Bios application error 501 vista

bios application error 501 vista

hardware, drivers, software or BIOS update to Status lights, blinking light codes, troubleshooting lights, and POST error messages. Turn on the computer and enter the wrong password three times. This will lock the computer and display a "System Disabled" message. Don't worry, when you. He attempted a safe start, but it failed and gave him a Bios Application Error He tried to restart the computer, but it hangs on the.

Bios application error 501 vista - idea brilliant

How to Fix a CMOS Checksum Error

A CMOS Checksum error is a conflict between the CMOS (Complementary Metal Oxide Semiconductor) and BIOS (Basic Input Output System) that happens when you boot up a computer. It occurs when the computer isn't able to read startup information or the data does not match up.

In this guide, we explain what causes a CMOS Checksum error and offer instructions for troubleshooting and fixing the problem.

Causes of CMOS Checksum Errors

There are several potential reasons for a CMOS checksum error, but almost all come back to the information on the CMOS being corrupt for one reason or another.

Before an operating system boots, the computer's motherboard handles many lower-level tasks, preparing the system components to run and eventually handing those tasks off to the operating system. The software on the motherboard is called the BIOS. In addition to booting up a computer, the BIOS contains several settings for its hardware, like speeds, voltages, system time, and boot priorities. The BIOS settings aren't saved on the hard drive. They're on a chip called the CMOS.

Whenever you make changes to the BIOS settings, start your computer up, or shut it down, those events are written to the CMOS. It keeps track of the data to make sure that things run normally the next time you start the computer. The CMOS stays on while the rest of the computer is off because it's powered independently by a watch battery. When the computer starts, it reads the state it was last in from the CMOS. Usually, it can read the information and restore itself without an issue. A CMOS Checksum error occurs when the computer isn't able to read that information.

One of the more common causes of a checksum error is also the simplest to solve. The battery that powers the CMOS is a watch battery, and it can run out of power. When the battery is dead, the CMOS can't store information anymore.

Power surges and sudden losses of power are other causes. If a computer doesn't have a chance to write information to the CMOS before it's abruptly powered off, it has a hard time picking up where it left off. Power surges can also cause corruption or hardware damage.

The final cause is less common, but it can happen. If the BIOS is damaged or corrupted, it will cause a mismatch between the BIOS and CMOS. It's uncommon but possible for a virus to infect and corrupt the BIOS. Still, it's more common that a BIOS update failed or the operating system updated something which caused it to get out of sync with the BIOS.

How to Fix CMOS Checksum Errors

While it is not always possible to fix a CMOS checksum error, especially in the case of hardware damage, the fix is usually simple. Follow these steps, in order, to resolve the error.

  1. Restart the computer. A normal restart usually creates a new checksum and eliminates the error. An error lingering after a normal restart requires some more work.

  2. Download and flash a BIOS update. Download the update from the motherboard manufacturer's website. Many motherboards can download an update from within the BIOS while they're plugged into your network using an Ethernet cable.

  3. Reset the BIOS. Some motherboards have a switch either on the board or on the back of the computer to reset the BIOS settings. If there isn't a switch like that, remove the CMOS battery from your system for a minute or two. The loss of power causes everything in the CMOS to reset.

  4. Replace the CMOS battery. If the cause is a dead battery, all you need is a new one. The CMOS battery is located on the computer's motherboard. On desktops, it's easy to get to, and it's only held in place with a metal clip. On laptops, you'll need to open the machine up to get to the motherboard, and that might be better left to a professional.

  5. Consult a technician or computer repair expert. If all of the above fail, the problem may be due to hardware damage. Before you buy a new motherboard or recycle the machine, have a professional check it out to be sure.

FAQ

  • A checksum is an algorithm used in many programs to confirm the integrity of a file. This is used frequently in downloaded programs to confirm the file hasn't been tampered with or corrupted.

  • Try using WinZip to repair the file. To do this, right-click on the file and select Extract file. Next, go to Miscellaneous and place a checkmark next to Keep Broken Files then choose an extraction location and select OK.

Thanks for letting us know!

Get the Latest Tech News Delivered Every Day

Subscribe

Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error ().

  • Unable to save the family settings, error: the system cannot find the specified file error code.

    Original title: Family Safety filter configuration problem.

    Hello.

    I got family safety works very well before a reinstall of Windows 7 Professional.  After I install windows essentials, I connect to my microsoft account, now I'm trying to set up the filter, monitored accounts are already checked, the only option is to save.

    When I click Save I get this

    The system cannot find the specified file error code.

    I've tried everything.  Uninstall, reinstall Windows Essentials   First of all, I did a partial install with just the film and the family.  Uninstalled.  Re-installed full.  Always the same question.  I even tried to install Windows Essentials   No change.

    Help, please.  I appreciate it.

    Thank you

    GISIGER

    Hi Greg,.

    Thanks for the reply.

    Run the System File Checker tool.

    Use the System File Checker tool to repair missing or corrupted system files

    sprers.eu

    Also reset Windows update components and check if this solves the problem.

    Refer to this link:

    sprers.eu

    Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

    Keep us informed on the status of the issue.

  • When I try to download the updates I get error Code B & error Code 66

    Original title: I Keep Getting error B


    When I try to download the Dates, I get error Code B & error Code 66

    Hey, Joe Zerilli,

    1. you remember to make changes to the computer before this problem?

    Step 1:

    You can check the following link and try to run the system update readiness tool and check:

    Windows Update error b

    sprers.eu

    Step 2:

    You can also read the following article and try to reset the Windows Update components and check.

    How to reset the Windows Update components?

    sprers.eu

    Hope this information is useful.

  • How can you save your illustration in Photoshop CC as PNG or JPEG file when it does not give the option?

    How can you save your illustration in Photoshop CC as PNG or JPEG file when it does not give the option?

    Thank you for your time and help in advance.

    Thanks for the reply. I have actually managed to do work. I had my work instead of 16 or bit/channel value. Once I changed it to bit/channel, he gave me the possibility to register under the registered name. Thanks again.

  • I bought dreamwever, but the system gives me the option to download the trial version

    Yesterday I bought dreamwever, but the system gives me the option to download the trial version.

    HOE I do?

    Thank you

    Alfredo

    Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  • When you try to install thecreative cloud without error 1. What is the problem?

    When you try to install thecreative cloud without error 1. What is the problem?

    Error code 1: "unable to install". Creative Cloud Desktop: sprers.eu

  • Firefox crashes when loading websites, freezes when I try to download any file and completely freezes when I try to access the Options menu. Help!

    As he says, I had a difficult time with Firefox lately, and I think that it's corrupted. I tweaked the settings according to the suggestions on this forum and others like him, but they made the problem worse. I've updated to the latest version of the browser that has not helped, and I finally tried the "Reset Firefox" button, which was worse than anything. I lost my custom settings and Add-ons for nothing, the problem persists.

    More frustrating is that it completely crashes whenever I click on tools > Options, so I'm not able to make changes to this new configuration. If I export my favorites safely, I will try to uninstall the browser and re - install an older version of it, but of course it now freezes when I try to export the bookmarks file.

    Thus, apart from trashing it and starting over any suggestions?

    For the record, it's Firefox (do not know what version it was the beginning of the sentence), and the window "On Firefox" said that it is up-to-date. I am running Windows XP.

    Thanks for any help or enlightenment, you might be able to provide.

    Hello

    Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from sprers.eu office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:
        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    More information on the resettlement of Firefox can be found here.

    WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

    Please report back to see if this helped you!

    Thank you.

  • When I try to access the Bluetooth program, receive error message: "Windows has stopped this program due to a Code 43 error.

    Original title: Code43 error (built-in) Bluetooth

    I have a new laptop (vaio) when I try to access the Bluetooth program I received information that Windows has stopped this program error Code 43

    that I understand not as a problem to update. I am running Windows7 Home Premium SP1. All solutions? (outside the deactivation, which I did. I realized the usual remedies IE. checked for driver updates, uninstalled and restarted without result

    Hi DerekWilliams,

    What is the brand and model of your system?

    You can try the following steps and check if it helps:

    Method 1:

    Try to run the corner hardware store and check the issue.

    Convenience hardware store

    For more information, see the article:

    Code Windows has stopped this device because it has reported problems

    Method 2:

    You can refer to the computer or the device manufacturer's Web site and try to install the latest version of the Bluetooth drivers:

    For more information, see the articles:

    Updated a hardware driver that is not working properly

    Update drivers: recommended links

  • Hi, trying to fix my eyedropper in AE CS5. Whenever I click it crashes. Also when I try and perform the updates keep an error saying I need to reinstall but I ain't a disc

    Help, please!

    El Capitan Mac i7 16 gb mhz Intel HD MB

    CS 5 Master

    After Effects: Eyedropper tool causes the program crash.

    All programs do not update error: Adobe After Effects CS5 has been moved or deleted incorrectly. Please start or reinstall the application to update the location and try again. To remove the product from the system, uninstall the product using the alias in "/ Applications/Utilities/Adobe installers.

    Help, please

    using the vacuum after you uninstall and reinstall is often necessary

    -sprers.eu

    Download & install instructions sprers.eu can help

    -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

    -you will need to enter your original serial number during the installation for non-Cloud programs

    - or kglad links in response to #1 here can help sprers.eu

    Also go to sprers.eu

    - and also read sprers.eu

    CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

    -which means you are trying to use CS6 and earlier at YOUR risk of having problems

    This information is a MUST to install old programs on Mac El Capitan

    -You can't get the same error message, but here are some links that CAN help with old programs

    Install CS5 on Mac sprers.eu can help (also for others than CS5)

    -also a TEMPORARY security change sprers.eu

    -sprers.eu s-mac-os-x /

    -the guardian sprers.eu

  • I have a problem when trying to choose from the option menu bar

    I have problem with mozilla since the last update. When try to use one of the options from the menu bar, this appears:

    sprers.eu

    Also, I downloaded the video to show how my problem appears.

    sprers.eu?v=shZGaZ0-_po

    Hello srga90, you can go to firefox > help > troubleshooting information and copy the contents of the graphic section and paste it here? thnx

    Does make a difference if you try to update your video driver or disable hardware acceleration in firefox > options > advanced > General?

  • How to encrypt files in Windows Vista when it only gives me the option to encrypt it?

    Nice day.

    I use an edition of Windows Vista Edition Home Premium and my problem is, it wont let me encrypt my files. The option encrypt my files is "gray" it won't let me select the check box.

    Here's what I did:

    1. place all the files I want encrypted in a folder.

    2. I right click the folder, and then click "Properties".

    3. I click on "Advanced".

    4. in the menu 'Attributes' advanced, it doesn't let me check the "Encrypt contents to secure data".

    If there is someone who could help me in this problem, I am grateful gladly.

    Thank you in advance.

    Encryption of files is not included in Vista Home Premium. It is only in Vista business, full and firm.

    You can use a third-party product like TrueCrypt sprers.eu

  • When I try to open the window Defender, an error message appears

    The error message that stays up for about 3 seconds and said something as "defender of the window may not protect your computer from viruses". "but I can't read more because it goes too fast. I tried to scan my computer several times with Symantic Endpoint Protection & he finds no viruses, but I'm sure that there is something on my computer because whenever I open something on Google, without having to open a new tab, need me the site of evil/a completely random. Defender of the window is the only commodity virus on my computer that recognizes there is a virus, but it does not, is there a way to open it?

    If there is a virus on your system, you will need to clean it up before starting the Defender, the virus has probably disabled it. Go to sprers.eu and download the installation of the free version and update the program and then run a full scan of the system. This should get your system clean unless the virus also disables Malware bytes. I would like to know if you can install and run Malware bytes.

    I hope this helps.

    JB

  • When you try to add the option "number of words" for the column headings in the window my documents, the number of words doesn't quite show

    For school, I need to take a screenshot of the header of column of count of Word showing under my documents.
    When I added the option to account for Word for column headers and clicked it twice so that the word count
    show for files listed, nothing shows up.

    Any help with this would be greatly appreciated!

    Hello

    Welcome to the Microsoft Community and thanks for posting the question.

    According to the description, you are having problems with the number of words not displaying do not.

    What is the format of the Document?

    Number of words is a feature that is available only for Documents Word from Microsoft.

    sprers.eu

    Meet us if you encounter problems with the number of words or any other issue of Windows, and we would be happy to help you.

    Good day!

    Hope this information helps.

  • How you include the doctype in Application.cfc?

    I am trying to convert an sprers.eu file and in the cfm file, I got the following:

    <! - set the content type to ISO, otherwise the default is UTF - 8->
    < cfcontent type = text/html"; charset = ISO ">"

    <! - set the doctype for all documents - >
    < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML Strict / / IN" "sprers.eu" > ""
    " < html xmlns ="sprers.eu">

    I think I put the cfcontent in the SystemFramework function as well as other application variables.  No matter what I do, nothing happens the doctype to appear on the pages. Where do you put that in the SWC file?

    Thank you!

    Holli

    If you want the OUTPUT of the OnRequestStart function, you must use OnRequest() and include the generated output.

    Really, which means you could probably do all what you want just in the OnRequest method, but which belongs to you.

    It is not that OnRequest() breaks webservices, ajax called ect.  OnRequest runs for ALL applications before the Web service request, ajax calls ect.

    Then, if anything method OnRequest adds content, such as the content of your topic, all applications, including Web services and ajax calls.  % of the time, which added content will break the format and avoid thus the functionality of these web service and ajax requests.

    It is not hard to get around.

    (1) have a smarter onRequest method which includes when he meets the demands of ajax or Web service and not to provide content that will break.

    (2) make your resource webservice and ajax inside a different directory with another sprers.eu file with a different (or no) onRequest method.

    (3) as Adam said, don't put content in your sprers.eu but use any number of other methods to apply this type of standard output to all views.

  • When closing firefox 4.0 with several tabs open, I want to save this configuration when I reopen it firefox. the option to save my installation is now not in the command prompt. only that I am closing of several tabs. How can I do this?

    in the old version of firefox, you invited when you were closing multiple tabs. but you were also given the option to save the current configuration so that when you reopen firefox, this configuration would also reopen. How to make it happen with firefox ? Since I updated to firefox , there is no given obtion to save my current setup.

    You are welcome!

    Please mark this issue as resolved for the benefit of other users. Thank you!

  • Internal Hard Drive Troubleshooter

    Troubleshoot a wide variety of issues, most notably non-detection problems, with your Serial ATA, SATA or SSD drive.

     

    Main Menu
     

    The boot drive is no longer detected
    Drive is not spinning up
    SMART error
    Error Messages
    Check the BIOS
    The Storage drive is no longer detected
    New bootable drive is not detected correctly
    Motherboard Compatibility
    Installing a NEW Storage Drive
    My drive's capacity is lower than I expected
    Noisy Drive



    The Boot Drive is No Longer Detected

    Generally, if a SATA drive is configured as the bootable drive, then the computer relies on that drive to boot the computer and to launch Windows. It is the source of most of the computer's operations. So, if the computer suddenly stops detecting the bootable drive, this will almost certainly mean that the computer will fail to boot at all. Instead, some error message will occur, and it will become obvious that a serious problem has occurred.

    This set of troubleshooting steps will attempt to get the drive detected again, or to conclude whether the drive has failed and should be replaced.

    One error in particular, however, is more important than others to watch out for. If a "SMART error" has recently appeared on your computer, this generally means drive failure is imminent or has already occurred. If you have received a SMART error, we strongly recommend that you stop everything and make an immediate backup of any and all important data contained on this drive that is not already backed up.



    Drive is not spinning up

    Note: These steps are NOT applicable for SSD drives

    If the drive is not receiving power or receiving an incorrect level of power, it will not spin up. To check to see if this is the cause of the BIOS not detecting the hard drive, follow these steps:
     

    1. Power off the computer
    2. Open the computer case and remove the data cable from the hard drive. This will stop any power saving commands from being sent. 
    3. Turn on the system. Check to see if the hard drive is spinning. If you touch the side of the drive you should feel a slight vibration. If you do not hear or feel the hard drive spinning, the drive did not start. 

    If you cannot determine whether the drive is spinning:

    1. Boot the computer and listen carefully.
    2. Shut the computer down.
    3. Disconnect the power cord from the computer itself. 
    4. Disconnect the power cable from the hard drive in question.
    5. Reconnect the power cord to the computer itself. 
    6. Boot the computer up to see if the drive sound was audible before. And, 
    7. Then repeat, only reconnect the hard drive and listen for it to spin up. 
    8. Switch power cables with a device like a CDROM or DVDROM drive so that you are using a known-good power cable.
    9. Check the power supply on your computer to determine whether it is providing sufficient electrical power to operate the drives and devices  you have in your computer. 
    10. If the drive is still not spinning, connect it in another computer if possible.
    11.  Connect the drive in a SATA-USB enclosure or something similar is possible. 
    12. If the drive does not spin up after all of those steps, please visit the Warranty page to begin a warranty replacement order. 



    Back to the top



    SMART error:

    Under what circumstances did the SMART error occur?
     

    After running a SeaTools test:

    SeaTools' PASS or FAIL is the standard that Seagate uses to determine whether a hard drive is still in good working order or is failing. A drive may be failing but continue to function normally for a short time, so SeaTools is often a better judge of whether the hard drive is failing than the drive's functionality at any given moment.

    Therefore, if SeaTools indicates that the drive is failing, Seagate recommends backing up your data immediately and replacing your drive.

    Please see our Warranty Information page for replacement information.


    It appeared suddenly, without warning:

    Each Seagate hard drive engages in regular self-tests, and most computers automatically run regular SMART tests on the hard drive(s) installed on them. SMART tests indicate whether a drive is approaching imminent failure. Thus, if a SMART error appears suddenly, it virtually always means, unfortunately, that the drive is about to fail and should be replaced.


    AnchorA third-party SMART software issued an alert:

    With the backing of personal computer manufacturers, the disk drive industry adopted an analysis system in the 's called Self Monitoring Analysis and Reporting Technology or SMART. The idea then and today is to predict a failure before it happens. Various attributes are being monitored and measured against certain threshold limits. If any one attribute exceeds a threshold then a general SMART Status test will change from Pass to Fail.

    Seagate uses the SeaTools diagnostic software to test the SMART status of the drive. SeaTools does not analyze attributes or thresholds.  As a practical matter, the technology supporting SMART is constantly being improved.  Each new design incorporates improvements that increase the accuracy of the SMART prediction.  As a matter of policy, Seagate does not publish attributes and thresholds.

    Please remember that these third-party programs do not have proprietary access to Seagate hard disk information, and therefore often provide inconsistent and inaccurate results.  SeaTools is more consistent and more accurate and is the standard Seagate uses to determine hard drive failure.



    Back to the top

     


    Error Messages: 

    AnchorBlack screen when Windows is booting

    See Microsoft Knowledge Base Article

     

    Anchor"Delayed write failure" error message

    If you encounter a delayed write failure, please check the following things:

    1. Confirm the cable is firmly connected to the drive.
    2. If the drive cables come loose repeatedly, use locking SATA cables or reposition the drive in the case so that pressure/tautness on the cable is reduced.
    3. If the problem continues, consider replacing your SATA cable.
    4. Confirm you are using the current SATA driver from the manufacturer of your SATA motherboard/controller.
    5. Test the drive using SeaTools Bootable.

     

    Errors from SeaTools

    A FAIL result means two things:

    1. You should make sure your data is completely backed up. If further assistance is needed, please contact Seagate Support for assistance in recovering your data.
    2. You should replace the drive.



    Back to the top
     



    AnchorCheck the BIOS

    The BIOS is a basic status monitor for the state of your computer and its devices.

    Access the BIOS by rebooting the computer and, while it is in the process of booting, before the Windows screen appears, press the key that will open the BIOS. This key will vary by computer make and model, but it is often Escape, Delete, F1, or F2. Consult your computer manufacturer if you are unable to enter the BIOS.

    • Sometimes the reboot will proceed too quickly for you to be able to press the BIOS key in time. In this case, shut down the computer and wait for it to cool a little (probably at least 5 minutes). Then boot the computer again and retry.
    • Most new computers will automatically detect devices through the system setup program (CMOS or BIOS). As the system starts, the auto-detect feature may display the drive model number on screen. Seagate drive model numbers begin with the letters "ST". Some Serial ATA BIOS have a system setup that is not contained within the normal motherboard BIOS. If this is the case, the Serial ATA drive will only be displayed in this Serial ATA BIOS message. Please consult the motherboard or Serial ATA controller documentation for assistance with entering into the Serial ATA BIOS setup.
    • Ensure that the SATA port to which your drive is connected is enabled. If in doubt, enable all SATA ports unless instructed otherwise by the BIOS.

     

    My drive is not detected in the BIOS
    My drive is detected in the BIOS
     

    Most new computers will automatically detect devices through the system setup program (CMOS or BIOS). As the system starts, the auto-detect feature may display the drive model number on screen. Seagate drive model numbers begin with the letters "ST". Some Serial ATA BIOS have a system setup that is not contained within the normal motherboard BIOS. If this is the case, the Serial ATA drive will only be displayed in this Serial ATA BIOS message. Please consult the motherboard or Serial ATA controller documentation for assistance with entering into the Serial ATA BIOS setup.

     

    AnchorIf the drive is not detected in the BIOS

    • Verify Cabling: The cause of non-detection may be faulty cabling. Replace the power cable and the data cable for the drive in question with cables that are known to be in good working order.
    • Connect in a Second Computer (if available)
    • Connect to an External Enclosure (Please verify if the enclosure is compatible with the hard drive).



    Back to the top

     


    AnchorIf the drive is detected in the BIOS

    • Since the drive is detected in the BIOS but has stopped booting correctly, the culprit may be faulty sprers.eue the power cable and the data cable for the drive in question with cables that are known to be in good working order.

    • If the problem persists, the most likely culprit may be a corrupted operating system. In this case, a repair Windows may be necessary.

     Important: If your data is backup up elsewhere and you don't need data recovery, please proceed with the instructions to repair Windows.

     

      Warning: This will very probably erase all data on the drive.

     

    AnchorInsert and boot from your Windows install disc to perform a Windows Repair/Restore.

    1. Disconnect all external storage devices such as external USB, Firewire, and eSATA drives, jump/thumb/flash drives, cameras, and printers before proceeding with a Windows repair or recovery. Failure to disconnect such devices could result in serious data corruption.
    2. Boot up the computer.
    3. Insert your Windows installation CD/DVD into the CD/DVD drive.
    4. Reboot the computer, and it should boot up into the Windows disc.
    5. Select to perform a repair or restore action, and follow the steps provided there.
    6. If the repair or restore fails, the following articles may be of assistance:
    1. If the drive successfully passes the diagnostics (but the Windows repair/recovery failed), then the drive itself is most probably safe to continue using. You should therefore, attempt to erase the drive and reinstall the operating system.

    The simplest way to reinstall the operating system (and probably erase the data, though that does not happen every time) is to insert the Windows CD/DVD in the CD/DVD drive and then reboot the computer. The option to repair Windows should appear as well as an option to reinstall Windows. Since the repair has failed, simply choose to reinstall Windows.
     

    If that fails to reinstall Windows, a stronger erase is probably required. Seagate's utility SeaTools Bootable can perform a quick, a timed, or a Overwrite full erasure (known as a "zero-fill") of the drive. In this case, a full zero-fill is probably the best option. This can take many hours depending on many factors including the drive capacity, so leave adequate time for this. If you are short on time, attempt a timed zero-fill of at least a few minutes.

    Then insert the Windows CD/DVD in the CD/DVD drive and then reboot the computer. You should be able to install Windows as if from scratch.

     

    Back to the top


    When the storage drive is no longer detected

    If a Serial ATA drive, installed as additional storage in your computer, was previously detected but is no longer detected, this set of troubleshooting steps will attempt to get the drive detected again, or to conclude whether the drive has failed and should be replaced.

    If a SMART error has recently appeared on your computer, this generally means drive failure is imminent or has already occurred. If you have received a SMART error, we strongly recommend that you stop everything and make an immediate backup of any and all important data contained on this drive that is not already backed up.

     

    Check the Partition Status
    Lost Partition
    Diagnostics and Reformat
    Reset the Drive Letter

     

    AnchorTo check the partition status, please follow the steps:

    1. Windows 8// Press the Windows key (a) + X and select Computer Management.
    2. Windows 7/Vista/XP: Right-click on (My) Computer and choose Manage.
    3. Select Disk Management.
    4. Locate the storage drive in the lower window. Disk 0 is usually the boot drive. Disk 1 or Disk 2 may be the additional storage drive.

     

    If the drive is detected there and the colored bar to the right is still dark blue (see figure), follow the steps to Reset the Drive Letter.

     

    If the drive is not detected in the lower window of Disk Management at all, please check the BIOS. 

    If your drive is detected there but the colored bar is black (see figure) or some other color means that the partition has become lost.

     

     

    AnchorLost Partition

    A black bar in Disk Management means that the partition has become lost. At this point, we must ensure the safety of your data.

    Is the data on this drive backed up elsewhere, or do you need to try to recover it?

    If you were unable to access the data, please contact Seagate Support for assistance in recovering your data.

     

    If you have data saved elsewhere, proceed with the diagnostics and reformat instructions.

     

    AnchorDiagnostics and Reformat

    Since the data is backed up or you do not need it, we can proceed to diagnostics and reformatting the drive.
     

    Warning:  Formatting the drive will erase all the data on the drive.  
     

    1. Perform a diagnostic on the drive with SeaTools Bootable. See Document ID:  for instructions.

     

    If the drive fails, please begin a warranty replacement order online.

    If the drive passes, reformat the drive using Windows Disk Management.

     
     

    AnchorReset the Drive Letter

    If the drive is no longer detected in (My) Computer / This PC or Windows File Explorer but it is displaying a blue bar in Disk Management, Windows has probably lost track of the drive letter. Please follow these steps:

    • Attempt to perform a checkdisk action on the drive. See Document ID: for instructions.
    • Remove any potential conflicts:
      • Power down the computer.
      • Disconnect all other storage devices, external hard drives, thumb drives, printers, and cameras.
      • Power the computer up again and retry detection.
      • If the drive is detected properly, add the disconnected devices one by one until you find the one that is causing the problem.
      • Re assign devices to unused drive letters to avoid conflicts in the future. See this Microsoft article for instructions.

     


    Back to the top

     

    I am attempting a new installation of a bootable Serial ATA drive in my PC and it is not detected correctly

    Once you connect a new Serial ATA drive in your computer, there remains more to do to get your drive working.

    First of all, often, users want to install a new drive in order to upgrade to a larger hard drive in their computer. This usually means that the user wants to copy all the data from the older hard drive to the newer drive, then install the newer drive as the bootable drive. To upgrade to a new drive, copying your data from the old drive to a new one, see Document ID:

    See also Document ID: for more information on installing drives and Document ID: about the proper drivers in Windows.
     

    Install Windows
    Motherboard Compatibility
    Format the Drive

    Install Windows

    If you are simply going to install a new copy of Windows (the operating system), you first need to format and partition the drive, and then install Windows:

    1. Disconnect all external storage devices such as USB, Firewire, and eSATA drives, jump/thumb/flash drives, cameras, and printers before proceeding with a Windows repair or recovery. Failure to disconnect such devices could result in serious data corruption.
    2. Insert your Windows installation CD/DVD into the CD/DVD drive of your computer.
    3. Power down the computer.
    4. Install the drive physically into the computer.
    5. Boot up the computer.
    6. The Windows installation process should begin, as the computer boots from the installation CD/DVD.
    7. Follow the guidance of the install program.
    8. It will take you through a process of several steps, including partitioning and formatting the drive. You can choose the default setting - one big partition - or choose to partition the drive into multiple different partitions, as you prefer. It will then install Windows.
    9. Once it is complete, it will most probably ask you to remove the CD/DVD and reboot the computer. Once this is done, you should be able to boot into Windows, and the install is complete.
       

    If you correctly installed the drive and it is not detected in the BIOS, please  check motherboard age .



    Back to the top



    Motherboard Compatibility

    Some older computer motherboards are unable to support modern Serial ATA drives.

    If your motherboard only supports SATA1 ( Gbits/sec transfer rate) and you are installing a SATA2 ( Gbits/sec) or SATA3 ( Gbits/sec) drive, the motherboard may not detect the drive. There are four options in that case:

    • Obtain an add-on controller card that can support more modern drives and connect the drive to that card.
    • (For Barracuda drives and older, as well as certain Barracuda models) You can place a jumper on the drive to slow it down to Gbits/sec, so older motherboards can support it.
    • Use an older drive.
    • Update your computer equipment or obtain a newer computer.

    Please make sure if your computer does support SATA2 ( Gbits/sec) drives at least.

    For additional information, please contact the motherboard manufacturer.




    Back to the top



    Installing a NEW Storage Drive

    Once you connect a new Serial ATA drive in your computer as additional storage, there remains more to do to get your drive working.

    First, please see Document ID: for more information on installing drives and Document ID: about the proper drivers in Windows (though if your computer's boot drive is SATA, there should be no need for additional drivers).

    Please proceed formatting the drive.

     

    Format the Drive

    Before the drive can display in (My) Computer/This (PC) or Windows/File Explorer, it must be formatted in Windows. Please see the following articles for instructions:
     

    Instructions in Window 7, 8/ and
     

    Please check the motherboard compatibility if the drive is not detected in the Disk Management application.


    Back to the top



    My drive's capacity is lower than I expected

    If your drive is larger than 2 Terabytes, please see Document ID:

    If your drive is otherwise displaying a lower capacity than you believe was advertised, please see Document ID:  for all relevant information.


    Back to the top



    Noisy Drive

    Abnormal noises include:

    1. High-pitched whining sound can be an indication of abnormal function.
    2. Noises can be caused by mounting issues. This is due to either a high-frequency vibration in the mounting hardware or a potential drive failure.
    3. Repeated, regular tapping, grinding or beeping.
    4. Seagate hard drives do not contain audio speakers. Some failure mechanisms may make a regular repeating beep from the computer's internal speaker. This may or not be hard drive related. Check your system documentation for an explanation of system beep codes. If a drive failure is possible, it is always important to make an immediate backup.
    5. Two hard clicks at start up and then a boot error message or system shutdown is a symptom of a failed drive.  Check your cables and connections in case they might have gotten loose. You can use SeaTools Bootable to diagnose the drive. If SeaTools fails to function properly or is unresponsive, replace the drive.


     


    Back to the top

    Answer

    Hi,

    Here are all the methods specifically for Windows 7 (no real difference) :

    References to Vista also apply to Windows 7.

    See if these help - boot with a Windows disk (repair disk ok) and issue these from the Command
    Prompt and hit ENTER after each.

    Setup/Setting (BIOS/CMOS) often F2 as you boot so watch the screen - set to CD/DVD drive first
    in the boot order - remember to set back when done. (Some use F12 or other keys for a one time
    boot order change.)

    C:

    bootrec /fixmbr

    bootrec /fixboot

    bootrec /scanos

    bootrec /rebuildbcd

    How to repair MBR on Windows 7
    sprers.eu

    How To: Repair And Restore Windows Vista Master Boot Record (MBR)
    sprers.eu

    This KB tells how to use /FixMbr and /FixBoot and other options

    How to use the sprers.eu tool in the Windows Recovery Environment to troubleshoot and repair
    startup issues in Windows. This also applied to Windows 7
    sprers.eu

    If those help then run StartUp Repair THREE times - run once and then reboot and run again
    - repeat
    . (Use a Windows 7 disk.)



    Using EasyBCD often works when other methods do not. <-- if Bootrec did not help use this.

    Recovering the Vista or Windows 7 Bootloader from the DVD
    sprers.eu+the+Vista+Bootloader+from+the+DVD

    Recovering the Vista Bootloader with EasyBCD (Windows 7)
    sprers.eu+the+Vista+Bootloader+with+EasyBCD

    Repairing the Windows Vista Bootloader (Windows 7)
    sprers.eu+the+Windows+Vista+Bootloader

    If those help then run StartUp Repair THREE times - run once and then reboot and run again
    - repeat
    . (Use a Winodows 7 disk.)

    How to Run a Startup Repair in Windows 7
    sprers.eu



    If you need to make repair disks - these help repair Windows not re-install.
    Often these disks will help when the OEM Recovery Disk does not.

    Download Windows 7 System Recovery Discs - now charging $ for the ISO
    images to make the disks. (These can be made on any computer running XP,
    Vista, or Window 7 that has a CD/DVD burner.)
    sprers.eu

    How to Create a Windows 7 System Repair Disc - Free (Must be made on a
    Windows 7 computer running the same 32 or 64 bit.)
    sprers.eu

    A Installation Disk can also be made to use for Repair. Of course you would use your own
    COA (Product Key).

    Windows 7 (English) with Service Pack 1

    • Windows 7 Home Premium (x86) - X

    • Windows 7 Home Premium (x64) - X

    • Windows 7 Professional (x86) - X

    • Windows 7 Professional (x64) - X

    • Windows 7 Ultimate (x86)* - X

    • Windows 7 Ultimate (x64)* - X


    See MVP Andre Da Costa's message in this thread.

    sprers.eu

    ======================================

    If needed :

    What to do if Windows won't start correctly
    sprers.eu 

    How to Boot to the System Recovery Options in Windows 7
    sprers.eu

    What are the system recovery options in Windows 7?
    sprers.eu

    A Repair Installation allows you to keep the programs and data though redundant backups
    are always a good idea.

    How to Do a Repair Install to Fix Windows 7
    sprers.eu

    Hope this helps.


    Rob Brown - Microsoft MVP <- profile - Windows Expert - Consumer : Bicycle - Mark Twain said it right.

    Rob Brown - past Microsoft MVP - Windows Insider MVP -
    Microsoft MVP Windows and Devices for IT -

    Report abuse

    Harassment is any behavior intended to disturb or upset a person or group of people. Threats include any threat of suicide, violence, or harm to another. Any content of an adult theme or inappropriate to a community web site. Any image, link, or discussion of nudity. Any behavior that is insulting, rude, vulgar, desecrating, or showing disrespect. Any behavior that appears to violate End user license agreements, including providing product keys or links to pirated software. Unsolicited bulk mail or bulk advertising. Any link to or advocacy of virus, spyware, malware, or phishing sites. Any other inappropriate content or behavior as defined by the Terms of Use or Code of Conduct. Any image, link, or discussion related to child pornography, child nudity, or other child abuse or exploitation.
    Details (required):
    characters remaining

    Was this reply helpful?

    Sorry this didn't help.

    Great! Thanks for your feedback.

    How satisfied are you with this reply?

    Thanks for your feedback, it helps us improve the site.

    How satisfied are you with this reply?

    Thanks for your feedback.

    BIOS Application Error ()

    Hello ALL

    &#;

    I am not sure of the issue I am having with my computer

    &#;

    It is a HP ELITEBOOK P laptop

    &#;

    When I am finished using my computer I do not always turn it completely off sometimes I put it into hibernate/sleep mode particularly if I am working on something and have not finished and wish to get right back to it once I turn my computer on again.

    &#;

    &#;

    When I "WOKE" my computer up, I beegan watching a news video on YOUTUBE when all of a sudden the progress wheel appeared, believing I had loss my WiFi signal I checked the connection only to find it fine.

    &#;

    I restarted the video and the YOUTUBE screen appeared with the video partially playing then stopping and the progress wheel appearign again.

    &#;

    Not knowing what was going on, I restarted my computer only to get a message that says

    &#;

    &#;

    "THE HP BIOS APPLICTION SELECTED IS CORRUPTED OR MISSING. PLEASE INSTALL THE APPLICATION AND TRY AGAIN"

    &#;

    BIOS APPLICATION ERROR ()

    &#;

    ENTER = CONTINUE

    &#;

    &#;

    &#;

    Well there are multiple problems with this

    &#;

    For one the keys on the laptop now do onot work. No matter what I press there is no response, so pressing ENTER to go to the next page is impossible

    &#;

    I now can not turn the power off on the laptop. I can nold the button down until my finger breaks and it WILL NOT GO OFF. I have to unplug it and remove the battery to make that happen and I do not want things to go from bad to worst.

    &#;

    &#;

    I am currently uusing an old Desktop (nearly 20 years old with XP professional on it can you believe it still works fine).

    &#;

    Appreciate any help offered

    &#;

    &#;

    &#;

    &#;


    Bios application error 501 vista - good idea

    Internal Hard Drive Troubleshooter

    Troubleshoot a wide variety of issues, most notably non-detection problems, with your Serial ATA, SATA or SSD drive.

     

    Main Menu
     

    The boot drive is no longer detected
    Drive is not spinning up
    SMART error
    Error Messages
    Check the BIOS
    The Storage drive is no longer detected
    New bootable drive is not detected correctly
    Motherboard Compatibility
    Installing a NEW Storage Drive
    My drive's capacity is lower than I expected
    Noisy Drive



    The Boot Drive is No Longer Detected

    Generally, if a SATA drive is configured as the bootable drive, then the computer relies on that drive to boot the computer and to launch Windows. It is the source of most of the computer's operations. So, if the computer suddenly stops detecting the bootable drive, this will almost certainly mean that the computer will fail to boot at all. Instead, some error message will occur, and it will become obvious that a serious problem has occurred.

    This set of troubleshooting steps will attempt to get the drive detected again, or to conclude whether the drive has failed and should be replaced.

    One error in particular, however, is more important than others to watch out for. If a "SMART error" has recently appeared on your computer, this generally means drive failure is imminent or has already occurred. If you have received a SMART error, we strongly recommend that you stop everything and make an immediate backup of any and all important data contained on this drive that is not already backed up.



    Drive is not spinning up

    Note: These steps are NOT applicable for SSD drives

    If the drive is not receiving power or receiving an incorrect level of power, it will not spin up. To check to see if this is the cause of the BIOS not detecting the hard drive, follow these steps:
     

    1. Power off the computer
    2. Open the computer case and remove the data cable from the hard drive. This will stop any power saving commands from being sent. 
    3. Turn on the system. Check to see if the hard drive is spinning. If you touch the side of the drive you should feel a slight vibration. If you do not hear or feel the hard drive spinning, the drive did not start. 

    If you cannot determine whether the drive is spinning:

    1. Boot the computer and listen carefully.
    2. Shut the computer down.
    3. Disconnect the power cord from the computer itself. 
    4. Disconnect the power cable from the hard drive in question.
    5. Reconnect the power cord to the computer itself. 
    6. Boot the computer up to see if the drive sound was audible before. And, 
    7. Then repeat, only reconnect the hard drive and listen for it to spin up. 
    8. Switch power cables with a device like a CDROM or DVDROM drive so that you are using a known-good power cable.
    9. Check the power supply on your computer to determine whether it is providing sufficient electrical power to operate the drives and devices  you have in your computer. 
    10. If the drive is still not spinning, connect it in another computer if possible.
    11.  Connect the drive in a SATA-USB enclosure or something similar is possible. 
    12. If the drive does not spin up after all of those steps, please visit the Warranty page to begin a warranty replacement order. 



    Back to the top



    SMART error:

    Under what circumstances did the SMART error occur?
     

    After running a SeaTools test:

    SeaTools' PASS or FAIL is the standard that Seagate uses to determine whether a hard drive is still in good working order or is failing. A drive may be failing but continue to function normally for a short time, so SeaTools is often a better judge of whether the hard drive is failing than the drive's functionality at any given moment.

    Therefore, if SeaTools indicates that the drive is failing, Seagate recommends backing up your data immediately and replacing your drive.

    Please see our Warranty Information page for replacement information.


    It appeared suddenly, without warning:

    Each Seagate hard drive engages in regular self-tests, and most computers automatically run regular SMART tests on the hard drive(s) installed on them. SMART tests indicate whether a drive is approaching imminent failure. Thus, if a SMART error appears suddenly, it virtually always means, unfortunately, that the drive is about to fail and should be replaced.


    AnchorA third-party SMART software issued an alert:

    With the backing of personal computer manufacturers, the disk drive industry adopted an analysis system in the 's called Self Monitoring Analysis and Reporting Technology or SMART. The idea then and today is to predict a failure before it happens. Various attributes are being monitored and measured against certain threshold limits. If any one attribute exceeds a threshold then a general SMART Status test will change from Pass to Fail.

    Seagate uses the SeaTools diagnostic software to test the SMART status of the drive. SeaTools does not analyze attributes or thresholds.  As a practical matter, the technology supporting SMART is constantly being improved.  Each new design incorporates improvements that increase the accuracy of the SMART prediction.  As a matter of policy, Seagate does not publish attributes and thresholds.

    Please remember that these third-party programs do not have proprietary access to Seagate hard disk information, and therefore often provide inconsistent and inaccurate results.  SeaTools is more consistent and more accurate and is the standard Seagate uses to determine hard drive failure.



    Back to the top

     


    Error Messages: 

    AnchorBlack screen when Windows is booting

    See Microsoft Knowledge Base Article

     

    Anchor"Delayed write failure" error message

    If you encounter a delayed write failure, please check the following things:

    1. Confirm the cable is firmly connected to the drive.
    2. If the drive cables come loose repeatedly, use locking SATA cables or reposition the drive in the case so that pressure/tautness on the cable is reduced.
    3. If the problem continues, consider replacing your SATA cable.
    4. Confirm you are using the current SATA driver from the manufacturer of your SATA motherboard/controller.
    5. Test the drive using SeaTools Bootable.

     

    Errors from SeaTools

    A FAIL result means two things:

    1. You should make sure your data is completely backed up. If further assistance is needed, please contact Seagate Support for assistance in recovering your data.
    2. You should replace the drive.



    Back to the top
     



    AnchorCheck the BIOS

    The BIOS is a basic status monitor for the state of your computer and its devices.

    Access the BIOS by rebooting the computer and, while it is in the process of booting, before the Windows screen appears, press the key that will open the BIOS. This key will vary by computer make and model, but it is often Escape, Delete, F1, or F2. Consult your computer manufacturer if you are unable to enter the BIOS.

    • Sometimes the reboot will proceed too quickly for you to be able to press the BIOS key in time. In this case, shut down the computer and wait for it to cool a little (probably at least 5 minutes). Then boot the computer again and retry.
    • Most new computers will automatically detect devices through the system setup program (CMOS or BIOS). As the system starts, the auto-detect feature may display the drive model number on screen. Seagate drive model numbers begin with the letters "ST". Some Serial ATA BIOS have a system setup that is not contained within the normal motherboard BIOS. If this is the case, the Serial ATA drive will only be displayed in this Serial ATA BIOS message. Please consult the motherboard or Serial ATA controller documentation for assistance with entering into the Serial ATA BIOS setup.
    • Ensure that the SATA port to which your drive is connected is enabled. If in doubt, enable all SATA ports unless instructed otherwise by the BIOS.

     

    My drive is not detected in the BIOS
    My drive is detected in the BIOS
     

    Most new computers will automatically detect devices through the system setup program (CMOS or BIOS). As the system starts, the auto-detect feature may display the drive model number on screen. Seagate drive model numbers begin with the letters "ST". Some Serial ATA BIOS have a system setup that is not contained within the normal motherboard BIOS. If this is the case, the Serial ATA drive will only be displayed in this Serial ATA BIOS message. Please consult the motherboard or Serial ATA controller documentation for assistance with entering into the Serial ATA BIOS setup.

     

    AnchorIf the drive is not detected in the BIOS

    • Verify Cabling: The cause of non-detection may be faulty cabling. Replace the power cable and the data cable for the drive in question with cables that are known to be in good working order.
    • Connect in a Second Computer (if available)
    • Connect to an External Enclosure (Please verify if the enclosure is compatible with the hard drive).



    Back to the top

     


    AnchorIf the drive is detected in the BIOS

    • Since the drive is detected in the BIOS but has stopped booting correctly, the culprit may be faulty sprers.eue the power cable and the data cable for the drive in question with cables that are known to be in good working order.

    • If the problem persists, the most likely culprit may be a corrupted operating system. In this case, a repair Windows may be necessary.

     Important: If your data is backup up elsewhere and you don't need data recovery, please proceed with the instructions to repair Windows.

     

      Warning: This will very probably erase all data on the drive.

     

    AnchorInsert and boot from your Windows install disc to perform a Windows Repair/Restore.

    1. Disconnect all external storage devices such as external USB, Firewire, and eSATA drives, jump/thumb/flash drives, cameras, and printers before proceeding with a Windows repair or recovery. Failure to disconnect such devices could result in serious data corruption.
    2. Boot up the computer.
    3. Insert your Windows installation CD/DVD into the CD/DVD drive.
    4. Reboot the computer, and it should boot up into the Windows disc.
    5. Select to perform a repair or restore action, and follow the steps provided there.
    6. If the repair or restore fails, the following articles may be of assistance:
    1. If the drive successfully passes the diagnostics (but the Windows repair/recovery failed), then the drive itself is most probably safe to continue using. You should therefore, attempt to erase the drive and reinstall the operating system.

    The simplest way to reinstall the operating system (and probably erase the data, though that does not happen every time) is to insert the Windows CD/DVD in the CD/DVD drive and then reboot the computer. The option to repair Windows should appear as well as an option to reinstall Windows. Since the repair has failed, simply choose to reinstall Windows.
     

    If that fails to reinstall Windows, a stronger erase is probably required. Seagate's utility SeaTools Bootable can perform a quick, a timed, or a Overwrite full erasure (known as a "zero-fill") of the drive. In this case, a full zero-fill is probably the best option. This can take many hours depending on many factors including the drive capacity, so leave adequate time for this. If you are short on time, attempt a timed zero-fill of at least a few minutes.

    Then insert the Windows CD/DVD in the CD/DVD drive and then reboot the computer. You should be able to install Windows as if from scratch.

     

    Back to the top


    When the storage drive is no longer detected

    If a Serial ATA drive, installed as additional storage in your computer, was previously detected but is no longer detected, this set of troubleshooting steps will attempt to get the drive detected again, or to conclude whether the drive has failed and should be replaced.

    If a SMART error has recently appeared on your computer, this generally means drive failure is imminent or has already occurred. If you have received a SMART error, we strongly recommend that you stop everything and make an immediate backup of any and all important data contained on this drive that is not already backed up.

     

    Check the Partition Status
    Lost Partition
    Diagnostics and Reformat
    Reset the Drive Letter

     

    AnchorTo check the partition status, please follow the steps:

    1. Windows 8// Press the Windows key (a) + X and select Computer Management.
    2. Windows 7/Vista/XP: Right-click on (My) Computer and choose Manage.
    3. Select Disk Management.
    4. Locate the storage drive in the lower window. Disk 0 is usually the boot drive. Disk 1 or Disk 2 may be the additional storage drive.

     

    If the drive is detected there and the colored bar to the right is still dark blue (see figure), follow the steps to Reset the Drive Letter.

     

    If the drive is not detected in the lower window of Disk Management at all, please check the BIOS. 

    If your drive is detected there but the colored bar is black (see figure) or some other color means that the partition has become lost.

     

     

    AnchorLost Partition

    A black bar in Disk Management means that the partition has become lost. At this point, we must ensure the safety of your data.

    Is the data on this drive backed up elsewhere, or do you need to try to recover it?

    If you were unable to access the data, please contact Seagate Support for assistance in recovering your data.

     

    If you have data saved elsewhere, proceed with the diagnostics and reformat instructions.

     

    AnchorDiagnostics and Reformat

    Since the data is backed up or you do not need it, we can proceed to diagnostics and reformatting the drive.
     

    Warning:  Formatting the drive will erase all the data on the drive.  
     

    1. Perform a diagnostic on the drive with SeaTools Bootable. See Document ID:  for instructions.

     

    If the drive fails, please begin a warranty replacement order online.

    If the drive passes, reformat the drive using Windows Disk Management.

     
     

    AnchorReset the Drive Letter

    If the drive is no longer detected in (My) Computer / This PC or Windows File Explorer but it is displaying a blue bar in Disk Management, Windows has probably lost track of the drive letter. Please follow these steps:

    • Attempt to perform a checkdisk action on the drive. See Document ID: for instructions.
    • Remove any potential conflicts:
      • Power down the computer.
      • Disconnect all other storage devices, external hard drives, thumb drives, printers, and cameras.
      • Power the computer up again and retry detection.
      • If the drive is detected properly, add the disconnected devices one by one until you find the one that is causing the problem.
      • Re assign devices to unused drive letters to avoid conflicts in the future. See this Microsoft article for instructions.

     


    Back to the top

     

    I am attempting a new installation of a bootable Serial ATA drive in my PC and it is not detected correctly

    Once you connect a new Serial ATA drive in your computer, there remains more to do to get your drive working.

    First of all, often, users want to install a new drive in order to upgrade to a larger hard drive in their computer. This usually means that the user wants to copy all the data from the older hard drive to the newer drive, then install the newer drive as the bootable drive. To upgrade to a new drive, copying your data from the old drive to a new one, see Document ID:

    See also Document ID: for more information on installing drives and Document ID: about the proper drivers in Windows.
     

    Install Windows
    Motherboard Compatibility
    Format the Drive

    Install Windows

    If you are simply going to install a new copy of Windows (the operating system), you first need to format and partition the drive, and then install Windows:

    1. Disconnect all external storage devices such as USB, Firewire, and eSATA drives, jump/thumb/flash drives, cameras, and printers before proceeding with a Windows repair or recovery. Failure to disconnect such devices could result in serious data corruption.
    2. Insert your Windows installation CD/DVD into the CD/DVD drive of your computer.
    3. Power down the computer.
    4. Install the drive physically into the computer.
    5. Boot up the computer.
    6. The Windows installation process should begin, as the computer boots from the installation CD/DVD.
    7. Follow the guidance of the install program.
    8. It will take you through a process of several steps, including partitioning and formatting the drive. You can choose the default setting - one big partition - or choose to partition the drive into multiple different partitions, as you prefer. It will then install Windows.
    9. Once it is complete, it will most probably ask you to remove the CD/DVD and reboot the computer. Once this is done, you should be able to boot into Windows, and the install is complete.
       

    If you correctly installed the drive and it is not detected in the BIOS, please  check motherboard age .



    Back to the top



    Motherboard Compatibility

    Some older computer motherboards are unable to support modern Serial ATA drives.

    If your motherboard only supports SATA1 ( Gbits/sec transfer rate) and you are installing a SATA2 ( Gbits/sec) or SATA3 ( Gbits/sec) drive, the motherboard may not detect the drive. There are four options in that case:

    • Obtain an add-on controller card that can support more modern drives and connect the drive to that card.
    • (For Barracuda drives and older, as well as certain Barracuda models) You can place a jumper on the drive to slow it down to Gbits/sec, so older motherboards can support it.
    • Use an older drive.
    • Update your computer equipment or obtain a newer computer.

    Please make sure if your computer does support SATA2 ( Gbits/sec) drives at least.

    For additional information, please contact the motherboard manufacturer.




    Back to the top



    Installing a NEW Storage Drive

    Once you connect a new Serial ATA drive in your computer as additional storage, there remains more to do to get your drive working.

    First, please see Document ID: for more information on installing drives and Document ID: about the proper drivers in Windows (though if your computer's boot drive is SATA, there should be no need for additional drivers).

    Please proceed formatting the drive.

     

    Format the Drive

    Before the drive can display in (My) Computer/This (PC) or Windows/File Explorer, it must be formatted in Windows. Please see the following articles for instructions:
     

    Instructions in Window 7, 8/ and
     

    Please check the motherboard compatibility if the drive is not detected in the Disk Management application.


    Back to the top



    My drive's capacity is lower than I expected

    If your drive is larger than 2 Terabytes, please see Document ID:

    If your drive is otherwise displaying a lower capacity than you believe was advertised, please see Document ID:  for all relevant information.


    Back to the top



    Noisy Drive

    Abnormal noises include:

    1. High-pitched whining sound can be an indication of abnormal function.
    2. Noises can be caused by mounting issues. This is due to either a high-frequency vibration in the mounting hardware or a potential drive failure.
    3. Repeated, regular tapping, grinding or beeping.
    4. Seagate hard drives do not contain audio speakers. Some failure mechanisms may make a regular repeating beep from the computer's internal speaker. This may or not be hard drive related. Check your system documentation for an explanation of system beep codes. If a drive failure is possible, it is always important to make an immediate backup.
    5. Two hard clicks at start up and then a boot error message or system shutdown is a symptom of a failed drive.  Check your cables and connections in case they might have gotten loose. You can use SeaTools Bootable to diagnose the drive. If SeaTools fails to function properly or is unresponsive, replace the drive.


     


    Back to the top

    Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error ().

  • Unable to save the family settings, error: the system cannot find the specified file error code.

    Original title: Family Safety filter configuration problem.

    Hello.

    I got family safety works very well before a reinstall of Windows 7 Professional.  After I install windows essentials, I connect to my microsoft account, now I'm trying to set up the filter, monitored accounts are already checked, the only option is to save.

    When I click Save I get this

    The system cannot find the specified file error code.

    I've tried everything.  Uninstall, reinstall Windows Essentials   First of all, I did a partial install with just the film and the family.  Uninstalled.  Re-installed full.  Always the same question.  I even tried to install Windows Essentials   No change.

    Help, please.  I appreciate it.

    Thank you

    GISIGER

    Hi Greg,.

    Thanks for the reply.

    Run the System File Checker tool.

    Use the System File Checker tool to repair missing or corrupted system files

    sprers.eu

    Also reset Windows update components and check if this solves the problem.

    Refer to this link:

    sprers.eu

    Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

    Keep us informed on the status of the issue.

  • When I try to download the updates I get error Code B & error Code 66

    Original title: I Keep Getting error B


    When I try to download the Dates, I get error Code B & error Code 66

    Hey, Joe Zerilli,

    1. you remember to make changes to the computer before this problem?

    Step 1:

    You can check the following link and try to run the system update readiness tool and check:

    Windows Update error b

    sprers.eu

    Step 2:

    You can also read the following article and try to reset the Windows Update components and check.

    How to reset the Windows Update components?

    sprers.eu

    Hope this information is useful.

  • How can you save your illustration in Photoshop CC as PNG or JPEG file when it does not give the option?

    How can you save your illustration in Photoshop CC as PNG or JPEG file when it does not give the option?

    Thank you for your time and help in advance.

    Thanks for the reply. I have actually managed to do work. I had my work instead of 16 or bit/channel value. Once I changed it to bit/channel, he gave me the possibility to register under the registered name. Thanks again.

  • I bought dreamwever, but the system gives me the option to download the trial version

    Yesterday I bought dreamwever, but the system gives me the option to download the trial version.

    HOE I do?

    Thank you

    Alfredo

    Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  • When you try to install thecreative cloud without error 1. What is the problem?

    When you try to install thecreative cloud without error 1. What is the problem?

    Error code 1: "unable to install". Creative Cloud Desktop: sprers.eu

  • Firefox crashes when loading websites, freezes when I try to download any file and completely freezes when I try to access the Options menu. Help!

    As he says, I had a difficult time with Firefox lately, and I think that it's corrupted. I tweaked the settings according to the suggestions on this forum and others like him, but they made the problem worse. I've updated to the latest version of the browser that has not helped, and I finally tried the "Reset Firefox" button, which was worse than anything. I lost my custom settings and Add-ons for nothing, the problem persists.

    More frustrating is that it completely crashes whenever I click on tools > Options, so I'm not able to make changes to this new configuration. If I export my favorites safely, I will try to uninstall the browser and re - install an older version of it, but of course it now freezes when I try to export the bookmarks file.

    Thus, apart from trashing it and starting over any suggestions?

    For the record, it's Firefox (do not know what version it was the beginning of the sentence), and the window "On Firefox" said that it is up-to-date. I am running Windows XP.

    Thanks for any help or enlightenment, you might be able to provide.

    Hello

    Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from sprers.eu office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:
        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    More information on the resettlement of Firefox can be found here.

    WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

    Please report back to see if this helped you!

    Thank you.

  • When I try to access the Bluetooth program, receive error message: "Windows has stopped this program due to a Code 43 error.

    Original title: Code43 error (built-in) Bluetooth

    I have a new laptop (vaio) when I try to access the Bluetooth program I received information that Windows has stopped this program error Code 43

    that I understand not as a problem to update. I am running Windows7 Home Premium SP1. All solutions? (outside the deactivation, which I did. I realized the usual remedies IE. checked for driver updates, uninstalled and restarted without result

    Hi DerekWilliams,

    What is the brand and model of your system?

    You can try the following steps and check if it helps:

    Method 1:

    Try to run the corner hardware store and check the issue.

    Convenience hardware store

    For more information, see the article:

    Code Windows has stopped this device because it has reported problems

    Method 2:

    You can refer to the computer or the device manufacturer's Web site and try to install the latest version of the Bluetooth drivers:

    For more information, see the articles:

    Updated a hardware driver that is not working properly

    Update drivers: recommended links

  • Hi, trying to fix my eyedropper in AE CS5. Whenever I click it crashes. Also when I try and perform the updates keep an error saying I need to reinstall but I ain't a disc

    Help, please!

    El Capitan Mac i7 16 gb mhz Intel HD MB

    CS 5 Master

    After Effects: Eyedropper tool causes the program crash.

    All programs do not update error: Adobe After Effects CS5 has been moved or deleted incorrectly. Please start or reinstall the application to update the location and try again. To remove the product from the system, uninstall the product using the alias in "/ Applications/Utilities/Adobe installers.

    Help, please

    using the vacuum after you uninstall and reinstall is often necessary

    -sprers.eu

    Download & install instructions sprers.eu can help

    -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

    -you will need to enter your original serial number during the installation for non-Cloud programs

    - or kglad links in response to #1 here can help sprers.eu

    Also go to sprers.eu

    - and also read sprers.eu

    CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

    -which means you are trying to use CS6 and earlier at YOUR risk of having problems

    This information is a MUST to install old programs on Mac El Capitan

    -You can't get the same error message, but here are some links that CAN help with old programs

    Install CS5 on Mac sprers.eu can help (also for others than CS5)

    -also a TEMPORARY security change sprers.eu

    -sprers.eu s-mac-os-x /

    -the guardian sprers.eu

  • I have a problem when trying to choose from the option menu bar

    I have problem with mozilla since the last update. When try to use one of the options from the menu bar, this appears:

    sprers.eu

    Also, I downloaded the video to show how my problem appears.

    sprers.eu?v=shZGaZ0-_po

    Hello srga90, you can go to firefox > help > troubleshooting information and copy the contents of the graphic section and paste it here? thnx

    Does make a difference if you try to update your video driver or disable hardware acceleration in firefox > options > advanced > General?

  • How to encrypt files in Windows Vista when it only gives me the option to encrypt it?

    Nice day.

    I use an edition of Windows Vista Edition Home Premium and my problem is, it wont let me encrypt my files. The option encrypt my files is "gray" it won't let me select the check box.

    Here's what I did:

    1. place all the files I want encrypted in a folder.

    2. I right click the folder, and then click "Properties".

    3. I click on "Advanced".

    4. in the menu 'Attributes' advanced, it doesn't let me check the "Encrypt contents to secure data".

    If there is someone who could help me in this problem, I am grateful gladly.

    Thank you in advance.

    Encryption of files is not included in Vista Home Premium. It is only in Vista business, full and firm.

    You can use a third-party product like TrueCrypt sprers.eu

  • When I try to open the window Defender, an error message appears

    The error message that stays up for about 3 seconds and said something as "defender of the window may not protect your computer from viruses". "but I can't read more because it goes too fast. I tried to scan my computer several times with Symantic Endpoint Protection & he finds no viruses, but I'm sure that there is something on my computer because whenever I open something on Google, without having to open a new tab, need me the site of evil/a completely random. Defender of the window is the only commodity virus on my computer that recognizes there is a virus, but it does not, is there a way to open it?

    If there is a virus on your system, you will need to clean it up before starting the Defender, the virus has probably disabled it. Go to sprers.eu and download the installation of the free version and update the program and then run a full scan of the system. This should get your system clean unless the virus also disables Malware bytes. I would like to know if you can install and run Malware bytes.

    I hope this helps.

    JB

  • When you try to add the option "number of words" for the column headings in the window my documents, the number of words doesn't quite show

    For school, I need to take a screenshot of the header of column of count of Word showing under my documents.
    When I added the option to account for Word for column headers and clicked it twice so that the word count
    show for files listed, nothing shows up.

    Any help with this would be greatly appreciated!

    Hello

    Welcome to the Microsoft Community and thanks for posting the question.

    According to the description, you are having problems with the number of words not displaying do not.

    What is the format of the Document?

    Number of words is a feature that is available only for Documents Word from Microsoft.

    sprers.eu

    Meet us if you encounter problems with the number of words or any other issue of Windows, and we would be happy to help you.

    Good day!

    Hope this information helps.

  • How you include the doctype in Application.cfc?

    I am trying to convert an sprers.eu file and in the cfm file, I got the following:

    <! - set the content type to ISO, otherwise the default is UTF - 8->
    < cfcontent type = text/html"; charset = ISO ">"

    <! - set the doctype for all documents - >
    < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML Strict / / IN" "sprers.eu" > ""
    " < html xmlns ="sprers.eu">

    I think I put the cfcontent in the SystemFramework function as well as other application variables.  No matter what I do, nothing happens the doctype to appear on the pages. Where do you put that in the SWC file?

    Thank you!

    Holli

    If you want the OUTPUT of the OnRequestStart function, you must use OnRequest() and include the generated output.

    Really, which means you could probably do all what you want just in the OnRequest method, but which belongs to you.

    It is not that OnRequest() breaks webservices, ajax called ect.  OnRequest runs for ALL applications before the Web service request, ajax calls ect.

    Then, if anything method OnRequest adds content, such as the content of your topic, all applications, including Web services and ajax calls.  % of the time, which added content will break the format and avoid thus the functionality of these web service and ajax requests.

    It is not hard to get around.

    (1) have a smarter onRequest method which includes when he meets the demands of ajax or Web service and not to provide content that will break.

    (2) make your resource webservice and ajax inside a different directory with another sprers.eu file with a different (or no) onRequest method.

    (3) as Adam said, don't put content in your sprers.eu but use any number of other methods to apply this type of standard output to all views.

  • When closing firefox 4.0 with several tabs open, I want to save this configuration when I reopen it firefox. the option to save my installation is now not in the command prompt. only that I am closing of several tabs. How can I do this?

    in the old version of firefox, you invited when you were closing multiple tabs. but you were also given the option to save the current configuration so that when you reopen firefox, this configuration would also reopen. How to make it happen with firefox ? Since I updated to firefox , there is no given obtion to save my current setup.

    You are welcome!

    Please mark this issue as resolved for the benefit of other users. Thank you!

  • Answer

    Hi,

    Here are all the methods specifically for Windows 7 (no real difference) :

    References to Vista also apply to Windows 7.

    See if these help - boot with a Windows disk (repair disk ok) and issue these from the Command
    Prompt and hit ENTER after each.

    Setup/Setting (BIOS/CMOS) often F2 as you boot so watch the screen - set to CD/DVD drive first
    in the boot order - remember to set back when done. (Some use F12 or other keys for a one time
    boot order change.)

    C:

    bootrec /fixmbr

    bootrec /fixboot

    bootrec /scanos

    bootrec /rebuildbcd

    How to repair MBR on Windows 7
    sprers.eu

    How To: Repair And Restore Windows Vista Master Boot Record (MBR)
    sprers.eu

    This KB tells how to use /FixMbr and /FixBoot and other options

    How to use the sprers.eu tool in the Windows Recovery Environment to troubleshoot and repair
    startup issues in Windows. This also applied to Windows 7
    sprers.eu

    If those help then run StartUp Repair THREE times - run once and then reboot and run again
    - repeat
    . (Use a Windows 7 disk.)



    Using EasyBCD often works when other methods do not. <-- if Bootrec did not help use this.

    Recovering the Vista or Windows 7 Bootloader from the DVD
    sprers.eu+the+Vista+Bootloader+from+the+DVD

    Recovering the Vista Bootloader with EasyBCD (Windows 7)
    sprers.eu+the+Vista+Bootloader+with+EasyBCD

    Repairing the Windows Vista Bootloader (Windows 7)
    sprers.eu+the+Windows+Vista+Bootloader

    If those help then run StartUp Repair THREE times - run once and then reboot and run again
    - repeat
    . (Use a Winodows 7 disk.)

    How to Run a Startup Repair in Windows 7
    sprers.eu



    If you need to make repair disks - these help repair Windows not re-install.
    Often these disks will help when the OEM Recovery Disk does not.

    Download Windows 7 System Recovery Discs - now charging $ for the ISO
    images to make the disks. (These can be made on any computer running XP,
    Vista, or Window 7 that has a CD/DVD burner.)
    sprers.eu

    How to Create a Windows 7 System Repair Disc - Free (Must be made on a
    Windows 7 computer running the same 32 or 64 bit.)
    sprers.eu

    A Installation Disk can also be made to use for Repair. Of course you would use your own
    COA (Product Key).

    Windows 7 (English) with Service Pack 1

    • Windows 7 Home Premium (x86) - X

    • Windows 7 Home Premium (x64) - X

    • Windows 7 Professional (x86) - X

    • Windows 7 Professional (x64) - X

    • Windows 7 Ultimate (x86)* - X

    • Windows 7 Ultimate (x64)* - X


    See MVP Andre Da Costa's message in this thread.

    sprers.eu

    ======================================

    If needed :

    What to do if Windows won't start correctly
    sprers.eu 

    How to Boot to the System Recovery Options in Windows 7
    sprers.eu

    What are the system recovery options in Windows 7?
    sprers.eu

    A Repair Installation allows you to keep the programs and data though redundant backups
    are always a good idea.

    How to Do a Repair Install to Fix Windows 7
    sprers.eu

    Hope this helps.


    Rob Brown - Microsoft MVP <- profile - Windows Expert - Consumer : Bicycle - Mark Twain said it right.

    Rob Brown - past Microsoft MVP - Windows Insider MVP -
    Microsoft MVP Windows and Devices for IT -

    Report abuse

    Harassment is any behavior intended to disturb or upset a person or group of people. Threats include any threat of suicide, violence, or harm to another. Any content of an adult theme or inappropriate to a community web site. Any image, link, or discussion of nudity. Any behavior that is insulting, rude, vulgar, desecrating, or showing disrespect. Any behavior that appears to violate End user license agreements, including providing product keys or links to pirated software. Unsolicited bulk mail or bulk advertising. Any link to or advocacy of virus, spyware, malware, or phishing sites. Any other inappropriate content or behavior as defined by the Terms of Use or Code of Conduct. Any image, link, or discussion related to child pornography, child nudity, or other child abuse or exploitation.
    Details (required):
    characters remaining

    Was this reply helpful?

    Sorry this didn't help.

    Great! Thanks for your feedback.

    How satisfied are you with this reply?

    Thanks for your feedback, it helps us improve the site.

    How satisfied are you with this reply?

    Thanks for your feedback.

    How to Fix a CMOS Checksum Error

    A CMOS Checksum error is a conflict between the CMOS (Complementary Metal Oxide Semiconductor) and BIOS (Basic Input Output System) that happens when you boot up a computer. It occurs when the computer isn't able to read startup information or the data does not match up.

    In this guide, we explain what causes a CMOS Checksum error and offer instructions for troubleshooting and fixing the problem.

    Causes of CMOS Checksum Errors

    There are several potential reasons for a CMOS checksum error, but almost all come back to the information on the CMOS being corrupt for one reason or another.

    Before an operating system boots, the computer's motherboard handles many lower-level tasks, preparing the system components to run and eventually handing those tasks off to the operating system. The software on the motherboard is called the BIOS. In addition to booting up a computer, the BIOS contains several settings for its hardware, like speeds, voltages, system time, and boot priorities. The BIOS settings aren't saved on the hard drive. They're on a chip called the CMOS.

    Whenever you make changes to the BIOS settings, start your computer up, or shut it down, those events are written to the CMOS. It keeps track of the data to make sure that things run normally the next time you start the computer. The CMOS stays on while the rest of the computer is off because it's powered independently by a watch battery. When the computer starts, it reads the state it was last in from the CMOS. Usually, it can read the information and restore itself without an issue. A CMOS Checksum error occurs when the computer isn't able to read that information.

    One of the more common causes of a checksum error is also the simplest to solve. The battery that powers the CMOS is a watch battery, and it can run out of power. When the battery is dead, the CMOS can't store information anymore.

    Power surges and sudden losses of power are other causes. If a computer doesn't have a chance to write information to the CMOS before it's abruptly powered off, it has a hard time picking up where it left off. Power surges can also cause corruption or hardware damage.

    The final cause is less common, but it can happen. If the BIOS is damaged or corrupted, it will cause a mismatch between the BIOS and CMOS. It's uncommon but possible for a virus to infect and corrupt the BIOS. Still, it's more common that a BIOS update failed or the operating system updated something which caused it to get out of sync with the BIOS.

    How to Fix CMOS Checksum Errors

    While it is not always possible to fix a CMOS checksum error, especially in the case of hardware damage, the fix is usually simple. Follow these steps, in order, to resolve the error.

    1. Restart the computer. A normal restart usually creates a new checksum and eliminates the error. An error lingering after a normal restart requires some more work.

    2. Download and flash a BIOS update. Download the update from the motherboard manufacturer's website. Many motherboards can download an update from within the BIOS while they're plugged into your network using an Ethernet cable.

    3. Reset the BIOS. Some motherboards have a switch either on the board or on the back of the computer to reset the BIOS settings. If there isn't a switch like that, remove the CMOS battery from your system for a minute or two. The loss of power causes everything in the CMOS to reset.

    4. Replace the CMOS battery. If the cause is a dead battery, all you need is a new one. The CMOS battery is located on the computer's motherboard. On desktops, it's easy to get to, and it's only held in place with a metal clip. On laptops, you'll need to open the machine up to get to the motherboard, and that might be better left to a professional.

    5. Consult a technician or computer repair expert. If all of the above fail, the problem may be due to hardware damage. Before you buy a new motherboard or recycle the machine, have a professional check it out to be sure.

    FAQ

    • A checksum is an algorithm used in many programs to confirm the integrity of a file. This is used frequently in downloaded programs to confirm the file hasn't been tampered with or corrupted.

    • Try using WinZip to repair the file. To do this, right-click on the file and select Extract file. Next, go to Miscellaneous and place a checkmark next to Keep Broken Files then choose an extraction location and select OK.

    Thanks for letting us know!

    Get the Latest Tech News Delivered Every Day

    Subscribe

    BIOS Application Error ()

    Hello ALL

    &#;

    I am not sure of the issue I am having with my computer

    &#;

    It is a HP ELITEBOOK P laptop

    &#;

    When I am finished using my computer I do not always turn it completely off sometimes I put it into hibernate/sleep mode particularly if I am working on something and have not finished and wish to get right back to it once I turn my computer on again.

    &#;

    &#;

    When I "WOKE" my computer up, I beegan watching a news video on YOUTUBE when all of a sudden the progress wheel appeared, believing I had loss my WiFi signal I checked the connection only to find it fine.

    &#;

    I restarted the video and the YOUTUBE screen appeared with the video partially playing then stopping and the progress wheel appearign again.

    &#;

    Not knowing what was going on, I restarted my computer only to get a message that says

    &#;

    &#;

    "THE HP BIOS APPLICTION SELECTED IS CORRUPTED OR MISSING. PLEASE INSTALL THE APPLICATION AND TRY AGAIN"

    &#;

    BIOS APPLICATION ERROR ()

    &#;

    ENTER = CONTINUE

    &#;

    &#;

    &#;

    Well there are multiple problems with this

    &#;

    For one the keys on the laptop now do onot work. No matter what I press there is no response, so pressing ENTER to go to the next page is impossible

    &#;

    I now can not turn the power off on the laptop. I can nold the button down until my finger breaks and it WILL NOT GO OFF. I have to unplug it and remove the battery to make that happen and I do not want things to go from bad to worst.

    &#;

    &#;

    I am currently uusing an old Desktop (nearly 20 years old with XP professional on it can you believe it still works fine).

    &#;

    Appreciate any help offered

    &#;

    &#;

    &#;

    &#;


    bios application error 501 vista

    How to Fix a CMOS Checksum Error

    A CMOS Checksum error is a conflict between the CMOS (Complementary Metal Oxide Semiconductor) and BIOS (Basic Input Output System) that happens when you boot up a computer. It occurs when the computer isn't able to read startup information or the data does not match up.

    In this guide, we explain what causes a CMOS Checksum error and offer instructions for troubleshooting and fixing the problem.

    Causes of CMOS Checksum Errors

    There are several potential reasons for a CMOS checksum error, but almost all come back to the information on the CMOS being corrupt for one reason or another.

    Before an operating system boots, the computer's motherboard handles many lower-level tasks, preparing the system components to run and eventually handing those tasks off to the operating system. The software on the motherboard is called the BIOS. In addition to booting up a computer, the BIOS contains several settings for its hardware, like speeds, voltages, system time, bios application error 501 vista, and boot priorities. The BIOS settings aren't saved on the hard drive. They're on a chip called the CMOS.

    Whenever you make changes to the BIOS settings, start your computer up, or shut it down, those events are written to the CMOS. It keeps track of the data to snort error missing incorrect dynamic engine lib sure that things run normally the next time you start the computer. The CMOS stays on while the rest of the computer is off because it's powered independently by a watch battery. When the computer starts, bios application error 501 vista, it reads the state it was last in from the CMOS. Usually, it can read the information and restore itself without an issue. A CMOS Checksum error occurs when the computer isn't able to read that information.

    One of the more common causes of a checksum error is also the simplest to solve. The battery that powers the CMOS is a watch battery, and it can run out of power. When the battery is dead, the CMOS can't store information anymore.

    Power surges and sudden losses of power are other causes. If a computer doesn't have a chance to write information to the CMOS before it's abruptly powered off, it has a hard time picking up where it left off. Power surges can also cause corruption or hardware damage.

    The final cause is less common, but it can happen. If the BIOS is damaged or corrupted, it will cause a mismatch between the BIOS and CMOS. It's uncommon but possible for a virus to infect and bios application error 501 vista the BIOS. Still, it's more common that a BIOS update failed or the operating system updated something which caused it to get out of sync with the BIOS.

    How to Fix CMOS Checksum Errors

    While it is not always possible to fix a CMOS checksum error, especially in the case of hardware damage, the fix is usually simple. Follow these steps, in order, to resolve the error.

    1. Restart the computer. A normal restart usually creates a new checksum and eliminates the error. An error lingering after a normal restart requires some more work, bios application error 501 vista.

    2. Download and flash a BIOS update. Download the update from the motherboard manufacturer's website. Many motherboards can download an update from within the BIOS while they're plugged into your network using an Ethernet cable.

    3. Reset the BIOS. Some motherboards bios application error 501 vista a switch either on the board or on the back of the computer to reset the BIOS settings. If there isn't a switch like that, remove the CMOS battery from your system for a minute or two. The loss of power causes everything in the CMOS to reset.

    4. Replace the CMOS battery. If the cause is a dead battery, all you need is a new one. The CMOS battery is located on the computer's motherboard. On desktops, it's easy to get to, and it's only held in place with a metal clip. On laptops, you'll need to open the machine up to get to the motherboard, and that might be better left to a professional.

    5. Consult a technician or computer repair expert. If all of the above fail, the problem may be due to hardware damage. Before you buy a new motherboard or recycle the machine, have a professional check it out to be sure.

    FAQ

    • A checksum is an algorithm used in many programs to confirm the integrity of a file. This is used frequently in downloaded programs to confirm the file hasn't been tampered with or corrupted.

    • Try using WinZip to repair the file. To do this, right-click on the file and select Extract file. Next, go to Miscellaneous and place a checkmark next to Keep Broken Files then choose an extraction location and select OK.

    Thanks for letting us know!

    Get the Latest Tech News Delivered Every Day

    Subscribe
    Answer

    Hi,

    Here are all the methods specifically for Windows 7 (no real difference) :

    References to Vista also apply to Windows 7.

    See if these help - boot with a Windows disk (repair disk ok) and issue these from the Command
    Prompt and hit ENTER after each.

    Setup/Setting (BIOS/CMOS) often F2 as you boot so watch the screen - set to CD/DVD drive first
    in the boot order - remember to set back when done. (Some use F12 or other keys for a one time
    boot order change.)

    C:

    bootrec /fixmbr

    bootrec /fixboot

    bootrec /scanos

    bootrec /rebuildbcd

    How to repair MBR on Windows 7
    sprers.eu

    How To: Repair And Restore Windows Vista Master Boot Record (MBR)
    sprers.eu

    This KB tells how to use /FixMbr and /FixBoot and other options

    How to use the sprers.eu tool in the Windows Recovery Environment to troubleshoot and repair
    startup issues in Windows. This also applied to Windows 7
    sprers.eu

    If those help then run StartUp Repair THREE times - run once and then reboot and run again
    - repeat
    . (Use a Windows 7 disk.)



    Using EasyBCD often works when other methods do not. <-- if Bootrec did not help use this.

    Recovering the Vista or Bios application error 501 vista 7 Bootloader from the DVD
    sprers.eu+the+Vista+Bootloader+from+the+DVD

    Recovering the Vista Bootloader with EasyBCD (Windows 7)
    sprers.eu+the+Vista+Bootloader+with+EasyBCD

    Repairing the Windows Vista Bootloader (Windows 7)
    sprers.eu+the+Windows+Vista+Bootloader

    If those help then run StartUp Repair THREE times - run once and then reboot and run again
    - repeat
    . (Use a Winodows 7 disk.)

    How to Run a Startup Repair in Windows 7
    sprers.eu



    If you need to make repair disks - these help repair Windows not re-install.
    Often these disks will help when the OEM Recovery Disk does not.

    Download Windows 7 System Recovery Discs - now charging $ for the ISO
    images to make the disks. (These can be made on any computer running XP,
    Vista, or Window 7 that has a CD/DVD burner.)
    sprers.eu

    How to Create a Windows 7 System Repair Disc - Free (Must be made on a
    Windows 7 computer running the same 32 or 64 bit.)
    sprers.eu

    A Installation Disk can also be made to use for Repair. Of course you would use your own
    COA (Product Key).

    Windows 7 (English) with Service Pack 1

    • Windows 7 Home Premium (x86) - X

    • Windows 7 Home Premium (x64) - X

    • Windows 7 Professional (x86) - X

    • Windows 7 Professional (x64) - X

    • Windows 7 Ultimate (x86)* - X

    • Windows 7 Ultimate (x64)* - X


    See MVP Andre Da Costa's message in this thread.

    sprers.eu

    ======================================

    If needed :

    What to do if Windows won't start correctly
    sprers.eu 

    How to Boot to the System Recovery Options in Windows 7
    sprers.eu

    What are the system recovery options in Windows 7?
    sprers.eu

    A Repair Installation allows you to keep the programs and data though redundant backups
    are always a good idea.

    How to Do a Repair Install to Fix Windows 7
    sprers.eu

    Hope this helps.


    Rob Brown - Microsoft MVP <- profile - Windows Expert - Consumer : Bicycle - Mark Twain said it right.

    Rob Brown - past Microsoft MVP - Windows Insider MVP -
    Microsoft MVP Windows and Devices for IT -

    Report abuse

    Harassment is any behavior intended to disturb or upset a person or group of people. Threats include any threat of suicide, violence, or harm to another. Any content of an adult theme or inappropriate to a community web site. Any image, link, or discussion of nudity. Any behavior that is insulting, rude, vulgar, desecrating, or showing disrespect. Any behavior that appears to violate End user license agreements, including providing product keys or links to pirated software. Unsolicited bulk mail or bulk advertising. Any link to or advocacy of virus, spyware, malware, or phishing sites, bios application error 501 vista. Any other inappropriate content or behavior as defined by the Terms of Use or Code of Conduct. Any image, link, or discussion related to child pornography, child nudity, or other child abuse or exploitation.
    Details (required):
    characters remaining

    Was this reply helpful?

    Sorry this didn't help.

    Great! Thanks for your feedback.

    How satisfied are you with this reply?

    Thanks for your feedback, it helps us improve the site.

    How satisfied are you with this reply?

    Thanks for your feedback.

    Internal Hard Drive Troubleshooter

    Troubleshoot a wide variety of issues, most notably non-detection problems, with your Serial ATA, SATA or SSD drive.

     

    Main Menu
     

    The boot drive is no longer detected
    Drive is not spinning up
    SMART error
    Error Messages
    Check the BIOS
    The Storage drive is no longer detected
    New bootable drive is not bios application error 501 vista correctly
    Motherboard Compatibility
    Installing a NEW Storage Drive
    My drive's capacity is roland sp300 error code 0010 0010 than I expected
    Noisy Drive



    The Boot Drive is No Longer Detected

    Generally, if a Acronis runtime error drive is configured as the bootable drive, then the computer relies on that drive to boot the computer and to launch Windows. It is the source of most of the computer's operations. So, if the computer suddenly stops detecting the bootable drive, this will almost certainly mean that the computer will fail to boot at all. Instead, some error message will occur, failed flashing process error getting subscriber it will become obvious that a serious problem has occurred.

    This set of troubleshooting steps will attempt to get the runtime error 713 visual basic detected again, or to conclude whether the drive has failed and should be replaced.

    One error in particular, however, is more important than others to watch out for. If a "SMART error" has recently appeared on your computer, this generally means drive failure is imminent or has already occurred. If you have received a SMART error, we strongly recommend that you stop everything and make an immediate backup of any and all important data contained on this drive that is not already backed up.



    Drive is not spinning up

    Note: These steps are NOT applicable for SSD drives

    If the drive is not receiving power or receiving an incorrect level of power, it will not spin up. To check to see if this is the cause of the BIOS not detecting the hard drive, follow these steps:
     

    1. Power off the computer
    2. Open the computer case and remove the data cable from the hard drive. This will stop any power saving commands from being sent. 
    3. Turn on the system. Check to see if the hard drive is spinning. If you touch the side of the drive you should feel a slight vibration. If you do not hear or feel the hard drive spinning, the drive did not start. 

    Stackwalk failed error 299 you cannot determine whether the drive is spinning:

    1. Boot the computer and listen carefully.
    2. Shut the computer down.
    3. Disconnect the power cord from the computer itself. 
    4. Disconnect the power cable from the hard drive in question.
    5. Reconnect the power cord to the computer itself. 
    6. Boot the computer up to see if the drive sound was audible before. And, 
    7. Then repeat, only reconnect the hard drive and listen for it to spin up. 
    8. Switch power cables with a device like a CDROM or DVDROM drive so that you are using a known-good power cable.
    9. Check the power supply on your computer to bios application error 501 vista whether it is providing sufficient electrical power to operate the drives and devices  you have in your computer. 
    10. If the drive is still not spinning, connect it in another computer if possible.
    11.  Connect the drive in a SATA-USB enclosure or something similar is possible. 
    12. If the drive does not spin up after all of those steps, please visit the Warranty page to begin a warranty replacement order. 



    Back to the top



    SMART error:

    Under what circumstances did the SMART error occur?
     

    After running a SeaTools test:

    SeaTools' PASS or FAIL is the standard that Seagate uses to determine whether a hard drive is still in good working order or is failing. A drive may be failing but continue to function normally for a short time, so SeaTools is often a better judge of whether the hard drive is failing than the drive's functionality at any given moment.

    Therefore, if SeaTools indicates that the drive is failing, Seagate recommends backing up your data immediately and replacing your drive.

    Please see our Warranty Information page for replacement information.


    It appeared suddenly, without warning:

    Each Seagate hard drive engages in regular self-tests, and most computers automatically run regular SMART tests on the hard drive(s) installed on them. SMART tests indicate whether a drive is approaching imminent failure. Thus, if a SMART error appears suddenly, it virtually always means, unfortunately, that the drive is about to fail and should be replaced.


    AnchorA third-party SMART software issued an alert:

    With the backing of personal computer manufacturers, the disk drive industry adopted an analysis system in the 's called Self Monitoring Analysis and Reporting Technology or SMART. The idea then and today is to predict a failure before it happens. Various attributes are being monitored and measured against certain threshold limits. If any one attribute exceeds a threshold then a general SMART Status test will change from Pass to Fail.

    Seagate uses the SeaTools diagnostic software to test the SMART status of the drive. SeaTools does not analyze attributes or thresholds.  As a practical matter, the technology supporting SMART is constantly being improved.  Each new design incorporates improvements that increase the accuracy of the SMART prediction.  As a matter of policy, Seagate does not publish attributes and thresholds.

    Please remember that these third-party programs do not have proprietary access to Seagate hard disk information, and therefore often provide inconsistent and inaccurate results.  SeaTools is more consistent and more accurate and is the standard Seagate uses to determine hard drive failure.



    Back to the top

     


    Error Messages: 

    AnchorBlack screen when Windows is booting

    See Microsoft Knowledge Base Article

     

    Anchor"Delayed write failure" error message

    If you encounter a delayed write failure, please check the following things:

    1. Confirm the cable is firmly connected to the drive.
    2. If the drive cables come loose repeatedly, use locking SATA cables or reposition the drive in the case so that pressure/tautness on the cable is reduced.
    3. If the problem continues, consider replacing your SATA cable.
    4. Confirm you are using the current SATA driver from the manufacturer of your SATA motherboard/controller.
    5. Test the drive using SeaTools Bootable.

     

    Errors from SeaTools

    A FAIL result means two things:

    1. You should make sure your data is completely backed up. If further assistance is needed, please contact Seagate Support for assistance in recovering your data.
    2. You should replace the drive.



    Back to the top
     



    AnchorCheck the BIOS

    The BIOS is a basic status monitor for the state of your computer and its devices.

    Access the BIOS by rebooting the computer and, bios application error 501 vista, while it is in the process of booting, before the Windows screen appears, press the key that will open the BIOS. This key will vary by computer make and model, bios application error 501 vista, but it is often Escape, Delete, F1, or F2. Consult your computer manufacturer if you are unable to enter the BIOS.

    • Sometimes the reboot will proceed too quickly for you to be able to press the BIOS key in time. In this case, shut down the computer and wait for it to cool a little (probably at least 5 minutes). Then boot the computer again and retry.
    • Most new computers will automatically detect devices through the system setup program (CMOS or BIOS). As the system starts, the auto-detect feature may display the drive model number on screen. Seagate drive model numbers begin with the letters "ST". Some Serial ATA BIOS have a system setup that is not contained within the normal motherboard BIOS. If this is the case, the Serial ATA drive will only be displayed in this Serial ATA BIOS message. Please consult the motherboard or Serial ATA controller documentation for assistance with entering into the Serial ATA BIOS setup.
    • Ensure that the SATA port bios application error 501 vista which your drive is connected is enabled. If in doubt, enable all SATA ports unless instructed otherwise by the BIOS.

     

    My drive is not detected in the BIOS
    My drive is detected in the BIOS
     

    Most new computers will automatically detect devices through the system setup program (CMOS or BIOS). As the system starts, the auto-detect feature may display the drive model number on screen. Seagate drive model numbers begin with the letters "ST". Some Serial ATA BIOS have a system setup that is not contained within the normal motherboard BIOS. If this is the case, the Serial ATA drive will only be displayed in this Serial ATA BIOS message. Please consult the motherboard or Serial ATA controller documentation for assistance with entering into the Serial ATA BIOS setup.

     

    AnchorIf mail error php drive is not detected in the BIOS

    • Verify Cabling: The cause of non-detection may be faulty cabling. Replace the power cable and the data cable for bios application error 501 vista drive in question with cables that are known to be in good working order.
    • Connect in a Second Computer (if available)
    • Connect to an External Enclosure (Please verify if the enclosure is compatible with the hard drive).



    Back to the top

     


    AnchorIf the drive is detected in the BIOS

    • Since the drive is detected in the BIOS but has stopped booting correctly, the culprit may be faulty sprers.eue the power cable and the data cable for the drive in question with cables that are known to be in good working order.

    • If the problem persists, the most likely culprit may be a corrupted operating system. In this case, a repair Windows may be necessary.

     Important: If your data is backup up elsewhere and you don't need data recovery, please proceed with the instructions to repair Windows.

     

      Warning: This will very probably erase all data on the drive.

     

    AnchorInsert and boot from your Windows install disc to perform a Windows Repair/Restore.

    1. Disconnect all external storage devices such as external USB, Firewire, and eSATA drives, bios application error 501 vista, jump/thumb/flash drives, cameras, and printers before proceeding with a Windows repair or recovery. Failure to disconnect such devices could result in serious data corruption.
    2. Boot up the computer.
    3. Insert your Windows installation CD/DVD into the CD/DVD drive.
    4. Reboot the computer, bios application error 501 vista, and it should boot up into the Windows disc.
    5. Select to perform a repair or restore action, and follow the steps provided there.
    6. If the repair or restore fails, the following articles may be of assistance:
    1. If the drive successfully passes the diagnostics (but the Windows repair/recovery failed), then the drive itself is most probably safe to continue using. You should therefore, attempt to erase the drive and reinstall the operating system.

    The simplest way to reinstall the operating system (and probably erase the data, though that does not happen every time) is to insert the Windows CD/DVD in the CD/DVD drive and then reboot the computer. The option to repair Windows should appear as well as an option to reinstall Windows. Since the repair has failed, simply choose to reinstall Windows.
     

    If that fails to reinstall Windows, a stronger erase is probably required. Seagate's utility SeaTools Bootable can perform a quick, a timed, or a Overwrite full erasure (known as a "zero-fill") of the drive. In this case, a full zero-fill is probably the best option. This can take many hours depending on many factors including the drive capacity, so leave adequate time for this. If you are short on time, attempt a timed zero-fill of at least a few minutes.

    Then insert the Windows CD/DVD in the CD/DVD drive and then reboot the computer. You should be able to install Windows as if from scratch.

     

    Back to the top


    When the storage drive is no longer detected

    If a Serial ATA drive, installed as additional storage in your computer, was previously detected but is no longer detected, this set of troubleshooting steps will run-time error 1059 to get the drive detected again, or to conclude whether the drive has failed and should be replaced.

    If a SMART error has recently appeared on your computer, this generally means drive failure is imminent or has already occurred. If you have received a SMART error, we strongly recommend that you stop everything and make an immediate backup of any and all important data contained on this drive that is not already backed up.

     

    Check the Partition Status
    Lost Partition
    Diagnostics and Reformat
    Reset the Drive Letter

     

    AnchorTo check the partition status, please follow the steps:

    1. Windows 8// Press error invalid sid Windows key (a) + X and select Computer Management.
    2. Windows 7/Vista/XP: Right-click on (My) Computer and choose Manage.
    3. Select Disk Management.
    4. Locate the bios application error 501 vista drive in the lower window. Disk 0 is usually the boot drive. Disk 1 or Disk 2 may be the additional storage drive.

     

    If the drive is detected there and the colored bar to the right is still dark blue (see figure), follow the steps to Reset the Drive Letter.

     

    If the drive is not detected in the lower window of Disk Management at all, please check the BIOS. 

    If your drive is detected there but the colored bar is black (see figure) or some other color means that the partition has become lost.

     

     

    AnchorLost Partition

    A black bar in Disk Management means that the partition has become lost. At this point, we must ensure the safety of your data.

    Is the data on this drive backed up elsewhere, or do you need to try to recover it?

    If you were unable to access the data, please contact Seagate Support for assistance in recovering your data.

     

    If you have data saved elsewhere, proceed with the diagnostics and reformat instructions.

     

    AnchorDiagnostics and Reformat

    Since the data is backed up or you do not need it, bios application error 501 vista, we can proceed to diagnostics and reformatting the drive.
     

    Warning:  Formatting the drive will erase all the data on the drive.  
     

    1. Perform a diagnostic on the drive with SeaTools Bootable. See Document ID:  for instructions.

     

    If the drive fails, bios application error 501 vista, please begin a warranty replacement order online.

    If the drive passes, reformat the drive using Windows Disk Management.

     
     

    AnchorReset the Drive Letter

    If the drive is no longer detected in (My) Computer / This PC or Windows File Explorer but it is displaying a blue bar in Disk Management, Windows has probably lost track of the drive letter, bios application error 501 vista. Please follow these steps:

    • Attempt to perform a checkdisk action on the network error [10054] cannot set date. See Document ID: for instructions.
    • Remove any potential conflicts:
      • Power down the computer.
      • Disconnect all other storage devices, external hard drives, thumb drives, printers, and cameras.
      • Power the computer up again and retry detection.
      • If the drive is detected properly, add the disconnected devices one by one until you find the one that is causing the problem.
      • Re assign devices to unused drive letters to avoid conflicts in the future. See this Microsoft article for instructions.

     


    Back to the top

     

    I am attempting a new installation of a bootable Serial ATA drive in my PC and it is not detected correctly

    Once you connect a new Serial ATA drive in your computer, there remains more to do to get your drive working.

    First of all, often, users want to install a new drive in order to upgrade to a larger hard drive in their computer. This usually means that the user wants to copy all the data from the older hard drive to the newer drive, then install the newer drive as the bootable drive. To upgrade to a new drive, copying your data from the old drive to a new one, see Document ID:

    See also Document ID: for more information on installing drives and Document ID: about the proper drivers in Windows.
     

    Install Windows
    Motherboard Compatibility
    Format the Drive

    Install Windows

    If you are simply going to install a new copy of Windows (the operating system), you first need to format and partition the drive, bios application error 501 vista, and then install Windows:

    1. Disconnect all external storage devices such as USB, bios application error 501 vista, Firewire, and eSATA drives, jump/thumb/flash drives, cameras, and printers before proceeding with a Windows repair or recovery. Failure to disconnect such devices could result in serious data corruption.
    2. Insert your Windows installation CD/DVD into the CD/DVD drive of your computer.
    3. Power down the computer.
    4. Install the drive physically into the computer.
    5. Boot up the bios application error 501 vista The Windows installation process should begin, as the computer boots from the installation CD/DVD.
    6. Follow the guidance of the install program.
    7. It will take you through a process of several steps, including partitioning and formatting the drive. You can choose the default setting - one big partition - or choose to partition the drive into multiple different partitions, as you prefer. It will bios application error 501 vista install Windows.
    8. Once it is complete, it will most probably ask you to remove the CD/DVD and reboot the computer. Once this is done, you should be able to boot into Windows, and the install is complete.
       

    If you correctly installed the drive and it is not detected in the BIOS, please  check motherboard age .



    Back to the top



    Motherboard Compatibility

    Some older computer motherboards are unable to support modern Serial ATA drives.

    If your motherboard only supports SATA1 ( Gbits/sec transfer rate) and you are installing a SATA2 ( Gbits/sec) or SATA3 ( Gbits/sec) drive, the motherboard may not detect the drive. There are four options in that case:

    • Obtain an add-on controller card that can support more modern drives and connect the drive to that card.
    • (For Barracuda drives and older, as well as certain Barracuda models) You can place a jumper on the drive to slow it down to Gbits/sec, so older motherboards can support it.
    • Use an older drive.
    • Update your computer equipment or obtain a newer computer.

    Please make sure if your computer does support SATA2 ( Gbits/sec) drives at least.

    For additional information, please contact the motherboard manufacturer.




    Back to the top



    Installing a NEW Storage Drive

    Once you connect a new Serial ATA drive in your computer as additional storage, there remains more to do to get your drive working.

    First, please see Document ID: for more information on installing drives and Document ID: about the proper drivers in Windows (though if your computer's boot drive is SATA, there should be no need for additional drivers).

    Please proceed formatting the drive.

     

    Format the Drive

    Before the drive can display in (My) Computer/This (PC) or Windows/File Explorer, it must be formatted in Windows. Please see the following articles for instructions:
     

    Instructions in Window 7, 8/ and
     

    Please check the motherboard compatibility if the drive is not detected in error app die id Disk Management application.


    Back to the top



    My drive's capacity is lower than I expected

    If your drive is larger than 2 Terabytes, bios application error 501 vista, please see Document ID:

    If your drive is otherwise displaying a lower capacity than you believe was advertised, please see Document ID:  for all relevant information.


    Back to the top



    Noisy Drive

    Abnormal noises include:

    1. High-pitched whining sound can be an indication of abnormal function.
    2. Noises can be caused by mounting issues. This is due to either a high-frequency vibration in the mounting hardware or a potential drive failure.
    3. Repeated, regular tapping, grinding or beeping.
    4. Seagate hard drives do not contain audio speakers. Some failure mechanisms may make a regular repeating beep from the computer's internal speaker. This may or not be hard drive related. Check your system documentation for an explanation of system beep codes. If a bios application error 501 vista failure is possible, it is always important to make an immediate backup.
    5. Two hard clicks at start up and then a boot error message or system shutdown is a symptom of a failed drive.  Check your cables and connections in case they might have gotten loose. You can use SeaTools Bootable to diagnose the drive. If SeaTools fails to function properly or is unresponsive, replace the drive.


     


    Back to the top

    BIOS Application Error ()

    Hello ALL

    &#;

    I am not sure of the issue I am having with my computer

    &#;

    It is a HP ELITEBOOK P laptop

    &#;

    When I am finished using my computer I do not always turn it completely off sometimes I put it into hibernate/sleep mode particularly if I am working on something and have not finished and wish to get right back to it once I turn my computer on again.

    &#;

    &#;

    When I "WOKE" my computer up, I beegan watching a news video on YOUTUBE when all of a sudden the progress wheel appeared, believing I had loss my WiFi signal I checked the connection only to find it fine.

    &#;

    I restarted the video and the YOUTUBE screen appeared with the video partially playing then stopping and the progress wheel appearign again.

    &#;

    Not knowing what was going on, I restarted my computer only to get a message that says

    &#;

    &#;

    "THE HP BIOS APPLICTION SELECTED IS CORRUPTED OR MISSING. PLEASE INSTALL THE APPLICATION AND TRY AGAIN"

    &#;

    BIOS APPLICATION ERROR ()

    &#;

    ENTER = CONTINUE

    &#;

    &#;

    &#;

    Well there are multiple problems with this

    &#;

    For one the keys on the laptop now do onot work. No matter what I press there is no response, so pressing ENTER to go to the next page is impossible

    &#;

    I now can not turn the power off on the laptop. I can nold the button down until my finger breaks and it WILL NOT GO OFF. I have to unplug it and remove the battery to make that happen and I do not want things to go from bad to worst.

    &#;

    &#;

    I am currently uusing an old Desktop (nearly 20 years old with XP professional on it can you believe it still works fine).

    &#;

    Appreciate any help offered

    &#;

    &#;

    &#;

    &#;


    Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error ().

  • Unable to save the family settings, error: the system cannot find the specified file error code.

    Original title: Family Safety filter configuration problem.

    Hello.

    I got family safety works very well before a reinstall of Windows 7 Canon ip1900 service error 5100 After I install windows essentials, I connect to my microsoft account, now I'm trying to set up the filter, monitored accounts are already checked, the only option is to save.

    When I click Save I get this

    The system cannot find the specified file error code.

    I've tried everything.  Uninstall, reinstall Windows Essentials   First of all, I did a partial install with just the film and the family.  Uninstalled.  Re-installed full.  Always the same question.  I even tried to install Windows Essentials   No change.

    Help, please.  I appreciate it.

    Thank you

    GISIGER

    Hi Greg.

    Thanks for the reply.

    Run the System File Checker tool.

    Use the System File Checker tool to repair missing or corrupted system files

    sprers.eu

    Also reset Windows update components and check if this solves the problem.

    Refer to this link:

    sprers.eu

    Important: Follow the steps in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

    Keep us informed on the status of the issue.

  • When I try to download the updates I get error Code B & error Code 66

    Original title: I Keep Getting error B


    When I try to download the Dates, I get error Code B & error Code 66

    Hey, Joe Zerilli,

    1. you remember to make changes to the computer before this problem?

    Step 1:

    You can check the following link and try to run the system update readiness tool and check:

    Windows Update error b

    sprers.eu

    Step 2:

    You can also read the following article and try to reset the Windows Update components and check.

    How to reset the Windows Update components?

    sprers.eu

    Hope this information is useful.

  • How can you save your illustration in Photoshop CC as PNG or JPEG file when it does not give the option?

    How can you save your illustration in Photoshop CC as PNG or JPEG file when it does not give the option?

    Thank you for your time and help in advance.

    Thanks for the reply. I have bios application error 501 vista managed to do work. I had my work instead of 16 or bit/channel value. Once I changed it to bit/channel, he gave me the possibility to register under the registered name. Thanks again.

  • I bought dreamwever, but the system gives me the option to download the trial version

    Yesterday I bought dreamwever, but the system gives me the option to download the trial version.

    HOE I do?

    Thank you

    Alfredo

    Troubleshooting FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  • When you try to install thecreative cloud without error 1. What is the problem?

    When you try to install thecreative cloud without error 1. What is the problem?

    Error code 1: "unable to install", bios application error 501 vista. Creative Cloud Desktop: sprers.eu

  • Firefox crashes when loading websites, freezes when I try to download any file and completely freezes when I try to access the Options menu. Help!

    As he says, I had a difficult time with Firefox lately, and I think that it's corrupted. I tweaked the settings according to the suggestions on this forum and others like him, but they made the problem worse. I've updated to the latest version of the browser that has not helped, and I finally tried the "Reset Firefox" button, which was worse than anything. I lost my custom settings and Add-ons for nothing, the problem persists.

    More frustrating is that it completely crashes whenever I click on tools > Options, so I'm not able to make changes to this new configuration. If I export my favorites safely, I will try to uninstall the browser and re - install an older version of it, but of course it now freezes when I try to export the bookmarks file.

    Thus, apart from trashing it and starting over any suggestions?

    For the record, it's Firefox (do ricoh 4015 error e42 know what version it was the beginning of the sentence), and the window "On Firefox" said that it is up-to-date. I am running Windows XP.

    Thanks for any help or enlightenment, you might be able to provide.

    Hello

    Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from sprers.eu office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:
        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    More information on the resettlement of Firefox can be found here.

    WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

    Please report back to see if this helped you!

    Thank you.

  • When I try to access the Bluetooth program, receive error message: "Windows has stopped this program due to a Code 43 error.

    Original title: Code43 error (built-in) Bluetooth

    I have a new laptop (vaio) when I try to access the Bluetooth program I received information that Windows has stopped this program error Code 43

    that I understand not as a problem to update. I am running Windows7 Home Premium SP1. All solutions? (outside the deactivation, which I did. I realized the usual remedies IE. checked for driver updates, uninstalled and restarted without result

    Hi DerekWilliams,

    What is the brand and model of your system?

    You bios application error 501 vista try the following steps and check if it helps:

    Method 1:

    Try to run the corner hardware store and check the issue.

    Convenience hardware store

    For more information, see the article:

    Code Windows has stopped this device because it has reported problems

    Method 2:

    You can refer to the computer or the device manufacturer's Web site and try to install the latest version of the Bluetooth drivers:

    For more information, bios application error 501 vista, see the articles:

    Updated a hardware driver that is not working properly

    Update drivers: recommended links

  • Hi, trying to fix my eyedropper in AE CS5. Whenever Bios application error 501 vista click it crashes. Also when I try and perform the updates keep an error saying I need to reinstall but I ain't a disc

    Help, please!

    El Capitan Mac i7 16 gb mhz Intel HD MB

    CS 5 Master

    After Effects: Eyedropper tool causes the program crash.

    All programs do not update error: Adobe After Effects CS5 has been moved or deleted incorrectly. Please start or reinstall the application to update the location and try again. To remove the product from the system, uninstall the product using the alias in "/ Applications/Utilities/Adobe installers.

    Help, please

    using the vacuum after you uninstall and reinstall is often necessary

    -sprers.eu

    Download & install instructions sprers.eu can help

    -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

    -you will need to enter your original serial number during the installation for non-Cloud programs

    - or kglad links in response to #1 here can help sprers.eu

    Also go to sprers.eu

    - and also read sprers.eu

    CS6 and previous programs have not been tested and will not be updated to run on Mac El Bios application error 501 vista means you are trying to use CS6 and earlier at YOUR risk of having problems

    This information is a MUST to install old programs on Mac El Capitan

    -You can't get the same error message, but here are some links that CAN help with old programs

    Install CS5 on Mac sprers.eu can help (also for others than CS5)

    -also a TEMPORARY security change sprers.eu

    -sprers.eu s-mac-os-x /

    -the guardian sprers.eu

  • I have a problem when trying to choose from the option menu bar

    I have problem with mozilla bios application error 501 vista the last update. When try to use one of the options from the menu bar, this appears:

    sprers.eu

    Also, I downloaded the video to show how my problem appears.

    sprers.eu?v=shZGaZ0-_po

    Hello srga90, you can go to firefox > help > troubleshooting information and copy the contents of the dbus error org.freedesktop section and paste it here? thnx

    Does make a difference if you try to update your video driver or disable hardware acceleration in firefox > options > advanced > General?

  • How to encrypt files in Windows Vista when it only gives me the option to encrypt it?

    Nice day.

    I use an edition of Windows Vista Edition Home Premium and my problem is, it wont let me encrypt my files. The option encrypt my files is "gray" it won't let me select the check box.

    Here's what I did:

    1. place all the files I want encrypted in a folder.

    2. I right click the folder, and then click "Properties".

    3. I click on "Advanced".

    4, bios application error 501 vista. in the menu 'Attributes' advanced, it doesn't let me check the "Encrypt contents to secure data".

    If there is someone who could help me in this problem, I am grateful gladly.

    Thank you in advance.

    Encryption of files is not included in Vista Home Premium. It is only in Vista business, bios application error 501 vista, full and firm.

    You can use a third-party product like TrueCrypt sprers.eu

  • When I try to open the window Defender, an error message appears

    The error message that stays up for about 3 seconds and said something as "defender of the window may not protect your computer from viruses". "but I can't read more because it goes too fast. I tried to scan my computer several times with Symantic Endpoint Protection & he finds no viruses, but I'm sure that there is something on my computer because whenever I open something on Google, without having to open a new tab, need me the site of evil/a completely random. Defender of error afudos.exe /i window is the only commodity virus on my computer that recognizes there is a virus, but it does not, is there a way to open it?

    If there is a virus on your system, you will need to clean it up before starting the Defender, the virus has probably disabled it. Go to sprers.eu and download the installation of the free version and update the program and then run a full scan of the system. This should get your system clean unless the virus also disables Malware bytes. I would like to know if you can install and run Malware bytes.

    I hope this helps.

    JB

  • When you try to add the option "number of words" for the column headings in the window my documents, the number of words doesn't quite show

    For school, bios application error 501 vista, I need to take a screenshot of the header of column of count of Word showing under my documents.
    When I added the option to account for Word for column headers and clicked it twice so that the word count
    show for files listed, nothing shows up.

    Any help with this would be greatly appreciated!

    Hello

    Welcome to the Microsoft Community and thanks for posting the question.

    According to the description, you are having problems with the number of words not displaying do not.

    What is the format of the Document?

    Number of words is a feature that is available only for Documents Word from Microsoft.

    sprers.eu

    Meet bios application error 501 vista if you encounter problems with the number of words or any other issue of Windows, and we would be happy to help you.

    Good day!

    Hope this information helps.

  • How you windows dir errorlevel the doctype in Application.cfc?

    I am trying to convert an sprers.eu file and in the cfm file, I got the following:

    <! - set the content type to ISO, otherwise the default is UTF - 8->
    < cfcontent type = text/html"; charset = ISO ">"

    <! - set the doctype for all documents - >
    < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML Strict / / IN" "sprers.eu" > ""
    " < html xmlns ="sprers.eu">

    I think I put the cfcontent in the SystemFramework function as well as other application variables.  No matter what I do, nothing happens the doctype to appear on the pages. Where do you put that in the SWC file?

    Thank you!

    Holli

    If you want the OUTPUT of the OnRequestStart function, you must use OnRequest() and include the generated output.

    Really, which means you could probably do all what you want just in the OnRequest method, but which belongs to you.

    It is not that OnRequest() breaks webservices, ajax called ect.  OnRequest non sistem error for ALL applications before the Web service request, ajax calls ect.

    Then, if anything method OnRequest adds content, such as the content of your topic, all applications, including Web services and ajax calls.  % of the time, which added content will break the format and avoid thus the functionality of these web service and ajax requests.

    It is not hard to get around.

    (1) have a smarter onRequest method which includes when he meets the demands of ajax or Web service and not to bios application error 501 vista content that will break.

    (2) make your resource webservice and ajax inside a different directory with another sprers.eu file with a different (or no) onRequest method.

    (3) as Adam said, don't put content in your sprers.eu but use any number of other methods to apply this type of standard output to all bios application error 501 vista closing firefox 4.0 with several tabs open, I want to save this configuration when I reopen it firefox. the option to save my installation is now not in the command prompt. only that I am closing of several tabs. How can I do this?

    in the old version of firefox, you invited when you were closing multiple tabs. but you were also given the option to save the current configuration so that when you reopen firefox, this configuration would also reopen. How to make it happen with firefox ? Since I updated to firefoxthere is no given obtion to save my current setup.

    You are welcome!

    Please mark this issue as resolved for the benefit of other users. Thank you!

  • Similar video

    How to fix BIOS Application Error (501) problem in HP Laptops

    0 Comments

    Leave a Comment