan Error"

What Causes CPU Fan Errors?

A CPU fan error on start-up is typically due to physical damage to the fan, incorrect settings, or external factors causing the computer to overheat and force the fan to run at unusually high speeds. Dust or other objects obstructing the device's air vents can cause CPU fan errors.

How to Fix a CPU Fan Error

Because hardware and software problems can cause CPU fan errors, fixes are equally varied and involve checking specific settings and the internal CPU fan.

Follow these tips to avoid CPU overheating and error messages.

  1. Move your computer. Leaving your computer in an area with a lot hardware monitor error asus heat or sunlight can cause it to overheat and shut down, no matter how hard the fan is working. Try moving your computer to a cooler room and never place it in direct sunlight throughout the day.

  2. Stop overclocking, hardware monitor error asus. A consequence of overclocking is a dramatic increase in system heat that the default fans can't manage. Overheating can damage circuits and cause frequent shutdowns and overheating errors.

  3. Keep your computer cool. The easiest way to clean the air vents is to remove the brush from your vacuum cleaner, hardware monitor error asus, then use it at full power to suck any dust and debris out. Alternatively, use an airgun or canned air to blast the dust out.

  4. Clean the CPU fans. For this step, you'll need to turn your computer off, unplug it from the power source, and open up the case. Once opened, you can clean the interior and remove dust with an air gun or canned air.

    Refrain from spraying any cleaning agents onto any parts, as this can seriously damage various components.

    Many devices, such as the Microsoft Surface line of products, are not designed to be opened, and doing so may void the warranty or cause permanent damage. Reference your device's official support manual or call customer service if you're unsure.

  5. Check your CPU fan. While you have your computer opened, physically check your device's fans to make sure they haven't loosened or fallen out of place. Depending on your fan model, you should be able to fasten your fans back into place with a screwdriver or glue.

    Whenever you're checking anything in the interior of an electrical device, make sure that it is completely turned off and disconnected from all power sources. Remember to choose Shut Down, not Sleep, when turning your computer off.

  6. Check your CPU fan's location, hardware monitor error asus. If you've installed the CPU fan yourself, ensure it's in the correct place. You should have connected it to the CPU header on the motherboard. If you've connected it elsewhere, the fan may run when the computer is on, but it won't sufficiently cool the CPU, hardware monitor error asus, which is its primary purpose.

    The CPU header will likely flashtool error s_da_nand_flash_not_found labeled "CPU Fan," but if it isn't, hardware monitor error asus, it's still easy to spot with its three holes for the fan's three-pronged plug.

  7. Try an alternate CPU fan header. If you have multiple CPU fan headers on your motherboard, try plugging the fan into a different slot. Doing this diablo loading error 126 fixes the CPU fan error.

  8. Check the CPU fan's settings in BIOS. You can use it to troubleshoot tech issues and make sure everything is as it should be.

    Open BIOS, then select wait f1 if error Settings > Hardware Monitor > CPU Fan. Enable Active Heat Sink and Fan Duct with Fan and disable Passive Heat Sink hardware monitor error asus Fan Duct without Fan. Save your changes and exit BIOS.

    You'll often be prompted to press F1 when you get the initial CPU error message. Pressing F1 when this message is visible will also open BIOS.

  9. Change the BIOS setting. If you can see your CPU fan working correctly and you're sure your computer isn't overheating or running too hot, this change to the BIOS setting in step No. 8 can bypass the CPU fan error message and get your device up and running.

    To do this, open BIOS and select Monitor > Fan SpeedMonitor > N/A > Ignore > Exit > Save Changes.

    This setting can affect your computer's ability to detect CPU fans hardware monitor error asus cause overheating problems in the future. We only recommend it if you are sure that your CPU fan is working and you can test your laptop's temperature.

  10. Replace the CPU fan. If none of the above works, your fan could be broken and need replacing. Your computer's warranty hardware monitor error asus cover the repair of the fan. If you purchased the fan separately, it might have a separate warranty you can use to get a free or discounted replacement part.

    The 8 Best Laptop Cooling Pads of 2022

FAQ

  • To fix a loud computer fan, start by cleaning the fans, check the Task Manager for programs that consume a lot of CPU, and take steps to keep your computer from getting hot.

  • You can control your CPU fan speed using software from the manufacturer or your PC's BIOS. Never set the fan speed to '0' as this may cause your CPU to overheat.

  • If the fan is working but you get an error, there could be an issue with the fan, or your computer hasn't registered that the error is fixed.

Thanks for letting us know!

4. BIOS SETUP

4.5.2 Hardware Monitor

MB Temperature, CPU Temperature [xxxC/xxxF]

The onboard hardware monitor is able to detect the MB (motherboard) and

CPU temperatures (for supported processors only). Set to [Ignore] only if

necessary.

Chassis Fan, CPU Fan, Power Fan Speed [xxxxRPM]

The onboard hardware monitor is able to detect the CPU fan speed, power

supply fan speed, and the chassis fan speed in rotations per minute (RPM).

The presence of the fans is automatically detected. Set to [Ignore] only if

necessary.

VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage, -12V

Voltage, -5V Voltage [xx.xV]

The onboard hardware monitor is able to detect the voltage output by the

onboard voltage regulators. Set to [Ignore] only if necessary.

NOTE: If any of the monitored items is out of range, an error message will

appear: "Hardware Monitor found an error. Enter Power setup menu for

details". You will then be prompted to "Press F1 to continue, DEL to enter

SETUP".

70

ASUS P3B-F User's Manual

Bios setup, 2 hardware monitor – Asus A7V133-VM User Manual

background image

ASUS A7V133-VM User’s Manual

72

4. BIOS SETUP

4. BIOS SETUP

Hardware Monitor

4.5.2 Hardware Monitor

CPU Temperature [xxxC/xxxF]

The onboard hardware monitor is able to detect the MB (motherboard) and
CPU temperatures. Set to [Ignore]only if necessary.

CPU Fan Speed [xxxxRPM]

The onboard hardware monitor is able to detect the CPU fan speed and the
chassis fan speed in rotations per minute (RPM). The presence of the fans is
automatically detected. Set to [Ignore] only if necessary.

NOTE: If any of the monitored items is out of range, an error message will
appear: “Hardware Monitor found an error. Enter Power setup menu for
details”. You will then be prompted to “Press F1 to continue, DEL to enter
SETUP”.

Hardware monitor error asus - happens

Just got a Asus P3B-F 440BX motherboard from a seller on Ebay. When I boot it up, I get a Hardware Monitor Error. I go into the BIOS and I see a red text for -5V (says it's actually -6.14v).

I'm using a new Corsair CX750M. I tried a different PSU (another CX750M) - same thing.

After some Googling, this guy seems to have the same problem, but was told to just ignore it. That doesn't seem right...
http://www.pcreview.co.uk/threads/p3b-f-bios- … -error.3831759/

Anyone else seen this issue before?

Edit - more details: I got this with the original bios (1004). I also updated to the newest "beta" firmware (1008f). Same thing on both.

Edit - more Googling and I found this:
http://forums.anandtech.com/showthread.php?t=21443

Seems that modern PSUs no longer have a -5V rail, so the hardware monitor freaks out and just displays -6.14v when it's actually floating. I confirmed by looking at the specs of my PSUs.

I'm still not feeling all that good about it. I wonder if I should look for an older PSU. Dang... that sounds like a bad idea as soon as I said it...

It is annoying the motherboard just hangs there until you hit F1 to continue though.

How to Fix a CPU Fan Error

The Central Processing Unit (CPU) fan error is a common error message that can appear when starting up a Windows desktop computer or laptop. The warning is usually triggered after a computer has shut itself down due to overheating. It may happen when the fan (or fans) cannot cool the hardware sufficiently.

While frustrating, the CPU error message and the forced shutdown indicate the computer's safeguards are working correctly. If the fans aren't working and the computer continues to overheat, it can permanently damage hardware components.

There are ways to confirm the cause of overheating and the resulting error messages, as well as ways to fix them.

How the CPU Fan Error Appears

The CPU fan error commonly appears during a Windows PC's bootup or start-up process; it does not appear during regular Windows operation. The error message text usually appears as one of the following:

  • "Error: CPU Fan Has Failed!"
  • "CPU Fan Error"

What Causes CPU Fan Errors?

A CPU fan error on start-up is typically due to physical damage to the fan, incorrect settings, or external factors causing the computer to overheat and force the fan to run at unusually high speeds. Dust or other objects obstructing the device's air vents can cause CPU fan errors.

How to Fix a CPU Fan Error

Because hardware and software problems can cause CPU fan errors, fixes are equally varied and involve checking specific settings and the internal CPU fan.

Follow these tips to avoid CPU overheating and error messages.

  1. Move your computer. Leaving your computer in an area with a lot of heat or sunlight can cause it to overheat and shut down, no matter how hard the fan is working. Try moving your computer to a cooler room and never place it in direct sunlight throughout the day.

  2. Stop overclocking. A consequence of overclocking is a dramatic increase in system heat that the default fans can't manage. Overheating can damage circuits and cause frequent shutdowns and overheating errors.

  3. Keep your computer cool. The easiest way to clean the air vents is to remove the brush from your vacuum cleaner, then use it at full power to suck any dust and debris out. Alternatively, use an airgun or canned air to blast the dust out.

  4. Clean the CPU fans. For this step, you'll need to turn your computer off, unplug it from the power source, and open up the case. Once opened, you can clean the interior and remove dust with an air gun or canned air.

    Refrain from spraying any cleaning agents onto any parts, as this can seriously damage various components.

    Many devices, such as the Microsoft Surface line of products, are not designed to be opened, and doing so may void the warranty or cause permanent damage. Reference your device's official support manual or call customer service if you're unsure.

  5. Check your CPU fan. While you have your computer opened, physically check your device's fans to make sure they haven't loosened or fallen out of place. Depending on your fan model, you should be able to fasten your fans back into place with a screwdriver or glue.

    Whenever you're checking anything in the interior of an electrical device, make sure that it is completely turned off and disconnected from all power sources. Remember to choose Shut Down, not Sleep, when turning your computer off.

  6. Check your CPU fan's location. If you've installed the CPU fan yourself, ensure it's in the correct place. You should have connected it to the CPU header on the motherboard. If you've connected it elsewhere, the fan may run when the computer is on, but it won't sufficiently cool the CPU, which is its primary purpose.

    The CPU header will likely be labeled "CPU Fan," but if it isn't, it's still easy to spot with its three holes for the fan's three-pronged plug.

  7. Try an alternate CPU fan header. If you have multiple CPU fan headers on your motherboard, try plugging the fan into a different slot. Doing this sometimes fixes the CPU fan error.

  8. Check the CPU fan's settings in BIOS. You can use it to troubleshoot tech issues and make sure everything is as it should be.

    Open BIOS, then select Advanced Settings > Hardware Monitor > CPU Fan. Enable Active Heat Sink and Fan Duct with Fan and disable Passive Heat Sink and Fan Duct without Fan. Save your changes and exit BIOS.

    You'll often be prompted to press F1 when you get the initial CPU error message. Pressing F1 when this message is visible will also open BIOS.

  9. Change the BIOS setting. If you can see your CPU fan working correctly and you're sure your computer isn't overheating or running too hot, this change to the BIOS setting in step No. 8 can bypass the CPU fan error message and get your device up and running.

    To do this, open BIOS and select Monitor > Fan SpeedMonitor > N/A > Ignore > Exit > Save Changes.

    This setting can affect your computer's ability to detect CPU fans and cause overheating problems in the future. We only recommend it if you are sure that your CPU fan is working and you can test your laptop's temperature.

  10. Replace the CPU fan. If none of the above works, your fan could be broken and need replacing. Your computer's warranty may cover the repair of the fan. If you purchased the fan separately, it might have a separate warranty you can use to get a free or discounted replacement part.

    The 8 Best Laptop Cooling Pads of 2022

FAQ

  • To fix a loud computer fan, start by cleaning the fans, check the Task Manager for programs that consume a lot of CPU, and take steps to keep your computer from getting hot.

  • You can control your CPU fan speed using software from the manufacturer or your PC's BIOS. Never set the fan speed to '0' as this may cause your CPU to overheat.

  • If the fan is working but you get an error, there could be an issue with the fan, or your computer hasn't registered that the error is fixed.

Thanks for letting us know!

4. BIOS SETUP

4.5.2 Hardware Monitor

MB Temperature, CPU Temperature [xxxC/xxxF]

The onboard hardware monitor is able to detect the MB (motherboard) and

CPU temperatures (for supported processors only). Set to [Ignore] only if

necessary.

Chassis Fan, CPU Fan, Power Fan Speed [xxxxRPM]

The onboard hardware monitor is able to detect the CPU fan speed, power

supply fan speed, and the chassis fan speed in rotations per minute (RPM).

The presence of the fans is automatically detected. Set to [Ignore] only if

necessary.

VCORE Voltage, +3.3V Voltage, +5V Voltage, +12V Voltage, -12V

Voltage, -5V Voltage [xx.xV]

The onboard hardware monitor is able to detect the voltage output by the

onboard voltage regulators. Set to [Ignore] only if necessary.

NOTE: If any of the monitored items is out of range, an error message will

appear: "Hardware Monitor found an error. Enter Power setup menu for

details". You will then be prompted to "Press F1 to continue, DEL to enter

SETUP".

70

ASUS P3B-F User's Manual

Bios setup, 2 hardware monitor – Asus A7V133-VM User Manual

background image

ASUS A7V133-VM User’s Manual

72

4. BIOS SETUP

4. BIOS SETUP

Hardware Monitor

4.5.2 Hardware Monitor

CPU Temperature [xxxC/xxxF]

The onboard hardware monitor is able to detect the MB (motherboard) and
CPU temperatures. Set to [Ignore]only if necessary.

CPU Fan Speed [xxxxRPM]

The onboard hardware monitor is able to detect the CPU fan speed and the
chassis fan speed in rotations per minute (RPM). The presence of the fans is
automatically detected. Set to [Ignore] only if necessary.

NOTE: If any of the monitored items is out of range, an error message will
appear: “Hardware Monitor found an error. Enter Power setup menu for
details”. You will then be prompted to “Press F1 to continue, DEL to enter
SETUP”.

0 Comments

Leave a Comment