Error pxe - e61 media test failure

error pxe - e61 media test failure

PXE-E61, Media test failure, check cable The error indicates a problem with your computer's PXE. Most often, this error occurs when your boot. It's common to see a PXE-E61 error message from a computer accidentally trying to boot from a network device when you're one that doesn't really. This indicates a problem with your computer's PXE (pre-boot execution environment). error pxe - e61 media test failure

Error pxe - e61 media test failure - would like

Best Solutions to “PXE-E61: Media Test Failure, Check Cable” [MiniTool Tips]

PXE-E61 Media test failure check cable is a black screen boot error you may receive accidentally on DELL/Acer/HP/Lenovo…. This error will stop the computer from booting successfully. To get rid of this issue, MiniTool Solution collects 7 solutions. You can read this article to select a suitable method.

PXE-E61: Media Test Failure, Check Cable

At times, when you boot your computer, you may see the machine boots into a black screen with an error message saying PXE-E61: Media test failure, check cable. You can see this error on different brands of computers like DELL, Acer, HP, Lenovo, and more.

PXE-E61: Media test failure, check cable

The full name of PXE is Preboot eXecution Environment. Do you know what it means?

“In computing, the PXE specification describes a standardized client-server environment that boots a software assembly, retrieved from a network, on PXE-enabled clients. On the client-side, it requires only a PXE-capable network interface controller (NIC), and uses a small set of industry-standard network protocols such as DHCP and TFTP.” From Wikipedia

Do you know why PXE-E61: Media test failure, check cable appears on your DELL/Acer/HP/LENOVO? Keep on reading.

The Main Reasons for the PXE-E61 Error

This error message of PXE-E61: Media test failure, check cable means that there is something wrong with the computer booting. Why does this issue happen? There are some main reasons as follows:

  • Your computer has power issues
  • The Ethernet cable is damaged or not connected properly
  • The boot order is misconfigured in BIOS
  • The system hard drive or network drive is physically damaged, corrupt, or crashed
  • The boot sector is damaged
  • And more…

Focusing on these causes, we collect some solutions that can effectively solve the PXE-E61 Media test failure check cable issue. If you don’t know the exact cause of the issue on your computer, you can try these solutions one by one to find a suitable one.

Solution 1: Check the Power Supply and Cables

When you open your computer, it will try to boot from the configured bootable drive. If the connection between the computer and the hardware is improper or lose, the boot process will fail and you may receive the error of PXE-E61 Media test failure check cable.

No matter your computer boots from a network drive or a hard drive, you need to go to check the power cables and all the cables inside the computer to see whether they are connected well.

If all the cables connections are well, but you still receive the PXE-E61 error, you can go to try the next solution.

Solution 2: Check the Ethernet Cable

If your computer boots from a network drive, you need to make sure that the Ethernet cable is not damaged. If it is damaged, you can replace it with a new one and then check whether you can boot your computer normally without the PXE-E61 Media test failure check cable error.

If you have ruled out this reason, you can continue to use the following method to have a try.

Solution 3: Remove the Non-System Disk from the Computer

If the BIOS of your computer is misconfigured by mistake and USB boot has the highest priority in the boot sequence, your computer will try to boot from the USB device first. This will, of course, leads to the computer unbootable issue and you may get the PXE-E61 error.

Moreover, to guarantee the success rate, you’d better remove all the non-system disks from your computer. You can refer to these steps:

  1. Unplug all the USB and 1394 (Firewire) devices that are attached to your computer.
  2. Remove all the CD/DVD discs from the drives on your computer.
  3. If there is a floppy disk drive, you need to remove it from the drive.
  4. Press and hold the Power button for about 5 seconds to turn off the computer. Then, press the Power button to turn on the PC.

Then, you can wait and see whether the computer can restart successfully.

While, if this method doesn’t work, the next one may be helpful.

Solution 4: Check the Boot Order of Your Computer

There are two different situations:

1. If your computer is going to boot from a network drive and then encounter the PXE-E61 Media test failure check cable error, you can go to check whether your computer is set to boot from the network drive in BIOS.

You can enter the BIOS utility to check whether the boot order is set correctly. If not, you need to set the network drive to be the first boot order and then check whether your computer can start successfully.

2. On the other hand, if your computer needs to boot from the hard drive but it is set to boot from a network drive that doesn’t contain the system, you can also enter BIOS to correct the boot order to get rid of the PXE-E61 Media test failure error.

While, if this is not the real cause of the PXE-E61 Media test failure check cable issue, you can go to use the next solution to see whether it can solve the problem.

Solution 5: Reinstall Windows on the Hard Drive

If all of the above solutions can’t help you solve the PXE-E61 issue, the Windows OS on the drive may be damaged. Reinstalling Windows is a good choice.

However, the whole Windows installation is not a single step. You can refer to the following steps to do the job.

Step 1: Prepare a Windows Installation Drive

You need to download the Windows 10 Media Creation Tool from the Microsoft official site on a normal working computer and then use the tool to build a Windows installation boot medium.

However, if you already have this boot medium, you can skip to the next step continue.

Step 2: Rescue Your Important Data on the System Disk

Usually, the Windows OS is installed on partition C and most of you prefer to reinstall the system to that partition, while the reinstallation process will delete all files on that partition. If there are some important files on partition C, you need to recover them to keep them safe.

The computer is unbootable now. You need to perform data recovery using a third-party file recovery tool. MiniTool Power Data Recovery is worth trying because it can not only detect the deleted data on the data storage devices but also find the existing items on the drive.

This software has a bootable edition that enables you to recover data from an unbootable computer. But, you first need to use the MiniTool snap-in WinPE bootable builder to build a bootable medium that allows you to boot your PC into MiniTool Power Data Recovery Bootable Edition.

Do these preparations on a normal working computer:

  1. Prepare a USB drive or CD/DVD.
  2. Go to the MiniTool official store to choose a proper edition that contains the bootable media builder. For example, if you are a personal user, the Personal Ultimate edition can fully meet your requirements.
  3. After purchasing the suitable edition, you will get a download link and a license key. Download and install the software on the computer. Then, open it and register it.
  4. Connect the USB drive or CD/DVD to the computer.
  5. Press the bootable media button that locates on the lower-left side of the interface and follow the wizards to build a MiniTool bootable medium.
click Bootable Media

After these steps, you can remove the prepared bootable medium from the computer and then connect it to the computer that is bothered by the PXE-E61 error.

Follow these steps to rescue your computer data:

1. Prepare an external drive that is large enough to save your computer data and connect it to your computer.

2. Set your computer to boot from the prepared MiniTool bootable medium.

3. The software will enter the This PC interface directly after booting. Just stay at this interface and select drive C to scan it.

select the target drive to scan

4. To ensure the recovery effect, you need to wait until the whole scanning process ends. Then, you will see a path list on the left side of the software interface. You can unfold each path to find the files you want to restore.

enter scan result interface

On the other hand, you can also use the Type feature to make the software show you the scan results by type. If you still remember the name of the files you want to retrieve, you can use the Find feature to locate those files one by one.

5. After checking the files you want to restore, you can press the Scan button and then select the plugged external drive to save them.

Tip: If you also want to recover data from the rest partitions on your computer, you can repeat these steps to do the work.

Now, your important data has been recovered. You can remove the external storage drive from your computer.

Step 3: Reinstall Windows 10 on the Hard Drive

To reinstall Windows on an unbootable computer, you need to follow these steps:

  1. Connect the Windows installation medium to your computer.
  2. Set your computer to boot from the medium and you will see the following interface. Click Next and follow the on-screen wizards to complete the Windows installation.
click Next

You can also refer to this post to complete the whole Windows reinstallation process: Detailed Steps and Instructions to Reinstall Windows 10.

Perhaps, you still receive the PXE-E61 error or the Windows installation fails. You will need to check and repair the computer hard drive.

Solution 6: Use CHKDSK to Check and Repair the Hard Drive

To use CHKDSK to check and repair your hard drive, you need to follow this guide:

1. After three successive unsuccessful bootings, your computer will boot into the Automatic Repair interface as follows. Press Advanced options to continue.

press Advanced options

2. Go to Troubleshoot > Advanced options > Command Prompt.

3. The Command Prompt is run as Administrator. You can type in the following command and press Enter:

chkdsk c: /f /r

CHKDSK will begin to detect errors and bad sectors on the drive. If it finds errors and bad sectors, it can automatically fix the errors and recover readable information.

It will take some minutes to complete the whole checking and repairing process. You need to be patient.

However, if this solution doesn’t work, the hard drive should be damaged and you need to replace it with a new one.

Solution 7: Replace the Damaged Hard Drive

If you discover that your computer hard drive is completely damaged, you have to buy a new one to replace it. You can search for an assembly instruction online and then do the hard drive replacement by yourself.

If you are not good at this, you can order a hard drive replacement from the manufacturer or ask a professional for help.

Important: Back up Your Computer Data Regularly

You see that computer issues always happen unexpectedly. To keep your computer data safe, you’d better form a good habit of backing up your files regularly.

Regarding computer data backup, you can try this professional data backup software: MiniTool ShadowMaker. This software can be used to back up the Windows operating system, files/folders, partitions, and the whole disk. It also supports automatic backup, full backup, incremental backup, and differential backup.

You can press the following button to get the trial edition of this software to have a free 30-day try.

Free Download

You can read this post to get more information about using this software to back up your computer data: How to Back up Computer to External Hard Drive in Windows 10/8/7.

Bottom Line

After reading this article, you must know how to deal with the PXE-E61 Media test failure check cable issue using different methods. No matter you are using DELL, Acer, HP, Lenovo, or some other brands of computers, you can always find a suitable solution here.

Should you have any questions when fixing this issue or using our software, you can send an email to [email protected] or let us know in the comment. You can also share your suggestions with us.

About The Author

Stella

StellaFollow us

Position: Columnist

Stella has been working in MiniTool Software as an English Editor for more than 4 years. Her articles mainly cover the fields of data recovery including storage media data recovery and phone data recovery, YouTube videos download, partition management, and video conversions.

User Comments :

You should read these repair tips if you see a Media Error pxe-e61 error message on your computer.

Speed up your PC in just a few clicks

  • 1. Download and install ASR Pro
  • 2. Open the application and click on the Scan button
  • 3. Select the files or folders you want to restore and click on the Restore button
  • Download this software now and say goodbye to your computer problems.

    It’s common to see a PXE-E61 error message from a computer accidentally trying to boot from a network device when you’re one that doesn’t really exist. This is often caused by an incorrect BIOS setting, but can also be caused by a failed fixed drive.

    How do I fix PXE-E61 error?

    Press F2 during boot to enter setup BIOS.Access the download menu for help.Check the boot disk order.Press F10 to exit the BIOS setup program.

    If your computer is a laptop, your website may not be able to open it and check the connection. In this case, we recommend that this procedure be carried out by a qualified repair technician.

    Unfortunately, this also means that in the event of a disk failure, any existing data that has not been backed up will also be lost.

    If your desktop doesn’t start and then throws an error; PXE-E61: Failed to attempt media, please check cables OR PXE-M0F: PXE ROM displays black screen, so this message is intended to help you. In this article, if we identify the possible causes of the error and find the most suitable solutions, you will most likely try to successfully solve each problem.

    The error ezah=”60″ indicates a problem with your computer’s PXE. In most cases, this error occurs when the shutdown sequence is incorrectly configured in the BIOS and the boot devicehard drive) cannot be read properly due to physical damage, damage, or failure. /p>

    • Power problem
    • Ethernet cable damaged
    • Hard drive or network generator
    • Boot sector corrupted

    In addition to the error messages used in this message, the following errors are related to PXE-E61:

    media error pxe-e61

    PXE-M0F: disable Intel PXE ROM.

    PXE-M0F: Exit Intel Boot Agent.

    No boot device found. Press any key to change it.

    PXE-M0F: PXE ROM Released

    If you’re having this issue, you can try our recommended solutions below in no particular order and see if the expert’s advice helps resolve the issue.

    1. Check power and cables
    2. Change boot order
    3. Check boot device
    4. Disconnect network drive
    5. Disable PXE < /li >
    6. Update network card driver
    7. Reset BIOS settings

    How do I fix the media test failure on my HP laptop?

    Step 1: Remove all non-system drives from your computer.Step 2: Check your hard drive.Step 3: Also remove the hard drive.Step 6: Reinstall Windows operating system with hard drive.Step 5: Schedule your repair.

    Let’s look at the description of the step required for each of the budget decisions.

    1] Check the power supply and cable

    media error pxe-e61

    As soon as you turn on your computer, the system will try to boot from the configured network boot drive. A loose or incorrect connection between the current hardware may cause the procedure to fail to run and cause the exact error.

    This solution requires you to carefully inspect the network drive to ensure that the power cables are properly connected and not damaged.

    2] Change Load Order

    If you want to boot from a disk, check online that the organizational disk is at the top of the boot order. If not at all, put it at the top of the BIOS settings.

    If you want to boot from the hard drive, put the hard drive at the top of the list. If the problematic drive does not appear as a new option in the boot order, this may indicate a faulty hard drive or a bad cable connection. If it’s a desktop computer, turn it off, open the case, and make sure the connection to the drive is secure and correct.

    The SATA cable may be faulty and the computer may not be able to detect sudden movement due to a bad cable connection SATA white. If the cables are just tightly connected to the drive and motherboard and the error occurs, try swapping the SATA cable.

    If the cables are securely connected to the hard drive, but the drive is still not recognized, you may need to almost completely replace the hard drive. Before starting, do it through S.M.A.R.T. test.

    3] Check boot device

    Speed up your PC in just a few clicks

    Is your computer running slow and unstable? Are you plagued by mysterious errors, and worried about data loss or hardware failure? Then you need ASR Pro � the ultimate software for repairing Windows problems. With ASR Pro, you can fix a wide range of issues in just a few clicks, including the dreaded Blue Screen of Death. The application also detects crashing applications and files, so you can quickly resolve their problems. And best of all, it�s completely free! So don�t wait � download ASR Pro now and enjoy a smooth, stable and error-free PC experience.


    If the BIOS is also incorrectly configured, booting from USB has the highest priority in the boot sequence, the BIOS will try to boot from USB first. If the connected Kindle USB is not bootable, it will most likely search the network for a bootable device, and you may receive a Media Test Failed error message.

    Remove the external USB process to skip booting from USB families, or create a bootable USB device on a Windows 10 PC, Linux or Mac.

    What is PXE-E61 failure?

    The PXE-E61 and PXE-M0F error can occur in the following situation: The Intel NUC is configured to boot over the network, but a certain network cable is not connected to my Intel NUC. The Intel NUC will not be able to find the Windows installation on our hard drive (the drive is not only recognized).

    Also boot performance is set to boot from USB.

    4] Disable network drive

    What does PXE media test failure mean?

    This indicates a problem with the PXE (Pre-Boot Execution Environment) of your own computer. Most often, this error occurs when your boot order has always been incorrectly configured in your BIOS or your boot device (usually your hard drive) can be read correctly.

    Most of you may have Windows installed on your hard drive, but the connected mlm drive has the highest priority.An honor in the boot sequence that experts say Windows doesn’t have. The computer will try to navigate from the network drive and can easily crash and hence cause this whole error. In this case, disconnect the computer from the network by unplugging the network cable.

    5]PXE

    This disable solution requires you to enter the BIOS and disable PXE if you don’t want to use it before you can use it. It is usually listed as “Network Boot” or “Ethernet” and is usually found in the boot menu.

    6] Update the network card driver

    An outdated, missing, or potentially corrupted driver can prevent the technology from accessing the network, preventing PXE from working properly. Since someone probably won’t be able to boot this computer to update drivers, your required safe mode boot might also change the boot order on some local drive. Once you’ve downloaded the download to your desktop, you’ll either need to update your drivers manually using Device Manager, or get the driver for updates that’s currently running.Its time is in the “Optional Windows Updates” section. Update. You can also download the latest driver from the network adapter manufacturer’s website.

    Download this software now and say goodbye to your computer problems.

    Erreur De Media Pxe E61
    Oshibka Nositelya Pxe E61
    Mediafout Pxe E61
    미디어 오류 Pxe E61
    Erro De Midia Pxe E61
    Medienfehler Pxe E61
    Errore Multimediale Pxe E61
    Mediafel Pxe E61
    Blad Mediow Pxe E61
    Error De Medios Pxe E61

    Error when Intel® NUC Starts: PXE-E61: Media Test Failure, Check Cable

    Try Troubleshooting PXE Boot With Network Protocol Analyzer or the Online PXE Error wizard.

    Note

    The instructions in this article will not work if you don't have an Intel® NUC.

    If you have a laptop or desktop system from another manufacturer such as Dell, HP, Lenovo, ASUS, ACER, etc., you MUST contact them for assistance in resolving the error message you're seeing. Click here for a list of popular system manufacturer’s and their support websites.



    What are you seeing?

    The following errors display when your Intel® NUC starts:

    • PXE-E61: Media test failure, check cable.
    • PXE-M0F: Exiting Intel Boot Agent.

      Intel® NUC errors

    Why are you seeing it?

    The PXE-E61 and PXE-M0F errors can happen in the following circumstances:

    • The Intel NUC is configured to boot to a network, but a network cable isn't connected to the Intel NUC. 
    • The Intel NUC can't find the Windows installation on the hard drive (The drive is not detected).

    How to fix it

    If you want to boot to a network drive:

    • Make sure the Ethernet network cable is fully connected to the RJ45 jack on the Intel NUC.
    • Try a different Ethernet network cable.

    If you want to boot to Windows on an internal hard drive:

    Step 1:

    The BIOS Setup might be configured to check for a network drive. You can disable the network boot as follows:

    1. Press F2 during boot to enter BIOS Setup.
    2. Go to Advanced > Boot > Boot Configuration.
    3. In the Boot Devices pane, disable Network Boot.
    4. Press F10 to exit BIOS Setup.

      Disable Network Boot

    Step 2:

    Check to see if the internal hard drive is detected in BIOS Setup:

    1. Press F2 during boot to enter BIOS Setup.
    2. Go to Advanced > Boot > Boot Priority.
    3. Check to see what is listed under Boot Drive Order.
    4. Press F10 to exit BIOS Setup.

      No Boot Drive

    If the Boot Drive Order shows No Boot Drive:

    • If you are using a 2.5-inch drive, check that the cable connections between the motherboard and the drive bay are secure.
    • Try installing a different known good drive.
    • Check to see if the drive is working—install it in a known good system.

    If you want to boot to Windows on an external USB device:

    • Make sure the USB device is fully connected to the USB port.
    • Connect the USB device to a different USB port on the Intel NUC to make sure there isn't a problem with that specific port.
    • Check that you enable the USB Boot option in BIOS Setup:
      1. Press F2 during boot to enter BIOS Setup.
      2. Go to Advanced > Boot > Boot Configuration.
      3. In the Boot Devices pane, enable (check) USB to enable USB boot.
      4. Press F10 to exit BIOS Setup.

        USB Boot option enabled

    • Be sure that the external USB device is a bootable device. You can use an application like Rufus* to create a bootable USB device.
    Note

    If you've tried all the steps listed above and your Intel NUC still doesn't start properly, Intel Customer Support can help.

    Click Contact Support below to find the support options for your region. Be ready to explain the steps you tried.

    How to fix boot error "PXE-E61: Media test failure, check cable"

    Updated: 10/11/2021 by Computer Hope

    PXE-E61: Media test failure error

    If your desktop or laptop computer fails to boot and gives the error:

    PXE-E61: Media test failure, check cable

    or

    PXE-M0F: Exiting PXE ROM

    This indicates a problem with your computer's PXE (pre-boot execution environment). Most often, this error occurs when your boot sequence is misconfigured in your BIOS, or your boot device (usually your hard drive) cannot be read correctly.

    Troubleshooting a media test failure

    To troubleshoot the media test failure error messages follow the troubleshooting steps below.

    1. Boot your computer and enter your BIOS Setup. Check that the boot sequence is not configured for network boot. Make sure your hard disk is listed in the boot sequence. Try making your hard disk the first device in your boot order using the keys shown at the bottom of your screen.
    1. If the hard disk is not listed as an option in the boot sequence, this may indicate a failed hard drive or a loose cable connection. If it's a desktop computer, power it down, open the case, and verify the connections to your hard drive are connected firmly and properly.

    In the image below, the power and data connections of a typical SATA hard drive are shown.

    Checking the connections on a SATA hard drive

    It's also possible that the SATA cable is defective and the computer is not able to detect the hard drive due to a bad SATA cable. If the cables are firmly connected to the hard drive and to the motherboard, and the error still occurs, try replacing the SATA cable.

    Note

    If your computer is a laptop, you may not be able to open it and check the connection. In this case, we recommend having a trained repair professional perform this task for you.

    1. You may also want to check the jumpers on your hard drive to make sure they are configured correctly. Again, this is only recommended if it's a desktop computer, not a laptop. Consult your hard disk manual for more information about correct jumper settings.
    2. In your BIOS setup, look for diagnostics options to self-test your primary hard disk drive. Consult your computer or motherboard manual for details.
    3. If all else fails, try resetting your BIOS to factory default settings.

    Bad hard drive

    If following the steps above does not help resolve the problem unfortunately it's likely the hard drive is bad and needs to be replaced. When a hard drive goes bad it is no longer bootable and because the computer has not boot device you'll get this error.

    Note

    Unfortunately this also means any data that was not backed up is also lost if the hard drive is bad.

    New hard drive doesn't work

    The media test failure error is most often caused by a bad hard drive. However, it's also possible other hardware could be bad. If you've installed a new hard drive, verified everything is connected correctly, and still getting the same problem, the cable or even the motherboard could be bad.

    How to Fix PXE-E61: Media Test Failure, Check Cable Boot Error?

    PXE-E61: Media Test Failure, Check Cable
    PXE-M0F: Exiting Intel Boot Agent

    This Error indicates that your BIOS settings are misconfigured or your hard drive might be failed. To fix the Media Test Failure, Check Cable error, it’s essential to know the root cause of PXE-E61.

    PXE stands for Preboot eXecution Environment, which is a boot mode supported by some of the motherboards. This allows the computer to boot from a network drive. The complete error message asks you to check the cable, as the computer couldn’t find the boot drive.

    The following could be the reasons for this error:

    • Power issue
    • Damaged ethernet cable
    • The misconfigured boot order in BIOS
    • Hard drive or network drive is physically damaged, corrupt, or crashed
    • Damaged boot sector

    In this blog, we’ll see the solutions to fix the PXE-E61 Media Test Failure error. But before you do that, you should always consider contacting a Professional Data Recovery Service provider in the first place. Trying to fix the error on your own involves the risk of permanent data loss.

    How to fix PXE-E61 Media Test Failure, Check Cable Error?

    1: Check the Power Supply and Cables

    As soon as you turn ON your PC, the system tries to boot from the configured bootable network drive. An improper or loose connection between the hardware may not allow the system to boot and cause PXE-E61: Media Test Failure error.

    Thoroughly inspect your network drive and make sure that power cables are properly connected and not damaged.

    Note: If the drive is corrupt or not detected, reach out to a data recovery expert and get back your inaccessible data.

    2: Remove external USB storage devices

    If the BIOS is misconfigured and the USB boot has the highest priority in the boot sequence, the BIOS will try to boot from USB first. If the connected USB device is not bootable then it will search the bootable device in the network and you may get the Media Test Failure error.

    Remove the External USB device to skip boot from USB.

    3: Change the boot order in BIOS

    If you want to boot from a network drive then, check if the network drive is placed at the top in the boot order. If not, set it at the top in the BIOS settings. You can do it as follows:

    1. Enter the BIOS setup utility as follows:

    • Turn ON or restart the PC.
    • Press the key used to get into BIOS setup utility while the PC turns ON. This is usually the F2 key (Refer to the manufacturer’s manual).

    2. Navigate to the Boot menu, where you can change the boot order.

    [NOTE]: The name of this menu could be different. Also, the boot order isn’t necessarily be found under this name. They may vary from one computer to the other.

    3. Use the keys mentioned on the menu to set a network drive as the highest priority to boot from. The device at the top in the row of devices has the highest boot priority.

    4: Disconnect the network drive or Reset BIOS

    It’s possible that you have Windows installed on your hard drive, but the connected network drive is set to the highest priority in the boot sequence which doesn’t have Windows installed on it. The computer will try to boot from the network drive and may fail—leading to a PXE-E61 error.

    To fix PXE-E61 Media Test Failure, Check Cable error, disconnect the network drive by removing the network cable.

    You can alternatively reset the BIOS to its default settings. This will boot the system from the internal hard drive.

    NOTE: You can reset the BIOS setting to its default option by removing and inserting the CMOS battery again.

    The CMOS battery is flat and round in shape. It looks like the ones used in electronic toys and watches. If it’s irremovable, don’t try to remove it, and follow the 1st method to reset the BIOS.

    [NOTE]: You can reset the BIOS setting to its default option by removing and inserting the CMOS battery.

    The CMOS battery is flat and round in shape. It looks like the ones used in electronic toys and watches. If it’s irremovable, don’t try to remove it, and follow the 1st method to reset the BIOS.

    5: Get the help of Data Recovery Experts

    If none of the solutions fixed the error, you shouldn’t try any other random step. Instead, you must reach out to the Professional Data Recovery Service provider to prevent any data loss. At the end of the day, it’s the data that is more important.

    [NOTE]: If you couldn’t fix the PXE-E61: Media Test Failure, check cable boot error then, you have to recover your data first. Recover your data to avoid permanent data loss. You can recover it by Free Data Recovery Software absolutely free. If you are unable to recover data by yourself then you can go for data recovery services. Remote Data Recovery and In-Lab data recovery are the two-option available for data recovery.

    Conclusion

    The error PXE-E61: Media Test Failure, check cable generally appears because the system couldn’t find a network drive to boot. We discussed the probable causes of the hard drive error and various solutions. We also mentioned the need and importance of Professional Data Recovery Services in resolving this error. Getting the help of Data Recovery Experts is always the best choice in such scenarios.

    Satellite A30 - PXE - E61: Media test failure, check cable of

  • Satellite L30-149-PXE-E61: Media test failure, check cable of

    Hello!

    My Toshiba Satellite L30-149 with the PSL35E-002002NS model number is equipped with a MK4032GSX drive HARD 40 GB, Bios V 1.90 and HP Windows XP Home edition.

    IT stops during startup with the text.

    For Realtek RTL8139 (x) /8130/ 810 x PCI Fast Ethernet Controller V2.13 (020326), PXE - E61: Media test failure, check cable PXE - M0F: exit ROM PXE, operating system not found.

    This occurs even if the disc is removed and seq. boot is changed so it should search the CD/DVD and even though the power and the battery has been disconnected for 15 minutes. If the power were during 20 hours them lights upward by DVD for a short so that at the next startup, but not if the power was turned off for a few minutes.

    Before he died, he showed the blue screen several times with diskerrors in the event log, and I was able to run/CHKDSK without errors a few times.

    Please advice how to reset the Fast Ethernet controller, not sure that a HDD defective only can cause the fault of I m.

    Thnx in advance
    Ben

    Hello

    I think that this is related to failure of HARD drive or lack of OS on the HARD drive.
    Is this message PXE ONLY appears if the portable computer is trying to boot from LAN.

    Means either the LAN was chosen in the BIOS as first boot device or operating system is not found on the HARD drive and so the BIOS automatically goes to the local network.

    So I recommend this audit in the worst case you will need to check if the new HARD drive would solve this

  • Satellite C660D - media failure PXE - E61: media test failure, check cable of

    Hello

    hope I can help with this problem.

    I have a Toshiba Satellite C660D, which I bought in 2011 and he has recently started to act, whenever I try to pass on it tells me

    Realtek PCIe GBE Family Controller series V2.38 (24/12/10)
    PXE - E61: media test failure, check cable.
    PXE - MOF: Exit PXE ROM
    Operating system not found

    This problem started when I tried to install the new operating system (Win 7 32 bit) on my hard drive of the windows partition, this instillation was a success, and I even managed to create a user profile after installation.

    However, as soon as I logged on to the computer says me he wants to get back out to check my windows and it did it automatically and since then he never restart and tells me that this media test failure error.

    I checked my hard drive if that work by connecting it as external on another computer and its still fine with everything that always there, I deleted and reintroduced it a couple of times, but always the media test failure still occur, I even tried to change the sequence of start several times, including the default settings , but the problem still persists.

    I have two laptops of the same type and both of them give me the same problems, I am running out of ideas on how to fix this problem any help will be much appreciated.

    Thank you

    Hello
    This message means that the system was not found on the HARD drive and the next boot device was LAN. But unit was not able to boot from LAN and so this PXE error appeared.

    You said that the HARD drive is OK. Well, what is the status of the HARD drive in the BIOS?
    HDD is recognized correctly in the BIOS on the first page of the BIOS?

    Where it is, you should try to reinstall the system once more.
    In the case of the disk HARD isn't visible in the BIOS, you must replace it.

  • HARD drive failed on the Satellite 5100-603 - PXE - E61: Media test failure, check cable

    Hello

    my laptop enter to the BIOS and tell me 'Intel (R) Boot Agent Version 4.1.03 Copyright (C) 1997-2002, Intel Corporation.
    PXE - E61: Media test failure, check cable
    PXE - B0F: Exit Intel Boot Agent.
    Insert system disk in drive.
    Press any key when ready... »

    and I started to install windows, it tells me 'hard disk without work... '. »

    Help me please

    Hello

    Sorry but I don't understand what kind of help you want. If the HARD drive is faulty, you should exchange it.
    Moreover, what model of laptop do you have?

  • Satellite A210-1AS-PXE-E61: media test failure, check cable of

    Hello

    I had some problems with my A210 overheating a stop (even tried extra cooling), but since the last stop, I am now unable to boot, I get the following...

    for fast ethernet Realtek RTL8100E/8101E network adapter v1.02 (060529)
    PXE - E61: media test failure, check cable of
    PXE - M0F: exit ROM PXE
    operating system not found
    Intel UNDI, PXE - 2.1 (build 082)

    I assumed that the HARD drive is dead, although I don't want to get another, only to find it's something else like a bad cable... I removed the HARD drive and given the link suddenly.

    If someone could advise me before I go and buy another HARD drive, I would be grateful.

    ... also, if I don't change the HARD drive, my Vista recovery disc would work with the new drive or do I need a new copy of Vista?

    Thank you

    Hello

    Yes, it's a typical message when the laptop cannot boot from the HARD drive and switches to the local network.
    I think that your HARD drive is not present may be dead
    You can check the BIOS if the HARD disk is which are listed there.

    If the HARD drive is not recognized in the BIOS, then I would recommend this replacement.
    As far as I know it takes 2.5 HDD SATA

    Greetings

  • Satellite Pro L10: PXE - E61 - Media test failure check cable error message

    I recently bought a laptop L10 without the hard drive, and whenever I try to start it with a hard disk newly installed, I get this message.
    PXE - E61: MEDIA TEST FAILURE CHECK CABLE
    PXE - MOF: EXIT PXE ROM
    OPERATING SYSTEM NOT FOUND.

    Someone can MAKE SENSE of IT AND ME the EXPLAIN, AND ALSO HOW can I GET the RECOVERY SOFTWARE I don't HAVE THE TOSHIBA RECOVERY CD BUT I don't HAVE THE CoA STICKER ON the laptop.

    IM DESPERATE PLESE HELP

    Hi Nash

    The PXE error occurs because the laptop tries to start first from the local network.
    You must enter the BIOS and change the order on HARD disk or a CD. I recommend that you set the LAN option at the end of the boot order.

    The recovery CD you can buy form the Toshiba service partner in your country.
    The number on the sticker is only an OEM key. You can not use it with a Windows operating system several.

  • Satellite A30: PXE - E61: Media test failure, error of control cable

    Hello.

    I have a huge problem:
    I was formatting my brothers laptop computer. Everything seems to work properly, he had begun to formate, but then I got a message to set disc 2.
    I put in and got a massage of error on the disc.
    So now all I get when I start the computer it's a massage says:

    For Realtek RTL8139 (X) /8130/ 810 X PCI Fast Ethernet Controller v2.13 (020326)
    PXE - E61: Media test failure, check cable of
    PXE - M0F: Exit PXE ROM
    Invaild partition table

    And noting seem to work at all.

    All I can do to fix this?

    Hello

    Seems the laptop does not recognize the attached HARD disk and it tires for a start of LAN.
    But the LAN initialization failed and so this error message is displayed.

    The partition table invalid error message means that something is wrong with your HARD drive partitions n.
    I think you should try to boot from the CD of Win XP and need to format the disk HARD whole again.
    Delete all partitions, everything! Format it again and try to reinstall the operating system.

  • Start problems PXE - E61: Media test failure, check cable of

    Hello
    I have a big problem with my toshiba satellite 3000 601. every time when I want to start it will not start and shows me:

    PXE - E61: Media test failure, check cable of
    PXE - MOF: Exit PXE ROM.

    I already changed the boot order in the bios but nothing happened.
    I have this problem for six months and one day the computer works without changing anything. but now I don't know what to do...
    can someone help me please.

    THX

    Hi DaCarlo,

    The error messages indicate that laptop you trying to make a network rather than boot from the CD or the HARD drive boot. There is usually a setting in your BIOS where you can indicate that you have a NIC (not PXE) boot. You can check that it is set correctly for NIC (no PXE).

    A NIC Boot starts from the selected list bootable devices that you specified in the BIOS. I'll make sure that you have your specified HARD drive is first in the list, or after after your CD if you prefer to have the CD option automatically available.

    HTH

  • Portege Z830, PXE - E61: Media test failure, check cable of

    Hello

    I have a problem on my Toshiba Portege Z830. After that I turn to the top of the computer, windows attempts even to start, instead, I saw the following message:

    PXE - E61: Media test failure, check cable of
    PXE - M0F: Exit Intel Boot Agent.
    Insert system disk in drive.
    Press any key when ready...

    From what I understand, it seems that laptop is trying to boot from LAN, instead of SSD.

    I did that in the BIOS boot order is reasonable. It is:
    1 HDD / SSD
    2. USB memory
    3. USB WEIRD
    4. DISKETTE DRIVE
    5 LAN
    I also tried to load the defaults in the BIOS, just in case.

    I also tried to re - install Windows 7 and Ubuntu installation, USB. In both cases, Installer was not able to discover any drive where system could have been installed.

    That seemed to me like a problem of material with SSD. And it's actually the second time I'll have it with this laptop. I got it about 4 months ago and at that time I sent my laptop certified Toshiba service in Zuerich. They sent it back, saying that the material was OK and he must have had a software problem.

    To my surprise, after that they sent back for some portable reason indeed started working, I have not yet lost all data (didn't need to reinstall the system, everything worked).
    I was happy, but since now the same thing happen again, I don't know what I have to do.

    Whether any other SSD that hardware problem? If Yes, what else can I try?

    If the only option is broken hardware, how can I make sure that this time he gets permanently fixed by Toshiba service?

    Thank you
    Alan

    > From what I understand, it seems that laptop is trying to boot from LAN, instead of SSD.

    It's OK; the message appears if no other boot device could be found.

    _Question: _
    SSD or HDD disk appears on the first page of the BIOS (size of the SSD drive and the name should be visible)?
    In case the SSD drive isn't in the list, there must be a problem with this device and I guess you have to replace it.

    > If the only option is broken hardware, how can I make sure that this time he gets permanently fixed by Toshiba service

    You simply ask the maintainer authorized Toshiba in your country.
    I guess guys will try to recover the laptop and where this is not possible, they would replace the faulty device.

  • Error PXE - E61: Media test failure, check cable of

    Original title: Hello: I got after the complete failure with your help, now I'm stuck here! Thank you!


    It is said

    Intel UNDI, PXE - 2.0 (build 081)

    Copyright (C) 1997-2000 Intel Corporation

    PXE - E23: BIS initialization failed

    PXE - E61: Media test failure, check cable of

    PXE - M0F: Exixting Intel PXE ROM

    Invalid Boot diskette

    Insert the STARTUP disk into drive A:

    I found that D: is my cd

    I had a few studies on the BACK, but it was 25 years ago!

    I can't get beyond this point.

    As I said at the beginning, I have it works on the internet.

    It's for my grandson to play his learning games, she is 5.

    Thank you

    Messages PXE always makes me check the boot order in the Bios to you make sure it is correct.  For Windows to load needs to access the hard drive on your machine, this is not the case.  The hard drive must be set before any PXE (Network Boot).  The message of the startup disk not valid because you inserted diskette that does not have a boot disk, then remove the disk from the drive.  Focus on the Boot order in the Bios.

    To enter the Bios (see your computer screen to the power, your manual or the manufacturer's web site) you probably rely on something like the delete key, or one of the F keys at startup time, but the actual key varies from a model.  Many computers call it "Enter Setup", the installation program is just another term for Bios.

    Set your Bios on the default security settings can also solve that for you.

  • Cisco UCS C210 M2: PXE - E61: Media test failure, check cable of

    Hello

    I'm working on Cisco UCS C210 M2 servers. I got 10 146 GB SAS HD with LSI MegaRAID Raid Controller. I did run the Raid Controller and choose RAID6. After that I installed ESXi and it said to reboot the server. Now, when I restart the server I get the following error message:

    PXE - E61: Media test failure, check cable of

    PXE - M0F: Exit Boradcom PXE ROM

    Restart, and then select proper boot service

    or Insert Boot Media in some boot device and press a key

    Any suggestions how I can solve this problem.

    Thank you.

    You will need to go into the Bios of the controller LSI MegaRaid (Ctrl + H) and select the option of virtual drives on the left. When the virtual command window opens, you must select the drive (Raid Volume) on which you want your drive master boot and underneath there will be an option to set as your boot device. Apply and save.

  • PXE - e61:media test failure check cable _ _

    I am building a new laptop, then after I put all the components and try to boot on cd-rom, he said

    PXE-check the cable of e61: media test failure

    I restar and selet at startup CD-Rom and told me the same message. If the pilot work, why not read the media?

    Anticipate thanks!

    It sounds as if your boot process is not configured properly, as the PxE boot is usually the last thing tried if no other bootable device is configured, or set to start before the network option.  Recheck the boot parameters.

  • Re: Satellite M70-190 begins with PXE - E61: Media test failure, check cable of

    Toshiba Satellite M70-190

    put a new drive hard WD 500 GB, sata3. When to start Notepad appears.

    Tried to change the mode to boot from LAN SD - nothing.
    How to fix?

    (HHD 2.5 "500 GB WD Scorpio Blue

  • Re: Satellite Pro A210 - strange start up error - PXE - E61 Media Test failure check

    Here's a weird scenario.

    HARD drive has failed. Fortunately, do regular backups, then restored on a new HARD drive.

    New HARD drive is securely fixed to the A210. Power on, HDD recognised by the BIOS and proceeds to start, get the following error:
    For the Fast Ethernet Realtek RTL8100E-8101E network adapter Version 1.02
    PXE - E61 Media Test failure check cable
    PXE - MOF from the PXE ROM

    A210 will BE boot from USB or DVD.

    Tried various things, internet research, found a lot of mistakes same or similar, air conditioned and have a no good result.

    I have a Paragon boot, booted disk in it. One of the options is to find some operating systems on hard disks. Try to find BONES. If you want to start in it, accept and Win 7 loads!

    So, why the A210 will not load the OS? It recognizes the HARD drive, and another medium may start in the operating system.

    Looking forward to your answers!

    Hello

    Have you tried to reinstall the OS on this HARD drive rather than install the backup?
    There may be something wrong with the backup you just

    Generally, this error because the BIOS cannot boot from the HARD drive and passes to the LAN.

    If the HARD drive is recognized in the BIOS then it must be something wrong with the operating system on the HARD drive.

    Recommend the fresh OS install and check it once more..,.

  • Satellite L300 - PXE - E61 media test failure

    Today, while browsing the Internet, my laptop decided to randomly cut to a screen with this error message:

    Intel UNDI, PXE - 2.1 (build 082)
    Copyright (C) 1997-2000 Intel Corporation

    For Realtek RTL8101E/8102E PCI - E Ethernet Controller v1.07 (080320)
    PXE - E61: Media test failure, check cable of
    PXE - M0F: Exit PXE ROM

    Intel UNDI, PXE - 2.1 (build 082)
    Copyright (C) 1997-2000 Intel Corporation

    For realtek RTL8101E/802E PCI - E Ethernet Controller v1.07 (080320)
    PXE - E61: Media test failure, check cable of
    PXE - M0F: Exit PXE ROM.
    No boot device - insert boot disk and press any key

    I have absolutely no idea what it means, and I use never no ethernet cable because I have a Wi - Fi connection, but he is relentless. I went through F2 and F12 and all settings are perfectly fine. Order of the BIOS is fine with the HARD disc on top.

    What should I do?
    Best regards

    Hey Buddy,

    If you have tested the HARD drive in a box of another and external HARD drive laptop without success the case is clear: the HARD drive needs to be replaced because it s defective!

    I can understand that you want to recover your data, but what do you do if you are not able to access? In this case you need assistance, a special data recovery lab, but it is not cheap and costs hundreds of dollars.

    I m wondering that you don't have a backup. Have you never tried to do it or thought it would be useful?

    Last but not least a new HARD drive can be ordered at a service provider authorized in your country or each computer store. Satellite L300 supports SATA 2.5 hard drives.

  • What necessary: Error pxe - e61 media test failure

    Error pxe - e61 media test failure
    ERROR GENERATING IMAGE. DRUPAL
    Parse vsa parts error
    Error creating cursor handle t-sql
    DELPHI IN MEDIAPLAYER1.ERRORMESSAGE

    PXE-E61 Media Test Failure Check Cable: Your BIOS settings may be incorrect or your hard drive may have failed, resulting in this Error. The underlying cause of PXE-E61 must be identified in order to resolve the Media Test Failure Check Cable problem.

    The PXE-E61 Media Test Failure check cable problem will be solved in this blog post. Consider Initially calling an experienced data recovery service provider before trying to fix the problem yourself. There is a danger of data loss if you attempt to address the problem yourself.

    What is PXE-E61: Media Test Failure Check Cable

    PXE-E61: Media Test Failure Check Cable

    PXE-M0F: Exiting Intel Boot Agent

    pxe-e61 media test failure check cable boot error

    Some motherboards offer PXE, which stands for Preboot eXecution Environment. The network drive may now be used to start the machine. As the computer couldn’t locate the boot drive, it asks you to check the cable.

    Reason for this Error PXE-E61: Media Test Failure Error pxe - e61 media test failure Cable

    • A problem with the electric power supply
    • Ethernet wire has been damaged.
    • The incorrect BIOS boot sequence has damaged, corrupted, or wrecked the hard disc or network device.
    • The boot sector has been damaged.

    How to Fix Error: PXE-E61 Media Test Failure Check Cable Boot Error

    1. Take a closer look at your power supply and the cable connections

    When you switch on your computer, the system immediately attempts to boot from the network drive that has been setup. PXE-E61: Media Test Failure check cable problem can be caused by a machine that fails to boot because of a faulty or loose hardware connection.

    Verify that the power connections are connected properly and are not damaged by doing a thorough inspection of your network drive.

    Note: You may need to contact a data recovery specialist to retrieve your data if the disc is faulty or not recognised.

    2. Remove any USB flash drives from your computer

    BIOS will attempt to boot from USB first if the boot sequence is configured incorrectly and the USB boot has the highest priority. Media Test Failure Check Cable problem can occur if the attached USB device cannot be booted because it will attempt to find a bootable device on the network.

    Remove the external USB device in order to bypass the USB boot.

    3. In the BIOS, you can alter the default boot sequence

    If you wish to boot from a network disc, make sure it is at the top of the boot order. If it isn’t, move it to the top of the list in the BIOS. It’s possible to accomplish this in the following ways:

    1# In order to access the BIOS setup utility, type in the following command:

    • Turn on the computer or restart it if necessary.
    • When the computer is turned on, press the key that is used to access the BIOS setup tool. The F2 key is typically used for this (see the user manual for further information).

    2# To alter the boot order, go to the Boot menu.

    Please Note that the name of this menu may change. The boot order, on the other hand, may or may not be found by its name alone. Some computers have a different set of options than others.

    3# Set a network drive to the highest priority by pressing the keys on the menu. It is the most important device in the row of devices to boot first.

    ALSO READ

    4. Reset the BIOS or disconnect the network drive

    In some cases, even if you have Windows installed on your computer’s hard drive, the linked network drive is programmed to take precedence in the boot process, error pxe - e61 media test failure, even though it doesn’t contain Windows. A PXE-E61 issue may occur if the machine is unable to boot from the network disc.

    Remove the network cable to unplug the network drive and repair the PXE-E61 Media Test Failure Check Cable issue.

    Alternately, you can return the BIOS to its factory settings by performing a reset. The internal hard disc will be used to start the computer.

    Note: Removing and reinserting the CMOS battery will restore the BIOS settings to their default state.

    A flat and round CMOS battery is used. In error pxe - e61 media test failure, it’s similar to those used in electronic toys and wristwatches. Don’t try to remove it if it’s non-removable and use the first technique to reset the BIOS.

    Note: Remove and reinstall the CMOS battery to restore the BIOS settings to their default values.

    A flat and round CMOS battery is used. In appearance, it’s similar to those used in electronic toys and wristwatches. Don’t try to remove it if it’s non-removable and use the first technique to reset the BIOS.

    5. Data Recovery Experts can assist you

    If none of the methods worked, you shouldn’t take any other random action to repair the problem. To avoid any data loss, you must instead contact a Professional Data Recovery Service provider. In the end, what matters most is the information contained inside the data.

    Note: Your data will need to be recovered if you can’t repair the PXE-E61: Media Test Failure Check Cable and verify cable boot error fault that you received. Avoid irreversible data loss by regaining access to the files you’ve lost, error pxe - e61 media test failure. By using Free Data Recovery Software, you may get it back for free. Data recovery services are available if you are unable to retrieve your files on your own. There are two options for data recovery: remote data recovery and in-lab.

    General FAQs

    What does Media Failure mean in Cable?

    A PXE error may be at blame for this (pre-boot execution environment). This error is most commonly caused by a faulty BIOS boot sequence or a boot device (typically your hard disc) that cannot be read successfully during the startup process.

    How do you test Media Failure?

    To fix a problem with a media test
    Your BIOS Setup can be accessed by booting up your computer and going into the BIOS menu. Make sure the boot sequence isn’t set up to boot via a network. Check to see if your error pxe - e61 media test failure drive is included in the list of devices to boot from. Using the keys error pxe - e61 media test failure the bottom of your screen, you may make your hard drive the first device to boot.

    Conclusion

    Media Test Failure Check Cable Issue PXE-E61: Generally, this error occurs when the system cannot locate a network disc to boot from. We spoke about the possible reasons of the hard disc problem and the different fixes that may be implemented. Ohaus cd-11 error 14 mistake also necessitates the use of professional data recovery services, error pxe - e61 media test failure. Data Recovery Experts are always the best option in these cases.

    How to Fix ‘PXE-E61: Media Test Failure, Check Cable’ Error

    Encountering PXE-E61 errors on computer? These errors are connected to PXE (Preboot eXecution Environment).

    What is PXE?

    PXE is a boot mode, which lets your computer scan for and load bootable operating system available in the network. It does not look for an operating system in your local hard drive.

    Users normally encounter PXE-E61 errors on computer whenever the computer searches for an operating system in the network but doesn’t find it. The reason for such behavior could be a misconfigured setting in BIOS. However, it could be sometimes occurring because of a failed hard drive as well.

    What is PXE

    Here are some issues that are related to PXE:

    • No Boot Device Found. Press any key to reboot the machine.
    • PXE-M0F: Exiting Intel Boot Agent.
    • PXE-M0F: Exiting Intel PXE ROM.
    • And last but important, PXE-E61: Media test failure, check cable

    In this article, we will be talking about PXE-E61: Media Test Failure error that is usually seen before the PC starts. It often appears in a white text on black background. An additionally text is also displayed above this error.

    How to Fix ‘PXE-E61: Media Test Failure’ Error: –

    1. Alter boot order in the BIOS to load operating system from the hard drive. It will prevent the computer from loading the OS that doesn’t exist in the network.
      • Note: – We recommend you put your best efforts to complete the above-mentioned step. Altering boot order is easiest way to fix any PXE errors.
    2. PXE-E61 errors also occur if the hard drive is disconnected or doesn’t function properly. Open BIOS and ensure that the BIOS can detect the local hard drive. You might see PXE-E61 error if the computer tries to boot to a hard drive that doesn’t function or is disconnected.
      • Find Boot menu and ensure that the sequence titled as Boot Drive Order (or something named likewise) displays local hard drive and doesn’t show “No Boot Drive.” In case, if your BIOS cannot detect the hard drive, switch off the computer, unlock CPU case (if you are using a desktop), and ensure that HDD cables are correctly attached.
      • Note: – If HDD cables are properly connected and error pxe - e61 media test failure BIOS still can’t detect the local hard drive, there is some issues with cables, hard drive or both are damaged. Your hard drive might get replaced. You can check whether your hard drive has failed via hard drive testing software.
    3. If you are attempting to load OS from an external hard drive like a USB drive, ensure that the device is bootable. If your device isn’t bootable, BIOS will scan for another bootable device and eventually end using the network option resulting into a PXE-E61 error.
      • However, there are many software available that can make your device bootable. You can search “How to Make USB bootable” online to get solutions.
      • Again, verify whether the boot order sequence is configured correctly i.e. pointed to USB. The USB device should be connected. If a port is not able to detect your USB drive, plug it into another port.
    4. You can also disable PXE in the BIOS if you don’t want to access it. You will find PXE with the title Boot to Network or Ethernet. You can find it in Boot menu.
    5.  If you want to use PXE to load operating system from a network device, verify that network cable is plugged in properly. In case of loose connection, PXE will not communicate with the network device and the PC will end up displaying PXE-E61 error.
      • You can try replacing cable with another working cable if you feel that the cable isn’t functioning.
    6. An outdated, or corrupted driver could stop PC from approaching the network to load OS. Therefore, updating network card drivers could fix PXE-E61: Media Test Failure error.
      • Note: – Although you may not be able to update network drivers as your PC is not able boot itself in the normal mode, you can try booting it in the ‘Safe Mode with networking’. You can also modify the boot sequence to a local hard drive to load your operating system. Once your PC has completely functional via ‘Safe Mode with networking’, you can update network drivers and then try booting via network once more.
    7. A misconfigured BIOS setting could result into a PXE-E61 error. You can empty CMOS to reset BIOS.  It will bring the BIOS to its default settings that will hopefully eliminate the error.

    Also Read: How To Enable/ Disable USB Ports On Windows 10?

    We have covered all possible scenarios that could lead to PXE-E61: Media Test Failure, error pxe - e61 media test failure. Fix this error with the following tips. We hope you will face no issues while performing these any of these steps. Feel free to share your experience or doubts in the error pxe - e61 media test failure section below. We will put in our best efforts to solve your issue.

    How to Solve “PXE-E61 Media Test Failure, error pxe - e61 media test failure, Check Cable” Error

    PXE (Preboot eXecution Environment) is a boot environment that Intel created. The PXE allows a workstation to boot up by using a network interface before it boots the operating system from the local storage devices such as the hard disk.

    When hard disk boot failure occurs, the computer will not boot up and a message saying “PXE-E61: Media Test Failure, Check Cable” appears. The error may also read “PXE-M0F: Exiting Intel PXE-ROM” or “Boot Failure: System Halted.” This error message repeats each time one attempts to start up the computer and it restricts one’s access to the hard disk data.

    Hard disk boot failure in PXE can happen for several reasons. The most common reason is physical hard disk failure due to a faulty or improperly connected hard disk. The error might also occur if a computer attempts to boot from a device and it cannot find the necessary boot files. The error can also appear because of incorrect BIOS (Basic Input/Output System) or CMOS (Complementary Metal Oxide Semiconductor) settings. The BIOS contains instructions about how the computer boots. The BIOS can only be updated or modified with BIOS updates. The CMOS contains the system settings and a CMOS battery powers it. The CMOS can be changed or modified by entering the CMOS setup.

    The setup for the BIOS and CMOS are the same, but the BIOS and CMOS on the motherboard are not the same. Below are steps to access the BIOS and CMOS to help solve the error.

    How to Find the Cause and Fix “PXE-E61 Media Test Failure, Check Cable” Error

    It is important to isolate the cause of the “PXE-E61 Media Test Failure, Check Cable” error and solve it. To do this, follow the steps below:

    1. A loose or improper hard disk cable connection can be the cause of the error. Forall oracle ignore error typically happens if the hard disk has recently been installed or moved. Check all of the hard disk’s cable connections before trying anything else to solve the error.
    2. Make sure that no other storage device is connected to the computer. If there is a storage device connected, remove it.
    3. When computer start up is being attempted, enter the BIOS to see if the hard disk has been set up correctly and detected in BIOS. To enter the BIOS, follow these steps:

    a. The key that must be pressed to enter the BIOS varies depending on the computer model. The key is most likely the Del key or one of the F keys. Many computers refer to this as Entering Setup and Setup is just another term used for the BIOS.

    b. Try setting one’s BIOS to any safe default settings. That might fix the error.

    1. Verify that the boot options in CMOS are setup correctly. Follow these steps to do this:

    a. Enter the CMOS by pressing one of the following keys: F1, F2, Del, error pxe - e61 media test failure, Esc, or F10. Press one of these keys when trying to start up the computer. If these keys do not work, try holding one or more keys on the keyboard when the computer is booting. This may cause a Stuck Key Error, which should allow the user to enter the setup.

    b. If the CMOS setup shows an option to boot from the LAN, disable this option.

    c. Try to set the CMOS settings to any safe default settings, then save and exit. After changing any settings, reboot the computer.

    1. It is possible that physical failure caused the error if the hard disk cannot be detected. If this is the case, replace the hard disk and restore one’s data if a good backup is available. If one does not have a good backup, contact a company that provides data recovery services. These companies perform hard disk recovery and securely retrieve one’s valuable data.

    How to Fix 'PXE-E61: Media Test Failure, Check Cable' Error

  • Change the boot order in BIOS to boot from the hard drive instead of the network. This will force BIOS to look for an operating system installed on a local hard drive, which is how most computers are set up.

    Try your best to complete this step. Changing the boot order to use the hard drive first should prevent any PXE related error messages.

  • Access BIOS and make sure it can detect the hard drive. You might see the PXE-E61 error if the computer tries to boot to a hard drive that doesn’t work or is disconnected.

    Find the Boot menu and make sure the Boot Drive Order screen (or something similarly named) shows a hard drive and doesn’t read “No Boot Drive.” If BIOS doesn’t detect a hard drive, shut down the computer, open the computer case (if you're on a desktop), and make sure the HDD cables are properly attached.

    If the cables are securely connected and the hard drive still isn’t detected, error pxe - e61 media test failure, you might need to replace the hard drive. Before you do, make sure it’s actually dead by using a hard drive testing program (if it’s not working, then those programs won’t find the HDD either).

  • If you’re trying to boot from a USB device like an external hard drive, make sure the device is actually bootable. If it’s not, the BIOS will look for a different device to boot from and might try to use the network, thus throwing the PXE-E61 error.

    You can use a program like Rufus to make a bootable USB device. See How to Burn an ISO File to a USB Drive if you need help doing that.

    Also double-check that the boot order is configured to boot from USB, that the device is fully connected, and that the USB port isn’t to blame—try moving the device to a different port if you’re not sure.

  • Enter BIOS and disable the PXE if you don't actually want to use it. It should be called something like Boot to Network or Ethernet, and is usually found in the Boot menu, error pxe - e61 media test failure.

  • If you do want to use the PXE to boot to a network device, check that the network cable is fully plugged in. If there isn’t a solid connection, then the PXE won’t be able to communicate over the network and will produce the PXE-E61 error.

    Replace the cable with a known good one if you suspect that it’s gone bad.

  • Update the network card drivers to fix the Media test failure, check cable error. An outdated, missing, or corrupted driver can prevent the computer from accessing the network, which in turn stops the PXE from working properly.

    Since you most likely can't boot to your computer to update the drivers, attempt to start in Safe Mode or change the boot order to use the local hard drive first. After updating the network card drivers, try booting from the network once more.

  • Clear CMOS to reset the BIOS. If the PXE-E61 error is due to a misconfigured BIOS setting, resetting BIOS to its default options will hopefully clear out the error. snmp error send_query permission denied

    How to Fix PXE-E61: Media Test Failure, Check Cable Boot Error?

    PXE-E61: Media Test Failure, Check Cable
    PXE-M0F: Exiting Intel Boot Agent

    This Error indicates that your BIOS settings are misconfigured or your hard drive might be failed. To fix the Media Test Failure, error pxe - e61 media test failure, Check Cable error, it’s essential to know the root cause of PXE-E61.

    PXE stands for Preboot eXecution Environment, which is a boot mode supported by some of the motherboards. This allows the computer to boot from a network drive. The complete error message asks you to check the cable, as the computer couldn’t find the boot drive.

    The following could be the reasons for this error:

    • Power issue
    • Damaged ethernet cable
    • The misconfigured boot order in BIOS
    • Hard drive or network drive is physically damaged, corrupt, or crashed
    • Damaged boot sector

    In this blog, we’ll see the solutions to fix the PXE-E61 Media Test Failure error. But before you do that, you should always consider contacting a Professional Data Recovery Service provider in the first place. Trying to fix the error on your own involves the risk of permanent data loss.

    How to fix PXE-E61 Media Test Failure, Check Cable Error?

    1: Check the Power Supply and Cables

    As soon as you turn ON your PC, the system tries to boot from the configured bootable network drive. An improper or loose connection between the hardware may not allow the system to boot and cause PXE-E61: Media Test Failure error.

    Thoroughly inspect your network drive and make sure that power cables are properly connected and not damaged.

    Note: If the drive is corrupt or not detected, reach out to a data recovery expert and get back your inaccessible data.

    2: Remove external USB storage devices

    If the BIOS is misconfigured and the USB boot has the highest priority in the boot sequence, the BIOS will try to boot from USB first. If the connected USB device is not bootable then it will search the bootable device in the network and you may get the Media Test Failure error.

    Remove the External USB device to skip boot from USB.

    3: Change the boot order in BIOS

    If you want to boot from a network drive then, check if the network drive is placed at the top in the boot order. If not, set error 503 activesync error at the top in the BIOS settings. You can do it as follows:

    1. Enter the BIOS setup utility as follows:

    • Turn ON or restart the PC.
    • Press the key used to get into BIOS setup utility while the PC turns ON. This is usually the F2 key (Refer to the manufacturer’s manual).

    2, error pxe - e61 media test failure. Navigate to the Boot menu, where you can change the boot order.

    [NOTE]: The name of this menu could be different. Also, the boot order isn’t necessarily be found under this name. They may vary from one computer to the other.

    3. Use the keys mentioned on the menu to set a network drive as the highest priority to boot from. The device at the top in the row of devices has the highest boot priority.

    4: Disconnect the network drive or Reset BIOS

    It’s possible that you have Windows installed on your hard drive, but the connected network drive is set to the highest priority in the boot sequence which doesn’t have Windows installed on it. The computer will try to boot from the network yp_add] yp.shoutcast.com gave error nak and may fail—leading to a PXE-E61 error.

    To fix PXE-E61 Media Test Failure, Check Cable error, disconnect the network drive by removing the network cable.

    You not a regular file error scp alternatively reset the BIOS to its default settings. This will boot the system from the internal hard drive.

    NOTE: You can reset the BIOS setting to its default option by removing and inserting the CMOS battery again.

    The CMOS battery is flat and round in shape. It looks like the ones used in electronic toys and watches. If it’s irremovable, don’t try to remove it, and follow the 1st method to reset the BIOS.

    [NOTE]: error pxe - e61 media test failure can reset the BIOS setting to its default option by removing and inserting the CMOS battery.

    The CMOS battery is flat and round in shape. It looks like the ones used in electronic toys and watches. If it’s irremovable, don’t try to remove it, and follow the 1st method to reset the BIOS.

    5: Get the help of Data Recovery Experts

    If none of the solutions fixed 1c 8.1.15.14 runtime error error, you shouldn’t try any other random step. Instead, you must reach out to the Professional Data Recovery Service provider to prevent any data loss. At the end of the day, it’s the data that is more important.

    [NOTE]: If you couldn’t fix the PXE-E61: Media Test Failure, check cable boot error then, you have to recover your data first. Recover your data to avoid permanent data loss. You can recover it by Free Data Recovery Software absolutely free. If you are unable to recover data by yourself then you can go for data recovery services. Remote Data Recovery and In-Lab data recovery are the two-option available for data recovery.

    Conclusion

    The error PXE-E61: Media Test Failure, check cable generally appears because the system couldn’t find a network drive to boot. We discussed the probable causes of the hard drive error and various solutions. We also mentioned the need and importance of Professional Data Recovery Services in resolving this error. Getting the help of Data Recovery Experts is always the best choice error pxe - e61 media test failure such scenarios.

  • 1 Comments

    Leave a Comment