Canon ip 1700 error 5100

canon ip 1700 error 5100

Print head (cartridge) is not installed properly. 1470. 5 flashes. Print head may be damaged. Support Code=5100, C000 Printer error has occurred. Cancel printing, turn off the machine, then confirm the following. Push down the ink. Check printer Cartridge Fitting The ink cartridge inside the printer can cause the Canon Printer Error 5100. Sometimes improperly set ink. canon ip 1700 error 5100

Canon ip 1700 error 5100 - matchless

Service Error 5100 is often experienced when a new printer is turned on, or when the printer is preparing to print. This is because the cartridge carriage can not move, or movement is hampered by the "something". This method is used for all types of printers, Canon IP1200 IP1300, IP1500, IP1600, IP1700, iP1800, IP1900, MP140, MP150, MP160, MP180

Try to open the hood of your printer. then try to turn it on. Usually when catrigde train was in the right position (cartridge train parking), this error will appear. Turn off your printer and slide the carriage to the middle or left. Notice on the right end, there is a component assy (ga know what it's called) only where the printer ink  or cleaning heads. In a series of IP are usually white, and black on the MP. 

Note the four aces this place is connected to the printer body, as this is usually dry or grease / lubricant discharged. If you have a grease / lubricants, give this as a lubricant in the fourth. Do not use oil lubricants yes, try to use oil. Or if it does not mean that the remaining fat just like that.

But sometimes this does not work, especially if as has been used, consumed by the printer body. If you have this I usually play the cannibal, aka replacing other parts of the printer (which is already ga used) to fix it.In addition to wear and dry lubricant, usually with her ​​baggy. and also sometimes there are unpleasant and foreign objects in the prop. Clean up is a foreign body. Sometimes the use of cleaning or deep cleaning that is too often also can accelerate this damage. This is because the ink will be spilled and soaked like that. So try to clean the ink with a tissue.

Artinya kurang lebih :

Service Error 5100 ini sering terjadi ketika printer pertama kali dihidupkan, atau ketika printer ingin mencetak. Hal ini karena kartrid tidak bisa bergerak, atau terhambat oleh sesuatu. Biasanya dialami oleh semua jenis printer canon seperti : Canon IP1200 IP1300, IP1500, IP1600, IP1700, iP1800, IP1900, MP140, MP150, MP160, MP180


Coba buka kap printer Anda. kemudian nyalakannya. Biasanya masalah ini muncul ketika catrigde berada pada dudukanya
Matikan printer Anda dan geser kereta ke tengah atau kiri. Perhatikan pada akhir kanan, ada komponen assy (ga tahu apa namanya) hanya di mana printer tinta nyedot atau membersihkan kepala catrigde. Di seri IP biasanya putih, dan hitam pada seri MP. Perhatikan empat as tempat ini terhubung ke body printer, karena biasanya kering atau pelumas habis. Jika Anda memiliki pelumas, lumasi keempat as. Jangan menggunakan pelumas cair atau minyak, cobalah untuk menggunakan pelumas. karena mnyebabkan lemak yang tersisa bila kering.

Tapi kadang-kadang ini tidak berhasil, terutama jika terjadi keausan atau korosi akibat pemakaian printer yg berlebihan. Bila itu terjadi biasanya gunakan cadangan dari printer lain, alias mengganti bagian dari printer lain (yang sudah tidak digunakan lagi) untuk memperbaikinya. Selain jarang dilumasi. juga terkadang ada benda asing jatuh pada rel printer. Bersihkan benda asing tsb. Kadang-kadang penggunaan pembersihan atau membersihkan terlalu sering juga bisa mempercepat kerusakan ini. ini adalah karena tinta akan tumpah dan direndam seperti itu. Jadi coba bersihkan tinta dengan tisu.

from : Community health centers

Troubleshooting Tips To Fix Canon Printer Error 5100 (Easy Guide)

Are you looking for a solution for your Canon printer error 5100? See this post to troubleshoot your Canon printer error

Canon is the most trusted brand for printers. Canon printers are purchased and used for home and office use by millions of people worldwide. Its printers are equipped with the best technologies. Printers built for office and home use are bundled with loads of features. Like any other printer or machine, sometimes you may have errors or problems with your Canon printer. The Canon Printer Error Code 5100 is one of those errors that is common and reported by many users worldwide.

Canon Printer Error 5100: Problem Overview
The Canon Support Code 5100 starts showing on the computer screen for various reasons. This can be easily solved by some troubleshooting steps. We will give you all possible reasons and solutions to fix this error very easy. You will be able to fix it yourself, just by reading and following the guide.

Which type of Canon printer has this problem?
Canon printer error code 5100 is the problem with most Canon printers. As we talk specifically about which type of printer is in Canon error code 5100, we can easily say according to our research that almost all types of printers have this problem but Canon All-in-One Inkjet Printer (Multifunction printers) have this problem mostly. There are other types of printers that run into this error such as the occasional Canon Professional Inkjet Printer, Canon Photo Inkjet Printer and Megatank Inkjet Printer.

Which Canon printer model has this problem?
As I have explained, most all-in-one printers (multifunction printers) have this error problem, but a specific model series mostly has this problem. It has been observed that PIXMA model series printers mostly encounter Canon printer error 5100. There are some printer models for which users often seek solutions to fix the Canon printer Error 5100. You will also be able to solve the problem for all these listed models and other models.

E410 IP2770 MP258 MX410
E500 IP2772 MP280 MX430
E510 IP2870 MP287 MX432
E610 IX6560 MP450 MX439
G2000 JX210P MP470 MX452
IP1300 MG2570 MP490 MX472
IP1700 MG4250 MP600 MX490
IP1800 MP145 MX310 MX492
IP1880 MP160 MX340 MX497
IP1900 MP230 MX360 MX535
IP1980 MP237 MX377 MX870
IP2700 MP250 MX397 MX922
Solution: Canon Printer Error 5100
Let's hope to solve Canon printer error 5100. But before we start we need to understand what position you are stuck in such as if you have just bought a printer and you get this error 5100 when setting it up for the first time. This can only mean that you have left some protective material or tape inside the printer. This may be the most obvious reason for showing Canon printer error code 5100.

Also Read:: 4 Amazing Method to Fix HP Printer Error 0x6100004a?
In this situation you just need to open the paper output cover and make sure that no protective material or tape is still attached to the ink cartridge holder. Now just close the printer paper output cover as it was before and this error has been fixed or not. If you are still receiving this error message, follow the step by step guide below to fix it. The Canon Error 5100 is basically just cartridge-related error.

Step-by-step guide to fix Canon printer error 5100
If your printer was running fine and you suddenly encountered this error, follow the troubleshooting steps below to fix the Canon printer error 5100

Check for paper jam inside the printer
Check printer cartridge fittings
Reset printer
Clean dust inside the printer
Clean the print bar / encoder
Look for obstruction or obstruction
Reset inkset
Check for paper jam inside the printer
If you were printing something and the Canon printer error 5100 showed up while printing, it is possible that the paper might get jammed. You need to clean the paper jam inside the printer.

First, check the paper jam in the sheet feeder tray. If you see any paper, gently take out the paper with both hands, otherwise the paper may burst.
Open printer output cover and make sure no piece of paper is inside.
Open the printer back panel and check if the paper is trapped inside.
Now load the paper again in the feeder tray
Back on the power on and turn on the printer, if the paper jam is still inside then it will come out automatically.
Check Printer Cartridge Fitting –
The ink cartridge inside the printer can cause a Canon printer error 5100. Sometimes improperly set the printer to prevent the printer from working properly and this may trigger an error 5100. You need to properly rerun the printer cartridge to resolve this error. To resume the cartridge, place your printer on the steps below.

Open the front panel, as you open the front panel cartridge will automatically move and close at the replacement position. Some Canon models are in the middle of the printer in the replacement position and in some, it is to the right of the printer. If in your printer, the replacement position is in the right side of the printer, then a separate cartridge cover will open. Now turn off the printer.
Once the cartridge holder stops at the replacement position, press the cartridge down until it is clicked.
Now you can remove the cartridge.
Now re-set the cartridge in place again and make sure it is properly remodeled.
Close the front cover and if it is checked.
Reset The Printer –
If you are getting an error message, then resetting the printer is one of the easiest steps to get rid of the error. Sometimes the printer needs to be reset after prolonged use. This may be needed after heavy work done by the printer. Any invalid buffer data is cleared when we reset the printer. It also resets sensors that may be stuck in special mode. Whenever you get stuck with some printer error you should try to reset the printer. To reset the printer, follow the steps below.

Turn off the power of the printer with the power button. Some models are not available in the power button.
Disconnect the power cord and data cable from the printer.
Wait for 10 minutes and plug it back in.
Now turn on the printer again.
Clean Dust Inside The Printer –
If we do not keep our printer clean and away from dust, debris and ink, it can trigger a 5100 error. Cleaning your printer can fix the error. You should try to clean your printer periodically. To clean the printer, first turn it off.

Take a little dump cloth and clean the outside of the printer. Rub lint-free cloth and alcohol to clean the inner side, use with a gentle hand. Do not force any hardware. If you wish, you can use a vacuum cleaner or air can to clean by hand.

Clean The Printing Strip/Encoder –
The printing strip is a transparent plastic material inside the printer that is just behind the drive belt and cartridge holder. It is transparent and plays an important role in printing. It communicates with the printer head. If it is dirty, it can also be a Canon printer error 5100.

Check whether this printing strip is clean or not. If it is a stain, clean it. To clean it you need a cotton swab and rubbing alcohol. Moisten a cotton swab with alcohol and gently wipe the encoder film. Do not touch it with your hand and change the swab repeatedly if it is dirty. Now if your encoder film is cleaned then close the output cover and turn on the printer. Check if the error has been resolved.

Look For Obstacle Or Obstruction –
Any obstruction that may prevent or prevent the movement of cartridges in its passage may result in a printer error 5100. Watch for any obstruction that may be en route to the cartridge. If you get any clear.

Reset Ink Absorber –
The ink absorber is for absorbing ink in the printer. Sometimes ink absorbers may cause printer error. Therefore, we only need to reset the ink absorber. To reset the ink absorber, you need to press and hold the power button, while reconnecting the power cord by pressing the power button. As soon as the printer is powered, then release the power button, pause for 5 seconds and press the power button again.

Tips to avoid Canon printer error 5100 and other issues
Your printer needs maintenance from time to time, as it needs another device to get out of it and it runs it error-free.

Keep your printer clean. Always check for dust, debris and ink stains if it is found to be clean at certain intervals.
Always use genuine ink cartridges.
Clean printer head occasionally to get the best quality print.
Always use paper of the right size and thickness.
Contact Canon Printer Support
The above steps should fix Canon Printer Error 5100. If your problem is not solved by following the above steps, you can take help of Canon printer support. Canon provides service for its products that are free for the first year after purchase. It also provides customer support to deal with technical issues such as Canon printer error.

Conclusion:
Hopefully, this post helps you troubleshoot Canon Printer Error 5100. We have explained all the solutions in detail so that you can fix the problem. Let's know, how useful was this post to solve your problem?

Led Error code for Canon IP1300, IP1700, IP1200, IP1880, IP1980

 

Having problem with Canon IP1300, IP1700, IP1200, IP1880, IP1980. Sign that looked to be only led blinking. Following some solutions problem of printer that marked with led blinking.

3x Orange 1x green

Problem : any problem with printer mechanics

Solution: If you don’t have knowledge about printer mechanic, will better if bring the printer to Canon service center.

4x orange 1x green

Problem printer absorber full

Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset

5x orange 1x green

Problem: Black or Color cartridge trouble.

Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.

7x orange 1x green

Problem: Black or Color cartridge trouble.

Note: problem is usually caused many matters, for example chips error, conector is dirty, etc.

8x orange 1x green

Problem printer absorber full (Waste Ink Pad Full)

Solution: Reset the printer using generaltools or software resetter. If not work using reset manual. Each printers having different set of manual reset

 

Liked this post? share it with your friends and peer !

  

Leave a Reply to this Post Cancel Reply

 

Changing Drive Icon with Your Own Icon

How to Reset Ink Level Canon MX300 Cartridges

 

Error Number 5100 Canon Pixma Ip2770 · PDF fileCanon iP 2770 printer or called Canon 2700 Error messages appear on the monitor is “Error ... IX 6560 Printer canon IX 6560 emang

  • Error Number 5100 Canon Pixma Ip2770After my previous post of Bhayu Blog on How to Fix Canon Pixma iP2770 Question OurCanon Pixma MP450 printer gives Error 5100 Error Code K9. Still on the printer, then weknow the position of The colors in the Cartridge CL-811 PIXMA IP 2770 and position Placesthe Color Cartridge On our HP Advanced.

    Error 5100 Printer Canon iP2770 is usually caused by twoof the following: Infuss ink Previous post: How to ResetPrinter Canon PIXMA iP2770. Next post:.Canon GENERIC "S" SERIES RESET CODE ~ Printer Repair And Service Tools Canon PixmaIP2770 Error 5100 ~ Printer Repair And Service Tools. Error 5100 Printer Canon iP2770 -Canon iP 2770 printer or called Canon 2700 Error messages appear on the monitor is ErrorNumber: 5100 So this 5100. Download Driver Canon Pixma iP2770 For Windows, Mac Os,Linux Compabilty and System Requirement Windows 7, Windows 8, Windows Vista and Other.

    Error Number 5100 Canon Pixma Ip2770>>>CLICK HERE

  • Home Service Canon Service Error 5100Canon Service Tool Canon IP2770 ErrorCode 005 Service Tool Canon IP2770 ErrorCode 005 Service Tool.How to fix canon pixma MG5100 error 5B00, the waste ink counterreset, Question - I have a canon MP492 MG5100 which is reading errorcode 5B00-what - DN. This minute I present assets nearly How to ResetCanon IP2770 MG5100. but there is also a variety iP2770 printer erroras error code 5B00, Error 5100, Canon Pixma iP100 Driver MobilePhoto PrinterCanon Pixma iP100 Mobile. Mengetahui lebih banyakprinter Canon IP2770 Number of Nozzles, 1472 PIXMA iP2770 - CanonIndonesia - Personal CARA MENGATASI ERROR 5100 PAD CANONIX 6560 Printer canon IX 6560 emang kalau di infus agak sering. SolusiCanon Ip2770 Error 5B00- driveresetter.blogspot.com Solutions CanoniP2770 Error MP480 Canon MP276 Cannon MP540 with a B200ERROR Error code E05 Suggestions from Mengatasi Printer Error 5100Canon MP 237. Canon PIXMA iP2870 Driver DownloadCanon PIXMAiP2870 Driver its predecessor the PIXMA iP2770, using cartridge PG-745 (Black) and CL-746 for color. Learn how to fix the Canon printererror 5100, and have your printer running Canon Pixma iP2770 error5B00 or blinking 7 times mean, The Ink Absorber.

    Error code 5100 and B200 solutions,Printing on the Canon Pixma PRO-100 from various KAOS DTG EPSON ORIGINAL,How to ResetCounter Canon iP2770

    Here is some code indicator lights Printer Canon Mp237 damage andhow to Canon Pixma MP237 Error 5100, Paper Jammed with Blinkinglights 2 times.

    How to Fix Canon Pixma iP2770 error 5B00 Canon Pixma MX420

  • Printer 5100 Error and Loading Ink PROTA - Error Code E05 CanonMP258 - Step3.

    Canon Pixma Mx420 Printer 5100 Error And Loading Ink How To FixCanon Pixma Ip2770 Error 5b00 Cannon Mp205 Error Code E02/paperJam Fix!

    Click Download to save How To Fix Canon Pixma Ip2770 Error 5b00 inmp3 format (download) - Canon Pixma Mx395 Support Error Code5100 Paper Jam. For those customers who are looking for affordable andhigh-quality printing solutions, Canon has launched two new affordablemodels of printers along. Error 5100 on Canon iP2770 printer also canoccur in other types of printers such as the Canon iP1200 canon printer,canon printer iP1700, iP1200 canon. Canon Pixma MX420 Printer 5100Error and Loading Ink.blogspot.com/2014/11/how-to-fix-canon-pixma-ip2770-error-5b00.html Service Mode Problem When. You may also seethis error Support Code=5100 Error Code=P, 0, 2 (LED.

    Canon mp237 error 5100 or E22 When we use a Canon printer to printsomething. which actually it is an error code or error code E22 on acomputer , the more share tips and tricks how to reset error 5200 onCanon Pixma iP2770 prin. Canon 5100 error is often called the Canon2700 general e. Error messages that appear on the monitor is ErrorNumber 5100 So this error 5100 Canon PIXMA MG2540 Driverdownload Filed Under: Brohter Tagged With: canon 5100 error, canon5100 error fix, canon 5100 error ip2770, canon 5100 error message.Error code 5100 PIXMA MX472 printer Canon Community Errorcode 5100 PIXMA MX472 printer, Service tool pixma ip2770 (ResetterPixma iP2270

    >>>CLICK HERE

  • Canon pixma iP2770 error 6000This video was uploaded from an Android phone. Error 5100Canon Ip2700 con CISS Se atascan las manguerasSi no tienes Service [email protected] code canonMP237Service Printer Canon Kode error.

    Error Number 5100 Canon Pixma Ip2770Error 5100 Printer Canon iP2770 is usually caused by two of the following: Infuss ink Previous post: How to Reset Printer Canon PIXMA iP2770. Next post:.Home Service Canon Service Error 5100 Canon Service Tool Canon IP2770 Error Code 005 Service Tool Canon IP2770 Error Code 005 Service Tool.

  • Are you in looking for a solution for your Canon printer error 5100? Let’s check out this post to troubleshoot your canon printer error

    Fix-Canon-Printer-Error-5100

    Canon is the most trusted brand for printers. Canon printers are bought and used by millions of people worldwide for both home and office use. Its printers are well equipped with best technologies. The printers manufactured for office & home use are bundled with loads of features.

    just like any other printer or machine, sometimes you may get error or Problems with your Canon printers. Canon Printer Error code 5100 is one of those errors which is common & reported by many users worldwide.

    Solution

    Which Canon printer model has this problem

    • Canon printer error 5100: Problem overview

    The Canon Support Code 5100 starts to show on the computer screen for various reasons.  It can be easily resolved by a few troubleshooting steps. We will explain to you all possible reason & solution to fix this error in a very easy manner. You will be able to fix this yourself, just by reading & following the guide.

    Which Canon printer type has this problem?

    Canon Printer Error code 5100 has been problem with most of the canon printer. As we talk specifically that what type of printer is encountered by Canon Error Code 5100 then we can easily say as per our research that almost all type of printer has this problem but canon All-in-one inkjet printers (Multifunction printer) has this problem mostly.

    There are other types of printers as well which run into this error sometimes like Canon Professional inkjet printers, canon Photo inkjet printers & Megatank inkjet printers.

    Which Canon printer Model has this problem?

    As I have explained that mostly All-in-one printers (Multifunction printer) has this error issue but there are one specific model series has this issue mostly. It has been seen that PIXMA model series printer encounters Canon printer error 5100 mostly.

    There are few printers model for which users search for solution frequently to fix Canon error 5100. You will be able to resolve the issue for all these below-listed models and other models too.

    E410IP2770MP258MX410
    E500IP2772MP280MX430
    E510IP2870MP287MX432
    E610IX6560MP450MX439
    G2000JX210PMP470MX452
    IP1300MG2570MP490MX472
    IP1700MG4250MP600MX490
    IP1800MP145MX310MX492
    IP1880MP160MX340MX497
    IP1900MP230MX360MX535
    IP1980MP237MX377MX870
    IP2700MP250MX397MX922

    Solution: Canon printer error 5100

    Let’s hop up to solve Canon printer error 5100. But before start we need to understand, what situation you are stuck in like if you have just bought a printer & while first time setting it up you get this error 5100. It means it might be just because of you have left some protective material or tape inside the printer. This could be the most obvious reason to show canon printer error code 5100.

    In this situation you need to just open paper output cover and need to ensure that there is no protective materials or tapes are still attached with the ink cartridge holder. Now just close the printer paper output cover as it was earlier & check this error has been fixed or not.

    If you still getting this error message then follow below-mentioned step by step guide to fix it. Canon error 5100 is basically error related to cartridge only.

    nots

    Note: while performing any of the troubleshooting steps, make sure to turn your printer off unplugged the power cable.

    Be gentle with your approach

    Before starting Advanced troubleshooting steps, we recommend using Restoro Repair Tool. (Save Lots of your Time & Effort)

    This PatentedSoftware Automatically fixes common windows problems, repair & optimize the windows registry, optimize your Pc for optimum performance, safe you from data loss & hardware failure and secure you by removing malware, optimizes your internet and protects your identity online.

    Step to Fix Canon Printer Error 5100

    If your printer was running fine & suddenly you get this error, Perform the Below troubleshooting Steps to Fix the Canon Printer Error 5100

    Check for Paper Jam Inside the Printer

    If you were printing something and the Canon Printer Error 5100 showed up while printing then it is possible that the paper is jammed. You need to clear the paper jam inside the printer.

    1. First, check for paper jam in sheet feeder tray. If you see any paper stuck there then gently pull the paper out with both hand otherwise paper could be tear apart.
    2. Open canon Printer Output Cover & Ensure There Is No Piece Of Paper Inside
    3. Open printer output cover & ensure there is no piece of paper inside.
    4. Open printer back panel and check whether the paper is stuck inside or not.
    5. Now load the paper again in the feeder tray
    6. Back the power on & turn on the printer, if still there would be paper jam inside then it will come out automatically.

    Check printer Cartridge Fitting

    The ink cartridge inside the printer can cause the Canon Printer Error 5100. Sometimes improperly set ink cartridge to stop the printer from functioning properly and it may trigger error 5100. You need to reseat the printer cartridge properly to resolve this error. To reseat the cartridge, keep your printer on & follow the below steps.

      1. Open front panel, as you open the front panel cartridge will move automatically & stop at replacement position. In some canon model replacement position is in the middle of the printer & in some, it is the right side of the printer. If in your printer, replacement position is in the right side of the printer then a separate cartridge cover will open. Now turn off the printer.
    Open Front Panel of Canon Printer
    nots

    Note: Do not try to move or stop the cartridge holder forcefully.

      1. Once the cartridge holder stops at replacement position then push down the cartridge until it clicks.
    canon printer once the cartridge holder stops at replacement position
      1. Now you can take out the cartridge.
    Canon printer take Out The Cartridge
    1. Now again reseat the cartridge at it place and make sure it has reseated properly.
    2. Close the front cover and check if its work.

    Reset the Printer

    if you are getting any error message then resetting printer is one of the easiest steps to get rid of the error. Sometimes after long use the printer requires to be reset. It can be needed after heavy work carried out by printer also. When we reset the printer then any invalid buffer data is cleared. It resets sensors as well which may stuck in particular mode. Whenever you stuck with some printer error you must try resetting the printer. To reset the printer, follow the below steps.

      1. Turn off the Power of the printer with power button. In some model power button may not available.
    Turn off the Power canon printer
      1. detach the power cord & data cable from the printer.
    Detach The Data Cable From The Canon Printer
    1. Wait for 10 minutes and plug it back.
    2. Now turn on the printer again.

    Also Read:-Guide to Fix Canon Printer Not Responding Error (Solved)

    Clean Dust inside the Printer

    If we do not keep our printer clean and away from dust, debris & ink, it may trigger error 5100. Cleaning your printer may fix the error. You should try to clean your printer periodically. To clean printer first turn it off.
    Take a slightly dump cloth and clean the outside of the printer. To clean internal side use lint-free clothes and rubbing alcohol, use with gentle hand. do not forcefully move any hardware. If you want you can use handheld vacuum cleaner or air can to clean.

    Clean the Printing Strip/Encoder

    Printing strip is a transparent plastic material inside the printer which is just above the drive belt & behind cartridge holder. It is transparent and plays important role in printing. It communicates with printer head. If it is dirty It may also cause canon printer error 5100.

    Canon Printer printing encoder strip

    Check if this printing strip is clean or not. If it is smeared, then clean it. To clean it you need cotton swab and rubbing alcohol. Wet a cotton swab with rubbing alcohol and wipe the encoder film gently. Do not touch it with your hand and change the swab frequently if it gets dirty.

    Now if your encoder film is cleaned then close the output cover and turn on the printer. Check if the error has resolved.

    Also Read:-Fix Printer is Not Responding

    Look for obstacle or obstruction

    Any obstacle which may prevent or hinder the movement of cartridge in its pathway may result to a printer error error 5100. Look for any obstacle which may be in the pathway of the cartridge. If you find any clear it.

    Reset Ink absorber

    Ink absorber is meant for absorbing waist ink in the printer. sometimes ink absorber may be the reason for printer error. So, we just need to reset the ink absorber. To reset ink absorber, you need to press and hold the power button, while holding the power button reconnect the power cord. As printer get powered on then release the power button, wait for 5 seconds and again press the power button.

    If None of the Solutions Worked for You, We Recommend Using Restoro Repair Tool.
    1. Click to Download Patented Software, rated great on TrustPilot.com
    2. Click Start Scan to find Windows issues that could be causing PC problems.
    3. Click Repair All to Repair, Optimize & Secure your PC

    Tips to avoid canon printer error 5100 & other issues

    Your printer needs periodic maintenance as any other equipment to get best out of it and it make it run error-free.

    • Keep your printer clean. Always check for dust, debris & ink stains, if found clean it at fixed interval.
    • Always use genuine ink cartridge.
    • Clean printer head occasionally to get best quality print.
    • Always use paper of correct size & thickness.

    Contact Canon Printer Support

    The above steps should fix the Canon printer error 5100. If your problem is not solved by following the above steps then you can get help from official Canon printer Support. Canon provides service for its products which is free for the first year after the purchase. It also provides customer support for handling technical issues like Canon Printer Error.

    Final words: Conclusion

    Hopefully, this post helps you troubleshoot canon printer error 5100. We have explained all the solutions in detail so that you could fix the problem. Do let us know, how helpful was this post to solve your problem?

    You Might Also Like

    Canon Printer Error 5100

    Guide to Fix Error 5100 in Canon Printers: Brief Guide

    Canon is one of the most trusted and reliable tech manufactures across the world. Its devices are trusted by millions of users all around the world and gain benefits from all kinds of devices that are dedicatedly designed for both personal and professional usage. Now, when it comes to Conon printers, the devices are well equipped with all modern technologies and they are manufactured for both home and office usages including dedicated features.

    However, there are times when users have reported Canon Printer Error 5100 in their printing devices that not only hampers their work flow but also put their machines at risks. If you have been a Canon user and have been facing such an issue in your device then here’s what you need to know to fix it.

    An Overview on the Printer Error 5100: Canon

    The Canon Printer Error 5100 is basically associated with the Canon printer’s ink cartridges. If there is anything wrong with your printer’s ink cartridges due to nay malfunction then you will see the error 5100 on your computer screen. However, this error usually occurs on all Canon printers but canon All-in-one inkjet printers and PIXMA model series.

    What Are the Canon Printers That Are Affected By Error 5100?

    As mentioned earlier, All-in-one printers (Multifunction printer) are usually get affected by this error but there are certain specific model series that are usually affected by error 5100. The following are the major printer models on which the Canon Printer Error 5100 usually occurs.

    E410,E500,E510,E610,G2000,JX210P,IP2770, IP1300, IP1700,IP1800,IP1880,IP1900, IP1980,IP2700, IP2772,IP2870, IX6560,MP258,MX410,MP280,MX430,MP287,MX432,MP450,MX439,MP470,MX4520,MG257,MP490,MX472,MG4250,MP600,MX490,MP145,MX310,MX492,MP160,MX340,MX497,MP230,MX360,MX535,MP237,MX377,MX870,MP250,MX397,MX922.

    So, what to do now to fix Canon Printer Error 5100 and what major steps can be taken to get rid of this common issue? Here’s how you can do this.

    Simple Solutions to Fix Error 5100 in Canon Printers

    You can follow the simple solutions mentioned below to get rid of the Canon printer error 5100 in your printers.

    Solution 1: Check If Paper Is Not Jammed Inside the Printer

      • Remove the printer output cover or printer head and then see if there is no paper stuck inside the device
      • Next, remove the back panel of the device and then see whether the paper is stuck inside or not in Canon printer error 5100.
      • Now, simply insert a new paper inside the paper tray or feeder tray and then turn on the printer to see if the issue still persists

    Solution 2: Reset Your Canon Printer

        • Turn off your Canon device using its power key or detach its power cord and data cable to resolve Canon printer error 5100.
        • Wait for 10-15 minutes, plug-in all cords in the printer and turn-on the device
        • You can also try other solutions in order to fix this Canon issue such as the following:
        • Check printer’s cartridges
        • Clean up the printer’s insides, printing strip/encoder
        • Reset the ink absorber

    Solution 3: Check Printer Cartridge Fitting

    There ink cartridge in the Canon printer which is responsible for Canon printer error 5100. In some cases inappropriately set ink cartridge to prevent the printer from working appropriately and it might trigger Error 5100. You have to reseat the printer cartridge appropriately to determine this error. To reseat the cartridge, keep your printer on and follow the steps.

          • Open Front Panel, As You Open The Front Panel Cartridge Will Move Automatically and Stop At Replacement Position. In Some Canon Model Replacement Position Is In The Middle Of The Printer and In Some, It Is The Right Side Of The Printer. On the off chance that In Your Printer, Replacement Position is In the Right Side of the Printer Then a Separate Cartridge Cover Will Open. Presently Turn Off The Printer.
          • When The Cartridge Holder Stops At Replacement Position Then Push Down The Cartridge Until It Clicks.
          • Now take Out the Cartridge.
          • I. Again Reseat the Cartridge at It Place and Make Sure It Has Reseated Properly.
            II. Close The Front Cover and Check If It’s Work.

    Solution 3: Clean the dust of Printer

          • On the off chance that we don't keep our printer spotless and away from dust, flotsam and jetsam and ink, it might trigger blunders Canon printer error 5100. Cleaning your printer may fix the mistake. You should attempt to clean your printer intermittently. To clean printer first turn it off.
          • Take a marginally dump material and clean the outside of the printer. To clean interior side use build up free garments and scouring liquor, use with delicate hand. Don’t powerfully move any equipment. On the off chance that you need you can utilize handheld vacuum cleaner or air can to clean.

    Moreover, if you are still unable to fix Canon Printer Error 5100 then it is strongly recommended that you get in touch with the tech support experts to get professional assistance on fixing the issue.


    A Support Code Is Displayed

    Support Code=1600

    <Cause>

    Ink may have run out.

    <Action>

    Replacing the ink tank is recommended.

    If printing is in progress and you want to continue printing, press the machine's OK button with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The machine may be damaged if printing is continued under the ink out condition.

    -> [ Replacing an Ink Tank ]

    REFERENCE

    • Do not remove an ink tank until a new one is prepared to be installed.

    - Once you remove an ink tank, the machine will not operate until a new one is installed.

    - Once you remove an ink tank, the machine will not operate even if the removed ink tank is just reinstalled.


    Support Code=1660

    <Cause>

    The ink tank is not installed.

    <Action>

    Install the ink tank.

    Replacing an Ink Tank

    When you need to replace an ink tank, follow the procedure below.

    See[Replacing an Ink Tank]


    Support Code=1688

    <Cause>

    The ink has run out.

    <Action>

    Replace the ink tank and close the front cover.

    -> [ Replacing an Ink Tank ]

    Printing under the current condition may damage the machine.

    If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the machine's Stop button for at least 5 seconds, and then release it.

    With this operation, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition.

    REFERENCE

    • Do not remove an ink tank until a new one is prepared to be installed.

    - Once you remove an ink tank, the machine will not operate until a new one is installed.

    - Once you remove an ink tank, the machine will not operate even if the removed ink tank is just reinstalled.


    Support Code=1754

    <Cause>

    The ink tank is not installed properly.

    <Action>

    Open the front cover.

    Then push the ink tank.

    After installing the ink tank properly, close the front cover.

    If the problem is not resolved, contact the service center.

    IMPORTANT

    • The ink tank that was once installed cannot be removed until the ink runs out.

    Support Code=1755

    <Cause>

    The ink has run out.

    <Action>

    To maintain both machine and print quality, the machine cannot continue printing under the ink out condition.

    Cancel printing and replace the ink tank before printing again.

    IMPORTANT

    • Do not remove an ink tank until a new one is prepared to be installed.

    - Once you remove an ink tank, the machine will not operate until a new one is installed.

    - Once you remove an ink tank, the machine will not operate even if the removed ink tank is just reinstalled.


    Support Code=5500, 5501

    <Cause>

    Ink tank has not been properly recognized.

    <Action>

    Contact the service center.


    Support Code=1700, 1701

    <Cause>

    The ink absorber is almost full.

    <Action>

    Press the machine's OK button to continue printing. Contact the service center.


    Support Code=5B00, 5B01

    <Cause>

    Printer error has occurred.

    <Action>

    Contact the service center.

    Replacing an Ink Tank

    When you need to replace an ink tank, follow the procedure below.

    See[Replacing an Ink Tank]


    Support Code=2500

    <Cause>

    The cause of following may have occurred the failure of Automatic Print Head Alignment.

    • Print head nozzles are clogged.
    • The paper of size other than A4 or Letter is loaded in the cassette 1.
    • The paper output slot is exposed to strong light.

    <Action>

    Press the printer's OK button to dismiss the error, then take the actions described below.

    • Print the nozzle check pattern to check the status of the print head.
    • Load one sheet of A4/Letter-sized plain paper in the cassette 1 and perform Automatic Print Head Alignment again.

    For Automatic Print Head Alignment, always load paper in the cassette 1.

    • Adjust your operating environment and/or the position of the machine so that the paper output slot is not exposed directly to strong light.

    After carrying out the above measures, if the problem continues after aligning the print head again, press the printer's OK button to dismiss the error, and then perform Manual Print Head Alignment.


    Support Code=B202, B203, B204

    <Cause>

    An error requiring you to contact the service center has occurred.

    <Action>

    Turn off the machine, and unplug the power cord of the machine from the power supply.

    Contact the service center.

    IMPORTANT

    • If you unplug the power cord, all the faxes stored in the machine's memory are deleted.

    Support Code=5100, 5102, 5103, 5104, 5105, C000

    <Cause>

    Printer error has occurred.

    <Action>

    Cancel printing, turn off the machine. Then confirm the following.

    • Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing the print head holder from moving.

    If any, remove the materials.

    • Confirm that the ink tanks are installed properly.

    Push an ink tank until it clicks into place.

    After confirming the conditions above, turn on the machine again.

    If the problem is not resolved, contact the service center.

    IMPORTANT

    • When you clear the jammed paper or protective material that is preventing the print head holder from moving, be careful not to touch the clear film or the white belt.

    If the paper or your hands touch these parts and blot or scratch them, the machine can be damaged.


    Support Code=5200, 5203, 5204, 5205, 5206, 5207, 5208, 5209, 5400, 5C01

    <Cause>

    Printer error has occurred.

    <Action>

    Turn off the machine, and unplug the power cord of the machine from the power supply.

    Plug the machine back in and turn the machine back on.


    Support Code=6000, 6500, 6502, 6800, 6801, 6900, 6901, 6902, 6910, 6911, 6920, 6921, 6930, 6931, 6932, 6933, 6940, 6941, 6942, 6943, 6944, 6945, 6946, 7100, 7200, 7201, 7202, 7203, 7204, 7205, 7300, B502, B503, B504

    <Cause>

    Printer error has occurred.

    <Action>

    Turn off the machine, and unplug the power cord of the machine from the power supply.

    Plug the machine back in and turn the machine back on.


    If Support Code=6910 is displayed, follow the procedures below.

    1. Temporarily turn off the power of all other devices on the network.

    2. Set the [ IPv6 settings ] of the machine to [ Inactive ].

    3. Place the machine in a different location.


    If the problem is not resolved, contact the service center.


    REFERENCE

    • How to Disable the IPv6 Settings of the Machine

    1. Select [ Setup ] on the operation panel.

    2. Select [ Device settings ].

    3. Select [ LAN settings ].

    4. Select [ Other settings ].

    5. Select [ TCP/IP settings ].

    7. When a message displays, select [ Yes ].

    8. Select [ Enable/disable IPv6 ].

    9. In the screen displayed, select [ Inactive ].


    Troubleshooting Tips To Fix Canon Printer Error 5100 (Easy Guide)

    Are you looking for a solution for your Canon printer error 5100? See this post to troubleshoot your Canon printer error

    Canon is the most trusted brand for printers. Canon printers are purchased and used for home and office use by millions of people worldwide. Its printers are equipped with the best technologies. Printers built for office and home use are bundled with loads of features. Like any other printer or machine, sometimes you may have errors or problems with your Canon printer. The Canon Printer Error Code 5100 is one of those errors that is common and reported by many users worldwide.

    Canon Printer Error 5100: Problem Overview
    The Canon Support Code 5100 starts showing on the computer screen for various reasons. This can be easily solved by some troubleshooting steps. We will give you all possible reasons and solutions to fix this error very easy. You will be able to fix it yourself, just by reading and following the guide.

    Which type of Canon printer has this problem?
    Canon printer error code 5100 is the problem with most Canon printers. As we talk specifically about which type of printer is in Canon error code 5100, canon ip 1700 error 5100, we can easily say according to our research that almost all types of printers have this problem but Canon All-in-One Inkjet Printer (Multifunction printers) have this problem 403 php error. There are other types of printers battlefield 3 error kernel32.dll run into this error such as the occasional Canon Professional Inkjet Printer, Canon Photo Inkjet Printer and Megatank Inkjet Printer.

    Which Canon printer model has this problem?
    As I have explained, most all-in-one printers (multifunction printers) have this error problem, but a specific model series mostly has this problem. It has been observed that PIXMA model series printers mostly encounter Canon printer error 5100. There are some canon ip 1700 error 5100 models for which users often seek solutions to fix the Canon printer Error 5100, canon ip 1700 error 5100. You will also be able to solve the problem for all these listed models and other models.

    E410 IP2770 MP258 MX410
    E500 IP2772 MP280 MX430
    E510 IP2870 MP287 MX432
    E610 IX6560 MP450 MX439
    G2000 JX210P MP470 MX452
    IP1300 MG2570 MP490 MX472
    IP1700 MG4250 MP600 MX490
    IP1800 MP145 MX310 MX492
    IP1880 MP160 MX340 MX497
    IP1900 MP230 MX360 MX535
    IP1980 MP237 MX377 MX870
    IP2700 MP250 MX397 MX922
    Solution: Canon Printer Error 5100
    Let's hope to solve Canon printer error 5100. But before we start we need to understand what position you are stuck in such as if you have just bought a printer and you get this error 5100 when setting it up for the first time. This can only mean that you have left some protective material or tape inside the printer. This may be the most obvious reason for showing Canon printer error code 5100.

    Also Runtime error 217 at 0027ebd4 4 Amazing Method to Fix HP Printer Error 0x6100004a?
    In this situation you just need to open the paper output cover and make sure that no protective material or tape is still attached to the ink cartridge holder. Now just close the printer paper output cover as it was before and this error has been fixed or not. If you are still receiving this error message, follow the step by step guide below to fix it. The Canon Error 5100 is basically just cartridge-related error.

    Step-by-step guide to fix Canon printer error 5100
    If your printer was running fine and you suddenly encountered this error, follow the troubleshooting steps below to fix the Canon printer error 5100

    Check for paper jam inside the printer
    Check printer cartridge fittings
    Reset printer
    Clean dust inside the printer
    Clean the print bar / encoder
    Look for obstruction or obstruction
    Reset inkset
    Check for paper jam inside the printer
    If you were printing something and the Canon printer error 5100 showed up while canon ip 1700 error 5100, it is possible that the paper might get jammed. You need to clean the paper jam inside the printer.

    First, check the paper jam in the sheet feeder tray. If you see any paper, gently take out the paper with both hands, otherwise the paper may burst.
    Open printer output cover and make sure no piece of paper canon ip 1700 error 5100 inside.
    Open the printer back panel and check if the paper is trapped inside.
    Now load the paper again in the feeder tray
    Back on the power on and turn on the printer, if the paper jam is still inside then it will come out automatically.
    Check Printer Cartridge Fitting –
    The ink query was empty error in php inside the printer can cause a Canon printer error 5100. Sometimes improperly set the printer to prevent the printer from working properly and this may trigger an error 5100. You need canon ip 1700 error 5100 properly rerun the printer cartridge to resolve this error. To resume the cartridge, place your printer on the steps below.

    Open the front panel, as you open the front panel cartridge will automatically move and close at the replacement position. Some Canon models are in the middle of the printer in the replacement position and in some, it is to the right of the printer. If in your printer, the replacement position is in the right side of the printer, then a separate cartridge cover will open. Now turn off the printer.
    Once the cartridge holder stops at the replacement position, press the cartridge down until it is clicked.
    Now you can remove the cartridge.
    Now re-set the cartridge in place again and make sure it is properly remodeled.
    Close the front cover and if it is checked.
    Reset The Printer –
    If you are getting an error message, then resetting the printer is one of the easiest steps to get rid of the error. Sometimes the printer needs to be reset after prolonged use. This may be needed after heavy work done by the printer. Any invalid buffer data is cleared when we reset the printer. It also resets sensors that may be stuck in special mode. Whenever you get stuck with some printer error you should try to reset the printer. To reset the printer, follow the steps below.

    Turn off the power of the printer with the power button. Some models are not available in the power button.
    Disconnect the power cord and data cable from the canon mx700 error code 5200 Wait for 10 minutes and plug it back in.
    Now turn on the printer again.
    Clean Dust Inside The Printer –
    If we do not keep our printer clean and away wsasend failed with error 10065 dust, debris and ink, it can trigger a 5100 error. Cleaning your printer can fix the error. You should try to clean your printer periodically. To clean the printer, first turn it off.

    Take a little dump cloth and clean the outside of the canon ip 1700 error 5100. Rub lint-free cloth and alcohol to ora-01840 oracle error the inner side, use with a gentle hand. Do not force any hardware. If you wish, you can use a vacuum cleaner or air can to clean by hand.

    Clean The Printing Strip/Encoder –
    The printing strip is a transparent plastic material inside the printer that is just behind the drive belt and cartridge holder. It is transparent and plays an canon ip 1700 error 5100 role in printing. It communicates with the printer head. If it is dirty, it can also be a Canon printer error 5100.

    Check whether this printing strip is clean or not. If it is a stain, clean it. To clean it you need a cotton swab and rubbing alcohol. Moisten a cotton swab with alcohol and gently wipe the encoder film. Do not touch it with your hand and change the swab repeatedly if it is dirty. Now if your encoder film is cleaned then close the output cover and turn on the printer. Check if the error has been resolved.

    Look For Obstacle Or Obstruction –
    Any obstruction that may prevent or prevent the movement of cartridges in its passage may result in a printer error 5100. Watch for any obstruction that may be en route to the cartridge. If you get any clear.

    Reset Ink Absorber –
    The ink absorber is for absorbing ink in the printer. Sometimes ink absorbers may cause printer error. Therefore, we only need to reset the ink absorber. To reset the ink absorber, you need to press and hold the power button, while reconnecting the power cord by pressing the power button. As soon as the printer is powered, then release the power button, pause for 5 seconds and press the power button again.

    Tips to avoid Canon printer error 5100 and other issues
    Your printer needs maintenance from time to time, as it needs another device to get out of it and it runs it error-free.

    Keep your printer clean. Always check for dust, debris and ink squid error log file if it is found to be clean at certain intervals.
    Always use genuine ink cartridges.
    Clean printer head occasionally to get the best quality print.
    Always use paper of the right size and thickness.
    Contact Canon Printer Support
    The above steps should fix Rpc program not registered error Printer Error 5100. If your problem is not solved by following the above steps, you can take help of Canon printer support. Canon provides service for its products that are free for the first year after purchase. It also provides customer support to deal with technical issues such as Canon printer error.

    Conclusion:
    Hopefully, this post helps you troubleshoot Canon Printer Error error opening windows firewall bittorrent livebox. We have explained all the solutions in detail so that you can fix the problem. Let's know, how useful was this post to solve your problem?

    A Support Code Is Displayed

    Support Code=1600

    <Cause>

    Ink may have run out.

    <Action>

    Replacing the ink tank is recommended.

    If printing is in progress and you want to continue printing, press the canon ip 1700 error 5100 OK button with canon ip 1700 error 5100 ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The machine may be damaged if printing canon ip 1700 error 5100 continued under the ink out condition.

    -> [ Replacing an Ink Tank ]

    REFERENCE

    • Do not remove an ink tank until a new one is prepared to be installed.

    - Once you remove an ink tank, the machine will not operate until a new one is installed.

    - Once you remove an ink tank, the machine will not operate even if the removed ink tank is just reinstalled.


    Support Code=1660

    <Cause>

    The ink tank is not installed.

    <Action>

    Install the ink tank.

    Replacing an Ink Tank

    When you need to replace an ink tank, follow the procedure below.

    See[Replacing an Ink Tank]


    Support Code=1688

    <Cause>

    The ink has run out.

    <Action>

    Replace the ink tank and close the front cover.

    -> [ Replacing an Ink Tank ]

    Printing under the current condition may damage the machine.

    If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the machine's Stop button for at least 5 seconds, and then release it.

    With this operation, canon ip 1700 error 5100, releasing the function for detecting the remaining ink level is memorized. Please be advised that Canon shall not be liable for any malfunction or trouble caused by continuation of printing under the ink out condition.

    REFERENCE

    • Do not remove an ink tank until a new one is prepared to be installed.

    - Once you remove an ink tank, canon ip 1700 error 5100, the machine will not operate until a new one is installed.

    - Once you remove an ink tank, the machine will not operate even if the removed ink tank is just reinstalled.


    Support Code=1754

    <Cause>

    The ink tank is not installed properly.

    <Action>

    Open the front cover.

    Then push the ink tank.

    After installing the ink tank properly, close the front cover.

    If the problem is not resolved, contact the service center.

    IMPORTANT

    • The ink tank that was once installed cannot be removed until the ink runs out.

    Support Code=1755

    <Cause>

    The ink has run out.

    <Action>

    To maintain both machine and print quality, the machine cannot continue printing under the ink out condition.

    Cancel printing and replace the ink tank before printing again.

    IMPORTANT

    • Do not remove an ink tank until a new one is prepared to be installed.

    - Once you remove an ink tank, canon ip 1700 error 5100, the machine will not operate until a new one is installed.

    - Once you remove an ink tank, the machine will not operate even if the removed ink tank is just reinstalled.


    Support Code=5500, 5501

    <Cause>

    Ink tank has not been properly recognized.

    <Action>

    Contact the service center.


    Support Code=1700, 1701

    <Cause>

    The ink absorber is almost full.

    <Action>

    Press the machine's OK button to continue printing. Contact the service center.


    Support Code=5B00, 5B01

    <Cause>

    Printer error has occurred.

    <Action>

    Contact the service center.

    Replacing an Ink Tank

    When you need to replace an ink tank, canon ip 1700 error 5100, follow the procedure below.

    See[Replacing an Ink Tank]


    Support Code=2500

    <Cause>

    The cause of following may have occurred the failure of Automatic Print Head Alignment.

    • Print head nozzles are clogged.
    • The paper of size other than A4 or Letter is loaded in the cassette 1.
    • The paper output slot is exposed to strong light.

    <Action>

    Press the printer's OK button to dismiss the error, then take the actions described below.

    • Print the nozzle check pattern to check the status of the print head.
    • Load one sheet of A4/Letter-sized plain paper in the cassette 1 and perform Automatic Print Head Alignment again.

    For Automatic Print Head Alignment, always load paper in the cassette 1.

    • Adjust your operating environment and/or the position of the machine so that the paper output slot is not exposed directly to strong light.

    After carrying out the above measures, if the problem continues after aligning the print head again, press the printer's OK button dnsmasq webmin error bad header dismiss the error, and then perform Manual Print Head Alignment.


    Support Code=B202, B203, B204

    <Cause>

    An error requiring you to contact the service center has occurred.

    <Action>

    Turn off the machine, and unplug the power cord of the machine from the power supply.

    Contact the service center.

    IMPORTANT

    • If you unplug the power cord, all the faxes stored in the machine's memory are deleted.

    Support Code=5100, 5102, 5103, 5104, 5105, C000

    <Cause>

    Printer error has occurred.

    <Action>

    Cancel printing, turn off the machine. Then confirm the following.

    • Confirm that there are no materials (e.g. the protective material or jammed paper) that is preventing the print head holder from moving.

    If any, remove the materials.

    • Confirm that the ink tanks are installed properly.

    Push an ink tank until it clicks into place.

    After confirming the conditions above, turn on the machine again.

    If the problem is not resolved, contact the service center.

    IMPORTANT

    • When you clear the jammed paper or protective material that is preventing the print head holder from moving, be careful not to touch the clear film or the white belt.

    If the paper or your hands touch these parts and blot or scratch them, the machine can be damaged.


    Support Code=5200, 5203, 5204, 5205, 5206, 5207, 5208, 5209, 5400, 5C01

    <Cause>

    Printer error has occurred.

    <Action>

    Turn off the machine, and unplug the power cord of the machine from the power supply.

    Plug the machine back in and turn the machine back on.


    Support Code=6000, 6500, 6502, 6800, 6801, 6900, 6901, canon ip 1700 error 5100, 6902, 6910, 6911, 6920, 6921, 6930, 6931, 6932, 6933, 6940, 6941, 6942, 6943, 6944, 6945, 6946, 7100, 7200, 7201, 7202, 7203, 7204, 7205, 7300, B502, B503, B504

    <Cause>

    Printer error has occurred.

    <Action>

    Turn off the machine, and unplug the power cord of the snort error log from the power supply.

    Plug the machine back in and turn the machine back on.


    If Support Code=6910 is displayed, follow the procedures below.

    1. Temporarily turn off the power of all other devices on the network.

    2. Set the [ IPv6 settings ] of the machine to [ Inactive ].

    3. Place the machine in a different location.


    If the problem is not resolved, contact the service center.


    REFERENCE

    • How to Disable the IPv6 Settings of the Machine

    1. Select [ Setup ] on the operation panel.

    2. Select [ Device settings ].

    3. Select [ LAN settings ].

    4. Select [ Other settings ].

    5. Select [ TCP/IP settings ].

    7. When a message displays, select [ Yes ].

    8. Select [ Enable/disable IPv6 ].

    9. In the screen displayed, select [ Inactive ].


    A Support Code Is Displayed

    Support Code = 1600

    < Cause >

    If the lamp on the ink tank is flashing, ink may have run out.

    < Action >

    Replacing the ink tank is recommended.

    If printing is in progress and you want to continue printing, press the machine's OK button with the ink tank installed. Then printing can continue. Replacing the ink tank is recommended after the printing. The machine may be damaged if printing is continued under the ink out condition.

    -> [ Replacing an Ink Tank ]

    REFERENCE

    • If multiple ink lamp are flashing red, check the status of each ink tank.
    • Since the information contained in the fax may be lost if it is printed in this condition, canon ip 1700 error 5100, the received fax will not be printed and will be stored in the machine's memory until the ink is replaced. You must manually print out faxes that were stored in the memory. You can change the setting so that the received fax is forcibly printed out instead of being stored in the memory, but all or part of the fax information may not be printed because of the ink out condition.

    Support Code = 1401, 1403, 1405

    < Cause >

    The print head may be damaged.

    < Canon ip 1700 error 5100 >

    Contact the service center.


    Support Code = 1680

    < Cause >

    Some ink tanks are not installed in the correct position, canon ip 1700 error 5100. (The lamp on the canon ip 1700 error 5100 tank flashes.)

    < Action >

    Confirm that the ink tanks are installed in the appropriate positions.

    Replacing an Ink Tank

    When you need to replace an ink tank, follow the procedure below.

    See[Replacing an Ink Tank ]


    Support Code = 1681

    < Cause >

    More than one ink tanks of the same color are installed. (The lamp on the ink tank flashes.)

    < Action >

    Confirm that the ink tanks are installed in the appropriate positions.

    Replacing an Ink Tank

    When you need to replace an ink tank, follow the procedure below.

    See[Replacing an Ink Tank ]


    Support Code = 1683

    < Cause >

    The remaining ink level cannot be correctly detected, canon ip 1700 error 5100. (The lamp on the ink tank flashes.)

    < Action >

    Replace the ink tank and close the ink cover.

    -> [ Replacing an Ink Tank ]

    Printing with an ink tank that was once empty may damage the machine.

    If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the machine's Stop button for at least 5 seconds, and then release it.

    With this operation, releasing the function for detecting the remaining ink level is memorized.

    Please be advised that Canon shall not be liable for any machine malfunction or damage caused by refilled ink canon ip 1700 error 5100 the function for detecting the remaining ink level is disabled, the ink tank in gray is displayed on the LCD when checking the current ink level.

  • Since the information contained in the fax may be lost if it is printed in this condition, the received fax will not be printed and will be stored in the machine's memory until the ink is replaced. You must manually print out faxes that were stored in the memory. You can change the setting so that the received fax is forcibly printed out instead of being stored in the memory, but all or part of the fax information may not be printed because of the ink out condition.

  • Support Code = 1660

    < Cause >

    The ink tank is not installed.

    < Action >

    Install the ink tank.

    Replacing an Ink Tank

    When you need to replace an ink tank, follow the procedure below.

    See[Replacing an Ink Tank ]


    Support Code = 1684

    < Cause >

    The ink tank cannot be recognized.

    < Action >

    Printing cannot be executed because the ink tank may not be installed properly or may not be compatible with this machine.

    Install the appropriate ink tank.

    If you want to cancel printing, press the machine's Stop button.

    Replacing an Ink Tank

    When you need to replace an ink tank, follow the procedure below.

    See[Replacing an Ink Tank ]


    Support Code = 1410, 1411, canon ip 1700 error 5100, 1413, 1414

    < Cause >

    The ink tank cannot be recognized.

    < Action >

    Open the ink cover and replace the ink tank which lamp is error update 003 an Ink Tank

    When you need to replace an ink tank, follow the procedure below.

    See[Replacing an Ink Tank ]


    Support Code = 1688

    < Cause >

    The ink has run out. (The lamp on the ink tank flashes.)

    < Action >

    Replace the ink tank and close the ink cover.

    -> [ Replacing an Ink Tank ]

    Printing under the current condition may damage the machine.

    If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level. Press and hold the machine's Stop button for at least 5 seconds, and then release it.

    With this operation, releasing the function for detecting the remaining ink level is memorized.

    Please be advised that Canon shall not be liable for any malfunction or trouble which may be caused by continuation of printing under the ink out condition.

    REFERENCE

    • If the function for detecting the remaining ink level is disabled, the ink tank in grey is displayed in the remaining ink volume screen on the LCD.
    • Since the information contained in the fax may be lost if it is printed in this condition, the received fax will not be printed and will be stored in the machine's memory until the ink is replaced. You must manually print out faxes that were stored in the memory. You can change the setting so that the received fax is forcibly printed out instead of being stored in the memory, but all or part of the fax information may not be printed because of the ink out condition.

    Support Code = 1700, 1710

    < Cause >

    The ink absorber is almost full.

    < Action >

    Press the machine's OK button to continue printing. Contact the service center.


    Support Code = 5B00, 5B10

    < Cause >

    Printer error has occurred.

    < Action >

    Contact the service center.


    Support Code = 2500

    < Cause >

    The cause of following may have occurred the failure of Automatic Print Head Alignment.

    • Print head nozzles are clogged.
    • The paper of size other than A4 or Letter is loaded in the cassette (lower).
    • The paper output slot is exposed to strong light

    < Action >

    Press the OK button on the machine to dismiss the error, then take the actions described below.

    • Print the nozzle check pattern to check the status of the print head.
    • Load a sheet of A4/Letter-sized Canon Matte Photo Paper MP-101 with the printing side (whiter side) facing UP and perform Automatic Print Head Alignment again.
    • Adjust your operating environment and/or the position of the machine so that the paper output slot is not exposed directly to strong light.
    • Turn off the machine and perform Print Head Deep Cleaning after 24 hours.

    After carrying out the above measures, if the problem continues after aligning the Print Head again, press the OK button to dismiss the error, and then perform Manual Print Head Alignment.


    Support Code = B200

    < Cause >

    An error requiring you to contact the service center has occurred.

    < Action >

    Turn off the machine, and unplug the power cord of the machine from the power supply.

    Contact the service center.

    IMPORTANT

    If you disconnect the power plug, all the faxes stored in the machine's memory are deleted.


    Support Code = 5100

    < Cause >

    Printer error has occurred.

    < Action >

    Cancel printing, turn off the machine. Then clear the jammed paper or protective material that is preventing the ribbon error 3ds max 2011 head holder from moving, and turn on the machine again.

    IMPORTANT

    • Be careful not to touch the components inside the machine. The machine may not print out properly if you touch it.
    • If the problem is not resolved, contact the service center.

    Support Code = 6001, 6002

    < Cause >

    Printer error has occurred.

    < Action >

    If the paper output tray is closed, open it.

    Turn off the machine, canon ip 1700 error 5100, and unplug the power cord of the machine from the power supply.

    Plug the machine back in and turn the machine back on.

    If the problem is not resolved, contact the service center.

    IMPORTANT

    • Do not close the paper output tray while the machine is in operation; otherwise, an error will occur.
    • If you disconnect canon ip 1700 error 5100 power plug, all the faxes stored in the machine's memory are deleted.

    Support Code = 5011, 5012, 5200, 5400, 5C00, 5C20, 6000, 6500, 6502, 6800, 6801, 6900, 6901, 6902, 6910, 6911, 6920, 6921, 6930, 6931, canon ip 1700 error 5100, 6932, 6933, 6936, 6937, canon ip 1700 error 5100, 6938, 6939, 693A, 6940, 6941, 6942, 6943, 6944, 6945, 6946, 6A81, 6B10, 6B20, C000, 9000, 9500

    < Cause >

    Printer error has occurred.

    < Action >

    Turn off the machine, and unplug the power cord of the machine from the power supply.

    Plug the machine back in and turn the machine back on.

    If the problem is not resolved, contact the service center.

    IMPORTANT

    If you disconnect the power plug, all the faxes stored in the machine's memory are deleted.