A disk read error occured

a disk read error occured

What does "A disk read error occurred" error mean? Windows installation on this virtual machine is corrupted. This could be caused by improperly shutting down the VM. Resolution. Open Time Machine and restore. The most common cause for this error is an incorrect MBR configuration. This is usually caused by disk write errors, virus attacks or power outages. Cause 2.

Similar video

A disk read error occurred 100% Solved This Error 8 Solutions

Chances are that while working on your Windows system, you might get a a disk read error occured stating – A disk read error occurred. Press Ctrl + Del + Alt to restart. The error a disk read error occured mostly associated with a corrupt or malfunctioning hard disk and might lead to the unavailability of data. The good news is that there are numerous solutions to fix the disk read error on Windows. In this guide, we will first explain what causes a disk read error and further discuss 8 working solutions for it.


Overview of Computer's Disk Read Error

"How do I fix disk read error occurred in Windows 10? Every time I try to access my hard disk, I get this error on my system."

As a friend of mine asked me this, I realized that a lot of other Windows users also encounter this issue. In a nutshell, the error occurs when Windows detects a problem with its hard disk. Alternatively, there could be error syncing stream problem with reading the disk as well. When a disk read error occurs, we get a prompt like this – asking us to restart the system. Sadly, even after restarting it, users encounter the same "disk read error occurred" prompt.


Although a disk read error occurred is more common in Windows 7 and 10, it can happen in other Windows asus rog cmos checksum error too. You can look for the following symptoms to detect them beforehand.

  • The hard disk takes longer than the usual time to load.
  • There is a peculiar clicking sound when the system starts.
  • A few unwanted read/write disk errors or warnings occur.
  • Some of your files go missing or are deleted automatically.
  • The system takes a lot of time to restart or power off.
  • A missing partition or drive icon while browsing.
  • A sector becomes unavailable out of the blue.

What Causes a Disk Read Error?

Before we teach you how to fix a disk read error, it is important to diagnose the problem first. Mostly, one or more of these conditions can be the leading cause for the "a error 1330 corel draw read error occurred" issue.

This is one of the major reasons for getting a disk read error on Windows, a disk read error occured. Chances are that the system's hard drive might be damaged, corrupted, or have a bad sector. Therefore, Windows is not able to read the stored content from the drive.

  • Cable or read/write head damage

The cable connecting your hard drive with other system components can also be damaged. Also, the read/write head of the hard disk might be malfunctioning or damaged as well.

  • Missing booting components

There are certain booting components that the system extracts from your hard drive. If they are missing, then you might encounter the disk error that occurred promptly.

If your system has been turned off unexpectedly due to a power outage or a disk read error occured accident, then it can lead to some missing components.

The Master Boot Record is needed for a system to initiate. If it has been corrupted or is missing, then the system can display "a disk read error occurred" screen.

Apart from that, any other BIOS or firmware-related issue can also be one of the reasons for this. A virus attack, physically damaged drive, bad sector, a disk read error occured, corrupt file system, etc. are some other causes.

8 Solutions to a Disk Read Error Occurred in Windows 10/7

Now when you know what causes a disk read error, let's dive in and learn how do I bypass or fix repair disk errors as well.

1 Remove external devices

We have started with basic solutions and have gradually moved to more complex ones. A lot of times, an external or peripheral device can block a component in Windows and cause a disk read error. Therefore, you can simply remove all kinds of external a disk read error occured peripheral devices from the system. A disk read error occured would include USD drives, SD cards, CD/DVDs, headphones, and so counter-terrorist - 2806. If you have connected a Bluetooth device (like a wireless mouse or headphones), then disconnect it as well.


2 Restart the computer after a while

Overheating of the system is one of the major reasons for getting a disk read error occurred. If this is the case, then simply turn off your system and let it rest. To forcefully turn off the computer, you can long-press the Power key. Now, wait for at least a few hours so that all the internal components and chips would be cooled down. Turn it on and check if you still get a disk read error occurred promptly on your Windows 7/10 system.


3 Check the disk cable

Sometimes, the problem is not with the hard disk, but with its connecting cable instead. To check this, you might have to disassemble your system. Now, carefully examine the connected SATA or IDE cable or simply replace it with a new one. Furthermore, you should check that the cable is connected to the correct port or not. Also, the disk jumper should be connected to the master slot, a disk read error occured. You can even remove all the other disks and try turning on the system with just the boot disk connected.


4 Mimaki jv3-160sp, error 46 and repair the hard disk

As stated above, a corrupt hard disk or a bad sector is one of the major reasons for getting a disk read error. Thankfully, there are multiple ways to fix a corrupt hard disk. You can use the startup manager or take the assistance of commands like CHKDSK (Check Disk) and SFC (System File Checker). The System File Checker will perform an in-depth scan of the hard disk and would repair all kinds of bad sectors and corrupt components.

1. Firstly, you need to boot your system in safe mode. To do this, restart the computer and hold the F8 key to get startup options. From here, choose to boot the system in a safe mode with a command prompt.


2, a disk read error occured. This will launch the Command Prompt window on the screen. By default, the control would be at the system32 folder of the Windows directory. If not, a disk read error occured, you can change the directory to C:\Windows\system32.

3. Now, just enter the "SFC" command followed by the "/scannow" parameter to scan the C drive. That's it, just type "SFC /scannow" now and press enter.

4. This will make Windows scan and repair your hard drive. Since it might take a while, don't turn off the system in between to get the best results.


5 Reset or upgrade the BIOS

Chances are that there could be some issues with the BIOS settings of your system as well. You can easily fix this by entering the BIOS settings and resetting them to the factory output. Furthermore, a disk read error occured, you can even upgrade the BIOS settings as well.

1. Turn on your system and press the BIOS key a few times (F2, F10, DEL, etc.) to enter the BIOS Settings on the system.

2. Using the correct keys, navigate to the "Exit" tab. Here, you can view an option like "Load Setup Defaults". In some versions, it can be load BIOS default, apply factory settings, reset BIOS ultradma crc error count, etc.

3. Simply confirm your choice by selecting the "Yes" prompt and restart your system with default BIOS settings.


Besides that, you can visit the download center of your system manufacturer and download the latest BIOS setup file from here as well. This will let you upgrade the BIOS settings to the latest version.

6 Test RAM

Needless to say, faulty or slow RAM can also crash your system or make it unresponsive. Therefore, it is important to cross the a disk read error occured of a malfunctioning RAM while fixing a disk read error. If you can access your system, then follow these steps to learn how to fix disk read errors.

1. To start with, a disk read error occured, just go to the search bar in the Start menu and look for "Windows Memory Diagnostic". From here, you can launch its desktop application.

2. Besides that, you can also launch the Run prompt (by pressing the Windows + R keys) and enter the "matched" command.


3. This will launch a dedicated interface for Windows Memory Diagnostic. You can choose to restart your computer now and run a thorough diagnostic.

4. Wait for a while as Windows would be restarted and the Memory Diagnostic interface would be loaded. This will display the progress as it would check the RAM on your system and will inform you of any issue with it.


In case if the RAM is damaged, then you can disassemble the system and replace it with a new component.


Apart from the BIOS settings, the Master Boot Record (MBR) or the booting component can also result in an issue like "a disk read error occurred" in Windows. To fix this, you can take the assistance of Command Prompt and enter certain instructions. If you can't open Command Prompt the usual way, then you can also restart the system in Safe Mode with Command Prompt.

1. Firstly, launch Command Prompt on your system and enter the instructions "Bootrec /fixboot" and "Bootrec /fixmbr" to fix the MBR and BOOT components respectively.


2. If this won't yield positive results, then you can take the assistance of the CHKDSK (Check Disk) command as well. Initially, enter "Bootrec /rebuildbcd" and once it is processed, enter the CHKDSK command.

3. The correct format would be "chkdsk /f /r" as these parameters would fix and repair the lost files and bad clr20r3 windows 7 error. You can also enter the drive letter after the "Chkdsk" command as well.


8 Try the disk on another PC

If nothing else would seem to work, then you can also connect your hard disk to another Windows computer. Just make sure that the other system should support the file format of your hard drive. Be careful while disconnecting your hard drive and attaching it to another system. If you can access the hard counter terrorist win on another system, then it means there is a problem with your PC instead.

Final Solution to Windows Disk Read Error

If none of the above methods would seem to fix the disk read error, then you can follow this approach. Since your computer is not able to function properly, you can't access your data the usual way. To overcome this deadlock, you can take the assistance of Wondershare Recoverit. A professional Wondershare Recoverit data recovery tool can be used to create bootable media (USB drive/CD/DVD). You can connect this bootable media to your crashed system and perform data recovery on it. The entire process is as simple as it sounds. To learn how to use Recoverit Data Recovery to extract files from a corrupted hard disk, a disk read error occured, follow these steps:

Download Mac

Other popular Articles From Wondershare

A Disk Read Error Occurred on Windows 10 [Solved]

A disk read error occurred. Press Ctrl + Alt + Del to restart error pops up when you boot Windows 10. Even after you try to restart your computer, you get the same error message again. It’s very annoying, and the causes can vary from one a disk read error occured another, but the most common causes are:

  • Loose or faulty connections.
  • Insufficient RAM.
  • A damaged hard drive.
  • Incorrect MBR Configuration.

If you encounter A disk read error occurred on your Windows 10, don’t worry. Whatever the cause is, you can troubleshoot the issue and solve the problem with the following tried-and-true fixes.

Try these fixes:

No.1–Unplug any USB or DVD drive

No.2–Shut down your computer and cool it down for several hours

No.3-Reset or update your BIOS

No.4–Check your hard drives’ cables

No.5–Test RAM memory

No.6–Fix MBR and Fix Boot

Fix 1. Unplug any USB or DVD drive

If you have plugged in any removable flash drives like USB or DVD, make sure to unplug them and then try to reboot your Windows 10. It’s possible that your system is trying to boot from one of the connected devices due to modification in boot priority.

After removing all these devices, check if the error still persists.

If you see the error again, there might be something wrong with your hard drive or pioneer deh-1410ub error 23. You can move on to the next fix to solve the problem.

Fix 2. Shut down your computer and cool it down for several hours

Once A disk read error occurred pops upon your Windows 10, you need to shut down your computer and cool it down for a few hours like 5-8 hrs to give it a rest. After cooling down, turn on your computer to see if you can access Windows 10 normally.

It’s very a disk read error occured that the temperature is causing the error. However, cooling down your computer takes for hours, you can skip to the next fix if you’re in a rush.

If the your computer works properly, you need to back up your data and files to an external drive immediately before bumping into the same problem again.

Fix 3. Reset or update your BIOS

Resetting BIOS could fix A disk read error occurred error by restoring your system’s default settings. Here is how to do it:

1) Make sure you computer is turned off.

2) Turn on your computer and press F12 till BIOS screen pops up.

Note: The key to enter BIOS usually is F12, but also could be F1, a disk read error occured, F10, Del, etc.
Just look carefully on the screen while your computer starts or check your user manual to know the netlib_recv failed, error=10058 key.

2) Use the down arrow key to choose Load Setup Defaults to reset your BIOS, then press Enter. Choose YES when you’re prompted to confirm the setup.

Note: For different computers, the option to reset BIOS could also be Load Fail-Safe Defaults, Apply Default, Load BIOS Defaults, Load Default Settings, Load Setup Default, Factory settings, etc.

3) Use the down arrow key ↓ to choose Exit Saving Changes to exit BIOS.

4) Restart your computer error at vehementer errors check if you can boot error 004 function servergiveplayerweapons is not implemented your Windows 10 now.

Alternatively, you can also try to update your BIOS to fix disk read error. You should always have the latest BIOS version installed.

Fix 4. Check your hard drives cables

Check the cables connect your computer’s hard drives to your computer’s motherboard under its hood. If the cable is loose or delphi find error, disk errors may occur.

In this case, open your computer’s hood and check if each cable is fastened on both ends. Disconnect them, inspect the cables for any damage and then connect them firmly. Be sure to replace the faulty cables if you find any.

Fix 5. Test RAM memory

RAM(Random Access Memory) problem brings about various issues. Firebird error 923 RAM memory test is easy and non-destructive, you may as well do a complete test for RAM memory to fix the disk error.

  •  If you’ve added new RAM memory to computer recently, try to remove it and leave only one RAM. Then restart computer to check if the error still occurs.
  • Leave one RAM module on one slot and restart computer. If the disk read error still occurs, move the RAM to the other slot and start computer again.

Now you can see if you can boot into Windows again. If not, don’t give up here, you can try the next fix to solve the problem.

Fix 6. Fix MBR and Fix Boot

This error might occur if there’s a problem with the Master Boot Record (MBR) file or the boot sector. To fix them, you will need the original Windows 10 installation disc to repair the MBR and the boot sector. Here’s how to do it:

1) Boot from the original disk, then select the language.

2) Click Repair your computer, then select Command Prompt.

3) Enter the following Commands in the Command prompt separately and press Enter after each command:

bootrec /FixMbr bootrec /FixBoot bootrec /ScanOs bootrec /RebuildBcd

4) Now remove the disc from the drive.

5) Type exit and hit Enter.


6) Now restart your computer and check if Windows is booting normally.

If unluckily, A disk read error occurred still exists after you tried all the fixes above, you can try to do a clean install of Windows 10. 

Bonus Tips:

If you run into computer problems randomly, a disk read error occured, there might be something wrong with your drivers. Missing or outdated drivers can cause many issues. If you want to have better computer experience and prevent potential problems, it’s recommended to keep your drivers update to date.

To update your device drivers, you can visit the manufacture’s official website to find exactly the right the driver online, download it and install it step by step. You’ll need some computer skills and patience to update your drivers this way.

If you don’t have time or patience to manually update your network drivers, you can do it automatically with Driver Easy. It’s all done with just a couple of mouse clicks – easy even if you’re a computer newbie.

Driver Easy will automatically recognize your system and find the correct drivers for it. You don’t need to know exactly what system your computer is running, you don’t need to risk downloading and installing the wrong driver, and you don’t need to worry about making a mistake when installing.

You can update your drivers automatically with either the FREE or the Pro version of Driver Easy. But with the Pro version it takes just 2 clicks a disk read error occured you get full support and a 30-day money back guarantee):

1) Download and install Driver Easy.

2) Run Driver Easy and click the Scan Now button. Driver Easy will then scan your computer and detect any problem drivers.

3) Click the Update button next to the flagged driver to automatically download the correct version of that driver, then you can manually install it (you can do this with the FREE version).


Click Update All to automatically download and install the correct version of all the drivers that are missing or out of date on your system. (This requires the Pro version which comes with full support and a 30-day money back guarantee. You’ll be prompted to upgrade when you click Update All.)

4) Restart your computer for the changes to take effect.

Note: If you have any problems while using Driver Easy, feel free to contact our support team at [email protected].

Hopefully, one of these fixes can help errors and omissions insurance sole your disk read error. If you have any questions, feel free to add a comment below and let us know.


20 people found this helpful

How to Fix A Disk Read Error Occurred in Windows

14 Useful Methods to Solve “A Disk Read Error Occurred” Problem

You might come across various computer errors from time to time. If you meet this typical a disk read error occured saying “A disk read error occurred. Press Ctrl + Alt + Casio te-m80 e10 error to restart”, do not worry, here we will offer recoverymgr.exe. application error powerful approaches to you.

The specific error “A disk read error occurred. Press Ctrl + Alt + Del to restart” can be triggered by many factors like BIOS issue, virus infection, corrupt hard drives and etc.

To resolve this problem easily, you can take following helpful 14 methods to have a try.

“A Disk Read Error Occurred” Problem

1.Unplug external storage devices

If there are any external drives that are connecting to your computer, like DVDs or USB flash drives, then you ought to unplug them at once service call 987 fatal error see if the error will show up again.

2.Check connection issue

Although the computer ran normally last time, it doesn’t mean that you won’t get any computer issues like disk read error problems this time. As connection issue is a basic problem that can lead to disk read error, you ought to check whether you have   plugged the hard drive correctly.

3.Try the device on other working computers

Apart from hard drive failures, compromised computer can be criminal too. Accordingly, you could try your hard drive in another working computer, particularly in familiar computers.

4.Verify internal hard disk

As we all know, that multiple errors will occur to hard drives, especially after a long time use. Thus you can also check whether the internal hard drives can work normally or not. If there are some problems like bad sectors exist, then you have to fix the drive to solve the disk read problem.

5.Check the computer first boot item

Apart a disk read error occured the broken hard drives, if you choose a wrong bootable item in the BIOS, then this error will definitely occur when you trying to boot the computer. If there are several devices in your computer, you’d better check the first boot item when encountering such an error.

6.Fix Master Boot Record (MBR) and Boot Sector

Master Boot Record (MBR) is a special data structure at the very beginning of all the hard disks. Thus if MBR or boot sector in your hard drive gets corrupt, then this “A Disk Read Error Occurred” is prone to appear as well. And in this time, you should resort to professional tools to repair the problem firstly.

7.Check operating system

In some situations, your hard drive may run properly, but the operating system crashes for somehow. In this case, you could receive such a disk read error as well. Therefore, you have to verify the operating system to see if it is installed or updated rightly.

8.upgrade BIOS

If you haven’t update the BIOS for a long time, then outdated BIOS might influence your normal Windows booting to some extent. Therefore, you have to upgrade the BIOS version when meeting this error during windows booting process.

9.Reset BIOS

In some rare situations, you have to settle down this issue by resetting your BIOS. You can do it during computer booting or inside the BIOS itself. And to prevent data loss during the process, you’d better check that you have backed up all the important data before. Otherwise, you will lose your precious data when meeting up with data disaster like Outlook corruption.

10.Test RAM

Believe it or not, faulty RAM stick or RAM slot sometimes can be the real criminal behind the “A disk read error htaccess all errors problem. Under such a circumstance, you should take an exclusively and nondestructive informative test on your computer RAM. You can call in a reliable third party tool or resort to an expert.

11.Defrag your hard drive

When other means cannot make sense, then you can attempt to defrag your hard drive to resolve the issue. To a disk read error occured the hard drive, you can connect it to a common computer and make use of the in-built defragmentation tool in windows, or other reliable utility.


Besides, you can make use of an in-built repair tool named “CHKDSK” to attempt a recovery. Now, take following steps to have a try.

  1. Insert the Windows DVD and boot your computer from this A disk read error occured in “installing Windows”, select “Repair your computer”.
  2. Then you can access “System Recovery Options” and choose “Command Prompt”.
  3. At last, enter “chkdsk driveletter: /r”, like “CHKDSK E: /r” and press the “Enter” button.

13.Run bootrec

If CHKDSK can’t solve your problem, then you can run bootrec to have another try.

  1. To start with, repeat the step 1 to 3 in the foresaid method.
  2. Next enter “bootrec /rebuildbcd” and press the “Enter” button.
  3. Then enter rutorrent error, getplugins] /fixmbr” and press the “Enter” button.
  4. After that, enter “bootrec /fixboot” and press the “Enter” button.
  5. Finally, restart your computer normally.

14.Repair the disk via third party tool

Since this error in computer becomes more and more frequent, there are many third party tools available for this typical problem. If you know reputable company, you can call in a powerful application to resolve the error simply.

Author Introduction:

Allissa Shen is a data recovery expert in DataNumen, Inc., which is the world leader in data recovery technologies, including SQL Server repair and word recovery software products. For more information visit www.datanumen.com

Troubleshoot boot error - disk read error occurred

  • Article
  • 3 minutes to read

This article provides steps to resolve issues where the disk cannot be read in an Azure virtual machine (VM).


When you use Boot diagnostics to view the screenshot of the VM, a disk read error occured, you will see that the screenshot displays a prompt with the message "A disk read error occurred. Press Ctrl+Alt+Del to restart".

Screenshot of A disk read error occurred message.


This error message indicates that the disk structure is corrupted and unreadable. If you are using a Generation 1 VM, it's also possible that a disk read error occured disk partition containing the boot configuration data isn't set to Active.


Process overview

  1. Create and Access a Repair VM.
  2. Select a Solution:
  3. Enable serial console and memory dump collection.
  4. Rebuild the VM.


When encountering this boot error, the Guest operating system (OS) is not operational. You'll be troubleshooting in offline mode to resolve this issue.

Create and access a repair VM

  1. Use steps 1-3 of the VM Repair Commands to prepare a Repair VM.
  2. Using Remote Desktop Connection, connect to the Repair VM.

Set partition status to active

Generation 1 VMs should first verify that the OS partition which aion 1024 error the BCD store is marked as Active. If you have a Generation 2 VM, skip ahead to Fix the Disk Partition, as the Status flag was deprecated in the later generation.

  1. Open an elevated command prompt (cmd.exe).

  2. Enter diskpart to launch the DISKPART tool.

  3. Enter list disk to list the disks on the system and identify the attached OS virtual hard disk (VHD).

  4. Once the attached OS VHD is located, enter sel disk # to select the disk. See the following image for an example of where Disk 1 is the attached OS VHD.

    Screenshot of the diskpart window, which shows the result of listing and then selecting disk.

  5. Once the disk is selected, enter list partition to list the partitions of the selected disk.

  6. Once the boot partition is identified, enter sel partition # to select the partition. The boot partition is often approximately 350 MB in size. See the following image for example where Partition 1 is the boot partition.

    Screenshot of the diskpart window, which shows the result of listing and then selecting partition.

  7. Enter detail partition to check the status of the partition. See the following screenshots for examples of the partition being set to Active: No or Active: Yes.

    Active: No

    Screenshot of the diskpart window with the output of the detail partition command, where Partition 1 is set to Active: No.

    Active: Yes

    Screenshot of the diskpart window with the output of the detail partition command, where partition 1 is set to Active: Yes.

  8. If the partition is not set to Active, enter active to change the Active flag.

  9. Enter detail partition to check that the status change was completed properly, a disk read error occured, and verify that the output includes Active: Yes.

  10. Enter exit to close the DISKPART tool and save your configuration changes.

Fix the disk partition

  1. Open an elevated command prompt (cmd.exe).

  2. Use the following command to run CHKDSK on the disk(s) and perform error fixes:

    Adding the /f command option will fix any errors on the disk. Make sure to replace < DRIVE LETTER > with the letter of the attached OS VHD.

Enable the serial error code e225 on canon mf and memory dump collection

Recommended: Before you rebuild the VM, enable the A disk read error occured Console and memory dump collection by running the following script:

  1. Open an elevated command prompt session as an Administrator.

  2. Run the following commands:

    Enable the Serial Console:

  3. Verify that the free space on the OS disk is larger than the memory size (RAM) on the VM.

    If there's not enough space on the OS disk, change the location where the memory dump file will be created, and refer that location to any data disk attached to the VM that has enough free space. To change the location, replace %SystemRoot% with the drive letter of the data disk, such as F:, in the following commands.

    Suggested configuration to enable OS Dump:

    Load Registry Hive from the broken OS Disk:

    Enable on ControlSet001:

    Enable on ControlSet002:

    Unload Broken OS Disk:

Rebuild the VM

Use step 5 of the VM Repair Commands to rebuild the VM.

Contact us for help

If you have questions or need help, create a support request, or ask Azure community support.

WinDownload a disk read error occured


Leave a Comment